*****************************************************************************/
/*
- * Copyright (C) 2000 - 2005, R. Byron Moore
+ * Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
#define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
+/* Size calculation */
+
+#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0]))
+
#if ACPI_MACHINE_WIDTH == 16
/*
* For 16-bit addresses, we have to assume that the upper 32 bits
- * are zero.
+ * (out of 64) are zero.
*/
#define ACPI_LODWORD(l) ((u32)(l))
#define ACPI_HIDWORD(l) ((u32)(0))
* printf() format helpers
*/
-/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
+/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i),ACPI_LODWORD(i)
/*
- * Extract a byte of data using a pointer. Any more than a byte and we
- * get into potential aligment issues -- see the STORE macros below
+ * Extract data using a pointer. Any more than a byte and we
+ * get into potential aligment issues -- see the STORE macros below.
+ * Use with care.
*/
#define ACPI_GET8(ptr) *ACPI_CAST_PTR (u8, ptr)
#define ACPI_GET16(ptr) *ACPI_CAST_PTR (u16, ptr)
#define ACPI_SET32(ptr) *ACPI_CAST_PTR (u32, ptr)
#define ACPI_SET64(ptr) *ACPI_CAST_PTR (u64, ptr)
-/* Pointer manipulation */
-
-#define ACPI_CAST_PTR(t, p) ((t *)(void *)(p))
-#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **)(void *)(p))
-#define ACPI_ADD_PTR(t,a,b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8, (a)) + (acpi_native_uint)(b)))
-#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) ((char *)(a) - (char *)(b))
+/*
+ * Pointer manipulation
+ */
+#define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p))
+#define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p))
+#define ACPI_ADD_PTR(t,a,b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b)))
+#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b)))
/* Pointer/Integer type conversions */
-#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL,(acpi_native_uint)i)
+#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL)
#define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
-#define ACPI_FADT_OFFSET(f) ACPI_OFFSET (FADT_DESCRIPTOR, f)
#if ACPI_MACHINE_WIDTH == 16
#define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s)
#define ACPI_PHYSADDR_TO_PTR(i) (void *)(i)
-#define ACPI_PTR_TO_PHYSADDR(i) (u32) (char *)(i)
+#define ACPI_PTR_TO_PHYSADDR(i) (u32) ACPI_CAST_PTR (u8,(i))
#else
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
#endif
+#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
+#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b)))
+#else
+#define ACPI_COMPARE_NAME(a,b) (!ACPI_STRNCMP (ACPI_CAST_PTR (char,(a)), ACPI_CAST_PTR (char,(b)), ACPI_NAME_SIZE))
+#endif
+
/*
* Macros for moving data around to/from buffers that are possibly unaligned.
* If the hardware supports the transfer of unaligned data, just do the store.
#define ACPI_MUL_16(a) _ACPI_MUL(a,4)
#define ACPI_MOD_16(a) _ACPI_MOD(a,16)
+#define ACPI_DIV_32(a) _ACPI_DIV(a,5)
+#define ACPI_MUL_32(a) _ACPI_MUL(a,5)
+#define ACPI_MOD_32(a) _ACPI_MOD(a,32)
+
/*
* Rounding macros (Power of two boundaries only)
*/
-#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & (~(((acpi_native_uint) boundary)-1)))
-#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + (((acpi_native_uint) boundary)-1)) & (~(((acpi_native_uint) boundary)-1)))
+#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & \
+ (~(((acpi_native_uint) boundary)-1)))
-#define ACPI_ROUND_DOWN_TO_32_BITS(a) ACPI_ROUND_DOWN(a,4)
-#define ACPI_ROUND_DOWN_TO_64_BITS(a) ACPI_ROUND_DOWN(a,8)
-#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,ALIGNED_ADDRESS_BOUNDARY)
+#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + \
+ (((acpi_native_uint) boundary)-1)) & \
+ (~(((acpi_native_uint) boundary)-1)))
-#define ACPI_ROUND_UP_to_32_bITS(a) ACPI_ROUND_UP(a,4)
-#define ACPI_ROUND_UP_to_64_bITS(a) ACPI_ROUND_UP(a,8)
-#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,ALIGNED_ADDRESS_BOUNDARY)
+/* Note: sizeof(acpi_native_uint) evaluates to either 2, 4, or 8 */
-#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7)
-#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a))
+#define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a,4)
+#define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a,8)
+#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,sizeof(acpi_native_uint))
-#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10)
+#define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a,4)
+#define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a,8)
+#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,sizeof(acpi_native_uint))
+
+#define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7)
+#define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a))
+
+#define ACPI_ROUND_UP_TO_1K(a) (((a) + 1023) >> 10)
/* Generic (non-power-of-two) rounding */
-#define ACPI_ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary))
+#define ACPI_ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary))
+
+#define ACPI_IS_MISALIGNED(value) (((acpi_native_uint)value) & (sizeof(acpi_native_uint)-1))
/*
* Bitmask creation
* MASK_BITS_ABOVE creates a mask starting AT the position and above
* MASK_BITS_BELOW creates a mask starting one bit BELOW the position
*/
-#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position))))
-#define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position)))
+#define ACPI_MASK_BITS_ABOVE(position) (~((ACPI_INTEGER_MAX) << ((u32) (position))))
+#define ACPI_MASK_BITS_BELOW(position) ((ACPI_INTEGER_MAX) << ((u32) (position)))
-#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7'))
+#define ACPI_IS_OCTAL_DIGIT(d) (((char)(d) >= '0') && ((char)(d) <= '7'))
/* Bitfields within ACPI registers */
#define ACPI_REGISTER_PREPARE_BITS(val, pos, mask) ((val << pos) & mask)
#define ACPI_REGISTER_INSERT_VALUE(reg, pos, mask, val) reg = (reg & (~(mask))) | ACPI_REGISTER_PREPARE_BITS(val, pos, mask)
+#define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask))
+
/* Generate a UUID */
-#define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
- (b) & 0xFF, ((b) >> 8) & 0xFF, \
- (c) & 0xFF, ((c) >> 8) & 0xFF, \
- (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
+#define ACPI_INIT_UUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \
+ (a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
+ (b) & 0xFF, ((b) >> 8) & 0xFF, \
+ (c) & 0xFF, ((c) >> 8) & 0xFF, \
+ (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
/*
* An struct acpi_namespace_node * can appear in some contexts,
*
* The "Descriptor" field is the first field in both structures.
*/
-#define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->descriptor_id)
-#define ACPI_SET_DESCRIPTOR_TYPE(d,t) (((union acpi_descriptor *)(void *)(d))->descriptor_id = t)
+#define ACPI_GET_DESCRIPTOR_TYPE(d) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type)
+#define ACPI_SET_DESCRIPTOR_TYPE(d,t) (((union acpi_descriptor *)(void *)(d))->common.descriptor_type = t)
/* Macro to test the object type */
#define GET_CURRENT_ARG_TYPE(list) (list & ((u32) 0x1F))
#define INCREMENT_ARG_LIST(list) (list >>= ((u32) ARG_TYPE_WIDTH))
+#if defined (ACPI_DEBUG_OUTPUT) || !defined (ACPI_NO_ERROR_MESSAGES)
/*
- * Reporting macros that are never compiled out
+ * Module name is include in both debug and non-debug versions primarily for
+ * error messages. The __FILE__ macro is not very useful for this, because it
+ * often includes the entire pathname to the module
*/
-#define ACPI_PARAM_LIST(pl) pl
+#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name;
+#else
+#define ACPI_MODULE_NAME(name)
+#endif
/*
- * Error reporting. These versions add callers module and line#.
- *
- * Since _acpi_module_name gets compiled out when ACPI_DEBUG_OUTPUT
- * isn't defined, only use it in debug mode.
+ * Ascii error messages can be configured out
*/
-#ifdef ACPI_DEBUG_OUTPUT
-
-#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info(_acpi_module_name,__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error(_acpi_module_name,__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning(_acpi_module_name,__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error(_acpi_module_name,__LINE__,_COMPONENT, s, e);
+#ifndef ACPI_NO_ERROR_MESSAGES
+#define AE_INFO _acpi_module_name, __LINE__
-#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error(_acpi_module_name,__LINE__,_COMPONENT, s, n, p, e);
+/*
+ * Error reporting. Callers module and line number are inserted by AE_INFO,
+ * the plist contains a set of parens to allow variable-length lists.
+ * These macros are used for both the debug and non-debug versions of the code.
+ */
+#define ACPI_INFO(plist) acpi_ut_info plist
+#define ACPI_WARNING(plist) acpi_ut_warning plist
+#define ACPI_EXCEPTION(plist) acpi_ut_exception plist
+#define ACPI_ERROR(plist) acpi_ut_error plist
+#define ACPI_ERROR_NAMESPACE(s,e) acpi_ns_report_error (AE_INFO, s, e);
+#define ACPI_ERROR_METHOD(s,n,p,e) acpi_ns_report_method_error (AE_INFO, s, n, p, e);
#else
-#define ACPI_REPORT_INFO(fp) {acpi_ut_report_info("ACPI",__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_ERROR(fp) {acpi_ut_report_error("ACPI",__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_WARNING(fp) {acpi_ut_report_warning("ACPI",__LINE__,_COMPONENT); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define ACPI_REPORT_NSERROR(s,e) acpi_ns_report_error("ACPI",__LINE__,_COMPONENT, s, e);
-
-#define ACPI_REPORT_METHOD_ERROR(s,n,p,e) acpi_ns_report_method_error("ACPI",__LINE__,_COMPONENT, s, n, p, e);
+/* No error messages */
+#define ACPI_INFO(plist)
+#define ACPI_WARNING(plist)
+#define ACPI_EXCEPTION(plist)
+#define ACPI_ERROR(plist)
+#define ACPI_ERROR_NAMESPACE(s,e)
+#define ACPI_ERROR_METHOD(s,n,p,e)
#endif
-/* Error reporting. These versions pass thru the module and line# */
-
-#define _ACPI_REPORT_INFO(a,b,c,fp) {acpi_ut_report_info(a,b,c); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define _ACPI_REPORT_ERROR(a,b,c,fp) {acpi_ut_report_error(a,b,c); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-#define _ACPI_REPORT_WARNING(a,b,c,fp) {acpi_ut_report_warning(a,b,c); \
- acpi_os_printf ACPI_PARAM_LIST(fp);}
-
/*
* Debug macros that are conditionally compiled
*/
#ifdef ACPI_DEBUG_OUTPUT
-#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name;
/*
* Common parameters used for debug output functions:
#define ACPI_GET_FUNCTION_NAME _acpi_function_name
/*
* The Name parameter should be the procedure name as a quoted string.
- * This is declared as a local string ("my_function_name") so that it can
+ * This is declared as a local string ("MyFunctionName") so that it can
* be also used by the function exit macros below.
* Note: (const char) is used to be compatible with the debug interfaces
* and macros such as __FUNCTION__.
*/
-#define ACPI_FUNCTION_NAME(name) const char *_acpi_function_name = name;
+#define ACPI_FUNCTION_NAME(name) const char *_acpi_function_name = #name;
#else
/* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */
#endif
#define ACPI_FUNCTION_TRACE(a) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
+ acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
#define ACPI_FUNCTION_TRACE_PTR(a,b) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
+ acpi_ut_trace_ptr(ACPI_DEBUG_PARAMETERS,(void *)b)
#define ACPI_FUNCTION_TRACE_U32(a,b) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
+ acpi_ut_trace_u32(ACPI_DEBUG_PARAMETERS,(u32)b)
#define ACPI_FUNCTION_TRACE_STR(a,b) ACPI_FUNCTION_NAME(a) \
- acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
+ acpi_ut_trace_str(ACPI_DEBUG_PARAMETERS,(char *)b)
#define ACPI_FUNCTION_ENTRY() acpi_ut_track_stack_ptr()
* WARNING: These macros include a return statement. This is usually considered
* bad form, but having a separate exit macro is very ugly and difficult to maintain.
* One of the FUNCTION_TRACE macros above must be used in conjunction with these macros
- * so that "_acpi_function_name" is defined.
+ * so that "_AcpiFunctionName" is defined.
*
* Note: the DO_WHILE0 macro is used to prevent some compilers from complaining
* about these constructs.
#define ACPI_DUMP_PATHNAME(a,b,c,d) acpi_ns_dump_pathname(a,b,c,d)
#define ACPI_DUMP_RESOURCE_LIST(a) acpi_rs_dump_resource_list(a)
#define ACPI_DUMP_BUFFER(a,b) acpi_ut_dump_buffer((u8 *)a,b,DB_BYTE_DISPLAY,_COMPONENT)
-#define ACPI_BREAK_MSG(a) acpi_os_signal (ACPI_SIGNAL_BREAKPOINT,(a))
-
-/*
- * Generate INT3 on ACPI_ERROR (Debug only!)
- */
-#define ACPI_ERROR_BREAK
-#ifdef ACPI_ERROR_BREAK
-#define ACPI_BREAK_ON_ERROR(lvl) if ((lvl)&ACPI_ERROR) \
- acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,"Fatal error encountered\n")
-#else
-#define ACPI_BREAK_ON_ERROR(lvl)
-#endif
/*
* Master debug print macros
* 1) Debug print for the current component is enabled
* 2) Debug error level or trace level for the print statement is enabled
*/
-#define ACPI_DEBUG_PRINT(pl) acpi_ut_debug_print ACPI_PARAM_LIST(pl)
-#define ACPI_DEBUG_PRINT_RAW(pl) acpi_ut_debug_print_raw ACPI_PARAM_LIST(pl)
+#define ACPI_DEBUG_PRINT(plist) acpi_ut_debug_print plist
+#define ACPI_DEBUG_PRINT_RAW(plist) acpi_ut_debug_print_raw plist
#else
/*
* This is the non-debug case -- make everything go away,
* leaving no executable debug code!
*/
-#define ACPI_MODULE_NAME(name)
-#define _acpi_module_name ""
-
#define ACPI_DEBUG_EXEC(a)
#define ACPI_NORMAL_EXEC(a) a;
#define ACPI_DUMP_STACK_ENTRY(a)
#define ACPI_DUMP_OPERANDS(a,b,c,d,e)
#define ACPI_DUMP_ENTRY(a,b)
+#define ACPI_DUMP_TABLES(a,b)
#define ACPI_DUMP_PATHNAME(a,b,c,d)
#define ACPI_DUMP_RESOURCE_LIST(a)
#define ACPI_DUMP_BUFFER(a,b)
#define ACPI_DEBUG_PRINT(pl)
#define ACPI_DEBUG_PRINT_RAW(pl)
-#define ACPI_BREAK_MSG(a)
#define return_VOID return
#define return_ACPI_STATUS(s) return(s)
/* Memory allocation */
-#define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_MEM_FREE(a) acpi_os_free(a)
+#ifndef ACPI_ALLOCATE
+#define ACPI_ALLOCATE(a) acpi_ut_allocate((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
+#endif
+#ifndef ACPI_ALLOCATE_ZEROED
+#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
+#endif
+#ifndef ACPI_FREE
+#define ACPI_FREE(a) acpio_os_free(a)
+#endif
#define ACPI_MEM_TRACKING(a)
#else
/* Memory allocation */
-#define ACPI_MEM_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_MEM_CALLOCATE(a) acpi_ut_callocate_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_MEM_FREE(a) acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
-#define ACPI_MEM_TRACKING(a) a
+#define ACPI_ALLOCATE(a) acpi_ut_allocate_and_track((acpi_size)(a),_COMPONENT,_acpi_module_name,__LINE__)
+#define ACPI_ALLOCATE_ZEROED(a) acpi_ut_allocate_zeroed_and_track((acpi_size)(a), _COMPONENT,_acpi_module_name,__LINE__)
+#define ACPI_FREE(a) acpi_ut_free_and_track(a,_COMPONENT,_acpi_module_name,__LINE__)
+#define ACPI_MEM_TRACKING(a) a
#endif /* ACPI_DBG_TRACK_ALLOCATIONS */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff