* Low level Frame buffer driver for HP workstations with
* STI (standard text interface) video firmware.
*
- * Copyright (C) 2001-2004 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2001-2006 Helge Deller <deller@gmx.de>
* Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
*
* Based on:
#undef DEBUG_STIFB_REGS /* debug sti register accesses */
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/pci.h>
#include <asm/grfioctl.h> /* for HP-UX compatibility */
#include <asm/uaccess.h>
#define NGLEDEVDEPROM_CRT_REGION 1
+#define NR_PALETTE 256
+
typedef struct {
__s32 video_config_reg;
__s32 misc_video_start;
ngle_rom_t ngle_rom;
struct sti_struct *sti;
int deviceSpecificConfig;
- u32 pseudo_palette[256];
+ u32 pseudo_palette[16];
};
static int __initdata stifb_bpp_pref[MAX_STI_ROMS];
#define IS_888_DEVICE(fb) \
(!(IS_24_DEVICE(fb)))
-#define GET_FIFO_SLOTS(fb, cnt, numslots) \
-{ while (cnt < numslots) \
+#define GET_FIFO_SLOTS(fb, cnt, numslots) \
+{ while (cnt < numslots) \
cnt = READ_WORD(fb, REG_34); \
- cnt -= numslots; \
+ cnt -= numslots; \
}
#define IndexedDcd 0 /* Pixel data is indexed (pseudo) color */
SETUP_HW(fb);
WRITE_BYTE(1, fb, REG_16b1);
- fb_memset(fb->info.fix.smem_start, 0xff,
+ fb_memset((void*)fb->info.fix.smem_start, 0xff,
fb->info.var.yres*fb->info.fix.line_length);
CRX24_SET_OVLY_MASK(fb);
/* ------------------- driver specific functions --------------------------- */
-#define TMPBUFLEN 2048
-
-static ssize_t
-stifb_read(struct file *file, char *buf, size_t count, loff_t *ppos)
-{
- unsigned long p = *ppos;
- struct inode *inode = file->f_dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
- char tmpbuf[TMPBUFLEN];
-
- if (!info || ! info->screen_base)
- return -ENODEV;
-
- if (p >= info->fix.smem_len)
- return 0;
- if (count >= info->fix.smem_len)
- count = info->fix.smem_len;
- if (count + p > info->fix.smem_len)
- count = info->fix.smem_len - p;
- if (count > sizeof(tmpbuf))
- count = sizeof(tmpbuf);
- if (count) {
- char *base_addr;
-
- base_addr = info->screen_base;
- memcpy_fromio(&tmpbuf, base_addr+p, count);
- count -= copy_to_user(buf, &tmpbuf, count);
- if (!count)
- return -EFAULT;
- *ppos += count;
- }
- return count;
-}
-
-static ssize_t
-stifb_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
-{
- struct inode *inode = file->f_dentry->d_inode;
- int fbidx = iminor(inode);
- struct fb_info *info = registered_fb[fbidx];
- unsigned long p = *ppos;
- size_t c;
- int err;
- char tmpbuf[TMPBUFLEN];
-
- if (!info || !info->screen_base)
- return -ENODEV;
-
- if (p > info->fix.smem_len)
- return -ENOSPC;
- if (count >= info->fix.smem_len)
- count = info->fix.smem_len;
- err = 0;
- if (count + p > info->fix.smem_len) {
- count = info->fix.smem_len - p;
- err = -ENOSPC;
- }
-
- p += (unsigned long)info->screen_base;
- c = count;
- while (c) {
- int len = c > sizeof(tmpbuf) ? sizeof(tmpbuf) : c;
- err = -EFAULT;
- if (copy_from_user(&tmpbuf, buf, len))
- break;
- memcpy_toio(p, &tmpbuf, len);
- c -= len;
- p += len;
- buf += len;
- *ppos += len;
- }
- if (count-c)
- return (count-c);
- return err;
-}
-
static int
stifb_setcolreg(u_int regno, u_int red, u_int green,
u_int blue, u_int transp, struct fb_info *info)
struct stifb_info *fb = (struct stifb_info *) info;
u32 color;
- if (regno >= 256) /* no. of hw registers */
+ if (regno >= NR_PALETTE)
return 1;
red >>= 8;
DEBUG_OFF();
START_IMAGE_COLORMAP_ACCESS(fb);
-
- if (fb->info.var.grayscale) {
+
+ if (unlikely(fb->info.var.grayscale)) {
/* gray = 0.30*R + 0.59*G + 0.11*B */
color = ((red * 77) +
(green * 151) +
(blue));
}
- if (info->var.bits_per_pixel == 32) {
- ((u32 *)(info->pseudo_palette))[regno] =
- (red << info->var.red.offset) |
- (green << info->var.green.offset) |
- (blue << info->var.blue.offset);
- } else {
- ((u32 *)(info->pseudo_palette))[regno] = regno;
+ if (fb->info.fix.visual == FB_VISUAL_DIRECTCOLOR) {
+ struct fb_var_screeninfo *var = &fb->info.var;
+ if (regno < 16)
+ ((u32 *)fb->info.pseudo_palette)[regno] =
+ regno << var->red.offset |
+ regno << var->green.offset |
+ regno << var->blue.offset;
}
WRITE_IMAGE_COLOR(fb, regno, color);
-
+
if (fb->id == S9000_ID_HCRX) {
NgleLutBltCtl lutBltCtl;
case S9000_ID_HCRX:
HYPER_ENABLE_DISABLE_DISPLAY(fb, enable);
break;
- case S9000_ID_A1659A:; /* fall through */
- case S9000_ID_TIMBER:;
- case CRX24_OVERLAY_PLANES:;
+ case S9000_ID_A1659A: /* fall through */
+ case S9000_ID_TIMBER:
+ case CRX24_OVERLAY_PLANES:
default:
ENABLE_DISABLE_DISPLAY(fb, enable);
break;
static struct fb_ops stifb_ops = {
.owner = THIS_MODULE,
- .fb_read = stifb_read,
- .fb_write = stifb_write,
.fb_setcolreg = stifb_setcolreg,
.fb_blank = stifb_blank,
.fb_fillrect = cfb_fillrect,
char *dev_name;
int bpp, xres, yres;
- fb = kmalloc(sizeof(*fb), GFP_ATOMIC);
+ fb = kzalloc(sizeof(*fb), GFP_ATOMIC);
if (!fb) {
printk(KERN_ERR "stifb: Could not allocate stifb structure\n");
return -ENODEV;
info = &fb->info;
/* set struct to a known state */
- memset(fb, 0, sizeof(*fb));
fix = &info->fix;
var = &info->var;
/* only supported cards are allowed */
switch (fb->id) {
case CRT_ID_VISUALIZE_EG:
- /* look for a double buffering device like e.g. the
- "INTERNAL_EG_DX1024" in the RDI precisionbook laptop
- which won't work. The same device in non-double
- buffering mode returns "INTERNAL_EG_X1024". */
- if (strstr(sti->outptr.dev_name, "EG_DX")) {
- printk(KERN_WARNING
- "stifb: ignoring '%s'. Disable double buffering in IPL menu.\n",
+ /* Visualize cards can run either in "double buffer" or
+ "standard" mode. Depending on the mode, the card reports
+ a different device name, e.g. "INTERNAL_EG_DX1024" in double
+ buffer mode and "INTERNAL_EG_X1024" in standard mode.
+ Since this driver only supports standard mode, we check
+ if the device name contains the string "DX" and tell the
+ user how to reconfigure the card. */
+ if (strstr(sti->outptr.dev_name, "DX")) {
+ printk(KERN_WARNING "WARNING: stifb framebuffer driver does not "
+ "support '%s' in double-buffer mode.\n"
+ KERN_WARNING "WARNING: Please disable the double-buffer mode "
+ "in IPL menu (the PARISC-BIOS).\n",
sti->outptr.dev_name);
goto out_err0;
}
case S9000_ID_TOMCAT: /* Dual CRX, behaves else like a CRX */
/* FIXME: TomCat supports two heads:
* fb.iobase = REGION_BASE(fb_info,3);
- * fb.screen_base = (void*) REGION_BASE(fb_info,2);
+ * fb.screen_base = ioremap_nocache(REGION_BASE(fb_info,2),xxx);
* for now we only support the left one ! */
xres = fb->ngle_rom.x_size_visible;
yres = fb->ngle_rom.y_size_visible;
break;
case 32:
fix->type = FB_TYPE_PACKED_PIXELS;
- fix->visual = FB_VISUAL_TRUECOLOR;
+ fix->visual = FB_VISUAL_DIRECTCOLOR;
var->red.length = var->green.length = var->blue.length = var->transp.length = 8;
var->blue.offset = 0;
var->green.offset = 8;
strcpy(fix->id, "stifb");
info->fbops = &stifb_ops;
- info->screen_base = (void*) REGION_BASE(fb,1);
+ info->screen_base = ioremap_nocache(REGION_BASE(fb,1), fix->smem_len);
+ info->screen_size = fix->smem_len;
info->flags = FBINFO_DEFAULT;
info->pseudo_palette = &fb->pseudo_palette;
/* This has to been done !!! */
- fb_alloc_cmap(&info->cmap, 256, 0);
+ fb_alloc_cmap(&info->cmap, NR_PALETTE, 0);
stifb_init_display(fb);
if (!request_mem_region(fix->smem_start, fix->smem_len, "stifb fb")) {
out_err2:
release_mem_region(fix->smem_start, fix->smem_len);
out_err1:
+ iounmap(info->screen_base);
fb_dealloc_cmap(&info->cmap);
out_err0:
kfree(fb);
unregister_framebuffer(sti->info);
release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
release_mem_region(info->fix.smem_start, info->fix.smem_len);
+ if (info->screen_base)
+ iounmap(info->screen_base);
fb_dealloc_cmap(&info->cmap);
kfree(info);
}
int i;
if (!options || !*options)
- return 0;
+ return 1;
if (strncmp(options, "off", 3) == 0) {
stifb_disabled = 1;
stifb_bpp_pref[i] = simple_strtoul(options, &options, 10);
}
}
- return 0;
+ return 1;
}
__setup("stifb=", stifb_setup);
MODULE_AUTHOR("Helge Deller <deller@gmx.de>, Thomas Bogendoerfer <tsbogend@alpha.franken.de>");
MODULE_DESCRIPTION("Framebuffer driver for HP's NGLE series graphics cards in HP PARISC machines");
MODULE_LICENSE("GPL v2");
-
-MODULE_PARM(bpp, "i");
-MODULE_PARM_DESC(mem, "Bits per pixel (default: 8)");
-
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff