dmi: Let dmi_walk() users pass private data

[safe/jmp/linux-2.6] / drivers / watchdog / Kconfig

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4fd3fa5..55f64af 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,13 @@ config SOFT_WATCHDOG
          To compile this driver as a module, choose M here: the
          module will be called softdog.
 
+config WM8350_WATCHDOG
+       tristate "WM8350 watchdog"
+       depends on MFD_WM8350
+       help
+         Support for the watchdog in the WM8350 AudioPlus PMIC.  When
+         the watchdog triggers the system will be reset.
+
 # ALPHA Architecture
 
 # ARM Architecture
@@ -180,10 +187,10 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
        tristate "OMAP Watchdog"
-       depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+       depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
        help
-         Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog.  Say 'Y' here to
-         enable the OMAP1610/OMAP1710 watchdog timer.
+         Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
+         here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
 
 config PNX4008_WATCHDOG
        tristate "PNX4008 Watchdog"
@@ -399,7 +406,7 @@ config ITCO_WDT
        ---help---
          Hardware driver for the intel TCO timer based watchdog devices.
          These drivers are included in the Intel 82801 I/O Controller
-         Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+         Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
          controller hub.
 
          The TCO (Total Cost of Ownership) timer is a watchdog timer
@@ -551,6 +558,18 @@ config CPU5_WDT
          To compile this driver as a module, choose M here: the
          module will be called cpu5wdt.
 
+config SMSC_SCH311X_WDT
+       tristate "SMSC SCH311X Watchdog Timer"
+       depends on X86
+       ---help---
+         This is the driver for the hardware watchdog timer on the
+         SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
+         (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
+         serial ports).
+
+         To compile this driver as a module, choose M here: the
+         module will be called sch311x_wdt.
+
 config SMSC37B787_WDT
        tristate "Winbond SMsC37B787 Watchdog Timer"
        depends on X86
@@ -751,6 +770,12 @@ config TXX9_WDT
 
 # POWERPC Architecture
 
+config GEF_WDT
+       tristate "GE Fanuc Watchdog Timer"
+       depends on GEF_SBC610
+       ---help---
+         Watchdog timer found in a number of GE Fanuc single board computers.
+
 config MPC5200_WDT
        tristate "MPC5200 Watchdog Timer"
        depends on PPC_MPC52xx
@@ -771,6 +796,14 @@ config MV64X60_WDT
        tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
        depends on MV64X60
 
+config PIKA_WDT
+       tristate "PIKA FPGA Watchdog"
+       depends on WARP
+       default y
+       help
+         This enables the watchdog in the PIKA FPGA. Currently used on
+         the Warp platform.
+
 config BOOKE_WDT
        bool "PowerPC Book-E Watchdog Timer"
        depends on BOOKE || 4xx
@@ -907,21 +940,6 @@ config WDT
          To compile this driver as a module, choose M here: the
          module will be called wdt.
 
-config WDT_501
-       bool "WDT501 features"
-       depends on WDT
-       help
-         Saying Y here and creating a character special file /dev/temperature
-         with major number 10 and minor number 131 ("man mknod") will give
-         you a thermometer inside your computer: reading from
-         /dev/temperature yields one byte, the temperature in degrees
-         Fahrenheit. This works only if you have a WDT501P watchdog board
-         installed.
-
-         If you want to enable the Fan Tachometer on the WDT501P, then you
-         can do this via the tachometer parameter. Only do this if you have a
-         fan tachometer actually set up.
-
 #
 # PCI-based Watchdog Cards
 #