[NETFILTER]: arp_tables: use XT_ALIGN

[safe/jmp/linux-2.6] / include / asm-arm / arch-s3c2410 / system.h

diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 9b0d850..14de4e5 100644 (file)
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -1,36 +1,33 @@
 /* linux/include/asm-arm/arch-s3c2410/system.h
  *
- * (c) 2003 Simtec Electronics
- *  Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2003 Simtec Electronics
+ *     Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - System function defines and includes
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  12-May-2003 BJD  Created file
- *  14-May-2003 BJD  Removed idle to aid debugging
- *  12-Jun-2003 BJD  Added reset via watchdog
- *  04-Sep-2003 BJD  Moved to v2.6
- *  28-Oct-2004 BJD  Added over-ride for idle, and fixed reset panic()
- */
+*/
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 
 #include <asm/arch/map.h>
 #include <asm/arch/idle.h>
+#include <asm/arch/reset.h>
 
-#include <asm/arch/regs-watchdog.h>
+#include <asm/plat-s3c/regs-watchdog.h>
 #include <asm/arch/regs-clock.h>
 
+#include <linux/clk.h>
+#include <linux/err.h>
+
 void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
 
 void s3c24xx_default_idle(void)
 {
-       void __iomem *reg = S3C2410_CLKCON;
        unsigned long tmp;
        int i;
 
@@ -40,16 +37,18 @@ void s3c24xx_default_idle(void)
 
        /* Warning: going into idle state upsets jtag scanning */
 
-       __raw_writel(__raw_readl(reg) | (1<<2), reg);
+       __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+                    S3C2410_CLKCON);
 
        /* the samsung port seems to do a loop and then unset idle.. */
        for (i = 0; i < 50; i++) {
-               tmp += __raw_readl(reg); /* ensure loop not optimised out */
+               tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
        }
 
        /* this bit is not cleared on re-start... */
 
-       __raw_writel(__raw_readl(reg) & ~(1<<2), reg);
+       __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+                    S3C2410_CLKCON);
 }
 
 static void arch_idle(void)
@@ -60,31 +59,44 @@ static void arch_idle(void)
                s3c24xx_default_idle();
 }
 
-
 static void
 arch_reset(char mode)
 {
+       struct clk *wdtclk;
+
        if (mode == 's') {
                cpu_reset(0);
        }
 
+       if (s3c24xx_reset_hook)
+               s3c24xx_reset_hook();
+
        printk("arch_reset: attempting watchdog reset\n");
 
        __raw_writel(0, S3C2410_WTCON);   /* disable watchdog, to be safe  */
 
+       wdtclk = clk_get(NULL, "watchdog");
+       if (!IS_ERR(wdtclk)) {
+               clk_enable(wdtclk);
+       } else
+               printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
        /* put initial values into count and data */
-       __raw_writel(0x100, S3C2410_WTCNT);
-       __raw_writel(0x100, S3C2410_WTDAT);
+       __raw_writel(0x80, S3C2410_WTCNT);
+       __raw_writel(0x80, S3C2410_WTDAT);
 
        /* set the watchdog to go and reset... */
        __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
-                    S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+                    S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
 
        /* wait for reset to assert... */
-       mdelay(5000);
+       mdelay(500);
 
        printk(KERN_ERR "Watchdog reset failed to assert reset\n");
 
+       /* delay to allow the serial port to show the message */
+       mdelay(50);
+
        /* we'll take a jump through zero as a poor second */
        cpu_reset(0);
 }