* - FrameBuffer memory is now allocated at run-time when the
* driver is initialized.
*
- * 2000/04/10: Nicolas Pitre <nico@cam.org>
+ * 2000/04/10: Nicolas Pitre <nico@fluxnic.net>
* - Big cleanup for dynamic selection of machine type at run time.
*
* 2000/07/19: Jamey Hicks <jamey@crl.dec.com>
* - convert dma address types to dma_addr_t
* - remove unused 'montype' stuff
* - remove redundant zero inits of init_var after the initial
- * memzero.
+ * memset.
* - remove allow_modeset (acornfb idea does not belong here)
*
* 2001/05/28: <rmk@arm.linux.org.uk>
* - Add patch 681/1 and clean up stork definitions.
*/
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
+#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/uaccess.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/shannon.h>
+#include <mach/assabet.h>
+#include <mach/shannon.h>
/*
* debugging?
extern void (*sa1100fb_backlight_power)(int on);
extern void (*sa1100fb_lcd_power)(int on);
-/*
- * IMHO this looks wrong. In 8BPP, length should be 8.
- */
-static struct sa1100fb_rgb rgb_8 = {
+static struct sa1100fb_rgb rgb_4 = {
.red = { .offset = 0, .length = 4, },
.green = { .offset = 0, .length = 4, },
.blue = { .offset = 0, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
+static struct sa1100fb_rgb rgb_8 = {
+ .red = { .offset = 0, .length = 8, },
+ .green = { .offset = 0, .length = 8, },
+ .blue = { .offset = 0, .length = 8, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
static struct sa1100fb_rgb def_rgb_16 = {
.red = { .offset = 11, .length = 5, },
.green = { .offset = 5, .length = 6, },
#endif
#endif
-#ifdef CONFIG_SA1100_H3800
-static struct sa1100fb_mach_info h3800_info __initdata = {
- .pixclock = 174757, .bpp = 16,
- .xres = 320, .yres = 240,
-
- .hsync_len = 3, .vsync_len = 3,
- .left_margin = 12, .upper_margin = 10,
- .right_margin = 17, .lower_margin = 1,
-
- .cmap_static = 1,
-
- .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
- .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
-};
-#endif
-
#ifdef CONFIG_SA1100_H3600
static struct sa1100fb_mach_info h3600_info __initdata = {
.pixclock = 174757, .bpp = 16,
fbi->rgb[RGB_16] = &h3600_rgb_16;
}
#endif
-#ifdef CONFIG_SA1100_H3800
- if (machine_is_h3800()) {
- inf = &h3800_info;
- }
-#endif
#ifdef CONFIG_SA1100_COLLIE
if (machine_is_collie()) {
inf = &collie_info;
DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
case 4:
- rgbidx = RGB_8;
+ rgbidx = RGB_4;
break;
case 8:
rgbidx = RGB_8;
return 0;
}
-static int sa1100fb_mmap(struct fb_info *info, struct file *file,
+static int sa1100fb_mmap(struct fb_info *info,
struct vm_area_struct *vma)
{
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_blank = sa1100fb_blank,
- .fb_cursor = soft_cursor,
.fb_mmap = sa1100fb_mmap,
};
/*
* sa1100fb_handle_irq: Handle 'LCD DONE' interrupts.
*/
-static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
{
struct sa1100fb_info *fbi = dev_id;
unsigned int lcsr = LCSR;
{
u_int old_state;
- down(&fbi->ctrlr_sem);
+ mutex_lock(&fbi->ctrlr_lock);
old_state = fbi->state;
}
break;
}
- up(&fbi->ctrlr_sem);
+ mutex_unlock(&fbi->ctrlr_lock);
}
/*
* Our LCD controller task (which is called when we blank or unblank)
* via keventd.
*/
-static void sa1100fb_task(void *dummy)
+static void sa1100fb_task(struct work_struct *w)
{
- struct sa1100fb_info *fbi = dummy;
+ struct sa1100fb_info *fbi = container_of(w, struct sa1100fb_info, task);
u_int state = xchg(&fbi->task_state, -1);
set_ctrlr_state(fbi, state);
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int sa1100fb_suspend(struct device *dev, pm_message_t state)
+static int sa1100fb_suspend(struct platform_device *dev, pm_message_t state)
{
- struct sa1100fb_info *fbi = dev_get_drvdata(dev);
+ struct sa1100fb_info *fbi = platform_get_drvdata(dev);
set_ctrlr_state(fbi, C_DISABLE_PM);
return 0;
}
-static int sa1100fb_resume(struct device *dev)
+static int sa1100fb_resume(struct platform_device *dev)
{
- struct sa1100fb_info *fbi = dev_get_drvdata(dev);
+ struct sa1100fb_info *fbi = platform_get_drvdata(dev);
set_ctrlr_state(fbi, C_ENABLE_PM);
return 0;
fbi->fb.monspecs = monspecs;
fbi->fb.pseudo_palette = (fbi + 1);
+ fbi->rgb[RGB_4] = &rgb_4;
fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16;
fbi->max_bpp / 8;
init_waitqueue_head(&fbi->ctrlr_wait);
- INIT_WORK(&fbi->task, sa1100fb_task, fbi);
- init_MUTEX(&fbi->ctrlr_sem);
+ INIT_WORK(&fbi->task, sa1100fb_task);
+ mutex_init(&fbi->ctrlr_lock);
return fbi;
}
-static int __init sa1100fb_probe(struct device *dev)
+static int __init sa1100fb_probe(struct platform_device *pdev)
{
struct sa1100fb_info *fbi;
- int ret;
+ int ret, irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -EINVAL;
if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
return -EBUSY;
- fbi = sa1100fb_init_fbinfo(dev);
+ fbi = sa1100fb_init_fbinfo(&pdev->dev);
ret = -ENOMEM;
if (!fbi)
goto failed;
if (ret)
goto failed;
- ret = request_irq(IRQ_LCD, sa1100fb_handle_irq, SA_INTERRUPT,
+ ret = request_irq(irq, sa1100fb_handle_irq, IRQF_DISABLED,
"LCD", fbi);
if (ret) {
printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
*/
sa1100fb_check_var(&fbi->fb.var, &fbi->fb);
- dev_set_drvdata(dev, fbi);
+ platform_set_drvdata(pdev, fbi);
ret = register_framebuffer(&fbi->fb);
if (ret < 0)
- goto failed;
+ goto err_free_irq;
#ifdef CONFIG_CPU_FREQ
fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
/* This driver cannot be unloaded at the moment */
return 0;
-failed:
- dev_set_drvdata(dev, NULL);
+ err_free_irq:
+ free_irq(irq, fbi);
+ failed:
+ platform_set_drvdata(pdev, NULL);
kfree(fbi);
release_mem_region(0xb0100000, 0x10000);
return ret;
}
-static struct device_driver sa1100fb_driver = {
- .name = "sa11x0-fb",
- .bus = &platform_bus_type,
+static struct platform_driver sa1100fb_driver = {
.probe = sa1100fb_probe,
.suspend = sa1100fb_suspend,
.resume = sa1100fb_resume,
+ .driver = {
+ .name = "sa11x0-fb",
+ },
};
int __init sa1100fb_init(void)
if (fb_get_options("sa1100fb", NULL))
return -ENODEV;
- return driver_register(&sa1100fb_driver);
+ return platform_driver_register(&sa1100fb_driver);
}
int __init sa1100fb_setup(char *options)