#include <linux/fb.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
-#include <asm/geode.h>
+#include <linux/cs5535.h>
#include "lxfb.h"
{ 0x00014284, 19688 },
{ 0x00011104, 20400 },
{ 0x00016363, 23625 },
- { 0x00015303, 24380 },
{ 0x000031AC, 24923 },
{ 0x0000215D, 25175 },
{ 0x00001087, 27000 },
{ 0x0000216C, 28322 },
{ 0x0000218D, 28560 },
- { 0x00010041, 29913 },
{ 0x000010C9, 31200 },
{ 0x00003147, 31500 },
- { 0x000141A1, 32400 },
{ 0x000010A7, 33032 },
- { 0x00012182, 33375 },
- { 0x000141B1, 33750 },
{ 0x00002159, 35112 },
{ 0x00004249, 35500 },
{ 0x00000057, 36000 },
- { 0x000141E1, 37125 },
{ 0x0000219A, 37889 },
{ 0x00002158, 39168 },
{ 0x00000045, 40000 },
- { 0x000131A1, 40500 },
- { 0x00010061, 42301 },
{ 0x00000089, 43163 },
- { 0x00012151, 43875 },
{ 0x000010E7, 44900 },
{ 0x00002136, 45720 },
- { 0x000152E1, 47250 },
- { 0x00010071, 48000 },
{ 0x00003207, 49500 },
{ 0x00002187, 50000 },
- { 0x00014291, 50625 },
- { 0x00011101, 51188 },
- { 0x00017481, 54563 },
{ 0x00004286, 56250 },
- { 0x00014170, 57375 },
- { 0x00016210, 58500 },
{ 0x000010E5, 60065 },
- { 0x00013140, 62796 },
{ 0x00004214, 65000 },
- { 0x00016250, 65250 },
{ 0x00001105, 68179 },
- { 0x000141C0, 69600 },
- { 0x00015220, 70160 },
- { 0x00010050, 72000 },
{ 0x000031E4, 74250 },
{ 0x00003183, 75000 },
{ 0x00004284, 78750 },
- { 0x00012130, 80052 },
{ 0x00001104, 81600 },
{ 0x00006363, 94500 },
{ 0x00005303, 97520 },
rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
- if ((dotpll_lo & GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
+ if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
return;
dotpll_hi = pllval;
- dotpll_lo &= ~(GLCP_DOTPLL_BYPASS | GLCP_DOTPLL_HALFPIX);
- dotpll_lo |= GLCP_DOTPLL_RESET;
+ dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX);
+ dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET;
wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
for (i = 0; i < 1000; i++) {
rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
- if (dotpll_lo & GLCP_DOTPLL_LOCK)
+ if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK)
break;
}
/* Clear the reset bit */
- dotpll_lo &= ~GLCP_DOTPLL_RESET;
+ dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET;
wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
}
val = read_dc(par, DC_CLR_KEY);
write_dc(par, DC_CLR_KEY, val & ~DC_CLR_KEY_CLR_KEY_EN);
- /* We don't actually blank the panel, due to the long latency
- involved with bringing it back */
+ /* turn off the panel */
+ write_fp(par, FP_PM, read_fp(par, FP_PM) & ~FP_PM_P);
val = read_vp(par, VP_MISC) | VP_MISC_DACPWRDN;
write_vp(par, VP_MISC, val);
u32 msrlo, msrhi;
write_fp(par, FP_PT1, 0);
- write_fp(par, FP_PT2, FP_PT2_SCRC);
+ temp = FP_PT2_SCRC;
+
+ if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ temp |= FP_PT2_HSP;
+
+ if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ temp |= FP_PT2_VSP;
+
+ write_fp(par, FP_PT2, temp);
write_fp(par, FP_DFC, FP_DFC_BC);
- msrlo = DF_DEFAULT_TFT_PAD_SEL_LOW;
- msrhi = DF_DEFAULT_TFT_PAD_SEL_HIGH;
+ msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW;
+ msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH;
wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
}
}
/* Turn the panel on (if it isn't already) */
-
- if (par->output & OUTPUT_PANEL) {
- temp = read_fp(par, FP_PM);
-
- if (!(temp & 0x09))
- write_fp(par, FP_PM, temp | FP_PM_P);
- }
+ if (par->output & OUTPUT_PANEL)
+ write_fp(par, FP_PM, read_fp(par, FP_PM) | FP_PM_P);
}
unsigned int lx_framebuffer_size(void)
{
unsigned int val;
+ if (!cs5535_has_vsa2()) {
+ uint32_t hi, lo;
+
+ /* The number of pages is (PMAX - PMIN)+1 */
+ rdmsr(MSR_GLIU_P2D_RO0, lo, hi);
+
+ /* PMAX */
+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
+ /* PMIN */
+ val -= (lo & 0x000fffff);
+ val += 1;
+
+ /* The page size is 4k */
+ return (val << 12);
+ }
+
/* The frame buffer size is reported by a VSM in VSA II */
/* Virtual Register Class = 0x02 */
/* VG_MEM_SIZE (1MB units) = 0x00 */
- outw(0xFC53, 0xAC1C);
- outw(0x0200, 0xAC1C);
+ outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
+ outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX);
- val = (unsigned int)(inw(0xAC1E)) & 0xFE;
+ val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFE;
return (val << 20);
}
/* Set output mode */
rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
- msrval &= ~DF_CONFIG_OUTPUT_MASK;
+ msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT;
if (par->output & OUTPUT_PANEL) {
- msrval |= DF_OUTPUT_PANEL;
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP;
if (par->output & OUTPUT_CRT)
- msrval |= DF_SIMULTANEOUS_CRT_AND_FP;
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FPC;
else
- msrval &= ~DF_SIMULTANEOUS_CRT_AND_FP;
- } else {
- msrval |= DF_OUTPUT_CRT;
- }
+ msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC;
+ } else
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT;
wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
rdmsrl(MSR_LX_SPARE_MSR, msrval);
- msrval &= ~(DC_SPARE_DISABLE_CFIFO_HGO | DC_SPARE_VFIFO_ARB_SELECT |
- DC_SPARE_LOAD_WM_LPEN_MASK | DC_SPARE_WM_LPEN_OVRD |
- DC_SPARE_DISABLE_INIT_VID_PRI | DC_SPARE_DISABLE_VFIFO_WM);
- msrval |= DC_SPARE_DISABLE_VFIFO_WM | DC_SPARE_DISABLE_INIT_VID_PRI;
+ msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO
+ | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL
+ | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M
+ | MSR_LX_SPARE_MSR_WM_LPEN_OVRD);
+ msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM |
+ MSR_LX_SPARE_MSR_DIS_INIT_V_PRI;
wrmsrl(MSR_LX_SPARE_MSR, msrval);
gcfg = DC_GENERAL_CFG_DFLE; /* Display fifo enable */
int lx_blank_display(struct fb_info *info, int blank_mode)
{
struct lxfb_par *par = info->par;
- u32 dcfg, fp_pm;
+ u32 dcfg, misc, fp_pm;
int blank, hsync, vsync;
/* CRT power saving modes. */
}
dcfg = read_vp(par, VP_DCFG);
- dcfg &= ~(VP_DCFG_DAC_BL_EN | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN);
+ dcfg &= ~(VP_DCFG_DAC_BL_EN | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN |
+ VP_DCFG_CRT_EN);
if (!blank)
- dcfg |= VP_DCFG_DAC_BL_EN;
+ dcfg |= VP_DCFG_DAC_BL_EN | VP_DCFG_CRT_EN;
if (hsync)
dcfg |= VP_DCFG_HSYNC_EN;
if (vsync)
dcfg |= VP_DCFG_VSYNC_EN;
+
write_vp(par, VP_DCFG, dcfg);
+ misc = read_vp(par, VP_MISC);
+
+ if (vsync && hsync)
+ misc &= ~VP_MISC_DACPWRDN;
+ else
+ misc |= VP_MISC_DACPWRDN;
+
+ write_vp(par, VP_MISC, misc);
+
/* Power on/off flat panel */
if (par->output & OUTPUT_PANEL) {
return 0;
}
+
+#ifdef CONFIG_PM
+
+static void lx_save_regs(struct lxfb_par *par)
+{
+ uint32_t filt;
+ int i;
+
+ /* wait for the BLT engine to stop being busy */
+ do {
+ i = read_gp(par, GP_BLT_STATUS);
+ } while ((i & GP_BLT_STATUS_PB) || !(i & GP_BLT_STATUS_CE));
+
+ /* save MSRs */
+ rdmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
+ rdmsrl(MSR_GLCP_DOTPLL, par->msr.dotpll);
+ rdmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
+ rdmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
+
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+
+ /* save registers */
+ memcpy(par->gp, par->gp_regs, sizeof(par->gp));
+ memcpy(par->dc, par->dc_regs, sizeof(par->dc));
+ memcpy(par->vp, par->vp_regs, sizeof(par->vp));
+ memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
+
+ /* save the palette */
+ write_dc(par, DC_PAL_ADDRESS, 0);
+ for (i = 0; i < ARRAY_SIZE(par->pal); i++)
+ par->pal[i] = read_dc(par, DC_PAL_DATA);
+
+ /* save the horizontal filter coefficients */
+ filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ par->hcoeff[i] = read_dc(par, DC_FILT_COEFF1);
+ par->hcoeff[i + 1] = read_dc(par, DC_FILT_COEFF2);
+ }
+
+ /* save the vertical filter coefficients */
+ filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ par->vcoeff[i] = read_dc(par, DC_FILT_COEFF1);
+ }
+
+ /* save video coeff ram */
+ memcpy(par->vp_coeff, par->vp_regs + VP_VCR, sizeof(par->vp_coeff));
+}
+
+static void lx_restore_gfx_proc(struct lxfb_par *par)
+{
+ int i;
+
+ /* a bunch of registers require GP_RASTER_MODE to be set first */
+ write_gp(par, GP_RASTER_MODE, par->gp[GP_RASTER_MODE]);
+
+ for (i = 0; i < ARRAY_SIZE(par->gp); i++) {
+ switch (i) {
+ case GP_RASTER_MODE:
+ case GP_VECTOR_MODE:
+ case GP_BLT_MODE:
+ case GP_BLT_STATUS:
+ case GP_HST_SRC:
+ /* FIXME: restore LUT data */
+ case GP_LUT_INDEX:
+ case GP_LUT_DATA:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_gp(par, i, par->gp[i]);
+ }
+ }
+}
+
+static void lx_restore_display_ctlr(struct lxfb_par *par)
+{
+ uint32_t filt;
+ int i;
+
+ wrmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
+
+ for (i = 0; i < ARRAY_SIZE(par->dc); i++) {
+ switch (i) {
+ case DC_UNLOCK:
+ /* unlock the DC; runs first */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+ break;
+
+ case DC_GENERAL_CFG:
+ case DC_DISPLAY_CFG:
+ /* disable all while restoring */
+ write_dc(par, i, 0);
+ break;
+
+ case DC_DV_CTL:
+ /* set all ram to dirty */
+ write_dc(par, i, par->dc[i] | DC_DV_CTL_CLEAR_DV_RAM);
+
+ case DC_RSVD_1:
+ case DC_RSVD_2:
+ case DC_RSVD_3:
+ case DC_LINE_CNT:
+ case DC_PAL_ADDRESS:
+ case DC_PAL_DATA:
+ case DC_DFIFO_DIAG:
+ case DC_CFIFO_DIAG:
+ case DC_FILT_COEFF1:
+ case DC_FILT_COEFF2:
+ case DC_RSVD_4:
+ case DC_RSVD_5:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_dc(par, i, par->dc[i]);
+ }
+ }
+
+ /* restore the palette */
+ write_dc(par, DC_PAL_ADDRESS, 0);
+ for (i = 0; i < ARRAY_SIZE(par->pal); i++)
+ write_dc(par, DC_PAL_DATA, par->pal[i]);
+
+ /* restore the horizontal filter coefficients */
+ filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ write_dc(par, DC_FILT_COEFF1, par->hcoeff[i]);
+ write_dc(par, DC_FILT_COEFF2, par->hcoeff[i + 1]);
+ }
+
+ /* restore the vertical filter coefficients */
+ filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ write_dc(par, DC_FILT_COEFF1, par->vcoeff[i]);
+ }
+}
+
+static void lx_restore_video_proc(struct lxfb_par *par)
+{
+ int i;
+
+ wrmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
+ wrmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
+
+ for (i = 0; i < ARRAY_SIZE(par->vp); i++) {
+ switch (i) {
+ case VP_VCFG:
+ case VP_DCFG:
+ case VP_PAR:
+ case VP_PDR:
+ case VP_CCS:
+ case VP_RSVD_0:
+ /* case VP_VDC: */ /* why should this not be restored? */
+ case VP_RSVD_1:
+ case VP_CRC32:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_vp(par, i, par->vp[i]);
+ }
+ }
+
+ /* restore video coeff ram */
+ memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
+}
+
+static void lx_restore_regs(struct lxfb_par *par)
+{
+ int i;
+
+ lx_set_dotpll((u32) (par->msr.dotpll >> 32));
+ lx_restore_gfx_proc(par);
+ lx_restore_display_ctlr(par);
+ lx_restore_video_proc(par);
+
+ /* Flat Panel */
+ for (i = 0; i < ARRAY_SIZE(par->fp); i++) {
+ switch (i) {
+ case FP_PM:
+ case FP_RSVD_0:
+ case FP_RSVD_1:
+ case FP_RSVD_2:
+ case FP_RSVD_3:
+ case FP_RSVD_4:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_fp(par, i, par->fp[i]);
+ }
+ }
+
+ /* control the panel */
+ if (par->fp[FP_PM] & FP_PM_P) {
+ /* power on the panel if not already power{ed,ing} on */
+ if (!(read_fp(par, FP_PM) &
+ (FP_PM_PANEL_ON|FP_PM_PANEL_PWR_UP)))
+ write_fp(par, FP_PM, par->fp[FP_PM]);
+ } else {
+ /* power down the panel if not already power{ed,ing} down */
+ if (!(read_fp(par, FP_PM) &
+ (FP_PM_PANEL_OFF|FP_PM_PANEL_PWR_DOWN)))
+ write_fp(par, FP_PM, par->fp[FP_PM]);
+ }
+
+ /* turn everything on */
+ write_vp(par, VP_VCFG, par->vp[VP_VCFG]);
+ write_vp(par, VP_DCFG, par->vp[VP_DCFG]);
+ write_dc(par, DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG]);
+ /* do this last; it will enable the FIFO load */
+ write_dc(par, DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG]);
+
+ /* lock the door behind us */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
+}
+
+int lx_powerdown(struct fb_info *info)
+{
+ struct lxfb_par *par = info->par;
+
+ if (par->powered_down)
+ return 0;
+
+ lx_save_regs(par);
+ lx_graphics_disable(info);
+
+ par->powered_down = 1;
+ return 0;
+}
+
+int lx_powerup(struct fb_info *info)
+{
+ struct lxfb_par *par = info->par;
+
+ if (!par->powered_down)
+ return 0;
+
+ lx_restore_regs(par);
+
+ par->powered_down = 0;
+ return 0;
+}
+
+#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff