#ifdef CONFIG_ATARI
#include <asm/atariints.h>
#endif
-#ifdef CONFIG_MAC
-#include <asm/macints.h>
-#endif
#if defined(__mc68000__)
#include <asm/machdep.h>
#include <asm/setup.h>
#include "fbcon.h"
#ifdef FBCONDEBUG
-# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , ## args)
+# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
#else
# define DPRINTK(fmt, args...)
#endif
static signed char con2fb_map[MAX_NR_CONSOLES];
static signed char con2fb_map_boot[MAX_NR_CONSOLES];
-#ifndef MODULE
-static int logo_height;
-#endif
+
static int logo_lines;
/* logo_shown is an index to vc_cons when >= 0; otherwise follows FBCON_LOGO
enums. */
static int info_idx = -1;
/* console rotation */
-static int rotate;
+static int initial_rotation;
static int fbcon_has_sysfs;
static const struct consw fb_con;
/* # VBL ints between cursor state changes */
#define ATARI_CURSOR_BLINK_RATE (42)
-#define MAC_CURSOR_BLINK_RATE (32)
-#define DEFAULT_CURSOR_BLINK_RATE (20)
static int vbl_cursor_cnt;
static int fbcon_cursor_noblink;
static void fbcon_exit(void);
static struct device *fbcon_device;
-#ifdef CONFIG_MAC
-/*
- * On the Macintoy, there may or may not be a working VBL int. We need to probe
- */
-static int vbl_detected;
-
-static irqreturn_t fb_vbl_detect(int irq, void *dummy)
-{
- vbl_detected++;
- return IRQ_HANDLED;
-}
-#endif
-
#ifdef CONFIG_FRAMEBUFFER_CONSOLE_ROTATION
static inline void fbcon_set_rotation(struct fb_info *info)
{
switch (depth) {
case 1:
{
- int col = ~(0xfff << (max(info->var.green.length,
- max(info->var.red.length,
- info->var.blue.length)))) & 0xff;
-
+ int col = mono_col(info);
/* 0 or 1 */
int fg = (info->fix.visual != FB_VISUAL_MONO01) ? col : 0;
int bg = (info->fix.visual != FB_VISUAL_MONO01) ? 0 : col;
release_console_sem();
}
-#if defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#ifdef CONFIG_ATARI
static int cursor_blink_rate;
static irqreturn_t fb_vbl_handler(int irq, void *dev_id)
{
if (!strncmp(options, "rotate:", 7)) {
options += 7;
if (*options)
- rotate = simple_strtoul(options, &options, 0);
- if (rotate > 3)
- rotate = 0;
+ initial_rotation = simple_strtoul(options, &options, 0);
+ if (initial_rotation > 3)
+ initial_rotation = 0;
}
}
return 1;
struct fbcon_ops *ops = info->fbcon_par;
int cnt, erase = vc->vc_video_erase_char, step;
unsigned short *save = NULL, *r, *q;
+ int logo_height;
if (info->flags & FBINFO_MODULE) {
logo_shown = FBCON_LOGO_DONTSHOW;
if (fb_get_color_depth(&info->var, &info->fix) == 1)
erase &= ~0x400;
logo_height = fb_prepare_logo(info, ops->rotate);
- logo_lines = (logo_height + vc->vc_font.height - 1) /
- vc->vc_font.height;
+ logo_lines = DIV_ROUND_UP(logo_height, vc->vc_font.height);
q = (unsigned short *) (vc->vc_origin +
vc->vc_size_row * rows);
step = logo_lines * cols;
struct fb_info *info = NULL;
struct fbcon_ops *ops;
int rows, cols;
- int irqres;
- irqres = 1;
/*
* If num_registered_fb is zero, this is a call for the dummy part.
* The frame buffer devices weren't initialized yet.
ops->graphics = 1;
ops->cur_rotate = -1;
info->fbcon_par = ops;
- p->con_rotate = rotate;
+ p->con_rotate = initial_rotation;
set_blitting_type(vc, info);
if (info->fix.type != FB_TYPE_TEXT) {
#ifdef CONFIG_ATARI
if (MACH_IS_ATARI) {
cursor_blink_rate = ATARI_CURSOR_BLINK_RATE;
- irqres =
- request_irq(IRQ_AUTO_4, fb_vbl_handler,
+ (void)request_irq(IRQ_AUTO_4, fb_vbl_handler,
IRQ_TYPE_PRIO, "framebuffer vbl",
info);
}
-#endif /* CONFIG_ATARI */
-
-#ifdef CONFIG_MAC
- /*
- * On a Macintoy, the VBL interrupt may or may not be active.
- * As interrupt based cursor is more reliable and race free, we
- * probe for VBL interrupts.
- */
- if (MACH_IS_MAC) {
- int ct = 0;
- /*
- * Probe for VBL: set temp. handler ...
- */
- irqres = request_irq(IRQ_MAC_VBL, fb_vbl_detect, 0,
- "framebuffer vbl", info);
- vbl_detected = 0;
-
- /*
- * ... and spin for 20 ms ...
- */
- while (!vbl_detected && ++ct < 1000)
- udelay(20);
-
- if (ct == 1000)
- printk
- ("fbcon_startup: No VBL detected, using timer based cursor.\n");
-
- free_irq(IRQ_MAC_VBL, fb_vbl_detect);
-
- if (vbl_detected) {
- /*
- * interrupt based cursor ok
- */
- cursor_blink_rate = MAC_CURSOR_BLINK_RATE;
- irqres =
- request_irq(IRQ_MAC_VBL, fb_vbl_handler, 0,
- "framebuffer vbl", info);
- } else {
- /*
- * VBL not detected: fall through, use timer based cursor
- */
- irqres = 1;
- }
- }
-#endif /* CONFIG_MAC */
+#endif /* CONFIG_ATARI */
fbcon_add_cursor_timer(info);
fbcon_has_exited = 0;
con_copy_unimap(vc, svc);
ops = info->fbcon_par;
- p->con_rotate = rotate;
+ p->con_rotate = initial_rotation;
set_blitting_type(vc, info);
cols = vc->vc_cols;
if (!height || !width)
return;
+ if (sy < vc->vc_top && vc->vc_top == logo_lines)
+ vc->vc_top = 0;
+
/* Split blits that cross physical y_wrap boundary */
y_break = p->vrows - p->yscroll;
height, width);
}
-static __inline__ void updatescrollmode(struct display *p,
+static void updatescrollmode(struct display *p,
struct fb_info *info,
struct vc_data *vc)
{
* in fb_set_var()
*/
info->var.activate = var.activate;
- var.yoffset = info->var.yoffset;
- var.xoffset = info->var.xoffset;
- var.vmode = info->var.vmode;
+ var.vmode |= info->var.vmode & ~FB_VMODE_MASK;
fb_set_var(info, &var);
ops->var = info->var;
fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
ops->cursor_flash = (!blank);
- if (fb_blank(info, blank))
- fbcon_generic_blank(vc, info, blank);
+ if (!(info->flags & FBINFO_MISC_USEREVENT))
+ if (fb_blank(info, blank))
+ fbcon_generic_blank(vc, info, blank);
}
if (!blank)
{
struct fb_info *info = registered_fb[con2fb_map[fg_console]];
struct fbcon_ops *ops = info->fbcon_par;
- struct display *p = &fb_display[fg_console];
+ struct display *disp = &fb_display[fg_console];
int offset, limit, scrollback_old;
if (softback_top) {
logo_shown = FBCON_LOGO_CANSHOW;
}
fbcon_cursor(vc, CM_ERASE | CM_SOFTBACK);
- fbcon_redraw_softback(vc, p, lines);
+ fbcon_redraw_softback(vc, disp, lines);
fbcon_cursor(vc, CM_DRAW | CM_SOFTBACK);
return 0;
}
fbcon_cursor(vc, CM_ERASE);
- offset = p->yscroll - scrollback_current;
- limit = p->vrows;
- switch (p->scrollmode) {
+ offset = disp->yscroll - scrollback_current;
+ limit = disp->vrows;
+ switch (disp->scrollmode) {
case SCROLL_WRAP_MOVE:
info->var.vmode |= FB_VMODE_YWRAP;
break;
p = &fb_display[vc->vc_num];
set_blitting_type(vc, info);
var_to_display(p, &info->var, info);
- cols = FBCON_SWAP(p->rotate, info->var.xres, info->var.yres);
- rows = FBCON_SWAP(p->rotate, info->var.yres, info->var.xres);
+ cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
+ rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
cols /= vc->vc_font.width;
rows /= vc->vc_font.height;
vc_resize(vc, cols, rows);
#ifdef CONFIG_ATARI
free_irq(IRQ_AUTO_4, fb_vbl_handler);
#endif
-#ifdef CONFIG_MAC
- if (MACH_IS_MAC && vbl_detected)
- free_irq(IRQ_MAC_VBL, fb_vbl_handler);
-#endif
kfree((void *)softback_buf);
softback_buf = 0UL;
for (i = 0; i < FB_MAX; i++) {
+ int pending;
+
mapped = 0;
info = registered_fb[i];
if (info == NULL)
continue;
+ pending = cancel_work_sync(&info->queue);
+ DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" :
+ "no"));
+
for (j = first_fb_vc; j <= last_fb_vc; j++) {
if (con2fb_map[j] == i)
mapped = 1;
acquire_console_sem();
fb_register_client(&fbcon_event_notifier);
- fbcon_device = device_create(fb_class, NULL, MKDEV(0, 0), "fbcon");
+ fbcon_device = device_create(fb_class, NULL, MKDEV(0, 0), NULL,
+ "fbcon");
if (IS_ERR(fbcon_device)) {
printk(KERN_WARNING "Unable to create device "