if BLOCK
-config EXT2_FS
- tristate "Second extended fs support"
- help
- Ext2 is a standard Linux file system for hard disks.
-
- To compile this file system support as a module, choose M here: the
- module will be called ext2.
-
- If unsure, say Y.
-
-config EXT2_FS_XATTR
- bool "Ext2 extended attributes"
- depends on EXT2_FS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config EXT2_FS_POSIX_ACL
- bool "Ext2 POSIX Access Control Lists"
- depends on EXT2_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT2_FS_SECURITY
- bool "Ext2 Security Labels"
- depends on EXT2_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT2_FS_XIP
- bool "Ext2 execute in place support"
- depends on EXT2_FS && MMU
- help
- Execute in place can be used on memory-backed block devices. If you
- enable this option, you can select to mount block devices which are
- capable of this feature without using the page cache.
-
- If you do not use a block device that is capable of using this,
- or if unsure, say N.
+source "fs/ext2/Kconfig"
+source "fs/ext3/Kconfig"
+source "fs/ext4/Kconfig"
config FS_XIP
# execute in place
depends on EXT2_FS_XIP
default y
-config EXT3_FS
- tristate "Ext3 journalling file system support"
- select JBD
- help
- This is the journalling version of the Second extended file system
- (often called ext3), the de facto standard Linux file system
- (method to organize files on a storage device) for hard disks.
-
- The journalling code included in this driver means you do not have
- to run e2fsck (file system checker) on your file systems after a
- crash. The journal keeps track of any changes that were being made
- at the time the system crashed, and can ensure that your file system
- is consistent without the need for a lengthy check.
-
- Other than adding the journal to the file system, the on-disk format
- of ext3 is identical to ext2. It is possible to freely switch
- between using the ext3 driver and the ext2 driver, as long as the
- file system has been cleanly unmounted, or e2fsck is run on the file
- system.
-
- To add a journal on an existing ext2 file system or change the
- behavior of ext3 file systems, you can use the tune2fs utility ("man
- tune2fs"). To modify attributes of files and directories on ext3
- file systems, use chattr ("man chattr"). You need to be using
- e2fsprogs version 1.20 or later in order to create ext3 journals
- (available at <http://sourceforge.net/projects/e2fsprogs/>).
-
- To compile this file system support as a module, choose M here: the
- module will be called ext3.
-
-config EXT3_FS_XATTR
- bool "Ext3 extended attributes"
- depends on EXT3_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext3.
-
-config EXT3_FS_POSIX_ACL
- bool "Ext3 POSIX Access Control Lists"
- depends on EXT3_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT3_FS_SECURITY
- bool "Ext3 Security Labels"
- depends on EXT3_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext3 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT4_FS
- tristate "The Extended 4 (ext4) filesystem"
- select JBD2
- select CRC16
- help
- This is the next generation of the ext3 filesystem.
-
- Unlike the change from ext2 filesystem to ext3 filesystem,
- the on-disk format of ext4 is not forwards compatible with
- ext3; it is based on extent maps and it supports 48-bit
- physical block numbers. The ext4 filesystem also supports delayed
- allocation, persistent preallocation, high resolution time stamps,
- and a number of other features to improve performance and speed
- up fsck time. For more information, please see the web pages at
- http://ext4.wiki.kernel.org.
-
- The ext4 filesystem will support mounting an ext3
- filesystem; while there will be some performance gains from
- the delayed allocation and inode table readahead, the best
- performance gains will require enabling ext4 features in the
- filesystem, or formating a new filesystem as an ext4
- filesystem initially.
-
- To compile this file system support as a module, choose M here. The
- module will be called ext4.
-
- If unsure, say N.
-
-config EXT4DEV_COMPAT
- bool "Enable ext4dev compatibility"
- depends on EXT4_FS
- help
- Starting with 2.6.28, the name of the ext4 filesystem was
- renamed from ext4dev to ext4. Unfortunately there are some
- legacy userspace programs (such as klibc's fstype) have
- "ext4dev" hardcoded.
-
- To enable backwards compatibility so that systems that are
- still expecting to mount ext4 filesystems using ext4dev,
- chose Y here. This feature will go away by 2.6.31, so
- please arrange to get your userspace programs fixed!
-
-config EXT4_FS_XATTR
- bool "Ext4 extended attributes"
- depends on EXT4_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext4.
-
-config EXT4_FS_POSIX_ACL
- bool "Ext4 POSIX Access Control Lists"
- depends on EXT4_FS_XATTR
- select FS_POSIX_ACL
- help
- POSIX Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the POSIX ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT4_FS_SECURITY
- bool "Ext4 Security Labels"
- depends on EXT4_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext4 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JBD
- tristate
- help
- This is a generic journalling layer for block devices. It is
- currently used by the ext3 file system, but it could also be
- used to add journal support to other file systems or block
- devices such as RAID or LVM.
-
- If you are using the ext3 file system, you need to say Y here.
- If you are not using ext3 then you will probably want to say N.
-
- To compile this device as a module, choose M here: the module will be
- called jbd. If you are compiling ext3 into the kernel, you
- cannot compile this code as a module.
-
-config JBD_DEBUG
- bool "JBD (ext3) debugging support"
- depends on JBD && DEBUG_FS
- help
- If you are using the ext3 journaled file system (or potentially any
- other file system/device using JBD), this option allows you to
- enable debugging output while the system is running, in order to
- help track down any problems you are having. By default the
- debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a
- number between 1 and 5, the higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd/jbd-debug".
-
-config JBD2
- tristate
- select CRC32
- help
- This is a generic journaling layer for block devices that support
- both 32-bit and 64-bit block numbers. It is currently used by
- the ext4 and OCFS2 filesystems, but it could also be used to add
- journal support to other file systems or block devices such
- as RAID or LVM.
-
- If you are using ext4 or OCFS2, you need to say Y here.
- If you are not using ext4 or OCFS2 then you will
- probably want to say N.
-
- To compile this device as a module, choose M here. The module will be
- called jbd2. If you are compiling ext4 or OCFS2 into the kernel,
- you cannot compile this code as a module.
-
-config JBD2_DEBUG
- bool "JBD2 (ext4) debugging support"
- depends on JBD2 && DEBUG_FS
- help
- If you are using the ext4 journaled file system (or
- potentially any other filesystem/device using JBD2), this option
- allows you to enable debugging output while the system is running,
- in order to help track down any problems you are having.
- By default, the debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd2/jbd2-debug", where N is a
- number between 1 and 5. The higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd2/jbd2-debug".
+source "fs/jbd/Kconfig"
+source "fs/jbd2/Kconfig"
config FS_MBCACHE
# Meta block cache for Extended Attributes (ext2/ext3/ext4)
tristate
- depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
- default y if EXT2_FS=y || EXT3_FS=y || EXT4_FS=y
- default m if EXT2_FS=m || EXT3_FS=m || EXT4_FS=m
-
-config REISERFS_FS
- tristate "Reiserfs support"
- help
- Stores not just filenames but the files themselves in a balanced
- tree. Uses journalling.
-
- Balanced trees are more efficient than traditional file system
- architectural foundations.
-
- In general, ReiserFS is as fast as ext2, but is very efficient with
- large directories and small files. Additional patches are needed
- for NFS and quotas, please see <http://www.namesys.com/> for links.
-
- It is more easily extended to have features currently found in
- database and keyword search systems than block allocation based file
- systems are. The next version will be so extended, and will support
- plugins consistent with our motto ``It takes more than a license to
- make source code open.''
-
- Read <http://www.namesys.com/> to learn more about reiserfs.
-
- Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
- If you like it, you can pay us to add new features to it that you
- need, buy a support contract, or pay us to port it to another OS.
-
-config REISERFS_CHECK
- bool "Enable reiserfs debug mode"
- depends on REISERFS_FS
- help
- If you set this to Y, then ReiserFS will perform every check it can
- possibly imagine of its internal consistency throughout its
- operation. It will also go substantially slower. More than once we
- have forgotten that this was on, and then gone despondent over the
- latest benchmarks.:-) Use of this option allows our team to go all
- out in checking for consistency when debugging without fear of its
- effect on end users. If you are on the verge of sending in a bug
- report, say Y and you might get a useful error message. Almost
- everyone should say N.
-
-config REISERFS_PROC_INFO
- bool "Stats in /proc/fs/reiserfs"
- depends on REISERFS_FS && PROC_FS
- help
- Create under /proc/fs/reiserfs a hierarchy of files, displaying
- various ReiserFS statistics and internal data at the expense of
- making your kernel or module slightly larger (+8 KB). This also
- increases the amount of kernel memory required for each mount.
- Almost everyone but ReiserFS developers and people fine-tuning
- reiserfs or tracing problems should say N.
-
-config REISERFS_FS_XATTR
- bool "ReiserFS extended attributes"
- depends on REISERFS_FS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config REISERFS_FS_POSIX_ACL
- bool "ReiserFS POSIX Access Control Lists"
- depends on REISERFS_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
+ default y if EXT2_FS=y && EXT2_FS_XATTR
+ default y if EXT3_FS=y && EXT3_FS_XATTR
+ default y if EXT4_FS=y && EXT4_FS_XATTR
+ default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
-config REISERFS_FS_SECURITY
- bool "ReiserFS Security Labels"
- depends on REISERFS_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ReiserFS filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFS_FS
- tristate "JFS filesystem support"
- select NLS
- help
- This is a port of IBM's Journaled Filesystem . More information is
- available in the file <file:Documentation/filesystems/jfs.txt>.
-
- If you do not intend to use the JFS filesystem, say N.
-
-config JFS_POSIX_ACL
- bool "JFS POSIX Access Control Lists"
- depends on JFS_FS
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config JFS_SECURITY
- bool "JFS Security Labels"
- depends on JFS_FS
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the jfs filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFS_DEBUG
- bool "JFS debugging"
- depends on JFS_FS
- help
- If you are experiencing any problems with the JFS filesystem, say
- Y here. This will result in additional debugging messages to be
- written to the system log. Under normal circumstances, this
- results in very little overhead.
-
-config JFS_STATISTICS
- bool "JFS statistics"
- depends on JFS_FS
- help
- Enabling this option will cause statistics from the JFS file system
- to be made available to the user in the /proc/fs/jfs/ directory.
+source "fs/reiserfs/Kconfig"
+source "fs/jfs/Kconfig"
config FS_POSIX_ACL
# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
source "fs/xfs/Kconfig"
source "fs/gfs2/Kconfig"
-
-config OCFS2_FS
- tristate "OCFS2 file system support"
- depends on NET && SYSFS
- select CONFIGFS_FS
- select JBD2
- select CRC32
- help
- OCFS2 is a general purpose extent based shared disk cluster file
- system with many similarities to ext3. It supports 64 bit inode
- numbers, and has automatically extending metadata groups which may
- also make it attractive for non-clustered use.
-
- You'll want to install the ocfs2-tools package in order to at least
- get "mount.ocfs2".
-
- Project web page: http://oss.oracle.com/projects/ocfs2
- Tools web page: http://oss.oracle.com/projects/ocfs2-tools
- OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
-
- For more information on OCFS2, see the file
- <file:Documentation/filesystems/ocfs2.txt>.
-
-config OCFS2_FS_O2CB
- tristate "O2CB Kernelspace Clustering"
- depends on OCFS2_FS
- default y
- help
- OCFS2 includes a simple kernelspace clustering package, the OCFS2
- Cluster Base. It only requires a very small userspace component
- to configure it. This comes with the standard ocfs2-tools package.
- O2CB is limited to maintaining a cluster for OCFS2 file systems.
- It cannot manage any other cluster applications.
-
- It is always safe to say Y here, as the clustering method is
- run-time selectable.
-
-config OCFS2_FS_USERSPACE_CLUSTER
- tristate "OCFS2 Userspace Clustering"
- depends on OCFS2_FS && DLM
- default y
- help
- This option will allow OCFS2 to use userspace clustering services
- in conjunction with the DLM in fs/dlm. If you are using a
- userspace cluster manager, say Y here.
-
- It is safe to say Y, as the clustering method is run-time
- selectable.
-
-config OCFS2_FS_STATS
- bool "OCFS2 statistics"
- depends on OCFS2_FS
- default y
- help
- This option allows some fs statistics to be captured. Enabling
- this option may increase the memory consumption.
-
-config OCFS2_DEBUG_MASKLOG
- bool "OCFS2 logging support"
- depends on OCFS2_FS
- default y
- help
- The ocfs2 filesystem has an extensive logging system. The system
- allows selection of events to log via files in /sys/o2cb/logmask/.
- This option will enlarge your kernel, but it allows debugging of
- ocfs2 filesystem issues.
-
-config OCFS2_DEBUG_FS
- bool "OCFS2 expensive checks"
- depends on OCFS2_FS
- default n
- help
- This option will enable expensive consistency checks. Enable
- this option for debugging only as it is likely to decrease
- performance of the filesystem.
-
-config OCFS2_COMPAT_JBD
- bool "Use JBD for compatibility"
- depends on OCFS2_FS
- default n
- select JBD
- help
- The ocfs2 filesystem now uses JBD2 for its journalling. JBD2
- is backwards compatible with JBD. It is safe to say N here.
- However, if you really want to use the original JBD, say Y here.
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
endif # BLOCK
-config DNOTIFY
- bool "Dnotify support"
- default y
- help
- Dnotify is a directory-based per-fd file change notification system
- that uses signals to communicate events to user-space. There exist
- superior alternatives, but some applications may still rely on
- dnotify.
-
- If unsure, say Y.
-
-config INOTIFY
- bool "Inotify file change notification support"
- default y
- ---help---
- Say Y here to enable inotify support. Inotify is a file change
- notification system and a replacement for dnotify. Inotify fixes
- numerous shortcomings in dnotify and introduces several new features
- including multiple file events, one-shot support, and unmount
- notification.
-
- For more information, see <file:Documentation/filesystems/inotify.txt>
-
- If unsure, say Y.
-
-config INOTIFY_USER
- bool "Inotify support for userspace"
- depends on INOTIFY
- default y
- ---help---
- Say Y here to enable inotify support for userspace, including the
- associated system calls. Inotify allows monitoring of both files and
- directories via a single open fd. Events are read from the file
- descriptor, which is also select()- and poll()-able.
-
- For more information, see <file:Documentation/filesystems/inotify.txt>
-
- If unsure, say Y.
+source "fs/notify/Kconfig"
config QUOTA
bool "Quota support"
Note that this behavior is currently deprecated and may go away in
future. Please use notification via netlink socket instead.
+# Generic support for tree structured quota files. Seleted when needed.
+config QUOTA_TREE
+ tristate
+
config QFMT_V1
tristate "Old quota format support"
depends on QUOTA
config QFMT_V2
tristate "Quota format v2 support"
depends on QUOTA
+ select QUOTA_TREE
help
This quota format allows using quotas with 32-bit UIDs/GIDs. If you
need this functionality say Y here.
N here.
config FUSE_FS
- tristate "Filesystem in Userspace support"
+ tristate "FUSE (Filesystem in Userspace) support"
help
With FUSE it is possible to implement a fully functional filesystem
in a userspace program.
endmenu
-menu "Miscellaneous filesystems"
+menuconfig MISC_FILESYSTEMS
+ bool "Miscellaneous filesystems"
+ default y
+ ---help---
+ Say Y here to get to see options for various miscellaneous
+ filesystems, such as filesystems that came from other
+ operating systems.
+
+ This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and
+ disabled; if unsure, say Y here.
+
+if MISC_FILESYSTEMS
config ADFS_FS
tristate "ADFS file system support (EXPERIMENTAL)"
To compile the EFS file system support as a module, choose M here: the
module will be called efs.
-config JFFS2_FS
- tristate "Journalling Flash File System v2 (JFFS2) support"
- select CRC32
- depends on MTD
- help
- JFFS2 is the second generation of the Journalling Flash File System
- for use on diskless embedded devices. It provides improved wear
- levelling, compression and support for hard links. You cannot use
- this on normal block devices, only on 'MTD' devices.
-
- Further information on the design and implementation of JFFS2 is
- available at <http://sources.redhat.com/jffs2/>.
-
-config JFFS2_FS_DEBUG
- int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
- depends on JFFS2_FS
- default "0"
- help
- This controls the amount of debugging messages produced by the JFFS2
- code. Set it to zero for use in production systems. For evaluation,
- testing and debugging, it's advisable to set it to one. This will
- enable a few assertions and will print debugging messages at the
- KERN_DEBUG loglevel, where they won't normally be visible. Level 2
- is unlikely to be useful - it enables extra debugging in certain
- areas which at one point needed debugging, but when the bugs were
- located and fixed, the detailed messages were relegated to level 2.
-
- If reporting bugs, please try to have available a full dump of the
- messages at debug level 1 while the misbehaviour was occurring.
-
-config JFFS2_FS_WRITEBUFFER
- bool "JFFS2 write-buffering support"
- depends on JFFS2_FS
- default y
- help
- This enables the write-buffering support in JFFS2.
-
- This functionality is required to support JFFS2 on the following
- types of flash devices:
- - NAND flash
- - NOR flash with transparent ECC
- - DataFlash
-
-config JFFS2_FS_WBUF_VERIFY
- bool "Verify JFFS2 write-buffer reads"
- depends on JFFS2_FS_WRITEBUFFER
- default n
- help
- This causes JFFS2 to read back every page written through the
- write-buffer, and check for errors.
-
-config JFFS2_SUMMARY
- bool "JFFS2 summary support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- This feature makes it possible to use summary information
- for faster filesystem mount.
-
- The summary information can be inserted into a filesystem image
- by the utility 'sumtool'.
-
- If unsure, say 'N'.
-
-config JFFS2_FS_XATTR
- bool "JFFS2 XATTR support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config JFFS2_FS_POSIX_ACL
- bool "JFFS2 POSIX Access Control Lists"
- depends on JFFS2_FS_XATTR
- default y
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config JFFS2_FS_SECURITY
- bool "JFFS2 Security Labels"
- depends on JFFS2_FS_XATTR
- default y
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the jffs2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFFS2_COMPRESSION_OPTIONS
- bool "Advanced compression options for JFFS2"
- depends on JFFS2_FS
- default n
- help
- Enabling this option allows you to explicitly choose which
- compression modules, if any, are enabled in JFFS2. Removing
- compressors can mean you cannot read existing file systems,
- and enabling experimental compressors can mean that you
- write a file system which cannot be read by a standard kernel.
-
- If unsure, you should _definitely_ say 'N'.
-
-config JFFS2_ZLIB
- bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
- select ZLIB_INFLATE
- select ZLIB_DEFLATE
- depends on JFFS2_FS
- default y
- help
- Zlib is designed to be a free, general-purpose, legally unencumbered,
- lossless data-compression library for use on virtually any computer
- hardware and operating system. See <http://www.gzip.org/zlib/> for
- further information.
-
- Say 'Y' if unsure.
-
-config JFFS2_LZO
- bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
- select LZO_COMPRESS
- select LZO_DECOMPRESS
- depends on JFFS2_FS
- default n
- help
- minilzo-based compression. Generally works better than Zlib.
-
- This feature was added in July, 2007. Say 'N' if you need
- compatibility with older bootloaders or kernels.
-
-config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default y
- help
- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
-config JFFS2_RUBIN
- bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default n
- help
- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
-choice
- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
- default JFFS2_CMODE_PRIORITY
- depends on JFFS2_FS
- help
- You can set here the default compression mode of JFFS2 from
- the available compression modes. Don't touch if unsure.
-
-config JFFS2_CMODE_NONE
- bool "no compression"
- help
- Uses no compression.
-
-config JFFS2_CMODE_PRIORITY
- bool "priority"
- help
- Tries the compressors in a predefined order and chooses the first
- successful one.
-
-config JFFS2_CMODE_SIZE
- bool "size (EXPERIMENTAL)"
- help
- Tries all compressors and chooses the one which has the smallest
- result.
-
-config JFFS2_CMODE_FAVOURLZO
- bool "Favour LZO"
- help
- Tries all compressors and chooses the one which has the smallest
- result but gives some preference to LZO (which has faster
- decompression) at the expense of size.
-
-endchoice
-
+source "fs/jffs2/Kconfig"
# UBIFS File system configuration
source "fs/ubifs/Kconfig"
If unsure, say N.
+config SQUASHFS
+ tristate "SquashFS 4.0 - Squashed file system support"
+ depends on BLOCK
+ select ZLIB_INFLATE
+ help
+ Saying Y here includes support for SquashFS 4.0 (a Compressed
+ Read-Only File System). Squashfs is a highly compressed read-only
+ filesystem for Linux. It uses zlib compression to compress both
+ files, inodes and directories. Inodes in the system are very small
+ and all blocks are packed to minimise data overhead. Block sizes
+ greater than 4K are supported up to a maximum of 1 Mbytes (default
+ block size 128K). SquashFS 4.0 supports 64 bit filesystems and files
+ (larger than 4GB), full uid/gid information, hard links and
+ timestamps.
+
+ Squashfs is intended for general read-only filesystem use, for
+ archival use (i.e. in cases where a .tar.gz file may be used), and in
+ embedded systems where low overhead is needed. Further information
+ and tools are available from http://squashfs.sourceforge.net.
+
+ If you want to compile this as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called squashfs. Note that the root file system (the one
+ containing the directory /) cannot be compiled as a module.
+
+ If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+
+ bool "Additional option for memory-constrained systems"
+ depends on SQUASHFS
+ default n
+ help
+ Saying Y here allows you to specify cache size.
+
+ If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+ int "Number of fragments cached" if SQUASHFS_EMBEDDED
+ depends on SQUASHFS
+ default "3"
+ help
+ By default SquashFS caches the last 3 fragments read from
+ the filesystem. Increasing this amount may mean SquashFS
+ has to re-read fragments less often from disk, at the expense
+ of extra system memory. Decreasing this amount will mean
+ SquashFS uses less memory at the expense of extra reads from disk.
+
+ Note there must be at least one cached fragment. Anything
+ much more than three will probably not make much difference.
+
config VXFS_FS
tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
depends on BLOCK
Y here. This will result in _many_ additional debugging messages to be
written to the system log.
-endmenu
+endif # MISC_FILESYSTEMS
menuconfig NETWORK_FILESYSTEMS
bool "Network File Systems"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff