#include "xfs_ialloc.h"
#include "xfs_attr.h"
#include "xfs_bmap.h"
-#include "xfs_acl.h"
#include "xfs_error.h"
#include "xfs_buf_item.h"
#include "xfs_rw.h"
-
-/*
- * This is a subroutine for xfs_write() and other writers (xfs_ioctl)
- * which clears the setuid and setgid bits when a file is written.
- */
-int
-xfs_write_clear_setuid(
- xfs_inode_t *ip)
-{
- xfs_mount_t *mp;
- xfs_trans_t *tp;
- int error;
-
- mp = ip->i_mount;
- tp = xfs_trans_alloc(mp, XFS_TRANS_WRITEID);
- if ((error = xfs_trans_reserve(tp, 0,
- XFS_WRITEID_LOG_RES(mp),
- 0, 0, 0))) {
- xfs_trans_cancel(tp, 0);
- return error;
- }
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
- xfs_trans_ihold(tp, ip);
- ip->i_d.di_mode &= ~S_ISUID;
-
- /*
- * Note that we don't have to worry about mandatory
- * file locking being disabled here because we only
- * clear the S_ISGID bit if the Group execute bit is
- * on, but if it was on then mandatory locking wouldn't
- * have been enabled.
- */
- if (ip->i_d.di_mode & S_IXGRP) {
- ip->i_d.di_mode &= ~S_ISGID;
- }
- xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- xfs_trans_set_sync(tp);
- error = xfs_trans_commit(tp, 0);
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- return 0;
-}
-
-/*
- * Handle logging requirements of various synchronous types of write.
- */
-int
-xfs_write_sync_logforce(
- xfs_mount_t *mp,
- xfs_inode_t *ip)
-{
- int error = 0;
-
- /*
- * If we're treating this as O_DSYNC and we have not updated the
- * size, force the log.
- */
- if (!(mp->m_flags & XFS_MOUNT_OSYNCISOSYNC) &&
- !(ip->i_update_size)) {
- xfs_inode_log_item_t *iip = ip->i_itemp;
-
- /*
- * If an allocation transaction occurred
- * without extending the size, then we have to force
- * the log up the proper point to ensure that the
- * allocation is permanent. We can't count on
- * the fact that buffered writes lock out direct I/O
- * writes - the direct I/O write could have extended
- * the size nontransactionally, then finished before
- * we started. xfs_write_file will think that the file
- * didn't grow but the update isn't safe unless the
- * size change is logged.
- *
- * Force the log if we've committed a transaction
- * against the inode or if someone else has and
- * the commit record hasn't gone to disk (e.g.
- * the inode is pinned). This guarantees that
- * all changes affecting the inode are permanent
- * when we return.
- */
- if (iip && iip->ili_last_lsn) {
- error = _xfs_log_force(mp, iip->ili_last_lsn,
- XFS_LOG_FORCE | XFS_LOG_SYNC, NULL);
- } else if (xfs_ipincount(ip) > 0) {
- error = _xfs_log_force(mp, (xfs_lsn_t)0,
- XFS_LOG_FORCE | XFS_LOG_SYNC, NULL);
- }
-
- } else {
- xfs_trans_t *tp;
-
- /*
- * O_SYNC or O_DSYNC _with_ a size update are handled
- * the same way.
- *
- * If the write was synchronous then we need to make
- * sure that the inode modification time is permanent.
- * We'll have updated the timestamp above, so here
- * we use a synchronous transaction to log the inode.
- * It's not fast, but it's necessary.
- *
- * If this a dsync write and the size got changed
- * non-transactionally, then we need to ensure that
- * the size change gets logged in a synchronous
- * transaction.
- */
- tp = xfs_trans_alloc(mp, XFS_TRANS_WRITE_SYNC);
- if ((error = xfs_trans_reserve(tp, 0,
- XFS_SWRITE_LOG_RES(mp),
- 0, 0, 0))) {
- /* Transaction reserve failed */
- xfs_trans_cancel(tp, 0);
- } else {
- /* Transaction reserve successful */
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
- xfs_trans_ihold(tp, ip);
- xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- xfs_trans_set_sync(tp);
- error = xfs_trans_commit(tp, 0);
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- }
- }
-
- return error;
-}
+#include "xfs_trace.h"
/*
* Force a shutdown of the filesystem instantly while keeping
}
}
-
-/*
- * Called when we want to stop a buffer from getting written or read.
- * We attach the EIO error, muck with its flags, and call biodone
- * so that the proper iodone callbacks get called.
- */
-int
-xfs_bioerror(
- xfs_buf_t *bp)
-{
-
-#ifdef XFSERRORDEBUG
- ASSERT(XFS_BUF_ISREAD(bp) || bp->b_iodone);
-#endif
-
- /*
- * No need to wait until the buffer is unpinned.
- * We aren't flushing it.
- */
- xfs_buftrace("XFS IOERROR", bp);
- XFS_BUF_ERROR(bp, EIO);
- /*
- * We're calling biodone, so delete B_DONE flag. Either way
- * we have to call the iodone callback, and calling biodone
- * probably is the best way since it takes care of
- * GRIO as well.
- */
- XFS_BUF_UNREAD(bp);
- XFS_BUF_UNDELAYWRITE(bp);
- XFS_BUF_UNDONE(bp);
- XFS_BUF_STALE(bp);
-
- XFS_BUF_CLR_BDSTRAT_FUNC(bp);
- xfs_biodone(bp);
-
- return (EIO);
-}
-
-/*
- * Same as xfs_bioerror, except that we are releasing the buffer
- * here ourselves, and avoiding the biodone call.
- * This is meant for userdata errors; metadata bufs come with
- * iodone functions attached, so that we can track down errors.
- */
-int
-xfs_bioerror_relse(
- xfs_buf_t *bp)
-{
- int64_t fl;
-
- ASSERT(XFS_BUF_IODONE_FUNC(bp) != xfs_buf_iodone_callbacks);
- ASSERT(XFS_BUF_IODONE_FUNC(bp) != xlog_iodone);
-
- xfs_buftrace("XFS IOERRELSE", bp);
- fl = XFS_BUF_BFLAGS(bp);
- /*
- * No need to wait until the buffer is unpinned.
- * We aren't flushing it.
- *
- * chunkhold expects B_DONE to be set, whether
- * we actually finish the I/O or not. We don't want to
- * change that interface.
- */
- XFS_BUF_UNREAD(bp);
- XFS_BUF_UNDELAYWRITE(bp);
- XFS_BUF_DONE(bp);
- XFS_BUF_STALE(bp);
- XFS_BUF_CLR_IODONE_FUNC(bp);
- XFS_BUF_CLR_BDSTRAT_FUNC(bp);
- if (!(fl & XFS_B_ASYNC)) {
- /*
- * Mark b_error and B_ERROR _both_.
- * Lot's of chunkcache code assumes that.
- * There's no reason to mark error for
- * ASYNC buffers.
- */
- XFS_BUF_ERROR(bp, EIO);
- XFS_BUF_V_IODONESEMA(bp);
- } else {
- xfs_buf_relse(bp);
- }
- return (EIO);
-}
-
/*
* Prints out an ALERT message about I/O error.
*/
xfs_buf_t *bp;
int error;
- if (flags)
- bp = xfs_buf_read_flags(target, blkno, len, flags);
- else
- bp = xfs_buf_read(target, blkno, len, flags);
+ if (!flags)
+ flags = XBF_LOCK | XBF_MAPPED;
+
+ bp = xfs_buf_read(target, blkno, len, flags);
if (!bp)
return XFS_ERROR(EIO);
error = XFS_BUF_GETERROR(bp);
}
/*
- * Wrapper around bwrite() so that we can trap
- * write errors, and act accordingly.
+ * helper function to extract extent size hint from inode
*/
-int
-xfs_bwrite(
- struct xfs_mount *mp,
- struct xfs_buf *bp)
+xfs_extlen_t
+xfs_get_extsz_hint(
+ struct xfs_inode *ip)
{
- int error;
-
- /*
- * XXXsup how does this work for quotas.
- */
- XFS_BUF_SET_BDSTRAT_FUNC(bp, xfs_bdstrat_cb);
- XFS_BUF_SET_FSPRIVATE3(bp, mp);
- XFS_BUF_WRITE(bp);
+ xfs_extlen_t extsz;
- if ((error = XFS_bwrite(bp))) {
- ASSERT(mp);
- /*
- * Cannot put a buftrace here since if the buffer is not
- * B_HOLD then we will brelse() the buffer before returning
- * from bwrite and we could be tracing a buffer that has
- * been reused.
- */
- xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR);
+ if (unlikely(XFS_IS_REALTIME_INODE(ip))) {
+ extsz = (ip->i_d.di_flags & XFS_DIFLAG_EXTSIZE)
+ ? ip->i_d.di_extsize
+ : ip->i_mount->m_sb.sb_rextsize;
+ ASSERT(extsz);
+ } else {
+ extsz = (ip->i_d.di_flags & XFS_DIFLAG_EXTSIZE)
+ ? ip->i_d.di_extsize : 0;
}
- return (error);
+
+ return extsz;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff