V4L/DVB (9711): gspca: Let gspca handle the webcams 045e:00f5 & 00f7 instead of sn9c102.

[safe/jmp/linux-2.6] / drivers / video / pxafb.c

diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 3169ea4..cc59c52 100644 (file)
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -45,14 +45,14 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/bitfield.h>
+#include <mach/pxafb.h>
 
 /*
  * Complain if VAR is out of range.
@@ -804,6 +804,9 @@ static int pxafb_smart_thread(void *arg)
 
 static int pxafb_smart_init(struct pxafb_info *fbi)
 {
+       if (!(fbi->lccr0 | LCCR0_LCDT))
+               return 0;
+
        fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi,
                                        "lcd_refresh");
        if (IS_ERR(fbi->smart_thread)) {
@@ -1031,7 +1034,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi)
        pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
        pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
        pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
-       pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+       if ((lccr0 & LCCR0_PAS) == 0)
+               pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)
@@ -1370,7 +1375,7 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
        fbi->cmap_inverse       = inf->cmap_inverse;
        fbi->cmap_static        = inf->cmap_static;
 
-       switch (lcd_conn & 0xf) {
+       switch (lcd_conn & LCD_TYPE_MASK) {
        case LCD_TYPE_MONO_STN:
                fbi->lccr0 = LCCR0_CMS;
                break;
@@ -1400,6 +1405,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi,
        if (lcd_conn == LCD_MONO_STN_8BPP)
                fbi->lccr0 |= LCCR0_DPD;
 
+       fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
        fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
        fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
        fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL)  ? LCCR3_PCP : 0;
@@ -1673,53 +1680,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
 #define pxafb_setup_options()          (0)
 #endif
 
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
-       struct pxafb_info *fbi;
-       struct pxafb_mach_info *inf;
-       struct resource *r;
-       int irq, ret;
-
-       dev_dbg(&dev->dev, "pxafb_probe\n");
-
-       inf = dev->dev.platform_data;
-       ret = -ENOMEM;
-       fbi = NULL;
-       if (!inf)
-               goto failed;
-
-       ret = pxafb_parse_options(&dev->dev, g_options);
-       if (ret < 0)
-               goto failed;
-
 #ifdef DEBUG_VAR
-       /* Check for various illegal bit-combinations. Currently only
-        * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+                                         struct pxafb_mach_info *inf)
+{
+       if (inf->lcd_conn)
+               return;
 
        if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
-               dev_warn(&dev->dev, "machine LCCR0 setting contains "
+               dev_warn(dev, "machine LCCR0 setting contains "
                                "illegal bits: %08x\n",
                        inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
        if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
-               dev_warn(&dev->dev, "machine LCCR3 setting contains "
+               dev_warn(dev, "machine LCCR3 setting contains "
                                "illegal bits: %08x\n",
                        inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
        if (inf->lccr0 & LCCR0_DPD &&
            ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
             (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
             (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
-               dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+               dev_warn(dev, "Double Pixel Data (DPD) mode is "
                                "only valid in passive mono"
                                " single panel mode\n");
        if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
            (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
-               dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+               dev_warn(dev, "Dual panel only valid in passive mode\n");
        if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
             (inf->modes->upper_margin || inf->modes->lower_margin))
-               dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+               dev_warn(dev, "Upper and lower margins must be 0 in "
                                "passive mode\n");
+}
+#else
+#define pxafb_check_options(...)       do {} while (0)
 #endif
 
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+       struct pxafb_info *fbi;
+       struct pxafb_mach_info *inf;
+       struct resource *r;
+       int irq, ret;
+
+       dev_dbg(&dev->dev, "pxafb_probe\n");
+
+       inf = dev->dev.platform_data;
+       ret = -ENOMEM;
+       fbi = NULL;
+       if (!inf)
+               goto failed;
+
+       ret = pxafb_parse_options(&dev->dev, g_options);
+       if (ret < 0)
+               goto failed;
+
+       pxafb_check_options(&dev->dev, inf);
+
        dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
                        inf->modes->xres,
                        inf->modes->yres,