#ifndef __ASM_SYSTEM_H
#define __ASM_SYSTEM_H
-#include <linux/config.h>
#include <linux/kernel.h>
#include <asm/segment.h>
#include <asm/cpufeature.h>
struct task_struct; /* one of the stranger aspects of C forward declarations.. */
extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
+/*
+ * Saving eflags is important. It switches not only IOPL between tasks,
+ * it also protects other tasks from NT leaking through sysenter etc.
+ */
#define switch_to(prev,next,last) do { \
unsigned long esi,edi; \
- asm volatile("pushl %%ebp\n\t" \
+ asm volatile("pushfl\n\t" /* Save flags */ \
+ "pushl %%ebp\n\t" \
"movl %%esp,%0\n\t" /* save ESP */ \
"movl %5,%%esp\n\t" /* restore ESP */ \
"movl $1f,%1\n\t" /* save EIP */ \
"jmp __switch_to\n" \
"1:\t" \
"popl %%ebp\n\t" \
+ "popfl" \
:"=m" (prev->thread.esp),"=m" (prev->thread.eip), \
"=a" (last),"=S" (esi),"=D" (edi) \
:"m" (next->thread.esp),"m" (next->thread.eip), \
); } while(0)
#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , (base) )
-#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1)>>12 )
-
-static inline unsigned long _get_base(char * addr)
-{
- unsigned long __base;
- __asm__("movb %3,%%dh\n\t"
- "movb %2,%%dl\n\t"
- "shll $16,%%edx\n\t"
- "movw %1,%%dx"
- :"=&d" (__base)
- :"m" (*((addr)+2)),
- "m" (*((addr)+4)),
- "m" (*((addr)+7)));
- return __base;
-}
-
-#define get_base(ldt) _get_base( ((char *)&(ldt)) )
+#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1) )
/*
* Load a segment. Fall back on loading the zero
#define savesegment(seg, value) \
asm volatile("mov %%" #seg ",%0":"=rm" (value))
-/*
- * Clear and set 'TS' bit respectively
- */
-#define clts() __asm__ __volatile__ ("clts")
#define read_cr0() ({ \
unsigned int __dummy; \
__asm__ __volatile__( \
__dummy; \
})
#define write_cr0(x) \
- __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x))
#define read_cr2() ({ \
unsigned int __dummy; \
__dummy; \
})
#define write_cr2(x) \
- __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x))
#define read_cr3() ({ \
unsigned int __dummy; \
__dummy; \
})
#define write_cr3(x) \
- __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr3": :"r" (x))
#define read_cr4() ({ \
unsigned int __dummy; \
:"=r" (__dummy)); \
__dummy; \
})
-
#define read_cr4_safe() ({ \
unsigned int __dummy; \
/* This could fault if %cr4 does not exist */ \
: "=r" (__dummy): "0" (0)); \
__dummy; \
})
-
#define write_cr4(x) \
- __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x))
+
+/*
+ * Clear and set 'TS' bit respectively
+ */
+#define clts() __asm__ __volatile__ ("clts")
#define stts() write_cr0(8 | read_cr0())
#endif /* __KERNEL__ */
#define wbinvd() \
- __asm__ __volatile__ ("wbinvd": : :"memory");
+ __asm__ __volatile__ ("wbinvd": : :"memory")
static inline unsigned long get_limit(unsigned long segment)
{
#define cmpxchg(ptr,o,n)\
((__typeof__(*(ptr)))__cmpxchg((ptr),(unsigned long)(o),\
(unsigned long)(n),sizeof(*(ptr))))
+#define sync_cmpxchg(ptr,o,n)\
+ ((__typeof__(*(ptr)))__sync_cmpxchg((ptr),(unsigned long)(o),\
+ (unsigned long)(n),sizeof(*(ptr))))
#endif
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
return old;
}
+/*
+ * Always use locked operations when touching memory shared with a
+ * hypervisor, since the system may be SMP even if the guest kernel
+ * isn't.
+ */
+static inline unsigned long __sync_cmpxchg(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long prev;
+ switch (size) {
+ case 1:
+ __asm__ __volatile__("lock; cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ case 2:
+ __asm__ __volatile__("lock; cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ case 4:
+ __asm__ __volatile__("lock; cmpxchgl %1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ }
+ return old;
+}
+
#ifndef CONFIG_X86_CMPXCHG
/*
* Building a kernel capable running on 80386. It may be necessary to
#endif
-#ifdef __KERNEL__
-struct alt_instr {
- __u8 *instr; /* original instruction */
- __u8 *replacement;
- __u8 cpuid; /* cpuid bit set for replacement */
- __u8 instrlen; /* length of original instruction */
- __u8 replacementlen; /* length of new instruction, <= instrlen */
- __u8 pad;
-};
-#endif
-
-/*
- * Alternative instructions for different CPU types or capabilities.
- *
- * This allows to use optimized instructions even on generic binary
- * kernels.
- *
- * length of oldinstr must be longer or equal the length of newinstr
- * It can be padded with nops as needed.
- *
- * For non barrier like inlines please define new variants
- * without volatile and memory clobber.
- */
-#define alternative(oldinstr, newinstr, feature) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- " .align 4\n" \
- " .long 661b\n" /* label */ \
- " .long 663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature) : "memory")
-
-/*
- * Alternative inline assembly with input.
- *
- * Pecularities:
- * No memory clobber here.
- * Argument numbers start with 1.
- * Best is to use constraints that are fixed size (like (%1) ... "r")
- * If you use variable sized constraints like "m" or "g" in the
- * replacement maake sure to pad to the worst case length.
- */
-#define alternative_input(oldinstr, newinstr, feature, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- " .align 4\n" \
- " .long 661b\n" /* label */ \
- " .long 663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature), ##input)
-
/*
* Force strict CPU ordering.
* And yes, this is required on UP too when we're talking
* does not enforce ordering, since there is no data dependency between
* the read of "a" and the read of "b". Therefore, on some CPUs, such
* as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like thiswhere there are no data dependencies.
+ * in cases like this where there are no data dependencies.
**/
#define read_barrier_depends() do { } while(0)
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { xchg(&var, value); } while (0)
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define set_mb(var, value) do { var = value; barrier(); } while (0)
#endif
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
-/* interrupt control.. */
-#define local_save_flags(x) do { typecheck(unsigned long,x); __asm__ __volatile__("pushfl ; popl %0":"=g" (x): /* no input */); } while (0)
-#define local_irq_restore(x) do { typecheck(unsigned long,x); __asm__ __volatile__("pushl %0 ; popfl": /* no output */ :"g" (x):"memory", "cc"); } while (0)
-#define local_irq_disable() __asm__ __volatile__("cli": : :"memory")
-#define local_irq_enable() __asm__ __volatile__("sti": : :"memory")
-/* used in the idle loop; sti takes one instruction cycle to complete */
-#define safe_halt() __asm__ __volatile__("sti; hlt": : :"memory")
-/* used when interrupts are already enabled or to shutdown the processor */
-#define halt() __asm__ __volatile__("hlt": : :"memory")
-
-#define irqs_disabled() \
-({ \
- unsigned long flags; \
- local_save_flags(flags); \
- !(flags & (1<<9)); \
-})
-
-/* For spinlocks etc */
-#define local_irq_save(x) __asm__ __volatile__("pushfl ; popl %0 ; cli":"=g" (x): /* no input */ :"memory")
+#include <linux/irqflags.h>
/*
* disable hlt during certain critical i/o operations
extern int es7000_plat;
void cpu_idle_wait(void);
+/*
+ * On SMP systems, when the scheduler does migration-cost autodetection,
+ * it needs a way to flush as much of the CPU's caches as possible:
+ */
+static inline void sched_cacheflush(void)
+{
+ wbinvd();
+}
+
extern unsigned long arch_align_stack(unsigned long sp);
+extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
+
+void default_idle(void);
#endif