if BLOCK
-config EXT2_FS
- tristate "Second extended fs support"
- help
- Ext2 is a standard Linux file system for hard disks.
-
- To compile this file system support as a module, choose M here: the
- module will be called ext2.
-
- If unsure, say Y.
-
-config EXT2_FS_XATTR
- bool "Ext2 extended attributes"
- depends on EXT2_FS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config EXT2_FS_POSIX_ACL
- bool "Ext2 POSIX Access Control Lists"
- depends on EXT2_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT2_FS_SECURITY
- bool "Ext2 Security Labels"
- depends on EXT2_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT2_FS_XIP
- bool "Ext2 execute in place support"
- depends on EXT2_FS && MMU
- help
- Execute in place can be used on memory-backed block devices. If you
- enable this option, you can select to mount block devices which are
- capable of this feature without using the page cache.
-
- If you do not use a block device that is capable of using this,
- or if unsure, say N.
+source "fs/ext2/Kconfig"
+source "fs/ext3/Kconfig"
+source "fs/ext4/Kconfig"
config FS_XIP
# execute in place
depends on EXT2_FS_XIP
default y
-config EXT3_FS
- tristate "Ext3 journalling file system support"
- select JBD
- help
- This is the journalling version of the Second extended file system
- (often called ext3), the de facto standard Linux file system
- (method to organize files on a storage device) for hard disks.
-
- The journalling code included in this driver means you do not have
- to run e2fsck (file system checker) on your file systems after a
- crash. The journal keeps track of any changes that were being made
- at the time the system crashed, and can ensure that your file system
- is consistent without the need for a lengthy check.
-
- Other than adding the journal to the file system, the on-disk format
- of ext3 is identical to ext2. It is possible to freely switch
- between using the ext3 driver and the ext2 driver, as long as the
- file system has been cleanly unmounted, or e2fsck is run on the file
- system.
-
- To add a journal on an existing ext2 file system or change the
- behavior of ext3 file systems, you can use the tune2fs utility ("man
- tune2fs"). To modify attributes of files and directories on ext3
- file systems, use chattr ("man chattr"). You need to be using
- e2fsprogs version 1.20 or later in order to create ext3 journals
- (available at <http://sourceforge.net/projects/e2fsprogs/>).
-
- To compile this file system support as a module, choose M here: the
- module will be called ext3.
-
-config EXT3_FS_XATTR
- bool "Ext3 extended attributes"
- depends on EXT3_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext3.
-
-config EXT3_FS_POSIX_ACL
- bool "Ext3 POSIX Access Control Lists"
- depends on EXT3_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT3_FS_SECURITY
- bool "Ext3 Security Labels"
- depends on EXT3_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext3 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config EXT4_FS
- tristate "The Extended 4 (ext4) filesystem"
- select JBD2
- select CRC16
- help
- This is the next generation of the ext3 filesystem.
-
- Unlike the change from ext2 filesystem to ext3 filesystem,
- the on-disk format of ext4 is not forwards compatible with
- ext3; it is based on extent maps and it supports 48-bit
- physical block numbers. The ext4 filesystem also supports delayed
- allocation, persistent preallocation, high resolution time stamps,
- and a number of other features to improve performance and speed
- up fsck time. For more information, please see the web pages at
- http://ext4.wiki.kernel.org.
-
- The ext4 filesystem will support mounting an ext3
- filesystem; while there will be some performance gains from
- the delayed allocation and inode table readahead, the best
- performance gains will require enabling ext4 features in the
- filesystem, or formating a new filesystem as an ext4
- filesystem initially.
-
- To compile this file system support as a module, choose M here. The
- module will be called ext4dev.
-
- If unsure, say N.
-
-config EXT4DEV_COMPAT
- bool "Enable ext4dev compatibility"
- depends on EXT4_FS
- help
- Starting with 2.6.28, the name of the ext4 filesystem was
- renamed from ext4dev to ext4. Unfortunately there are some
- lagecy userspace programs (such as klibc's fstype) have
- "ext4dev" hardcoded.
-
- To enable backwards compatibility so that systems that are
- still expecting to mount ext4 filesystems using ext4dev,
- chose Y here. This feature will go away by 2.6.31, so
- please arrange to get your userspace programs fixed!
-
-config EXT4_FS_XATTR
- bool "Ext4 extended attributes"
- depends on EXT4_FS
- default y
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
- You need this for POSIX ACL support on ext4.
-
-config EXT4_FS_POSIX_ACL
- bool "Ext4 POSIX Access Control Lists"
- depends on EXT4_FS_XATTR
- select FS_POSIX_ACL
- help
- POSIX Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the POSIX ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config EXT4_FS_SECURITY
- bool "Ext4 Security Labels"
- depends on EXT4_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ext4 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JBD
- tristate
- help
- This is a generic journalling layer for block devices. It is
- currently used by the ext3 and OCFS2 file systems, but it could
- also be used to add journal support to other file systems or block
- devices such as RAID or LVM.
-
- If you are using the ext3 or OCFS2 file systems, you need to
- say Y here. If you are not using ext3 OCFS2 then you will probably
- want to say N.
-
- To compile this device as a module, choose M here: the module will be
- called jbd. If you are compiling ext3 or OCFS2 into the kernel,
- you cannot compile this code as a module.
-
-config JBD_DEBUG
- bool "JBD (ext3) debugging support"
- depends on JBD && DEBUG_FS
- help
- If you are using the ext3 journaled file system (or potentially any
- other file system/device using JBD), this option allows you to
- enable debugging output while the system is running, in order to
- help track down any problems you are having. By default the
- debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd/jbd-debug", where N is a
- number between 1 and 5, the higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd/jbd-debug".
-
-config JBD2
- tristate
- select CRC32
- help
- This is a generic journaling layer for block devices that support
- both 32-bit and 64-bit block numbers. It is currently used by
- the ext4 filesystem, but it could also be used to add
- journal support to other file systems or block devices such
- as RAID or LVM.
-
- If you are using ext4, you need to say Y here. If you are not
- using ext4 then you will probably want to say N.
-
- To compile this device as a module, choose M here. The module will be
- called jbd2. If you are compiling ext4 into the kernel,
- you cannot compile this code as a module.
-
-config JBD2_DEBUG
- bool "JBD2 (ext4) debugging support"
- depends on JBD2 && DEBUG_FS
- help
- If you are using the ext4 journaled file system (or
- potentially any other filesystem/device using JBD2), this option
- allows you to enable debugging output while the system is running,
- in order to help track down any problems you are having.
- By default, the debugging output will be turned off.
-
- If you select Y here, then you will be able to turn on debugging
- with "echo N > /sys/kernel/debug/jbd2/jbd2-debug", where N is a
- number between 1 and 5. The higher the number, the more debugging
- output is generated. To turn debugging off again, do
- "echo 0 > /sys/kernel/debug/jbd2/jbd2-debug".
+source "fs/jbd/Kconfig"
+source "fs/jbd2/Kconfig"
config FS_MBCACHE
# Meta block cache for Extended Attributes (ext2/ext3/ext4)
tristate
- depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
- default y if EXT2_FS=y || EXT3_FS=y || EXT4_FS=y
- default m if EXT2_FS=m || EXT3_FS=m || EXT4_FS=m
-
-config REISERFS_FS
- tristate "Reiserfs support"
- help
- Stores not just filenames but the files themselves in a balanced
- tree. Uses journalling.
-
- Balanced trees are more efficient than traditional file system
- architectural foundations.
-
- In general, ReiserFS is as fast as ext2, but is very efficient with
- large directories and small files. Additional patches are needed
- for NFS and quotas, please see <http://www.namesys.com/> for links.
-
- It is more easily extended to have features currently found in
- database and keyword search systems than block allocation based file
- systems are. The next version will be so extended, and will support
- plugins consistent with our motto ``It takes more than a license to
- make source code open.''
-
- Read <http://www.namesys.com/> to learn more about reiserfs.
-
- Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com.
-
- If you like it, you can pay us to add new features to it that you
- need, buy a support contract, or pay us to port it to another OS.
-
-config REISERFS_CHECK
- bool "Enable reiserfs debug mode"
- depends on REISERFS_FS
- help
- If you set this to Y, then ReiserFS will perform every check it can
- possibly imagine of its internal consistency throughout its
- operation. It will also go substantially slower. More than once we
- have forgotten that this was on, and then gone despondent over the
- latest benchmarks.:-) Use of this option allows our team to go all
- out in checking for consistency when debugging without fear of its
- effect on end users. If you are on the verge of sending in a bug
- report, say Y and you might get a useful error message. Almost
- everyone should say N.
-
-config REISERFS_PROC_INFO
- bool "Stats in /proc/fs/reiserfs"
- depends on REISERFS_FS && PROC_FS
- help
- Create under /proc/fs/reiserfs a hierarchy of files, displaying
- various ReiserFS statistics and internal data at the expense of
- making your kernel or module slightly larger (+8 KB). This also
- increases the amount of kernel memory required for each mount.
- Almost everyone but ReiserFS developers and people fine-tuning
- reiserfs or tracing problems should say N.
-
-config REISERFS_FS_XATTR
- bool "ReiserFS extended attributes"
- depends on REISERFS_FS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config REISERFS_FS_POSIX_ACL
- bool "ReiserFS POSIX Access Control Lists"
- depends on REISERFS_FS_XATTR
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config REISERFS_FS_SECURITY
- bool "ReiserFS Security Labels"
- depends on REISERFS_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the ReiserFS filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFS_FS
- tristate "JFS filesystem support"
- select NLS
- help
- This is a port of IBM's Journaled Filesystem . More information is
- available in the file <file:Documentation/filesystems/jfs.txt>.
-
- If you do not intend to use the JFS filesystem, say N.
-
-config JFS_POSIX_ACL
- bool "JFS POSIX Access Control Lists"
- depends on JFS_FS
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
+ default y if EXT2_FS=y && EXT2_FS_XATTR
+ default y if EXT3_FS=y && EXT3_FS_XATTR
+ default y if EXT4_FS=y && EXT4_FS_XATTR
+ default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
- If you don't know what Access Control Lists are, say N
-
-config JFS_SECURITY
- bool "JFS Security Labels"
- depends on JFS_FS
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the jfs filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFS_DEBUG
- bool "JFS debugging"
- depends on JFS_FS
- help
- If you are experiencing any problems with the JFS filesystem, say
- Y here. This will result in additional debugging messages to be
- written to the system log. Under normal circumstances, this
- results in very little overhead.
-
-config JFS_STATISTICS
- bool "JFS statistics"
- depends on JFS_FS
- help
- Enabling this option will cause statistics from the JFS file system
- to be made available to the user in the /proc/fs/jfs/ directory.
+source "fs/reiserfs/Kconfig"
+source "fs/jfs/Kconfig"
config FS_POSIX_ACL
# Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4)
source "fs/xfs/Kconfig"
source "fs/gfs2/Kconfig"
-
-config OCFS2_FS
- tristate "OCFS2 file system support"
- depends on NET && SYSFS
- select CONFIGFS_FS
- select JBD
- select CRC32
- help
- OCFS2 is a general purpose extent based shared disk cluster file
- system with many similarities to ext3. It supports 64 bit inode
- numbers, and has automatically extending metadata groups which may
- also make it attractive for non-clustered use.
-
- You'll want to install the ocfs2-tools package in order to at least
- get "mount.ocfs2".
-
- Project web page: http://oss.oracle.com/projects/ocfs2
- Tools web page: http://oss.oracle.com/projects/ocfs2-tools
- OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/
-
- For more information on OCFS2, see the file
- <file:Documentation/filesystems/ocfs2.txt>.
-
-config OCFS2_FS_O2CB
- tristate "O2CB Kernelspace Clustering"
- depends on OCFS2_FS
- default y
- help
- OCFS2 includes a simple kernelspace clustering package, the OCFS2
- Cluster Base. It only requires a very small userspace component
- to configure it. This comes with the standard ocfs2-tools package.
- O2CB is limited to maintaining a cluster for OCFS2 file systems.
- It cannot manage any other cluster applications.
-
- It is always safe to say Y here, as the clustering method is
- run-time selectable.
-
-config OCFS2_FS_USERSPACE_CLUSTER
- tristate "OCFS2 Userspace Clustering"
- depends on OCFS2_FS && DLM
- default y
- help
- This option will allow OCFS2 to use userspace clustering services
- in conjunction with the DLM in fs/dlm. If you are using a
- userspace cluster manager, say Y here.
-
- It is safe to say Y, as the clustering method is run-time
- selectable.
-
-config OCFS2_FS_STATS
- bool "OCFS2 statistics"
- depends on OCFS2_FS
- default y
- help
- This option allows some fs statistics to be captured. Enabling
- this option may increase the memory consumption.
-
-config OCFS2_DEBUG_MASKLOG
- bool "OCFS2 logging support"
- depends on OCFS2_FS
- default y
- help
- The ocfs2 filesystem has an extensive logging system. The system
- allows selection of events to log via files in /sys/o2cb/logmask/.
- This option will enlarge your kernel, but it allows debugging of
- ocfs2 filesystem issues.
-
-config OCFS2_DEBUG_FS
- bool "OCFS2 expensive checks"
- depends on OCFS2_FS
- default n
- help
- This option will enable expensive consistency checks. Enable
- this option for debugging only as it is likely to decrease
- performance of the filesystem.
+source "fs/ocfs2/Kconfig"
+source "fs/btrfs/Kconfig"
+source "fs/nilfs2/Kconfig"
endif # BLOCK
-config DNOTIFY
- bool "Dnotify support"
- default y
- help
- Dnotify is a directory-based per-fd file change notification system
- that uses signals to communicate events to user-space. There exist
- superior alternatives, but some applications may still rely on
- dnotify.
-
- If unsure, say Y.
-
-config INOTIFY
- bool "Inotify file change notification support"
- default y
- ---help---
- Say Y here to enable inotify support. Inotify is a file change
- notification system and a replacement for dnotify. Inotify fixes
- numerous shortcomings in dnotify and introduces several new features
- including multiple file events, one-shot support, and unmount
- notification.
-
- For more information, see <file:Documentation/filesystems/inotify.txt>
-
- If unsure, say Y.
-
-config INOTIFY_USER
- bool "Inotify support for userspace"
- depends on INOTIFY
- default y
- ---help---
- Say Y here to enable inotify support for userspace, including the
- associated system calls. Inotify allows monitoring of both files and
- directories via a single open fd. Events are read from the file
- descriptor, which is also select()- and poll()-able.
-
- For more information, see <file:Documentation/filesystems/inotify.txt>
-
- If unsure, say Y.
-
-config QUOTA
- bool "Quota support"
- help
- If you say Y here, you will be able to set per user limits for disk
- usage (also called disk quotas). Currently, it works for the
- ext2, ext3, and reiserfs file system. ext3 also supports journalled
- quotas for which you don't need to run quotacheck(8) after an unclean
- shutdown.
- For further details, read the Quota mini-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, or the documentation provided
- with the quota tools. Probably the quota support is only useful for
- multi user systems. If unsure, say N.
-
-config QUOTA_NETLINK_INTERFACE
- bool "Report quota messages through netlink interface"
- depends on QUOTA && NET
- help
- If you say Y here, quota warnings (about exceeding softlimit, reaching
- hardlimit, etc.) will be reported through netlink interface. If unsure,
- say Y.
-
-config PRINT_QUOTA_WARNING
- bool "Print quota warnings to console (OBSOLETE)"
- depends on QUOTA
- default y
- help
- If you say Y here, quota warnings (about exceeding softlimit, reaching
- hardlimit, etc.) will be printed to the process' controlling terminal.
- Note that this behavior is currently deprecated and may go away in
- future. Please use notification via netlink socket instead.
-
-config QFMT_V1
- tristate "Old quota format support"
- depends on QUOTA
- help
- This quota format was (is) used by kernels earlier than 2.4.22. If
- you have quota working and you don't want to convert to new quota
- format say Y here.
-
-config QFMT_V2
- tristate "Quota format v2 support"
- depends on QUOTA
- help
- This quota format allows using quotas with 32-bit UIDs/GIDs. If you
- need this functionality say Y here.
-
-config QUOTACTL
- bool
- depends on XFS_QUOTA || QUOTA
+config FILE_LOCKING
+ bool "Enable POSIX file locking API" if EMBEDDED
default y
-
-config AUTOFS_FS
- tristate "Kernel automounter support"
help
- The automounter is a tool to automatically mount remote file systems
- on demand. This implementation is partially kernel-based to reduce
- overhead in the already-mounted case; this is unlike the BSD
- automounter (amd), which is a pure user space daemon.
+ This option enables standard file locking support, required
+ for filesystems like NFS and for the flock() system
+ call. Disabling this option saves about 11k.
- To use the automounter you need the user-space tools from the autofs
- package; you can find the location in <file:Documentation/Changes>.
- You also want to answer Y to "NFS file system support", below.
+source "fs/notify/Kconfig"
- If you want to use the newer version of the automounter with more
- features, say N here and say Y to "Kernel automounter v4 support",
- below.
+source "fs/quota/Kconfig"
- To compile this support as a module, choose M here: the module will be
- called autofs.
+source "fs/autofs/Kconfig"
+source "fs/autofs4/Kconfig"
+source "fs/fuse/Kconfig"
- If you are not a part of a fairly large, distributed network, you
- probably do not need an automounter, and can say N here.
-
-config AUTOFS4_FS
- tristate "Kernel automounter version 4 support (also supports v3)"
- help
- The automounter is a tool to automatically mount remote file systems
- on demand. This implementation is partially kernel-based to reduce
- overhead in the already-mounted case; this is unlike the BSD
- automounter (amd), which is a pure user space daemon.
-
- To use the automounter you need the user-space tools from
- <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
- want to answer Y to "NFS file system support", below.
-
- To compile this support as a module, choose M here: the module will be
- called autofs4. You will need to add "alias autofs autofs4" to your
- modules configuration file.
-
- If you are not a part of a fairly large, distributed network or
- don't have a laptop which needs to dynamically reconfigure to the
- local network, you probably do not need an automounter, and can say
- N here.
-
-config FUSE_FS
- tristate "Filesystem in Userspace support"
+config CUSE
+ tristate "Character device in Userpace support"
+ depends on FUSE_FS
help
- With FUSE it is possible to implement a fully functional filesystem
- in a userspace program.
-
- There's also companion library: libfuse. This library along with
- utilities is available from the FUSE homepage:
- <http://fuse.sourceforge.net/>
-
- See <file:Documentation/filesystems/fuse.txt> for more information.
- See <file:Documentation/Changes> for needed library/utility version.
+ This FUSE extension allows character devices to be
+ implemented in userspace.
- If you want to develop a userspace FS, or if you want to use
- a filesystem based on FUSE, answer Y or M.
+ If you want to develop or use userspace character device
+ based on CUSE, answer Y or M.
config GENERIC_ACL
bool
select FS_POSIX_ACL
-if BLOCK
-menu "CD-ROM/DVD Filesystems"
-
-config ISO9660_FS
- tristate "ISO 9660 CDROM file system support"
- help
- This is the standard file system used on CD-ROMs. It was previously
- known as "High Sierra File System" and is called "hsfs" on other
- Unix systems. The so-called Rock-Ridge extensions which allow for
- long Unix filenames and symbolic links are also supported by this
- driver. If you have a CD-ROM drive and want to do more with it than
- just listen to audio CDs and watch its LEDs, say Y (and read
- <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>), thereby
- enlarging your kernel by about 27 KB; otherwise say N.
-
- To compile this file system support as a module, choose M here: the
- module will be called isofs.
-
-config JOLIET
- bool "Microsoft Joliet CDROM extensions"
- depends on ISO9660_FS
- select NLS
- help
- Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system
- which allows for long filenames in unicode format (unicode is the
- new 16 bit character code, successor to ASCII, which encodes the
- characters of almost all languages of the world; see
- <http://www.unicode.org/> for more information). Say Y here if you
- want to be able to read Joliet CD-ROMs under Linux.
-
-config ZISOFS
- bool "Transparent decompression extension"
- depends on ISO9660_FS
- select ZLIB_INFLATE
- help
- This is a Linux-specific extension to RockRidge which lets you store
- data in compressed form on a CD-ROM and have it transparently
- decompressed when the CD-ROM is accessed. See
- <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools
- necessary to create such a filesystem. Say Y here if you want to be
- able to read such compressed CD-ROMs.
+menu "Caches"
-config UDF_FS
- tristate "UDF file system support"
- select CRC_ITU_T
- help
- This is the new file system used on some CD-ROMs and DVDs. Say Y if
- you intend to mount DVD discs or CDRW's written in packet mode, or
- if written to by other UDF utilities, such as DirectCD.
- Please read <file:Documentation/filesystems/udf.txt>.
+source "fs/fscache/Kconfig"
+source "fs/cachefiles/Kconfig"
- To compile this file system support as a module, choose M here: the
- module will be called udf.
+endmenu
- If unsure, say N.
+if BLOCK
+menu "CD-ROM/DVD Filesystems"
-config UDF_NLS
- bool
- default y
- depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y)
+source "fs/isofs/Kconfig"
+source "fs/udf/Kconfig"
endmenu
endif # BLOCK
if BLOCK
menu "DOS/FAT/NT Filesystems"
-config FAT_FS
- tristate
- select NLS
- help
- If you want to use one of the FAT-based file systems (the MS-DOS and
- VFAT (Windows 95) file systems), then you must say Y or M here
- to include FAT support. You will then be able to mount partitions or
- diskettes with FAT-based file systems and transparently access the
- files on them, i.e. MSDOS files will look and behave just like all
- other Unix files.
-
- This FAT support is not a file system in itself, it only provides
- the foundation for the other file systems. You will have to say Y or
- M to at least one of "MSDOS fs support" or "VFAT fs support" in
- order to make use of it.
-
- Another way to read and write MSDOS floppies and hard drive
- partitions from within Linux (but not transparently) is with the
- mtools ("man mtools") program suite. You don't need to say Y here in
- order to do that.
-
- If you need to move large files on floppies between a DOS and a
- Linux box, say Y here, mount the floppy under Linux with an MSDOS
- file system and use GNU tar's M option. GNU tar is a program
- available for Unix and DOS ("man tar" or "info tar").
-
- The FAT support will enlarge your kernel by about 37 KB. If unsure,
- say Y.
-
- To compile this as a module, choose M here: the module will be called
- fat. Note that if you compile the FAT support as a module, you
- cannot compile any of the FAT-based file systems into the kernel
- -- they will have to be modules as well.
-
-config MSDOS_FS
- tristate "MSDOS fs support"
- select FAT_FS
- help
- This allows you to mount MSDOS partitions of your hard drive (unless
- they are compressed; to access compressed MSDOS partitions under
- Linux, you can either use the DOS emulator DOSEMU, described in the
- DOSEMU-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in
- <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you
- intend to use dosemu with a non-compressed MSDOS partition, say Y
- here) and MSDOS floppies. This means that file access becomes
- transparent, i.e. the MSDOS files look and behave just like all
- other Unix files.
-
- If you have Windows 95 or Windows NT installed on your MSDOS
- partitions, you should use the VFAT file system (say Y to "VFAT fs
- support" below), or you will not be able to see the long filenames
- generated by Windows 95 / Windows NT.
-
- This option will enlarge your kernel by about 7 KB. If unsure,
- answer Y. This will only work if you said Y to "DOS FAT fs support"
- as well. To compile this as a module, choose M here: the module will
- be called msdos.
-
-config VFAT_FS
- tristate "VFAT (Windows-95) fs support"
- select FAT_FS
- help
- This option provides support for normal Windows file systems with
- long filenames. That includes non-compressed FAT-based file systems
- used by Windows 95, Windows 98, Windows NT 4.0, and the Unix
- programs from the mtools package.
-
- The VFAT support enlarges your kernel by about 10 KB and it only
- works if you said Y to the "DOS FAT fs support" above. Please read
- the file <file:Documentation/filesystems/vfat.txt> for details. If
- unsure, say Y.
-
- To compile this as a module, choose M here: the module will be called
- vfat.
-
-config FAT_DEFAULT_CODEPAGE
- int "Default codepage for FAT"
- depends on MSDOS_FS || VFAT_FS
- default 437
- help
- This option should be set to the codepage of your FAT filesystems.
- It can be overridden with the "codepage" mount option.
- See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config FAT_DEFAULT_IOCHARSET
- string "Default iocharset for FAT"
- depends on VFAT_FS
- default "iso8859-1"
- help
- Set this to the default input/output character set you'd
- like FAT to use. It should probably match the character set
- that most of your FAT filesystems use, and can be overridden
- with the "iocharset" mount option for FAT filesystems.
- Note that "utf8" is not recommended for FAT filesystems.
- If unsure, you shouldn't set "utf8" here.
- See <file:Documentation/filesystems/vfat.txt> for more information.
-
-config NTFS_FS
- tristate "NTFS file system support"
- select NLS
- help
- NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003.
-
- Saying Y or M here enables read support. There is partial, but
- safe, write support available. For write support you must also
- say Y to "NTFS write support" below.
-
- There are also a number of user-space tools available, called
- ntfsprogs. These include ntfsundelete and ntfsresize, that work
- without NTFS support enabled in the kernel.
-
- This is a rewrite from scratch of Linux NTFS support and replaced
- the old NTFS code starting with Linux 2.5.11. A backport to
- the Linux 2.4 kernel series is separately available as a patch
- from the project web site.
-
- For more information see <file:Documentation/filesystems/ntfs.txt>
- and <http://www.linux-ntfs.org/>.
-
- To compile this file system support as a module, choose M here: the
- module will be called ntfs.
-
- If you are not using Windows NT, 2000, XP or 2003 in addition to
- Linux on your computer it is safe to say N.
-
-config NTFS_DEBUG
- bool "NTFS debugging support"
- depends on NTFS_FS
- help
- If you are experiencing any problems with the NTFS file system, say
- Y here. This will result in additional consistency checks to be
- performed by the driver as well as additional debugging messages to
- be written to the system log. Note that debugging messages are
- disabled by default. To enable them, supply the option debug_msgs=1
- at the kernel command line when booting the kernel or as an option
- to insmod when loading the ntfs module. Once the driver is active,
- you can enable debugging messages by doing (as root):
- echo 1 > /proc/sys/fs/ntfs-debug
- Replacing the "1" with "0" would disable debug messages.
-
- If you leave debugging messages disabled, this results in little
- overhead, but enabling debug messages results in very significant
- slowdown of the system.
-
- When reporting bugs, please try to have available a full dump of
- debugging messages while the misbehaviour was occurring.
-
-config NTFS_RW
- bool "NTFS write support"
- depends on NTFS_FS
- help
- This enables the partial, but safe, write support in the NTFS driver.
-
- The only supported operation is overwriting existing files, without
- changing the file length. No file or directory creation, deletion or
- renaming is possible. Note only non-resident files can be written to
- so you may find that some very small files (<500 bytes or so) cannot
- be written to.
-
- While we cannot guarantee that it will not damage any data, we have
- so far not received a single report where the driver would have
- damaged someones data so we assume it is perfectly safe to use.
-
- Note: While write support is safe in this version (a rewrite from
- scratch of the NTFS support), it should be noted that the old NTFS
- write support, included in Linux 2.5.10 and before (since 1997),
- is not safe.
-
- This is currently useful with TopologiLinux. TopologiLinux is run
- on top of any DOS/Microsoft Windows system without partitioning your
- hard disk. Unlike other Linux distributions TopologiLinux does not
- need its own partition. For more information see
- <http://topologi-linux.sourceforge.net/>
-
- It is perfectly safe to say N here.
+source "fs/fat/Kconfig"
+source "fs/ntfs/Kconfig"
endmenu
endif # BLOCK
menu "Pseudo filesystems"
source "fs/proc/Kconfig"
-
-config SYSFS
- bool "sysfs file system support" if EMBEDDED
- default y
- help
- The sysfs filesystem is a virtual filesystem that the kernel uses to
- export internal kernel objects, their attributes, and their
- relationships to one another.
-
- Users can use sysfs to ascertain useful information about the running
- kernel, such as the devices the kernel has discovered on each bus and
- which driver each is bound to. sysfs can also be used to tune devices
- and other kernel subsystems.
-
- Some system agents rely on the information in sysfs to operate.
- /sbin/hotplug uses device and object attributes in sysfs to assist in
- delegating policy decisions, like persistently naming devices.
-
- sysfs is currently used by the block subsystem to mount the root
- partition. If sysfs is disabled you must specify the boot device on
- the kernel boot command line via its major and minor numbers. For
- example, "root=03:01" for /dev/hda1.
-
- Designers of embedded systems may wish to say N here to conserve space.
+source "fs/sysfs/Kconfig"
config TMPFS
bool "Virtual memory file system support (former shm fs)"
+ depends on SHMEM
help
Tmpfs is a file system which keeps all files in virtual memory.
config HUGETLBFS
bool "HugeTLB file system support"
- depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \
- (S390 && 64BIT) || BROKEN
+ depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \
+ SYS_SUPPORTS_HUGETLBFS || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
config HUGETLB_PAGE
def_bool HUGETLBFS
-config CONFIGFS_FS
- tristate "Userspace-driven configuration filesystem"
- depends on SYSFS
- help
- configfs is a ram-based filesystem that provides the converse
- of sysfs's functionality. Where sysfs is a filesystem-based
- view of kernel objects, configfs is a filesystem-based manager
- of kernel objects, or config_items.
-
- Both sysfs and configfs can and should exist together on the
- same system. One is not a replacement for the other.
+source "fs/configfs/Kconfig"
endmenu
-menu "Miscellaneous filesystems"
+menuconfig MISC_FILESYSTEMS
+ bool "Miscellaneous filesystems"
+ default y
+ ---help---
+ Say Y here to get to see options for various miscellaneous
+ filesystems, such as filesystems that came from other
+ operating systems.
-config ADFS_FS
- tristate "ADFS file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- The Acorn Disc Filing System is the standard file system of the
- RiscOS operating system which runs on Acorn's ARM-based Risc PC
- systems and the Acorn Archimedes range of machines. If you say Y
- here, Linux will be able to read from ADFS partitions on hard drives
- and from ADFS-formatted floppy discs. If you also want to be able to
- write to those devices, say Y to "ADFS write support" below.
+ This option alone does not add any kernel code.
- The ADFS partition should be the first partition (i.e.,
- /dev/[hs]d?1) on each of your drives. Please read the file
- <file:Documentation/filesystems/adfs.txt> for further details.
+ If you say N, all options in this submenu will be skipped and
+ disabled; if unsure, say Y here.
- To compile this code as a module, choose M here: the module will be
- called adfs.
-
- If unsure, say N.
-
-config ADFS_FS_RW
- bool "ADFS write support (DANGEROUS)"
- depends on ADFS_FS
- help
- If you say Y here, you will be able to write to ADFS partitions on
- hard drives and ADFS-formatted floppy disks. This is experimental
- codes, so if you're unsure, say N.
-
-config AFFS_FS
- tristate "Amiga FFS file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- The Fast File System (FFS) is the common file system used on hard
- disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y
- if you want to be able to read and write files from and to an Amiga
- FFS partition on your hard drive. Amiga floppies however cannot be
- read with this driver due to an incompatibility of the floppy
- controller used in an Amiga and the standard floppy controller in
- PCs and workstations. Read <file:Documentation/filesystems/affs.txt>
- and <file:fs/affs/Changes>.
-
- With this driver you can also mount disk files used by Bernd
- Schmidt's Un*X Amiga Emulator
- (<http://www.freiburg.linux.de/~uae/>).
- If you want to do this, you will also need to say Y or M to "Loop
- device support", above.
-
- To compile this file system support as a module, choose M here: the
- module will be called affs. If unsure, say N.
-
-config ECRYPT_FS
- tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && KEYS && CRYPTO && NET
- help
- Encrypted filesystem that operates on the VFS layer. See
- <file:Documentation/filesystems/ecryptfs.txt> to learn more about
- eCryptfs. Userspace components are required and can be
- obtained from <http://ecryptfs.sf.net>.
-
- To compile this file system support as a module, choose M here: the
- module will be called ecryptfs.
-
-config HFS_FS
- tristate "Apple Macintosh file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- select NLS
- help
- If you say Y here, you will be able to mount Macintosh-formatted
- floppy disks and hard drive partitions with full read-write access.
- Please read <file:Documentation/filesystems/hfs.txt> to learn about
- the available mount options.
-
- To compile this file system support as a module, choose M here: the
- module will be called hfs.
-
-config HFSPLUS_FS
- tristate "Apple Extended HFS file system support"
- depends on BLOCK
- select NLS
- select NLS_UTF8
- help
- If you say Y here, you will be able to mount extended format
- Macintosh-formatted hard drive partitions with full read-write access.
-
- This file system is often called HFS+ and was introduced with
- MacOS 8. It includes all Mac specific filesystem data such as
- data forks and creator codes, but it also has several UNIX
- style features such as file ownership and permissions.
-
-config BEFS_FS
- tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- select NLS
- help
- The BeOS File System (BeFS) is the native file system of Be, Inc's
- BeOS. Notable features include support for arbitrary attributes
- on files and directories, and database-like indices on selected
- attributes. (Also note that this driver doesn't make those features
- available at this time). It is a 64 bit filesystem, so it supports
- extremely large volumes and files.
-
- If you use this filesystem, you should also say Y to at least one
- of the NLS (native language support) options below.
-
- If you don't know what this is about, say N.
-
- To compile this as a module, choose M here: the module will be
- called befs.
-
-config BEFS_DEBUG
- bool "Debug BeFS"
- depends on BEFS_FS
- help
- If you say Y here, you can use the 'debug' mount option to enable
- debugging output from the driver.
-
-config BFS_FS
- tristate "BFS file system support (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- Boot File System (BFS) is a file system used under SCO UnixWare to
- allow the bootloader access to the kernel image and other important
- files during the boot process. It is usually mounted under /stand
- and corresponds to the slice marked as "STAND" in the UnixWare
- partition. You should say Y if you want to read or write the files
- on your /stand slice from within Linux. You then also need to say Y
- to "UnixWare slices support", below. More information about the BFS
- file system is contained in the file
- <file:Documentation/filesystems/bfs.txt>.
-
- If you don't know what this is about, say N.
-
- To compile this as a module, choose M here: the module will be called
- bfs. Note that the file system of your root partition (the one
- containing the directory /) cannot be compiled as a module.
-
-
-
-config EFS_FS
- tristate "EFS file system support (read only) (EXPERIMENTAL)"
- depends on BLOCK && EXPERIMENTAL
- help
- EFS is an older file system used for non-ISO9660 CD-ROMs and hard
- disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer
- uses the XFS file system for hard disk partitions however).
-
- This implementation only offers read-only access. If you don't know
- what all this is about, it's safe to say N. For more information
- about EFS see its home page at <http://aeschi.ch.eu.org/efs/>.
-
- To compile the EFS file system support as a module, choose M here: the
- module will be called efs.
-
-config JFFS2_FS
- tristate "Journalling Flash File System v2 (JFFS2) support"
- select CRC32
- depends on MTD
- help
- JFFS2 is the second generation of the Journalling Flash File System
- for use on diskless embedded devices. It provides improved wear
- levelling, compression and support for hard links. You cannot use
- this on normal block devices, only on 'MTD' devices.
-
- Further information on the design and implementation of JFFS2 is
- available at <http://sources.redhat.com/jffs2/>.
-
-config JFFS2_FS_DEBUG
- int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
- depends on JFFS2_FS
- default "0"
- help
- This controls the amount of debugging messages produced by the JFFS2
- code. Set it to zero for use in production systems. For evaluation,
- testing and debugging, it's advisable to set it to one. This will
- enable a few assertions and will print debugging messages at the
- KERN_DEBUG loglevel, where they won't normally be visible. Level 2
- is unlikely to be useful - it enables extra debugging in certain
- areas which at one point needed debugging, but when the bugs were
- located and fixed, the detailed messages were relegated to level 2.
-
- If reporting bugs, please try to have available a full dump of the
- messages at debug level 1 while the misbehaviour was occurring.
-
-config JFFS2_FS_WRITEBUFFER
- bool "JFFS2 write-buffering support"
- depends on JFFS2_FS
- default y
- help
- This enables the write-buffering support in JFFS2.
-
- This functionality is required to support JFFS2 on the following
- types of flash devices:
- - NAND flash
- - NOR flash with transparent ECC
- - DataFlash
-
-config JFFS2_FS_WBUF_VERIFY
- bool "Verify JFFS2 write-buffer reads"
- depends on JFFS2_FS_WRITEBUFFER
- default n
- help
- This causes JFFS2 to read back every page written through the
- write-buffer, and check for errors.
-
-config JFFS2_SUMMARY
- bool "JFFS2 summary support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- This feature makes it possible to use summary information
- for faster filesystem mount.
-
- The summary information can be inserted into a filesystem image
- by the utility 'sumtool'.
-
- If unsure, say 'N'.
-
-config JFFS2_FS_XATTR
- bool "JFFS2 XATTR support (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config JFFS2_FS_POSIX_ACL
- bool "JFFS2 POSIX Access Control Lists"
- depends on JFFS2_FS_XATTR
- default y
- select FS_POSIX_ACL
- help
- Posix Access Control Lists (ACLs) support permissions for users and
- groups beyond the owner/group/world scheme.
-
- To learn more about Access Control Lists, visit the Posix ACLs for
- Linux website <http://acl.bestbits.at/>.
-
- If you don't know what Access Control Lists are, say N
-
-config JFFS2_FS_SECURITY
- bool "JFFS2 Security Labels"
- depends on JFFS2_FS_XATTR
- default y
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the jffs2 filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
-config JFFS2_COMPRESSION_OPTIONS
- bool "Advanced compression options for JFFS2"
- depends on JFFS2_FS
- default n
- help
- Enabling this option allows you to explicitly choose which
- compression modules, if any, are enabled in JFFS2. Removing
- compressors can mean you cannot read existing file systems,
- and enabling experimental compressors can mean that you
- write a file system which cannot be read by a standard kernel.
-
- If unsure, you should _definitely_ say 'N'.
-
-config JFFS2_ZLIB
- bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
- select ZLIB_INFLATE
- select ZLIB_DEFLATE
- depends on JFFS2_FS
- default y
- help
- Zlib is designed to be a free, general-purpose, legally unencumbered,
- lossless data-compression library for use on virtually any computer
- hardware and operating system. See <http://www.gzip.org/zlib/> for
- further information.
-
- Say 'Y' if unsure.
-
-config JFFS2_LZO
- bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
- select LZO_COMPRESS
- select LZO_DECOMPRESS
- depends on JFFS2_FS
- default n
- help
- minilzo-based compression. Generally works better than Zlib.
-
- This feature was added in July, 2007. Say 'N' if you need
- compatibility with older bootloaders or kernels.
-
-config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default y
- help
- Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
-
-config JFFS2_RUBIN
- bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
- default n
- help
- RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
-
-choice
- prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
- default JFFS2_CMODE_PRIORITY
- depends on JFFS2_FS
- help
- You can set here the default compression mode of JFFS2 from
- the available compression modes. Don't touch if unsure.
-
-config JFFS2_CMODE_NONE
- bool "no compression"
- help
- Uses no compression.
-
-config JFFS2_CMODE_PRIORITY
- bool "priority"
- help
- Tries the compressors in a predefined order and chooses the first
- successful one.
-
-config JFFS2_CMODE_SIZE
- bool "size (EXPERIMENTAL)"
- help
- Tries all compressors and chooses the one which has the smallest
- result.
-
-config JFFS2_CMODE_FAVOURLZO
- bool "Favour LZO"
- help
- Tries all compressors and chooses the one which has the smallest
- result but gives some preference to LZO (which has faster
- decompression) at the expense of size.
-
-endchoice
-
-# UBIFS File system configuration
-source "fs/ubifs/Kconfig"
-
-config CRAMFS
- tristate "Compressed ROM file system support (cramfs)"
- depends on BLOCK
- select ZLIB_INFLATE
- help
- Saying Y here includes support for CramFs (Compressed ROM File
- System). CramFs is designed to be a simple, small, and compressed
- file system for ROM based embedded systems. CramFs is read-only,
- limited to 256MB file systems (with 16MB files), and doesn't support
- 16/32 bits uid/gid, hard links and timestamps.
-
- See <file:Documentation/filesystems/cramfs.txt> and
- <file:fs/cramfs/README> for further information.
-
- To compile this as a module, choose M here: the module will be called
- cramfs. Note that the root file system (the one containing the
- directory /) cannot be compiled as a module.
-
- If unsure, say N.
-
-config VXFS_FS
- tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
- depends on BLOCK
- help
- FreeVxFS is a file system driver that support the VERITAS VxFS(TM)
- file system format. VERITAS VxFS(TM) is the standard file system
- of SCO UnixWare (and possibly others) and optionally available
- for Sunsoft Solaris, HP-UX and many other operating systems.
- Currently only readonly access is supported.
-
- NOTE: the file system type as used by mount(1), mount(2) and
- fstab(5) is 'vxfs' as it describes the file system format, not
- the actual driver.
-
- To compile this as a module, choose M here: the module will be
- called freevxfs. If unsure, say N.
-
-config MINIX_FS
- tristate "Minix file system support"
- depends on BLOCK
- help
- Minix is a simple operating system used in many classes about OS's.
- The minix file system (method to organize files on a hard disk
- partition or a floppy disk) was the original file system for Linux,
- but has been superseded by the second extended file system ext2fs.
- You don't want to use the minix file system on your hard disk
- because of certain built-in restrictions, but it is sometimes found
- on older Linux floppy disks. This option will enlarge your kernel
- by about 28 KB. If unsure, say N.
-
- To compile this file system support as a module, choose M here: the
- module will be called minix. Note that the file system of your root
- partition (the one containing the directory /) cannot be compiled as
- a module.
-
-config OMFS_FS
- tristate "SonicBlue Optimized MPEG File System support"
- depends on BLOCK
- select CRC_ITU_T
- help
- This is the proprietary file system used by the Rio Karma music
- player and ReplayTV DVR. Despite the name, this filesystem is not
- more efficient than a standard FS for MPEG files, in fact likely
- the opposite is true. Say Y if you have either of these devices
- and wish to mount its disk.
-
- To compile this file system support as a module, choose M here: the
- module will be called omfs. If unsure, say N.
-
-config HPFS_FS
- tristate "OS/2 HPFS file system support"
- depends on BLOCK
- help
- OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS
- is the file system used for organizing files on OS/2 hard disk
- partitions. Say Y if you want to be able to read files from and
- write files to an OS/2 HPFS partition on your hard drive. OS/2
- floppies however are in regular MSDOS format, so you don't need this
- option in order to be able to read them. Read
- <file:Documentation/filesystems/hpfs.txt>.
-
- To compile this file system support as a module, choose M here: the
- module will be called hpfs. If unsure, say N.
-
-
-config QNX4FS_FS
- tristate "QNX4 file system support (read only)"
- depends on BLOCK
- help
- This is the file system used by the real-time operating systems
- QNX 4 and QNX 6 (the latter is also called QNX RTP).
- Further information is available at <http://www.qnx.com/>.
- Say Y if you intend to mount QNX hard disks or floppies.
- Unless you say Y to "QNX4FS read-write support" below, you will
- only be able to read these file systems.
-
- To compile this file system support as a module, choose M here: the
- module will be called qnx4.
-
- If you don't know whether you need it, then you don't need it:
- answer N.
-
-config QNX4FS_RW
- bool "QNX4FS write support (DANGEROUS)"
- depends on QNX4FS_FS && EXPERIMENTAL && BROKEN
- help
- Say Y if you want to test write support for QNX4 file systems.
-
- It's currently broken, so for now:
- answer N.
-
-config ROMFS_FS
- tristate "ROM file system support"
- depends on BLOCK
- ---help---
- This is a very small read-only file system mainly intended for
- initial ram disks of installation disks, but it could be used for
- other read-only media as well. Read
- <file:Documentation/filesystems/romfs.txt> for details.
-
- To compile this file system support as a module, choose M here: the
- module will be called romfs. Note that the file system of your
- root partition (the one containing the directory /) cannot be a
- module.
-
- If you don't know whether you need it, then you don't need it:
- answer N.
-
-
-config SYSV_FS
- tristate "System V/Xenix/V7/Coherent file system support"
- depends on BLOCK
- help
- SCO, Xenix and Coherent are commercial Unix systems for Intel
- machines, and Version 7 was used on the DEC PDP-11. Saying Y
- here would allow you to read from their floppies and hard disk
- partitions.
-
- If you have floppies or hard disk partitions like that, it is likely
- that they contain binaries from those other Unix systems; in order
- to run these binaries, you will want to install linux-abi which is
- a set of kernel modules that lets you run SCO, Xenix, Wyse,
- UnixWare, Dell Unix and System V programs under Linux. It is
- available via FTP (user: ftp) from
- <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>).
- NOTE: that will work only for binaries from Intel-based systems;
- PDP ones will have to wait until somebody ports Linux to -11 ;-)
-
- If you only intend to mount files from some other Unix over the
- network using NFS, you don't need the System V file system support
- (but you need NFS file system support obviously).
-
- Note that this option is generally not needed for floppies, since a
- good portable way to transport files and directories between unixes
- (and even other operating systems) is given by the tar program ("man
- tar" or preferably "info tar"). Note also that this option has
- nothing whatsoever to do with the option "System V IPC". Read about
- the System V file system in
- <file:Documentation/filesystems/sysv-fs.txt>.
- Saying Y here will enlarge your kernel by about 27 KB.
-
- To compile this as a module, choose M here: the module will be called
- sysv.
-
- If you haven't heard about all of this before, it's safe to say N.
-
-
-config UFS_FS
- tristate "UFS file system support (read only)"
- depends on BLOCK
- help
- BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD,
- OpenBSD and NeXTstep) use a file system called UFS. Some System V
- Unixes can create and mount hard disk partitions and diskettes using
- this file system as well. Saying Y here will allow you to read from
- these partitions; if you also want to write to them, say Y to the
- experimental "UFS file system write support", below. Please read the
- file <file:Documentation/filesystems/ufs.txt> for more information.
-
- The recently released UFS2 variant (used in FreeBSD 5.x) is
- READ-ONLY supported.
-
- Note that this option is generally not needed for floppies, since a
- good portable way to transport files and directories between unixes
- (and even other operating systems) is given by the tar program ("man
- tar" or preferably "info tar").
-
- When accessing NeXTstep files, you may need to convert them from the
- NeXT character set to the Latin1 character set; use the program
- recode ("info recode") for this purpose.
-
- To compile the UFS file system support as a module, choose M here: the
- module will be called ufs.
-
- If you haven't heard about all of this before, it's safe to say N.
-
-config UFS_FS_WRITE
- bool "UFS file system write support (DANGEROUS)"
- depends on UFS_FS && EXPERIMENTAL
- help
- Say Y here if you want to try writing to UFS partitions. This is
- experimental, so you should back up your UFS partitions beforehand.
-
-config UFS_DEBUG
- bool "UFS debugging"
- depends on UFS_FS
- help
- If you are experiencing any problems with the UFS filesystem, say
- Y here. This will result in _many_ additional debugging messages to be
- written to the system log.
-
-endmenu
+if MISC_FILESYSTEMS
+
+source "fs/adfs/Kconfig"
+source "fs/affs/Kconfig"
+source "fs/ecryptfs/Kconfig"
+source "fs/hfs/Kconfig"
+source "fs/hfsplus/Kconfig"
+source "fs/befs/Kconfig"
+source "fs/bfs/Kconfig"
+source "fs/efs/Kconfig"
+source "fs/jffs2/Kconfig"
+# UBIFS File system configuration
+source "fs/ubifs/Kconfig"
+source "fs/cramfs/Kconfig"
+source "fs/squashfs/Kconfig"
+source "fs/freevxfs/Kconfig"
+source "fs/minix/Kconfig"
+source "fs/omfs/Kconfig"
+source "fs/hpfs/Kconfig"
+source "fs/qnx4/Kconfig"
+source "fs/romfs/Kconfig"
+source "fs/sysv/Kconfig"
+source "fs/ufs/Kconfig"
+source "fs/exofs/Kconfig"
+
+endif # MISC_FILESYSTEMS
menuconfig NETWORK_FILESYSTEMS
bool "Network File Systems"
if NETWORK_FILESYSTEMS
-config NFS_FS
- tristate "NFS client support"
- depends on INET
- select LOCKD
- select SUNRPC
- select NFS_ACL_SUPPORT if NFS_V3_ACL
- help
- Choose Y here if you want to access files residing on other
- computers using Sun's Network File System protocol. To compile
- this file system support as a module, choose M here: the module
- will be called nfs.
-
- To mount file systems exported by NFS servers, you also need to
- install the user space mount.nfs command which can be found in
- the Linux nfs-utils package, available from http://linux-nfs.org/.
- Information about using the mount command is available in the
- mount(8) man page. More detail about the Linux NFS client
- implementation is available via the nfs(5) man page.
-
- Below you can choose which versions of the NFS protocol are
- available in the kernel to mount NFS servers. Support for NFS
- version 2 (RFC 1094) is always available when NFS_FS is selected.
-
- To configure a system which mounts its root file system via NFS
- at boot time, say Y here, select "Kernel level IP
- autoconfiguration" in the NETWORK menu, and select "Root file
- system on NFS" below. You cannot compile this file system as a
- module in this case.
-
- If unsure, say N.
-
-config NFS_V3
- bool "NFS client support for NFS version 3"
- depends on NFS_FS
- help
- This option enables support for version 3 of the NFS protocol
- (RFC 1813) in the kernel's NFS client.
-
- If unsure, say Y.
-
-config NFS_V3_ACL
- bool "NFS client support for the NFSv3 ACL protocol extension"
- depends on NFS_V3
- help
- Some NFS servers support an auxiliary NFSv3 ACL protocol that
- Sun added to Solaris but never became an official part of the
- NFS version 3 protocol. This protocol extension allows
- applications on NFS clients to manipulate POSIX Access Control
- Lists on files residing on NFS servers. NFS servers enforce
- ACLs on local files whether this protocol is available or not.
-
- Choose Y here if your NFS server supports the Solaris NFSv3 ACL
- protocol extension and you want your NFS client to allow
- applications to access and modify ACLs on files on the server.
-
- Most NFS servers don't support the Solaris NFSv3 ACL protocol
- extension. You can choose N here or specify the "noacl" mount
- option to prevent your NFS client from trying to use the NFSv3
- ACL protocol.
-
- If unsure, say N.
-
-config NFS_V4
- bool "NFS client support for NFS version 4 (EXPERIMENTAL)"
- depends on NFS_FS && EXPERIMENTAL
- select RPCSEC_GSS_KRB5
- help
- This option enables support for version 4 of the NFS protocol
- (RFC 3530) in the kernel's NFS client.
-
- To mount NFS servers using NFSv4, you also need to install user
- space programs which can be found in the Linux nfs-utils package,
- available from http://linux-nfs.org/.
-
- If unsure, say N.
-
-config ROOT_NFS
- bool "Root file system on NFS"
- depends on NFS_FS=y && IP_PNP
- help
- If you want your system to mount its root file system via NFS,
- choose Y here. This is common practice for managing systems
- without local permanent storage. For details, read
- <file:Documentation/filesystems/nfsroot.txt>.
-
- Most people say N here.
-
-config NFSD
- tristate "NFS server support"
- depends on INET
- select LOCKD
- select SUNRPC
- select EXPORTFS
- select NFS_ACL_SUPPORT if NFSD_V2_ACL
- help
- Choose Y here if you want to allow other computers to access
- files residing on this system using Sun's Network File System
- protocol. To compile the NFS server support as a module,
- choose M here: the module will be called nfsd.
-
- You may choose to use a user-space NFS server instead, in which
- case you can choose N here.
-
- To export local file systems using NFS, you also need to install
- user space programs which can be found in the Linux nfs-utils
- package, available from http://linux-nfs.org/. More detail about
- the Linux NFS server implementation is available via the
- exports(5) man page.
-
- Below you can choose which versions of the NFS protocol are
- available to clients mounting the NFS server on this system.
- Support for NFS version 2 (RFC 1094) is always available when
- CONFIG_NFSD is selected.
-
- If unsure, say N.
-
-config NFSD_V2_ACL
- bool
- depends on NFSD
-
-config NFSD_V3
- bool "NFS server support for NFS version 3"
- depends on NFSD
- help
- This option enables support in your system's NFS server for
- version 3 of the NFS protocol (RFC 1813).
-
- If unsure, say Y.
-
-config NFSD_V3_ACL
- bool "NFS server support for the NFSv3 ACL protocol extension"
- depends on NFSD_V3
- select NFSD_V2_ACL
- help
- Solaris NFS servers support an auxiliary NFSv3 ACL protocol that
- never became an official part of the NFS version 3 protocol.
- This protocol extension allows applications on NFS clients to
- manipulate POSIX Access Control Lists on files residing on NFS
- servers. NFS servers enforce POSIX ACLs on local files whether
- this protocol is available or not.
-
- This option enables support in your system's NFS server for the
- NFSv3 ACL protocol extension allowing NFS clients to manipulate
- POSIX ACLs on files exported by your system's NFS server. NFS
- clients which support the Solaris NFSv3 ACL protocol can then
- access and modify ACLs on your NFS server.
-
- To store ACLs on your NFS server, you also need to enable ACL-
- related CONFIG options for your local file systems of choice.
-
- If unsure, say N.
-
-config NFSD_V4
- bool "NFS server support for NFS version 4 (EXPERIMENTAL)"
- depends on NFSD && PROC_FS && EXPERIMENTAL
- select NFSD_V3
- select FS_POSIX_ACL
- select RPCSEC_GSS_KRB5
- help
- This option enables support in your system's NFS server for
- version 4 of the NFS protocol (RFC 3530).
-
- To export files using NFSv4, you need to install additional user
- space programs which can be found in the Linux nfs-utils package,
- available from http://linux-nfs.org/.
-
- If unsure, say N.
+source "fs/nfs/Kconfig"
+source "fs/nfsd/Kconfig"
config LOCKD
tristate
+ depends on FILE_LOCKING
config LOCKD_V4
bool
depends on NFSD_V3 || NFS_V3
+ depends on FILE_LOCKING
default y
config EXPORTFS
depends on NFSD || NFS_FS
default y
-config SUNRPC
- tristate
-
-config SUNRPC_GSS
- tristate
-
-config SUNRPC_XPRT_RDMA
- tristate
- depends on SUNRPC && INFINIBAND && EXPERIMENTAL
- default SUNRPC && INFINIBAND
- help
- This option enables an RPC client transport capability that
- allows the NFS client to mount servers via an RDMA-enabled
- transport.
-
- To compile RPC client RDMA transport support as a module,
- choose M here: the module will be called xprtrdma.
-
- If unsure, say N.
-
-config RPCSEC_GSS_KRB5
- tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- select SUNRPC_GSS
- select CRYPTO
- select CRYPTO_MD5
- select CRYPTO_DES
- select CRYPTO_CBC
- help
- Choose Y here to enable Secure RPC using the Kerberos version 5
- GSS-API mechanism (RFC 1964).
-
- Secure RPC calls with Kerberos require an auxiliary user-space
- daemon which may be found in the Linux nfs-utils package
- available from http://linux-nfs.org/. In addition, user-space
- Kerberos support should be installed.
-
- If unsure, say N.
-
-config RPCSEC_GSS_SPKM3
- tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)"
- depends on SUNRPC && EXPERIMENTAL
- select SUNRPC_GSS
- select CRYPTO
- select CRYPTO_MD5
- select CRYPTO_DES
- select CRYPTO_CAST5
- select CRYPTO_CBC
- help
- Choose Y here to enable Secure RPC using the SPKM3 public key
- GSS-API mechansim (RFC 2025).
-
- Secure RPC calls with SPKM3 require an auxiliary userspace
- daemon which may be found in the Linux nfs-utils package
- available from http://linux-nfs.org/.
-
- If unsure, say N.
-
-config SMB_FS
- tristate "SMB file system support (OBSOLETE, please use CIFS)"
- depends on INET
- select NLS
- help
- SMB (Server Message Block) is the protocol Windows for Workgroups
- (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share
- files and printers over local networks. Saying Y here allows you to
- mount their file systems (often called "shares" in this context) and
- access them just like any other Unix directory. Currently, this
- works only if the Windows machines use TCP/IP as the underlying
- transport protocol, and not NetBEUI. For details, read
- <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- Note: if you just want your box to act as an SMB *server* and make
- files and printing services available to Windows clients (which need
- to have a TCP/IP stack), you don't need to say Y here; you can use
- the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>)
- for that.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
- To compile the SMB support as a module, choose M here:
- the module will be called smbfs. Most people say N, however.
-
-config SMB_NLS_DEFAULT
- bool "Use a default NLS"
- depends on SMB_FS
- help
- Enabling this will make smbfs use nls translations by default. You
- need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls
- settings and you need to give the default nls for the SMB server as
- CONFIG_SMB_NLS_REMOTE.
-
- The nls settings can be changed at mount time, if your smbmount
- supports that, using the codepage and iocharset parameters.
-
- smbmount from samba 2.2.0 or later supports this.
-
-config SMB_NLS_REMOTE
- string "Default Remote NLS Option"
- depends on SMB_NLS_DEFAULT
- default "cp437"
- help
- This setting allows you to specify a default value for which
- codepage the server uses. If this field is left blank no
- translations will be done by default. The local codepage/charset
- default to CONFIG_NLS_DEFAULT.
-
- The nls settings can be changed at mount time, if your smbmount
- supports that, using the codepage and iocharset parameters.
-
- smbmount from samba 2.2.0 or later supports this.
-
-config CIFS
- tristate "CIFS support (advanced network filesystem, SMBFS successor)"
- depends on INET
- select NLS
- help
- This is the client VFS module for the Common Internet File System
- (CIFS) protocol which is the successor to the Server Message Block
- (SMB) protocol, the native file sharing mechanism for most early
- PC operating systems. The CIFS protocol is fully supported by
- file servers such as Windows 2000 (including Windows 2003, NT 4
- and Windows XP) as well by Samba (which provides excellent CIFS
- server support for Linux and many other operating systems). Limited
- support for OS/2 and Windows ME and similar servers is provided as
- well.
-
- The cifs module provides an advanced network file system
- client for mounting to CIFS compliant servers. It includes
- support for DFS (hierarchical name space), secure per-user
- session establishment via Kerberos or NTLM or NTLMv2,
- safe distributed caching (oplock), optional packet
- signing, Unicode and other internationalization improvements.
- If you need to mount to Samba or Windows from this machine, say Y.
-
-config CIFS_STATS
- bool "CIFS statistics"
- depends on CIFS
- help
- Enabling this option will cause statistics for each server share
- mounted by the cifs client to be displayed in /proc/fs/cifs/Stats
-
-config CIFS_STATS2
- bool "Extended statistics"
- depends on CIFS_STATS
- help
- Enabling this option will allow more detailed statistics on SMB
- request timing to be displayed in /proc/fs/cifs/DebugData and also
- allow optional logging of slow responses to dmesg (depending on the
- value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details).
- These additional statistics may have a minor effect on performance
- and memory utilization.
-
- Unless you are a developer or are doing network performance analysis
- or tuning, say N.
-
-config CIFS_WEAK_PW_HASH
- bool "Support legacy servers which use weaker LANMAN security"
- depends on CIFS
- help
- Modern CIFS servers including Samba and most Windows versions
- (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
- security mechanisms. These hash the password more securely
- than the mechanisms used in the older LANMAN version of the
- SMB protocol but LANMAN based authentication is needed to
- establish sessions with some old SMB servers.
-
- Enabling this option allows the cifs module to mount to older
- LANMAN based servers such as OS/2 and Windows 95, but such
- mounts may be less secure than mounts using NTLM or more recent
- security mechanisms if you are on a public network. Unless you
- have a need to access old SMB servers (and are on a private
- network) you probably want to say N. Even if this support
- is enabled in the kernel build, LANMAN authentication will not be
- used automatically. At runtime LANMAN mounts are disabled but
- can be set to required (or optional) either in
- /proc/fs/cifs (see fs/cifs/README for more detail) or via an
- option on the mount command. This support is disabled by
- default in order to reduce the possibility of a downgrade
- attack.
-
- If unsure, say N.
-
-config CIFS_UPCALL
- bool "Kerberos/SPNEGO advanced session setup"
- depends on CIFS && KEYS
- help
- Enables an upcall mechanism for CIFS which accesses
- userspace helper utilities to provide SPNEGO packaged (RFC 4178)
- Kerberos tickets which are needed to mount to certain secure servers
- (for which more secure Kerberos authentication is required). If
- unsure, say N.
-
-config CIFS_XATTR
- bool "CIFS extended attributes"
- depends on CIFS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details). CIFS maps the name of
- extended attributes beginning with the user namespace prefix
- to SMB/CIFS EAs. EAs are stored on Windows servers without the
- user namespace prefix, but their names are seen by Linux cifs clients
- prefaced by the user namespace prefix. The system namespace
- (used by some filesystems to store ACLs) is not supported at
- this time.
-
- If unsure, say N.
-
-config CIFS_POSIX
- bool "CIFS POSIX Extensions"
- depends on CIFS_XATTR
- help
- Enabling this option will cause the cifs client to attempt to
- negotiate a newer dialect with servers, such as Samba 3.0.5
- or later, that optionally can handle more POSIX like (rather
- than Windows like) file behavior. It also enables
- support for POSIX ACLs (getfacl and setfacl) to servers
- (such as Samba 3.10 and later) which can negotiate
- CIFS POSIX ACL support. If unsure, say N.
-
-config CIFS_DEBUG2
- bool "Enable additional CIFS debugging routines"
- depends on CIFS
- help
- Enabling this option adds a few more debugging routines
- to the cifs code which slightly increases the size of
- the cifs module and can cause additional logging of debug
- messages in some error paths, slowing performance. This
- option can be turned off unless you are debugging
- cifs problems. If unsure, say N.
-
-config CIFS_EXPERIMENTAL
- bool "CIFS Experimental Features (EXPERIMENTAL)"
- depends on CIFS && EXPERIMENTAL
- help
- Enables cifs features under testing. These features are
- experimental and currently include DFS support and directory
- change notification ie fcntl(F_DNOTIFY), as well as the upcall
- mechanism which will be used for Kerberos session negotiation
- and uid remapping. Some of these features also may depend on
- setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental
- (which is disabled by default). See the file fs/cifs/README
- for more details. If unsure, say N.
-
-config CIFS_DFS_UPCALL
- bool "DFS feature support (EXPERIMENTAL)"
- depends on CIFS_EXPERIMENTAL
- depends on KEYS
- help
- Enables an upcall mechanism for CIFS which contacts userspace
- helper utilities to provide server name resolution (host names to
- IP addresses) which is needed for implicit mounts of DFS junction
- points. If unsure, say N.
-
-config NCP_FS
- tristate "NCP file system support (to mount NetWare volumes)"
- depends on IPX!=n || INET
- help
- NCP (NetWare Core Protocol) is a protocol that runs over IPX and is
- used by Novell NetWare clients to talk to file servers. It is to
- IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you
- to mount NetWare file server volumes and to access them just like
- any other Unix directory. For details, please read the file
- <file:Documentation/filesystems/ncpfs.txt> in the kernel source and
- the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>.
-
- You do not have to say Y here if you want your Linux box to act as a
- file *server* for Novell NetWare clients.
-
- General information about how to connect Linux, Windows machines and
- Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>.
-
- To compile this as a module, choose M here: the module will be called
- ncpfs. Say N unless you are connected to a Novell network.
-
+source "net/sunrpc/Kconfig"
+source "fs/smbfs/Kconfig"
+source "fs/cifs/Kconfig"
source "fs/ncpfs/Kconfig"
-
-config CODA_FS
- tristate "Coda file system support (advanced network fs)"
- depends on INET
- help
- Coda is an advanced network file system, similar to NFS in that it
- enables you to mount file systems of a remote server and access them
- with regular Unix commands as if they were sitting on your hard
- disk. Coda has several advantages over NFS: support for
- disconnected operation (e.g. for laptops), read/write server
- replication, security model for authentication and encryption,
- persistent client caches and write back caching.
-
- If you say Y here, your Linux box will be able to act as a Coda
- *client*. You will need user level code as well, both for the
- client and server. Servers are currently user level, i.e. they need
- no kernel support. Please read
- <file:Documentation/filesystems/coda.txt> and check out the Coda
- home page <http://www.coda.cs.cmu.edu/>.
-
- To compile the coda client support as a module, choose M here: the
- module will be called coda.
-
-config AFS_FS
- tristate "Andrew File System support (AFS) (EXPERIMENTAL)"
- depends on INET && EXPERIMENTAL
- select AF_RXRPC
- help
- If you say Y here, you will get an experimental Andrew File System
- driver. It currently only supports unsecured read-only AFS access.
-
- See <file:Documentation/filesystems/afs.txt> for more information.
-
- If unsure, say N.
-
-config AFS_DEBUG
- bool "AFS dynamic debugging"
- depends on AFS_FS
- help
- Say Y here to make runtime controllable debugging messages appear.
-
- See <file:Documentation/filesystems/afs.txt> for more information.
-
- If unsure, say N.
-
-config 9P_FS
- tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
- depends on INET && NET_9P && EXPERIMENTAL
- help
- If you say Y here, you will get experimental support for
- Plan 9 resource sharing via the 9P2000 protocol.
-
- See <http://v9fs.sf.net> for more information.
-
- If unsure, say N.
+source "fs/coda/Kconfig"
+source "fs/afs/Kconfig"
+source "fs/9p/Kconfig"
endif # NETWORK_FILESYSTEMS