viafb: add support for the VX855 chipset

[safe/jmp/linux-2.6] / drivers / video / via / viamode.c

diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index 16a8a97..b74f8a6 100644 (file)
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -312,6 +312,60 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
 {VIACR, CR9B, 0xFF, 0x00}
 };
 
+struct io_reg VX855_ModeXregs[] = {
+{VIASR, SR10, 0xFF, 0x01},
+{VIASR, SR15, 0x02, 0x02},
+{VIASR, SR16, 0xBF, 0x08},
+{VIASR, SR17, 0xFF, 0x1F},
+{VIASR, SR18, 0xFF, 0x4E},
+{VIASR, SR1A, 0xFB, 0x08},
+{VIASR, SR1B, 0xFF, 0xF0},
+{VIASR, SR1E, 0x07, 0x01},
+{VIASR, SR2A, 0xF0, 0x00},
+{VIASR, SR58, 0xFF, 0x00},
+{VIASR, SR59, 0xFF, 0x00},
+{VIASR, SR2D, 0xFF, 0xFF},     /* VCK and LCK PLL power on.           */
+{VIACR, CR09, 0xFF, 0x00},     /* Initial CR09=0*/
+{VIACR, CR11, 0x8F, 0x00},     /* IGA1 initial  Vertical end       */
+{VIACR, CR17, 0x7F, 0x00},     /* IGA1 CRT Mode control init   */
+{VIACR, CR0A, 0xFF, 0x1E},     /* Cursor Start                        */
+{VIACR, CR0B, 0xFF, 0x00},     /* Cursor End                          */
+{VIACR, CR0E, 0xFF, 0x00},     /* Cursor Location High                */
+{VIACR, CR0F, 0xFF, 0x00},     /* Cursor Localtion Low                */
+{VIACR, CR32, 0xFF, 0x00},
+{VIACR, CR33, 0x7F, 0x00},
+{VIACR, CR35, 0xFF, 0x00},
+{VIACR, CR36, 0x08, 0x00},
+{VIACR, CR69, 0xFF, 0x00},
+{VIACR, CR6A, 0xFD, 0x60},
+{VIACR, CR6B, 0xFF, 0x00},
+{VIACR, CR6C, 0xFF, 0x00},
+{VIACR, CR7A, 0xFF, 0x01},          /* LCD Scaling Parameter 1             */
+{VIACR, CR7B, 0xFF, 0x02},          /* LCD Scaling Parameter 2             */
+{VIACR, CR7C, 0xFF, 0x03},          /* LCD Scaling Parameter 3             */
+{VIACR, CR7D, 0xFF, 0x04},          /* LCD Scaling Parameter 4             */
+{VIACR, CR7E, 0xFF, 0x07},          /* LCD Scaling Parameter 5             */
+{VIACR, CR7F, 0xFF, 0x0A},          /* LCD Scaling Parameter 6             */
+{VIACR, CR80, 0xFF, 0x0D},          /* LCD Scaling Parameter 7             */
+{VIACR, CR81, 0xFF, 0x13},          /* LCD Scaling Parameter 8             */
+{VIACR, CR82, 0xFF, 0x16},          /* LCD Scaling Parameter 9             */
+{VIACR, CR83, 0xFF, 0x19},          /* LCD Scaling Parameter 10            */
+{VIACR, CR84, 0xFF, 0x1C},          /* LCD Scaling Parameter 11            */
+{VIACR, CR85, 0xFF, 0x1D},          /* LCD Scaling Parameter 12            */
+{VIACR, CR86, 0xFF, 0x1E},          /* LCD Scaling Parameter 13            */
+{VIACR, CR87, 0xFF, 0x1F},          /* LCD Scaling Parameter 14            */
+{VIACR, CR88, 0xFF, 0x40},          /* LCD Panel Type                      */
+{VIACR, CR89, 0xFF, 0x00},          /* LCD Timing Control 0                */
+{VIACR, CR8A, 0xFF, 0x88},          /* LCD Timing Control 1                */
+{VIACR, CRD4, 0xFF, 0x81},          /* Second power sequence control       */
+{VIACR, CR91, 0xFF, 0x80},          /* 24/12 bit LVDS Data off             */
+{VIACR, CR96, 0xFF, 0x00},
+{VIACR, CR97, 0xFF, 0x00},
+{VIACR, CR99, 0xFF, 0x00},
+{VIACR, CR9B, 0xFF, 0x00},
+{VIACR, CRD2, 0xFF, 0xFF}           /* TMDS/LVDS control register.         */
+};
+
 /* Video Mode Table */
 /* Common Setting for Video Mode */
 struct io_reg CLE266_ModeXregs[] = { {VIASR, SR1E, 0xF0, 0x00},
@@ -1012,6 +1066,7 @@ int NUM_TOTAL_CN400_ModeXregs = ARRAY_SIZE(CN400_ModeXregs);
 int NUM_TOTAL_CN700_ModeXregs = ARRAY_SIZE(CN700_ModeXregs);
 int NUM_TOTAL_KM400_ModeXregs = ARRAY_SIZE(KM400_ModeXregs);
 int NUM_TOTAL_CX700_ModeXregs = ARRAY_SIZE(CX700_ModeXregs);
+int NUM_TOTAL_VX855_ModeXregs = ARRAY_SIZE(VX855_ModeXregs);
 int NUM_TOTAL_CLE266_ModeXregs = ARRAY_SIZE(CLE266_ModeXregs);
 int NUM_TOTAL_PATCH_MODE = ARRAY_SIZE(res_patch_table);
 int NUM_TOTAL_MODETABLE = ARRAY_SIZE(CLE266Modes);