[WATCHDOG] Pika Warp appliance watchdog timer

[safe/jmp/linux-2.6] / drivers / watchdog / Kconfig

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index a8e80f2..3efa12f 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,13 @@ config SOFT_WATCHDOG
          To compile this driver as a module, choose M here: the
          module will be called softdog.
 
+config WM8350_WATCHDOG
+       tristate "WM8350 watchdog"
+       depends on MFD_WM8350
+       help
+         Support for the watchdog in the WM8350 AudioPlus PMIC.  When
+         the watchdog triggers the system will be reset.
+
 # ALPHA Architecture
 
 # ARM Architecture
@@ -66,6 +73,13 @@ config AT91RM9200_WATCHDOG
          Watchdog timer embedded into AT91RM9200 chips. This will reboot your
          system when the timeout is reached.
 
+config AT91SAM9X_WATCHDOG
+       tristate "AT91SAM9X / AT91CAP9 watchdog"
+       depends on ARCH_AT91 && !ARCH_AT91RM9200
+       help
+         Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
+         reboot your system when the timeout is reached.
+
 config 21285_WATCHDOG
        tristate "DC21285 watchdog"
        depends on FOOTBRIDGE
@@ -217,6 +231,15 @@ config DAVINCI_WATCHDOG
          NOTE: once enabled, this timer cannot be disabled.
          Say N if you are unsure.
 
+config ORION5X_WATCHDOG
+       tristate "Orion5x watchdog"
+       depends on ARCH_ORION5X
+       help
+         Say Y here if to include support for the watchdog timer
+         in the Orion5x ARM SoCs.
+         To compile this driver as a module, choose M here: the
+         module will be called orion5x_wdt.
+
 # ARM26 Architecture
 
 # AVR32 Architecture
@@ -416,6 +439,18 @@ config IT8712F_WDT
          To compile this driver as a module, choose M here: the
          module will be called it8712f_wdt.
 
+config IT87_WDT
+       tristate "IT87 Watchdog Timer"
+       depends on X86 && EXPERIMENTAL
+       ---help---
+         This is the driver for the hardware watchdog on the ITE IT8716,
+         IT8718, IT8726, IT8712(Version J,K) Super I/O chips. This watchdog
+         simply watches your kernel to make sure it doesn't freeze, and if
+         it does, it reboots your computer after a certain amount of time.
+
+         To compile this driver as a module, choose M here: the module will
+         be called it87_wdt.
+
 config HP_WATCHDOG
        tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
        depends on X86
@@ -465,6 +500,16 @@ config PC87413_WDT
 
          Most people will say N.
 
+config RDC321X_WDT
+       tristate "RDC R-321x SoC watchdog"
+       depends on X86_RDC321X
+       help
+         This is the driver for the built in hardware watchdog
+         in the RDC R-321x SoC.
+
+         To compile this driver as a module, choose M here: the
+         module will be called rdc321x_wdt.
+
 config 60XX_WDT
        tristate "SBC-60XX Watchdog Timer"
        depends on X86
@@ -513,6 +558,18 @@ config CPU5_WDT
          To compile this driver as a module, choose M here: the
          module will be called cpu5wdt.
 
+config SMSC_SCH311X_WDT
+       tristate "SMSC SCH311X Watchdog Timer"
+       depends on X86
+       ---help---
+         This is the driver for the hardware watchdog timer on the
+         SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
+         (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
+         serial ports).
+
+         To compile this driver as a module, choose M here: the
+         module will be called sch311x_wdt.
+
 config SMSC37B787_WDT
        tristate "Winbond SMsC37B787 Watchdog Timer"
        depends on X86
@@ -563,6 +620,21 @@ config W83697HF_WDT
 
          Most people will say N.
 
+config W83697UG_WDT
+       tristate "W83697UG/W83697UF Watchdog Timer"
+       depends on X86
+       ---help---
+         This is the driver for the hardware watchdog on the W83697UG/UF
+         chipset as used in MSI Fuzzy CX700 VIA motherboards (and likely others).
+         This watchdog simply watches your kernel to make sure it doesn't
+         freeze, and if it does, it reboots your computer after a certain
+         amount of time.
+
+         To compile this driver as a module, choose M here: the
+         module will be called w83697ug_wdt.
+
+         Most people will say N.
+
 config W83877F_WDT
        tristate "W83877F (EMACS) Watchdog Timer"
        depends on X86
@@ -633,6 +705,16 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config RC32434_WDT
+       tristate "IDT RC32434 SoC Watchdog Timer"
+       depends on MIKROTIK_RB532
+       help
+         Hardware driver for the IDT RC32434 SoC built-in
+         watchdog timer.
+
+         To compile this driver as a module, choose M here: the
+         module will be called rc32434_wdt.
+
 config INDYDOG
        tristate "Indy/I2 Hardware Watchdog"
        depends on SGI_HAS_INDYDOG
@@ -688,6 +770,12 @@ config TXX9_WDT
 
 # POWERPC Architecture
 
+config GEF_WDT
+       tristate "GE Fanuc Watchdog Timer"
+       depends on GEF_SBC610
+       ---help---
+         Watchdog timer found in a number of GE Fanuc single board computers.
+
 config MPC5200_WDT
        tristate "MPC5200 Watchdog Timer"
        depends on PPC_MPC52xx
@@ -708,6 +796,14 @@ config MV64X60_WDT
        tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
        depends on MV64X60
 
+config PIKA_WDT
+       tristate "PIKA FPGA Watchdog"
+       depends on WARP
+       default y
+       help
+         This enables the watchdog in the PIKA FPGA. Currently used on
+         the Warp platform.
+
 config BOOKE_WDT
        bool "PowerPC Book-E Watchdog Timer"
        depends on BOOKE || 4xx