if BLOCK
-config EXT2_FS
- tristate "Second extended fs support"
- help
- Ext2 is a standard Linux file system for hard disks.
-
- To compile this file system support as a module, choose M here: the
- module will be called ext2.
-
- If unsure, say Y.
-
-config EXT2_FS_XATTR
- bool "Ext2 extended attributes"
- depends on EXT2_FS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config EXT2_FS_POSIX_ACL
- bool "Ext2 POSIX Access Control Lists"
- depends on EXT2_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT2_FS_SECURITY
- bool "Ext2 Security Labels"
- depends on EXT2_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT2_FS_XIP
- bool "Ext2 execute in place support"
- depends on EXT2_FS && MMU
- help
- Execute in place can be used on memory-backed block devices. If you
- enable this option, you can select to mount block devices which are
- capable of this feature without using the page cache.
-
- If you do not use a block device that is capable of using this,
- or if unsure, say N.
+source "fs/ext2/Kconfig"
+source "fs/ext3/Kconfig"
+source "fs/ext4/Kconfig"
config FS_XIP
# execute in place
depends on EXT2_FS_XIP
default y
-config EXT3_FS
- tristate "Ext3 journalling file system support"
- select JBD
- help
- This is the journalling version of the Second extended file system
- (often called ext3), the de facto standard Linux file system
- (method to organize files on a storage device) for hard disks.
-
- The journalling code included in this driver means you do not have
- to run e2fsck (file system checker) on your file systems after a
- crash. The journal keeps track of any changes that were being made
- at the time the system crashed, and can ensure that your file system
- is consistent without the need for a lengthy check.
-
- Other than adding the journal to the file system, the on-disk format
- of ext3 is identical to ext2. It is possible to freely switch
- between using the ext3 driver and the ext2 driver, as long as the
- file system has been cleanly unmounted, or e2fsck is run on the file
- system.
-
- To add a journal on an existing ext2 file system or change the
- behavior of ext3 file systems, you can use the tune2fs utility ("man
- tune2fs"). To modify attributes of files and directories on ext3
- file systems, use chattr ("man chattr"). You need to be using
- e2fsprogs version 1.20 or later in order to create ext3 journals
- (available at <http://sourceforge.net/projects/e2fsprogs/>).
-
- To compile this file system support as a module, choose M here: the
- module will be called ext3.
-
-config EXT3_FS_XATTR
- bool "Ext3 extended attributes"
- depends on EXT3_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext3.
-
-config EXT3_FS_POSIX_ACL
- bool "Ext3 POSIX Access Control Lists"
- depends on EXT3_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT3_FS_SECURITY
- bool "Ext3 Security Labels"
- depends on EXT3_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext3 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT4DEV_FS
- tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- select JBD2
- select CRC16
- help
- Ext4dev is a predecessor filesystem of the next generation
- extended fs ext4, based on ext3 filesystem code. It will be
- renamed ext4 fs later, once ext4dev is mature and stabilized.
-
- Unlike the change from ext2 filesystem to ext3 filesystem,
- the on-disk format of ext4dev is not the same as ext3 any more:
- it is based on extent maps and it supports 48-bit physical block
- numbers. These combined on-disk format changes will allow
- ext4dev/ext4 to handle more than 16 TB filesystem volumes --
- a hard limit that ext3 cannot overcome without changing the
- on-disk format.
-
- Other than extent maps and 48-bit block numbers, ext4dev also is
- likely to have other new features such as persistent preallocation,
- high resolution time stamps, and larger file support etc. These
- features will be added to ext4dev gradually.
-
- To compile this file system support as a module, choose M here. The
- module will be called ext4dev.
-
- If unsure, say N.
-
-config EXT4DEV_FS_XATTR
- bool "Ext4dev extended attributes"
- depends on EXT4DEV_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext4dev/ext4.
-
-config EXT4DEV_FS_POSIX_ACL
- bool "Ext4dev POSIX Access Control Lists"
- depends on EXT4DEV_FS_XATTR
- select FS_POSIX_ACL
- help
- POSIX Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the POSIX ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT4DEV_FS_SECURITY
- bool "Ext4dev Security Labels"
- depends on EXT4DEV_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext4dev/ext4 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JBD
- tristate
- help
- This is a generic journalling layer for block devices. It is
- currently used by the ext3 and OCFS2 file systems, but it could
- also be used to add journal support to other file systems or block
- devices such as RAID or LVM.
-
- If you are using the ext3 or OCFS2 file systems, you need to
- say Y here. If you are not using ext3 OCFS2 then you will probably
- want to say N.
-
- To compile this device as a module, choose M here: the module will be
- called jbd. If you are compiling ext3 or OCFS2 into the kernel,
- you cannot compile this code as a module.
-
-config JBD_DEBUG
- bool "JBD (ext3) debugging support"
- depends on JBD && DEBUG_FS
- help
- If you are using the ext3 journaled file system (or potentially any
- other file system/device using JBD), this option allows you to
- enable debugging output while the system is running, in order to
- help track down any problems you are having. By default the
- debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a
- number between 1 and 5, the higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd/jbd-debug".
-
-config JBD2
- tristate
- select CRC32
- help
- This is a generic journaling layer for block devices that support
- both 32-bit and 64-bit block numbers. It is currently used by
- the ext4dev/ext4 filesystem, but it could also be used to add
- journal support to other file systems or block devices such
- as RAID or LVM.
-
- If you are using ext4dev/ext4, you need to say Y here. If you are not
- using ext4dev/ext4 then you will probably want to say N.
-
- To compile this device as a module, choose M here. The module will be
- called jbd2. If you are compiling ext4dev/ext4 into the kernel,
- you cannot compile this code as a module.
-
-config JBD2_DEBUG
- bool "JBD2 (ext4dev/ext4) debugging support"
- depends on JBD2 && DEBUG_FS
- help
- If you are using the ext4dev/ext4 journaled file system (or
- potentially any other filesystem/device using JBD2), this option
- allows you to enable debugging output while the system is running,
- in order to help track down any problems you are having.
- By default, the debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd2/jbd2-debug", where N is a
- number between 1 and 5. The higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd2/jbd2-debug".
+source "fs/jbd/Kconfig"
+source "fs/jbd2/Kconfig"
config FS_MBCACHE
# Meta block cache for Extended Attributes (ext2/ext3/ext4)
tristate
- depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
- default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
- default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
+ default y if EXT2_FS=y && EXT2_FS_XATTR
+ default y if EXT3_FS=y && EXT3_FS_XATTR
+ default y if EXT4_FS=y && EXT4_FS_XATTR
+ default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
config REISERFS_FS
tristate "Reiserfs support"
bool
default n
+config FILE_LOCKING
+ bool "Enable POSIX file locking API" if EMBEDDED
+ default y
+ help
+ This option enables standard file locking support, required
+ for filesystems like NFS and for the flock() system
+ call. Disabling this option saves about 11k.
+
source "fs/xfs/Kconfig"
source "fs/gfs2/Kconfig"
tristate "OCFS2 file system support"
depends on NET && SYSFS
select CONFIGFS_FS
- select JBD
+ select JBD2
select CRC32
+ select QUOTA
+ select QUOTA_TREE
help
OCFS2 is a general purpose extent based shared disk cluster file
system with many similarities to ext3. It supports 64 bit inode
this option for debugging only as it is likely to decrease
performance of the filesystem.
-endif # BLOCK
-
-config DNOTIFY
- bool "Dnotify support"
- default y
+config OCFS2_FS_POSIX_ACL
+ bool "OCFS2 POSIX Access Control Lists"
+ depends on OCFS2_FS
+ select FS_POSIX_ACL
+ default n
help
- Dnotify is a directory-based per-fd file change notification system
- that uses signals to communicate events to user-space. There exist
- superior alternatives, but some applications may still rely on
- dnotify.
-
- If unsure, say Y.
+ Posix Access Control Lists (ACLs) support permissions for users and
+ groups beyond the owner/group/world scheme.
-config INOTIFY
- bool "Inotify file change notification support"
- default y
- ---help---
- Say Y here to enable inotify support. Inotify is a file change
- notification system and a replacement for dnotify. Inotify fixes
- numerous shortcomings in dnotify and introduces several new features
- including multiple file events, one-shot support, and unmount
- notification.
+config BTRFS_FS
+ tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format"
+ depends on EXPERIMENTAL
+ select LIBCRC32C
+ select ZLIB_INFLATE
+ select ZLIB_DEFLATE
+ help
+ Btrfs is a new filesystem with extents, writable snapshotting,
+ support for multiple devices and many more features.
- For more information, see <file:Documentation/filesystems/inotify.txt>
+ Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET
+ FINALIZED. You should say N here unless you are interested in
+ testing Btrfs with non-critical data.
- If unsure, say Y.
+ To compile this file system support as a module, choose M here. The
+ module will be called btrfs.
-config INOTIFY_USER
- bool "Inotify support for userspace"
- depends on INOTIFY
- default y
- ---help---
- Say Y here to enable inotify support for userspace, including the
- associated system calls. Inotify allows monitoring of both files and
- directories via a single open fd. Events are read from the file
- descriptor, which is also select()- and poll()-able.
+ If unsure, say N.
- For more information, see <file:Documentation/filesystems/inotify.txt>
+endif # BLOCK
- If unsure, say Y.
+source "fs/notify/Kconfig"
config QUOTA
bool "Quota support"
Note that this behavior is currently deprecated and may go away in
future. Please use notification via netlink socket instead.
+# Generic support for tree structured quota files. Seleted when needed.
+config QUOTA_TREE
+ tristate
+
config QFMT_V1
tristate "Old quota format support"
depends on QUOTA
config QFMT_V2
tristate "Quota format v2 support"
depends on QUOTA
+ select QUOTA_TREE
help
This quota format allows using quotas with 32-bit UIDs/GIDs. If you
need this functionality say Y here.
N here.
config FUSE_FS
- tristate "Filesystem in Userspace support"
+ tristate "FUSE (Filesystem in Userspace) support"
help
With FUSE it is possible to implement a fully functional filesystem
in a userspace program.
endmenu
-menu "Miscellaneous filesystems"
+menuconfig MISC_FILESYSTEMS
+ bool "Miscellaneous filesystems"
+ default y
+ ---help---
+ Say Y here to get to see options for various miscellaneous
+ filesystems, such as filesystems that came from other
+ operating systems.
+
+ This option alone does not add any kernel code.
+
+ If you say N, all options in this submenu will be skipped and
+ disabled; if unsure, say Y here.
+
+if MISC_FILESYSTEMS
config ADFS_FS
tristate "ADFS file system support (EXPERIMENTAL)"
To compile the EFS file system support as a module, choose M here: the
module will be called efs.
-config JFFS2_FS
- tristate "Journalling Flash File System v2 (JFFS2) support"
- select CRC32
- depends on MTD
- help
- JFFS2 is the second generation of the Journalling Flash File System
- for use on diskless embedded devices. It provides improved wear
- levelling, compression and support for hard links. You cannot use
- this on normal block devices, only on 'MTD' devices.
-
- Further information on the design and implementation of JFFS2 is
- available at <http://sources.redhat.com/jffs2/>.
-
-config JFFS2_FS_DEBUG
- int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
- depends on JFFS2_FS
- default "0"
- help
- This controls the amount of debugging messages produced by the JFFS2
- code. Set it to zero for use in production systems. For evaluation,
- testing and debugging, it's advisable to set it to one. This will
- enable a few assertions and will print debugging messages at the
- KERN_DEBUG loglevel, where they won't normally be visible. Level 2
- is unlikely to be useful - it enables extra debugging in certain
- areas which at one point needed debugging, but when the bugs were
- located and fixed, the detailed messages were relegated to level 2.
-
- If reporting bugs, please try to have available a full dump of the
- messages at debug level 1 while the misbehaviour was occurring.
-
-config JFFS2_FS_WRITEBUFFER
- bool "JFFS2 write-buffering support"
- depends on JFFS2_FS
- default y
- help
- This enables the write-buffering support in JFFS2.
-
- This functionality is required to support JFFS2 on the following
- types of flash devices:
- - NAND flash
- - NOR flash with transparent ECC
- - DataFlash
-
-config JFFS2_FS_WBUF_VERIFY
- bool "Verify JFFS2 write-buffer reads"
- depends on JFFS2_FS_WRITEBUFFER
- default n
- help
- This causes JFFS2 to read back every page written through the
- write-buffer, and check for errors.
-
-config JFFS2_SUMMARY
- bool "JFFS2 summary support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- This feature makes it possible to use summary information
- for faster filesystem mount.
-
- The summary information can be inserted into a filesystem image
- by the utility 'sumtool'.
-
- If unsure, say 'N'.
-
-config JFFS2_FS_XATTR
- bool "JFFS2 XATTR support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config JFFS2_FS_POSIX_ACL
- bool "JFFS2 POSIX Access Control Lists"
- depends on JFFS2_FS_XATTR
- default y
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config JFFS2_FS_SECURITY
- bool "JFFS2 Security Labels"
- depends on JFFS2_FS_XATTR
- default y
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the jffs2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFFS2_COMPRESSION_OPTIONS
- bool "Advanced compression options for JFFS2"
- depends on JFFS2_FS
- default n
- help
- Enabling this option allows you to explicitly choose which
- compression modules, if any, are enabled in JFFS2. Removing
- compressors can mean you cannot read existing file systems,
- and enabling experimental compressors can mean that you
- write a file system which cannot be read by a standard kernel.
-
- If unsure, you should _definitely_ say 'N'.
-
-config JFFS2_ZLIB
- bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
- select ZLIB_INFLATE
- select ZLIB_DEFLATE
- depends on JFFS2_FS
- default y
- help
- Zlib is designed to be a free, general-purpose, legally unencumbered,
- lossless data-compression library for use on virtually any computer
- hardware and operating system. See <http://www.gzip.org/zlib/> for
- further information.
-
- Say 'Y' if unsure.
-
-config JFFS2_LZO
- bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
- select LZO_COMPRESS
- select LZO_DECOMPRESS
- depends on JFFS2_FS
- default n
- help
- minilzo-based compression. Generally works better than Zlib.
-
- This feature was added in July, 2007. Say 'N' if you need
- compatibility with older bootloaders or kernels.
-
-config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default y
- help
- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
-config JFFS2_RUBIN
- bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default n
- help
- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
-choice
- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
- default JFFS2_CMODE_PRIORITY
- depends on JFFS2_FS
- help
- You can set here the default compression mode of JFFS2 from
- the available compression modes. Don't touch if unsure.
-
-config JFFS2_CMODE_NONE
- bool "no compression"
- help
- Uses no compression.
-
-config JFFS2_CMODE_PRIORITY
- bool "priority"
- help
- Tries the compressors in a predefined order and chooses the first
- successful one.
-
-config JFFS2_CMODE_SIZE
- bool "size (EXPERIMENTAL)"
- help
- Tries all compressors and chooses the one which has the smallest
- result.
-
-config JFFS2_CMODE_FAVOURLZO
- bool "Favour LZO"
- help
- Tries all compressors and chooses the one which has the smallest
- result but gives some preference to LZO (which has faster
- decompression) at the expense of size.
-
-endchoice
-
+source "fs/jffs2/Kconfig"
# UBIFS File system configuration
source "fs/ubifs/Kconfig"
If unsure, say N.
+config SQUASHFS
+ tristate "SquashFS 4.0 - Squashed file system support"
+ depends on BLOCK
+ select ZLIB_INFLATE
+ help
+ Saying Y here includes support for SquashFS 4.0 (a Compressed
+ Read-Only File System). Squashfs is a highly compressed read-only
+ filesystem for Linux. It uses zlib compression to compress both
+ files, inodes and directories. Inodes in the system are very small
+ and all blocks are packed to minimise data overhead. Block sizes
+ greater than 4K are supported up to a maximum of 1 Mbytes (default
+ block size 128K). SquashFS 4.0 supports 64 bit filesystems and files
+ (larger than 4GB), full uid/gid information, hard links and
+ timestamps.
+
+ Squashfs is intended for general read-only filesystem use, for
+ archival use (i.e. in cases where a .tar.gz file may be used), and in
+ embedded systems where low overhead is needed. Further information
+ and tools are available from http://squashfs.sourceforge.net.
+
+ If you want to compile this as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called squashfs. Note that the root file system (the one
+ containing the directory /) cannot be compiled as a module.
+
+ If unsure, say N.
+
+config SQUASHFS_EMBEDDED
+
+ bool "Additional option for memory-constrained systems"
+ depends on SQUASHFS
+ default n
+ help
+ Saying Y here allows you to specify cache size.
+
+ If unsure, say N.
+
+config SQUASHFS_FRAGMENT_CACHE_SIZE
+ int "Number of fragments cached" if SQUASHFS_EMBEDDED
+ depends on SQUASHFS
+ default "3"
+ help
+ By default SquashFS caches the last 3 fragments read from
+ the filesystem. Increasing this amount may mean SquashFS
+ has to re-read fragments less often from disk, at the expense
+ of extra system memory. Decreasing this amount will mean
+ SquashFS uses less memory at the expense of extra reads from disk.
+
+ Note there must be at least one cached fragment. Anything
+ much more than three will probably not make much difference.
+
config VXFS_FS
tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
depends on BLOCK
Y here. This will result in _many_ additional debugging messages to be
written to the system log.
-endmenu
+endif # MISC_FILESYSTEMS
menuconfig NETWORK_FILESYSTEMS
bool "Network File Systems"
If unsure, say N.
+config SUNRPC_REGISTER_V4
+ bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)"
+ depends on SUNRPC && EXPERIMENTAL
+ default n
+ help
+ Sun added support for registering RPC services at an IPv6
+ address by creating two new versions of the rpcbind protocol
+ (RFC 1833).
+
+ This option enables support in the kernel RPC server for
+ registering kernel RPC services via version 4 of the rpcbind
+ protocol. If you enable this option, you must run a portmapper
+ daemon that supports rpcbind protocol version 4.
+
+ Serving NFS over IPv6 from knfsd (the kernel's NFS server)
+ requires that you enable this option and use a portmapper that
+ supports rpcbind version 4.
+
+ If unsure, say N to get traditional behavior (register kernel
+ RPC services using only rpcbind version 2). Distributions
+ using the legacy Linux portmapper daemon must say N here.
+
config RPCSEC_GSS_KRB5
tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
depends on SUNRPC && EXPERIMENTAL
smbmount from samba 2.2.0 or later supports this.
-config CIFS
- tristate "CIFS support (advanced network filesystem, SMBFS successor)"
- depends on INET
- select NLS
- help
- This is the client VFS module for the Common Internet File System
- (CIFS) protocol which is the successor to the Server Message Block
- (SMB) protocol, the native file sharing mechanism for most early
- PC operating systems. The CIFS protocol is fully supported by
- file servers such as Windows 2000 (including Windows 2003, NT 4
- and Windows XP) as well by Samba (which provides excellent CIFS
- server support for Linux and many other operating systems). Limited
- support for OS/2 and Windows ME and similar servers is provided as
- well.
-
- The cifs module provides an advanced network file system
- client for mounting to CIFS compliant servers. It includes
- support for DFS (hierarchical name space), secure per-user
- session establishment via Kerberos or NTLM or NTLMv2,
- safe distributed caching (oplock), optional packet
- signing, Unicode and other internationalization improvements.
- If you need to mount to Samba or Windows from this machine, say Y.
-
-config CIFS_STATS
- bool "CIFS statistics"
- depends on CIFS
- help
- Enabling this option will cause statistics for each server share
- mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
-
-config CIFS_STATS2
- bool "Extended statistics"
- depends on CIFS_STATS
- help
- Enabling this option will allow more detailed statistics on SMB
- request timing to be displayed in /proc/fs/cifs/DebugData and also
- allow optional logging of slow responses to dmesg (depending on the
- value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
- These additional statistics may have a minor effect on performance
- and memory utilization.
-
- Unless you are a developer or are doing network performance analysis
- or tuning, say N.
-
-config CIFS_WEAK_PW_HASH
- bool "Support legacy servers which use weaker LANMAN security"
- depends on CIFS
- help
- Modern CIFS servers including Samba and most Windows versions
- (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
- security mechanisms. These hash the password more securely
- than the mechanisms used in the older LANMAN version of the
- SMB protocol but LANMAN based authentication is needed to
- establish sessions with some old SMB servers.
-
- Enabling this option allows the cifs module to mount to older
- LANMAN based servers such as OS/2 and Windows 95, but such
- mounts may be less secure than mounts using NTLM or more recent
- security mechanisms if you are on a public network. Unless you
- have a need to access old SMB servers (and are on a private
- network) you probably want to say N. Even if this support
- is enabled in the kernel build, LANMAN authentication will not be
- used automatically. At runtime LANMAN mounts are disabled but
- can be set to required (or optional) either in
- /proc/fs/cifs (see fs/cifs/README for more detail) or via an
- option on the mount command. This support is disabled by
- default in order to reduce the possibility of a downgrade
- attack.
-
- If unsure, say N.
-
-config CIFS_XATTR
- bool "CIFS extended attributes"
- depends on CIFS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details). CIFS maps the name of
- extended attributes beginning with the user namespace prefix
- to SMB/CIFS EAs. EAs are stored on Windows servers without the
- user namespace prefix, but their names are seen by Linux cifs clients
- prefaced by the user namespace prefix. The system namespace
- (used by some filesystems to store ACLs) is not supported at
- this time.
-
- If unsure, say N.
-
-config CIFS_POSIX
- bool "CIFS POSIX Extensions"
- depends on CIFS_XATTR
- help
- Enabling this option will cause the cifs client to attempt to
- negotiate a newer dialect with servers, such as Samba 3.0.5
- or later, that optionally can handle more POSIX like (rather
- than Windows like) file behavior. It also enables
- support for POSIX ACLs (getfacl and setfacl) to servers
- (such as Samba 3.10 and later) which can negotiate
- CIFS POSIX ACL support. If unsure, say N.
-
-config CIFS_DEBUG2
- bool "Enable additional CIFS debugging routines"
- depends on CIFS
- help
- Enabling this option adds a few more debugging routines
- to the cifs code which slightly increases the size of
- the cifs module and can cause additional logging of debug
- messages in some error paths, slowing performance. This
- option can be turned off unless you are debugging
- cifs problems. If unsure, say N.
-
-config CIFS_EXPERIMENTAL
- bool "CIFS Experimental Features (EXPERIMENTAL)"
- depends on CIFS && EXPERIMENTAL
- help
- Enables cifs features under testing. These features are
- experimental and currently include DFS support and directory
- change notification ie fcntl(F_DNOTIFY), as well as the upcall
- mechanism which will be used for Kerberos session negotiation
- and uid remapping. Some of these features also may depend on
- setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
- (which is disabled by default). See the file fs/cifs/README
- for more details. If unsure, say N.
-
-config CIFS_UPCALL
- bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
- depends on CIFS && KEYS
- help
- Enables an upcall mechanism for CIFS which accesses
- userspace helper utilities to provide SPNEGO packaged (RFC 4178)
- Kerberos tickets which are needed to mount to certain secure servers
- (for which more secure Kerberos authentication is required). If
- unsure, say N.
-
-config CIFS_DFS_UPCALL
- bool "DFS feature support (EXPERIMENTAL)"
- depends on CIFS_EXPERIMENTAL
- depends on KEYS
- help
- Enables an upcall mechanism for CIFS which contacts userspace
- helper utilities to provide server name resolution (host names to
- IP addresses) which is needed for implicit mounts of DFS junction
- points. If unsure, say N.
+source "fs/cifs/Kconfig"
config NCP_FS
tristate "NCP file system support (to mount NetWare volumes)"