/* board types */
enum cirrus_board {
BT_NONE = 0,
- BT_SD64,
- BT_PICCOLO,
- BT_PICASSO,
- BT_SPECTRUM,
+ BT_SD64, /* GD5434 */
+ BT_PICCOLO, /* GD5426 */
+ BT_PICASSO, /* GD5426 or GD5428 */
+ BT_SPECTRUM, /* GD5426 or GD5428 */
BT_PICASSO4, /* GD5446 */
BT_ALPINE, /* GD543x/4x */
BT_GD5480,
- BT_LAGUNA, /* GD546x */
+ BT_LAGUNA, /* GD5462/64 */
+ BT_LAGUNAB, /* GD5465 */
};
/*
.scrn_start_bit19 = true,
.sr07 = 0xF0,
.sr07_1bpp = 0xF0,
+ .sr07_1bpp_mux = 0xF6,
.sr07_8bpp = 0xF1,
- .sr1f = 0x20
+ .sr07_8bpp_mux = 0xF7,
+ .sr1f = 0x1E
},
[BT_PICCOLO] = {
.name = "CL Piccolo",
.init_sr07 = true,
.init_sr1f = false,
.scrn_start_bit19 = true,
- .sr07 = 0x20,
- .sr07_1bpp = 0x20,
- .sr07_8bpp = 0x21,
+ .sr07 = 0xA0,
+ .sr07_1bpp = 0xA0,
+ .sr07_1bpp_mux = 0xA6,
+ .sr07_8bpp = 0xA1,
+ .sr07_8bpp_mux = 0xA7,
.sr1f = 0
},
[BT_ALPINE] = {
.init_sr1f = true,
.scrn_start_bit19 = true,
.sr07 = 0xA0,
- .sr07_1bpp = 0xA1,
- .sr07_1bpp_mux = 0xA7,
+ .sr07_1bpp = 0xA0,
+ .sr07_1bpp_mux = 0xA6,
.sr07_8bpp = 0xA1,
.sr07_8bpp_mux = 0xA7,
.sr1f = 0x1C
[BT_LAGUNA] = {
.name = "CL Laguna",
.maxclock = {
- /* guess */
- 135100, 135100, 135100, 135100, 135100,
+ /* taken from X11 code */
+ 170000, 170000, 170000, 170000, 135100,
+ },
+ .init_sr07 = false,
+ .init_sr1f = false,
+ .scrn_start_bit19 = true,
+ },
+ [BT_LAGUNAB] = {
+ .name = "CL Laguna AGP",
+ .maxclock = {
+ /* taken from X11 code */
+ 170000, 250000, 170000, 170000, 135100,
},
.init_sr07 = false,
.init_sr1f = false,
static struct pci_device_id cirrusfb_pci_table[] = {
CHIP(PCI_DEVICE_ID_CIRRUS_5436, BT_ALPINE),
- CHIP(PCI_DEVICE_ID_CIRRUS_5434_8, BT_ALPINE),
- CHIP(PCI_DEVICE_ID_CIRRUS_5434_4, BT_ALPINE),
+ CHIP(PCI_DEVICE_ID_CIRRUS_5434_8, BT_SD64),
+ CHIP(PCI_DEVICE_ID_CIRRUS_5434_4, BT_SD64),
CHIP(PCI_DEVICE_ID_CIRRUS_5430, BT_ALPINE), /* GD-5440 is same id */
CHIP(PCI_DEVICE_ID_CIRRUS_7543, BT_ALPINE),
CHIP(PCI_DEVICE_ID_CIRRUS_7548, BT_ALPINE),
CHIP(PCI_DEVICE_ID_CIRRUS_5446, BT_PICASSO4), /* Picasso 4 is 5446 */
CHIP(PCI_DEVICE_ID_CIRRUS_5462, BT_LAGUNA), /* CL Laguna */
CHIP(PCI_DEVICE_ID_CIRRUS_5464, BT_LAGUNA), /* CL Laguna 3D */
- CHIP(PCI_DEVICE_ID_CIRRUS_5465, BT_LAGUNA), /* CL Laguna 3DA*/
+ CHIP(PCI_DEVICE_ID_CIRRUS_5465, BT_LAGUNAB), /* CL Laguna 3DA*/
{ 0, }
};
MODULE_DEVICE_TABLE(pci, cirrusfb_pci_table);
unsigned char SFR; /* Shadow of special function register */
int multiplexing;
+ int doubleVCLK;
int blank_mode;
u32 pseudo_palette[16];
static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel,
u_short x, u_short y,
u_short width, u_short height,
- u_char color, u_short line_length);
+ u32 fg_color, u32 bg_color,
+ u_short line_length, u_char blitmode);
static void bestclock(long freq, int *nom, int *den, int *div);
/*****************************************************************************/
/*** BEGIN Interface Used by the World ***************************************/
+static inline int is_laguna(const struct cirrusfb_info *cinfo)
+{
+ return cinfo->btype == BT_LAGUNA || cinfo->btype == BT_LAGUNAB;
+}
+
static int opencount;
/*--- Open /dev/fbx ---------------------------------------------------------*/
return 0;
}
+static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ long freq;
+ long maxclock;
+ struct cirrusfb_info *cinfo = info->par;
+ unsigned maxclockidx = var->bits_per_pixel >> 3;
+
+ /* convert from ps to kHz */
+ freq = PICOS2KHZ(var->pixclock);
+
+ dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
+
+ maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx];
+ cinfo->multiplexing = 0;
+
+ /* If the frequency is greater than we can support, we might be able
+ * to use multiplexing for the video mode */
+ if (freq > maxclock) {
+ dev_err(info->device,
+ "Frequency greater than maxclock (%ld kHz)\n",
+ maxclock);
+ return -EINVAL;
+ }
+ /*
+ * Additional constraint: 8bpp uses DAC clock doubling to allow maximum
+ * pixel clock
+ */
+ if (var->bits_per_pixel == 8) {
+ switch (cinfo->btype) {
+ case BT_ALPINE:
+ case BT_SD64:
+ case BT_PICASSO4:
+ if (freq > 85500)
+ cinfo->multiplexing = 1;
+ break;
+ case BT_GD5480:
+ if (freq > 135100)
+ cinfo->multiplexing = 1;
+ break;
+
+ default:
+ break;
+ }
+ }
+
+ /* If we have a 1MB 5434, we need to put ourselves in a mode where
+ * the VCLK is double the pixel clock. */
+ cinfo->doubleVCLK = 0;
+ if (cinfo->btype == BT_SD64 && info->fix.smem_len <= MB_ &&
+ var->bits_per_pixel == 16) {
+ cinfo->doubleVCLK = 1;
+ }
+
+ return 0;
+}
+
static int cirrusfb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
int yres;
/* memory size in pixels */
unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
+ struct cirrusfb_info *cinfo = info->par;
switch (var->bits_per_pixel) {
case 1:
case 8:
var->red.offset = 0;
- var->red.length = 6;
+ var->red.length = 8;
var->green = var->red;
var->blue = var->red;
break;
var->blue.length = 5;
break;
- case 32:
+ case 24:
if (isPReP) {
- var->red.offset = 8;
- var->green.offset = 16;
- var->blue.offset = 24;
+ var->red.offset = 0;
+ var->green.offset = 8;
+ var->blue.offset = 16;
} else {
var->red.offset = 16;
var->green.offset = 8;
default:
dev_dbg(info->device,
"Unsupported bpp size: %d\n", var->bits_per_pixel);
- assert(false);
- /* should never occur */
- break;
+ return -EINVAL;
}
if (var->xres_virtual < var->xres)
return -EINVAL;
}
-
if (var->xoffset < 0)
var->xoffset = 0;
if (var->yoffset < 0)
return -EINVAL;
}
- return 0;
-}
-
-static int cirrusfb_decode_var(const struct fb_var_screeninfo *var,
- struct fb_info *info)
-{
- long freq;
- long maxclock;
- int maxclockidx = var->bits_per_pixel >> 3;
- struct cirrusfb_info *cinfo = info->par;
-
- switch (var->bits_per_pixel) {
- case 1:
- info->fix.line_length = var->xres_virtual / 8;
- info->fix.visual = FB_VISUAL_MONO10;
- break;
-
- case 8:
- info->fix.line_length = var->xres_virtual;
- info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
- break;
-
- case 16:
- case 32:
- info->fix.line_length = var->xres_virtual * maxclockidx;
- info->fix.visual = FB_VISUAL_TRUECOLOR;
- break;
-
- default:
- dev_dbg(info->device,
- "Unsupported bpp size: %d\n", var->bits_per_pixel);
- assert(false);
- /* should never occur */
- break;
- }
-
- info->fix.type = FB_TYPE_PACKED_PIXELS;
-
- /* convert from ps to kHz */
- freq = PICOS2KHZ(var->pixclock);
-
- dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq);
-
- maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx];
- cinfo->multiplexing = 0;
+ if (cirrusfb_check_pixclock(var, info))
+ return -EINVAL;
- /* If the frequency is greater than we can support, we might be able
- * to use multiplexing for the video mode */
- if (freq > maxclock) {
- switch (cinfo->btype) {
- case BT_ALPINE:
- case BT_GD5480:
- cinfo->multiplexing = 1;
- break;
+ if (!is_laguna(cinfo))
+ var->accel_flags = FB_ACCELF_TEXT;
- default:
- dev_err(info->device,
- "Frequency greater than maxclock (%ld kHz)\n",
- maxclock);
- return -EINVAL;
- }
- }
-#if 0
- /* TODO: If we have a 1MB 5434, we need to put ourselves in a mode where
- * the VCLK is double the pixel clock. */
- switch (var->bits_per_pixel) {
- case 16:
- case 32:
- if (var->xres <= 800)
- /* Xbh has this type of clock for 32-bit */
- freq /= 2;
- break;
- }
-#endif
return 0;
}
struct fb_var_screeninfo *var = &info->var;
u8 __iomem *regbase = cinfo->regbase;
unsigned char tmp;
- int err;
int pitch;
const struct cirrusfb_board_info_rec *bi;
int hdispend, hsyncstart, hsyncend, htotal;
int yres, vdispend, vsyncstart, vsyncend, vtotal;
long freq;
int nom, den, div;
- unsigned int control, format, threshold;
+ unsigned int control = 0, format = 0, threshold = 0;
dev_dbg(info->device, "Requested mode: %dx%dx%d\n",
var->xres, var->yres, var->bits_per_pixel);
- dev_dbg(info->device, "pixclock: %d\n", var->pixclock);
- init_vgachip(info);
+ switch (var->bits_per_pixel) {
+ case 1:
+ info->fix.line_length = var->xres_virtual / 8;
+ info->fix.visual = FB_VISUAL_MONO10;
+ break;
- err = cirrusfb_decode_var(var, info);
- if (err) {
- /* should never happen */
- dev_dbg(info->device, "mode change aborted. invalid var.\n");
- return -EINVAL;
+ case 8:
+ info->fix.line_length = var->xres_virtual;
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ break;
+
+ case 16:
+ case 24:
+ info->fix.line_length = var->xres_virtual *
+ var->bits_per_pixel >> 3;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ break;
}
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+
+ init_vgachip(info);
bi = &cirrusfb_board_info[cinfo->btype];
hsyncstart = var->xres + var->right_margin;
hsyncend = hsyncstart + var->hsync_len;
- htotal = (hsyncend + var->left_margin) / 8 - 5;
- hdispend = var->xres / 8 - 1;
- hsyncstart = hsyncstart / 8 + 1;
- hsyncend = hsyncend / 8 + 1;
+ htotal = (hsyncend + var->left_margin) / 8;
+ hdispend = var->xres / 8;
+ hsyncstart = hsyncstart / 8;
+ hsyncend = hsyncend / 8;
- yres = var->yres;
- vsyncstart = yres + var->lower_margin;
+ vdispend = var->yres;
+ vsyncstart = vdispend + var->lower_margin;
vsyncend = vsyncstart + var->vsync_len;
vtotal = vsyncend + var->upper_margin;
- vdispend = yres - 1;
if (var->vmode & FB_VMODE_DOUBLE) {
- yres *= 2;
+ vdispend *= 2;
vsyncstart *= 2;
vsyncend *= 2;
vtotal *= 2;
} else if (var->vmode & FB_VMODE_INTERLACED) {
- yres = (yres + 1) / 2;
+ vdispend = (vdispend + 1) / 2;
vsyncstart = (vsyncstart + 1) / 2;
vsyncend = (vsyncend + 1) / 2;
vtotal = (vtotal + 1) / 2;
}
-
- vtotal -= 2;
- vsyncstart -= 1;
- vsyncend -= 1;
-
+ yres = vdispend;
if (yres >= 1024) {
vtotal /= 2;
vsyncstart /= 2;
vsyncend /= 2;
vdispend /= 2;
}
+
+ vdispend -= 1;
+ vsyncstart -= 1;
+ vsyncend -= 1;
+ vtotal -= 2;
+
if (cinfo->multiplexing) {
htotal /= 2;
hsyncstart /= 2;
hsyncend /= 2;
hdispend /= 2;
}
+
+ htotal -= 5;
+ hdispend -= 1;
+ hsyncstart += 1;
+ hsyncend += 1;
+
/* unlock register VGA_CRTC_H_TOTAL..CRT7 */
vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, 0x20); /* previously: 0x00) */
vga_wcrt(regbase, CL_CRT1A, tmp);
freq = PICOS2KHZ(var->pixclock);
+ if (var->bits_per_pixel == 24)
+ if (cinfo->btype == BT_ALPINE || cinfo->btype == BT_SD64)
+ freq *= 3;
+ if (cinfo->multiplexing)
+ freq /= 2;
+ if (cinfo->doubleVCLK)
+ freq *= 2;
+
bestclock(freq, &nom, &den, &div);
dev_dbg(info->device, "VCLK freq: %ld kHz nom: %d den: %d div: %d\n",
/* formula: VClk = (OSC * N) / (D * (1+P)) */
/* Example: VClk = (14.31818 * 91) / (23 * (1+1)) = 28.325 MHz */
- if (cinfo->btype == BT_ALPINE) {
+ if (cinfo->btype == BT_ALPINE || cinfo->btype == BT_PICASSO4 ||
+ cinfo->btype == BT_SD64) {
/* if freq is close to mclk or mclk/2 select mclk
* as clock source
*/
int divMCLK = cirrusfb_check_mclk(info, freq);
- if (divMCLK) {
+ if (divMCLK)
nom = 0;
- cirrusfb_set_mclk_as_source(info, divMCLK);
- }
+ cirrusfb_set_mclk_as_source(info, divMCLK);
}
- if (cinfo->btype == BT_LAGUNA) {
+ if (is_laguna(cinfo)) {
long pcifc = fb_readl(cinfo->laguna_mmio + 0x3fc);
unsigned char tile = fb_readb(cinfo->laguna_mmio + 0x407);
unsigned short tile_control;
- tile_control = fb_readw(cinfo->laguna_mmio + 0x2c4);
- fb_writew(tile_control & ~0x80, cinfo->laguna_mmio + 0x2c4);
+ if (cinfo->btype == BT_LAGUNAB) {
+ tile_control = fb_readw(cinfo->laguna_mmio + 0x2c4);
+ tile_control &= ~0x80;
+ fb_writew(tile_control, cinfo->laguna_mmio + 0x2c4);
+ }
fb_writel(pcifc | 0x10000000l, cinfo->laguna_mmio + 0x3fc);
fb_writeb(tile & 0x3f, cinfo->laguna_mmio + 0x407);
threshold = fb_readw(cinfo->laguna_mmio + 0xea);
control &= ~0x6800;
format = 0;
- threshold &= 0xffe0;
- threshold &= 0x3fbf;
+ threshold &= 0xffc0 & 0x3fbf;
}
if (nom) {
tmp = den << 1;
(cinfo->btype == BT_GD5480))
tmp |= 0x80;
- dev_dbg(info->device, "CL_SEQR1B: %d\n", (int) tmp);
/* Laguna chipset has reversed clock registers */
- if (cinfo->btype == BT_LAGUNA) {
+ if (is_laguna(cinfo)) {
vga_wseq(regbase, CL_SEQRE, tmp);
vga_wseq(regbase, CL_SEQR1E, nom);
} else {
- vga_wseq(regbase, CL_SEQRB, nom);
- vga_wseq(regbase, CL_SEQR1B, tmp);
+ vga_wseq(regbase, CL_SEQRE, nom);
+ vga_wseq(regbase, CL_SEQR1E, tmp);
}
}
* address wrap, no compat. */
vga_wcrt(regbase, VGA_CRTC_MODE, 0xc3);
-/* HAEH? vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, 0x20);
- * previously: 0x00 unlock VGA_CRTC_H_TOTAL..CRT7 */
-
/* don't know if it would hurt to also program this if no interlaced */
/* mode is used, but I feel better this way.. :-) */
if (var->vmode & FB_VMODE_INTERLACED)
else
vga_wcrt(regbase, VGA_CRTC_REGS, 0x00); /* interlace control */
- vga_wseq(regbase, VGA_SEQ_CHARACTER_MAP, 0);
-
- /* adjust horizontal/vertical sync type (low/high) */
+ /* adjust horizontal/vertical sync type (low/high), use VCLK3 */
/* enable display memory & CRTC I/O address for color mode */
- tmp = 0x03;
+ tmp = 0x03 | 0xc;
if (var->sync & FB_SYNC_HOR_HIGH_ACT)
tmp |= 0x40;
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
tmp |= 0x80;
WGen(cinfo, VGA_MIS_W, tmp);
- /* Screen A Preset Row-Scan register */
- vga_wcrt(regbase, VGA_CRTC_PRESET_ROW, 0);
/* text cursor on and start line */
vga_wcrt(regbase, VGA_CRTC_CURSOR_START, 0);
/* text cursor end line */
break;
case BT_LAGUNA:
+ case BT_LAGUNAB:
vga_wseq(regbase, CL_SEQR7,
vga_rseq(regbase, CL_SEQR7) & ~0x01);
break;
/* Extended Sequencer Mode */
switch (cinfo->btype) {
- case BT_SD64:
- /* setting the SEQRF on SD64 is not necessary
- * (only during init)
- */
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1a);
- break;
case BT_PICCOLO:
case BT_SPECTRUM:
- /* ### ueberall 0x22? */
- /* ##vorher 1c MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
/* evtl d0 bei 1 bit? avoid FIFO underruns..? */
vga_wseq(regbase, CL_SEQRF, 0xb0);
break;
case BT_PICASSO:
- /* ##vorher 22 MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
/* ## vorher d0 avoid FIFO underruns..? */
vga_wseq(regbase, CL_SEQRF, 0xd0);
break;
+ case BT_SD64:
case BT_PICASSO4:
case BT_ALPINE:
case BT_GD5480:
case BT_LAGUNA:
+ case BT_LAGUNAB:
/* do nothing */
break;
break;
case BT_LAGUNA:
+ case BT_LAGUNAB:
vga_wseq(regbase, CL_SEQR7,
vga_rseq(regbase, CL_SEQR7) | 0x01);
threshold |= 0x10;
}
switch (cinfo->btype) {
- case BT_SD64:
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1d);
- break;
-
case BT_PICCOLO:
case BT_PICASSO:
case BT_SPECTRUM:
- /* ### vorher 1c MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
break;
/* ### INCOMPLETE!! */
vga_wseq(regbase, CL_SEQRF, 0xb8);
#endif
-/* vga_wseq(regbase, CL_SEQR1F, 0x1c); */
- break;
-
case BT_ALPINE:
- /* We already set SRF and SR1F */
- break;
-
+ case BT_SD64:
case BT_GD5480:
case BT_LAGUNA:
+ case BT_LAGUNAB:
/* do nothing */
break;
else if (var->bits_per_pixel == 16) {
dev_dbg(info->device, "preparing for 16 bit deep display\n");
switch (cinfo->btype) {
- case BT_SD64:
- /* Extended Sequencer Mode: 256c col. mode */
- vga_wseq(regbase, CL_SEQR7, 0xf7);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1e);
- break;
-
case BT_PICCOLO:
case BT_SPECTRUM:
vga_wseq(regbase, CL_SEQR7, 0x87);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
case BT_PICASSO:
vga_wseq(regbase, CL_SEQR7, 0x27);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
+ case BT_SD64:
case BT_PICASSO4:
- vga_wseq(regbase, CL_SEQR7, 0x27);
-/* vga_wseq(regbase, CL_SEQR1F, 0x1c); */
- break;
-
case BT_ALPINE:
- vga_wseq(regbase, CL_SEQR7, 0xa7);
+ /* Extended Sequencer Mode: 256c col. mode */
+ vga_wseq(regbase, CL_SEQR7,
+ cinfo->doubleVCLK ? 0xa3 : 0xa7);
break;
case BT_GD5480:
break;
case BT_LAGUNA:
+ case BT_LAGUNAB:
vga_wseq(regbase, CL_SEQR7,
vga_rseq(regbase, CL_SEQR7) & ~0x01);
control |= 0x2000;
/* mode register: 256 color mode */
vga_wgfx(regbase, VGA_GFX_MODE, 64);
#ifdef CONFIG_PCI
- WHDR(cinfo, 0xc1); /* Copy Xbh */
+ WHDR(cinfo, cinfo->doubleVCLK ? 0xe1 : 0xc1);
#elif defined(CONFIG_ZORRO)
/* FIXME: CONFIG_PCI and CONFIG_ZORRO may be defined both */
WHDR(cinfo, 0xa0); /* hidden dac reg: nothing special */
/******************************************************
*
- * 32 bpp
+ * 24 bpp
*
*/
- else if (var->bits_per_pixel == 32) {
- dev_dbg(info->device, "preparing for 32 bit deep display\n");
+ else if (var->bits_per_pixel == 24) {
+ dev_dbg(info->device, "preparing for 24 bit deep display\n");
switch (cinfo->btype) {
- case BT_SD64:
- /* Extended Sequencer Mode: 256c col. mode */
- vga_wseq(regbase, CL_SEQR7, 0xf9);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1e);
- break;
-
case BT_PICCOLO:
case BT_SPECTRUM:
vga_wseq(regbase, CL_SEQR7, 0x85);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
case BT_PICASSO:
vga_wseq(regbase, CL_SEQR7, 0x25);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
+ case BT_SD64:
case BT_PICASSO4:
- vga_wseq(regbase, CL_SEQR7, 0x25);
-/* vga_wseq(regbase, CL_SEQR1F, 0x1c); */
- break;
-
case BT_ALPINE:
- vga_wseq(regbase, CL_SEQR7, 0xa9);
+ /* Extended Sequencer Mode: 256c col. mode */
+ vga_wseq(regbase, CL_SEQR7, 0xa5);
break;
case BT_GD5480:
- vga_wseq(regbase, CL_SEQR7, 0x19);
+ vga_wseq(regbase, CL_SEQR7, 0x15);
/* We already set SRF and SR1F */
break;
case BT_LAGUNA:
+ case BT_LAGUNAB:
vga_wseq(regbase, CL_SEQR7,
vga_rseq(regbase, CL_SEQR7) & ~0x01);
- control |= 0x6000;
- format |= 0x3400;
+ control |= 0x4000;
+ format |= 0x2400;
threshold |= 0x20;
break;
if (cirrusfb_board_info[cinfo->btype].scrn_start_bit19)
vga_wcrt(regbase, CL_CRT1D, (pitch >> 9) & 1);
- if (cinfo->btype == BT_LAGUNA ||
- cinfo->btype == BT_GD5480) {
-
+ if (is_laguna(cinfo)) {
tmp = 0;
if ((htotal + 5) & 256)
tmp |= 128;
dev_dbg(info->device, "CRT1e: %d\n", tmp);
}
-
/* pixel panning */
vga_wattr(regbase, CL_AR33, 0);
/* From SetOffset(): Turn on VideoEnable bit in Attribute controller */
AttrOn(cinfo);
- if (cinfo->btype == BT_LAGUNA) {
+ if (is_laguna(cinfo)) {
/* no tiles */
fb_writew(control | 0x1000, cinfo->laguna_mmio + 0x402);
fb_writew(format, cinfo->laguna_mmio + 0xc0);
vga_wseq(regbase, VGA_SEQ_CLOCK_MODE, tmp);
dev_dbg(info->device, "CL_SEQR1: %d\n", tmp);
- /* pan to requested offset */
- cirrusfb_pan_display(var, info);
-
#ifdef CIRRUSFB_DEBUG
cirrusfb_dbg_reg_dump(info, NULL);
#endif
static int cirrusfb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
- int xoffset = 0;
- int yoffset = 0;
+ int xoffset;
unsigned long base;
unsigned char tmp, xpix;
struct cirrusfb_info *cinfo = info->par;
- dev_dbg(info->device,
- "virtual offset: (%d,%d)\n", var->xoffset, var->yoffset);
-
/* no range checks for xoffset and yoffset, */
/* as fb_pan_display has already done this */
if (var->vmode & FB_VMODE_YWRAP)
return -EINVAL;
xoffset = var->xoffset * info->var.bits_per_pixel / 8;
- yoffset = var->yoffset;
- base = yoffset * info->fix.line_length + xoffset;
+ base = var->yoffset * info->fix.line_length + xoffset;
if (info->var.bits_per_pixel == 1) {
/* base is already correct */
xpix = (unsigned char) ((xoffset % 4) * 2);
}
- cirrusfb_WaitBLT(cinfo->regbase); /* make sure all the BLT's are done */
+ if (!is_laguna(cinfo))
+ cirrusfb_WaitBLT(cinfo->regbase);
/* lower 8 + 8 bits of screen start address */
- vga_wcrt(cinfo->regbase, VGA_CRTC_START_LO,
- (unsigned char) (base & 0xff));
- vga_wcrt(cinfo->regbase, VGA_CRTC_START_HI,
- (unsigned char) (base >> 8));
+ vga_wcrt(cinfo->regbase, VGA_CRTC_START_LO, base & 0xff);
+ vga_wcrt(cinfo->regbase, VGA_CRTC_START_HI, (base >> 8) & 0xff);
/* 0xf2 is %11110010, exclude tmp bits */
tmp = vga_rcrt(cinfo->regbase, CL_CRT1B) & 0xf2;
/* construct bit 19 of screen start address */
if (cirrusfb_board_info[cinfo->btype].scrn_start_bit19) {
- tmp = vga_rcrt(cinfo->regbase, CL_CRT1D) & ~0x80;
- tmp |= (base >> 12) & 0x80;
+ tmp = vga_rcrt(cinfo->regbase, CL_CRT1D);
+ if (is_laguna(cinfo))
+ tmp = (tmp & ~0x18) | ((base >> 16) & 0x18);
+ else
+ tmp = (tmp & ~0x80) | ((base >> 12) & 0x80);
vga_wcrt(cinfo->regbase, CL_CRT1D, tmp);
}
if (info->var.bits_per_pixel == 1)
vga_wattr(cinfo->regbase, CL_AR33, xpix);
- cirrusfb_WaitBLT(cinfo->regbase);
-
return 0;
}
/* disable flickerfixer */
vga_wcrt(cinfo->regbase, CL_CRT51, 0x00);
mdelay(100);
- /* from Klaus' NetBSD driver: */
- vga_wgfx(cinfo->regbase, CL_GR2F, 0x00);
- /* put blitter into 542x compat */
- vga_wgfx(cinfo->regbase, CL_GR33, 0x00);
/* mode */
vga_wgfx(cinfo->regbase, CL_GR31, 0x00);
- break;
-
- case BT_GD5480:
+ case BT_GD5480: /* fall through */
/* from Klaus' NetBSD driver: */
vga_wgfx(cinfo->regbase, CL_GR2F, 0x00);
+ case BT_ALPINE: /* fall through */
+ /* put blitter into 542x compat */
+ vga_wgfx(cinfo->regbase, CL_GR33, 0x00);
break;
- case BT_ALPINE:
+ case BT_LAGUNA:
+ case BT_LAGUNAB:
/* Nothing to do to reset the board. */
break;
WGen(cinfo, CL_VSSM2, 0x01);
/* reset sequencer logic */
- vga_wseq(cinfo->regbase, CL_SEQR0, 0x03);
+ vga_wseq(cinfo->regbase, VGA_SEQ_RESET, 0x03);
/* FullBandwidth (video off) and 8/9 dot clock */
vga_wseq(cinfo->regbase, VGA_SEQ_CLOCK_MODE, 0x21);
- /* polarity (-/-), disable access to display memory,
- * VGA_CRTC_START_HI base address: color
- */
- WGen(cinfo, VGA_MIS_W, 0xc1);
/* "magic cookie" - doesn't make any sense to me.. */
/* vga_wgfx(cinfo->regbase, CL_GRA, 0xce); */
/* unlock all extension registers */
vga_wseq(cinfo->regbase, CL_SEQR6, 0x12);
- /* reset blitter */
- vga_wgfx(cinfo->regbase, CL_GR31, 0x04);
-
switch (cinfo->btype) {
case BT_GD5480:
vga_wseq(cinfo->regbase, CL_SEQRF, 0x98);
break;
case BT_ALPINE:
+ case BT_LAGUNA:
+ case BT_LAGUNAB:
break;
case BT_SD64:
+#ifdef CONFIG_ZORRO
vga_wseq(cinfo->regbase, CL_SEQRF, 0xb8);
+#endif
break;
default:
vga_wseq(cinfo->regbase, CL_SEQR16, 0x0f);
vga_wseq(cinfo->regbase, CL_SEQR18, 0x02);
}
- /* MCLK select etc. */
- if (bi->init_sr1f)
- vga_wseq(cinfo->regbase, CL_SEQR1F, bi->sr1f);
-
/* Screen A preset row scan: none */
vga_wcrt(cinfo->regbase, VGA_CRTC_PRESET_ROW, 0x00);
/* Text cursor start: disable text cursor */
vga_wcrt(cinfo->regbase, VGA_CRTC_CURSOR_START, 0x20);
/* Text cursor end: - */
vga_wcrt(cinfo->regbase, VGA_CRTC_CURSOR_END, 0x00);
- /* Screen start address high: 0 */
- vga_wcrt(cinfo->regbase, VGA_CRTC_START_HI, 0x00);
- /* Screen start address low: 0 */
- vga_wcrt(cinfo->regbase, VGA_CRTC_START_LO, 0x00);
/* text cursor location high: 0 */
vga_wcrt(cinfo->regbase, VGA_CRTC_CURSOR_HI, 0x00);
/* text cursor location low: 0 */
/* Underline Row scanline: - */
vga_wcrt(cinfo->regbase, VGA_CRTC_UNDERLINE, 0x00);
- /* mode control: timing enable, byte mode, no compat modes */
- vga_wcrt(cinfo->regbase, VGA_CRTC_MODE, 0xc3);
- /* Line Compare: not needed */
- vga_wcrt(cinfo->regbase, VGA_CRTC_LINE_COMPARE, 0x00);
/* ### add 0x40 for text modes with > 30 MHz pixclock */
/* ext. display controls: ext.adr. wrap */
vga_wcrt(cinfo->regbase, CL_CRT1B, 0x02);
vga_wgfx(cinfo->regbase, VGA_GFX_COMPARE_MASK, 0x0f);
/* Bit Mask: no mask at all */
vga_wgfx(cinfo->regbase, VGA_GFX_BIT_MASK, 0xff);
- if (cinfo->btype == BT_ALPINE)
+
+ if (cinfo->btype == BT_ALPINE || cinfo->btype == BT_SD64 ||
+ is_laguna(cinfo))
/* (5434 can't have bit 3 set for bitblt) */
vga_wgfx(cinfo->regbase, CL_GRB, 0x20);
else
WGen(cinfo, VGA_PEL_MSK, 0xff); /* Pixel mask: no mask */
- if (cinfo->btype != BT_ALPINE && cinfo->btype != BT_GD5480)
- /* polarity (-/-), enable display mem,
- * VGA_CRTC_START_HI i/o base = color
- */
- WGen(cinfo, VGA_MIS_W, 0xc3);
-
/* BLT Start/status: Blitter reset */
vga_wgfx(cinfo->regbase, CL_GR31, 0x04);
/* - " - : "end-of-reset" */
/* Linux 2.6-style accelerated functions */
/******************************************/
+static int cirrusfb_sync(struct fb_info *info)
+{
+ struct cirrusfb_info *cinfo = info->par;
+
+ if (!is_laguna(cinfo)) {
+ while (vga_rgfx(cinfo->regbase, CL_GR31) & 0x03)
+ cpu_relax();
+ }
+ return 0;
+}
+
static void cirrusfb_fillrect(struct fb_info *info,
const struct fb_fillrect *region)
{
info->var.bits_per_pixel,
(region->dx * m) / 8, region->dy,
(region->width * m) / 8, region->height,
- color,
- info->fix.line_length);
+ color, color,
+ info->fix.line_length, 0x40);
}
static void cirrusfb_copyarea(struct fb_info *info,
const struct fb_image *image)
{
struct cirrusfb_info *cinfo = info->par;
+ unsigned char op = (info->var.bits_per_pixel == 24) ? 0xc : 0x4;
- cirrusfb_WaitBLT(cinfo->regbase);
- cfb_imageblit(info, image);
+ if (info->state != FBINFO_STATE_RUNNING)
+ return;
+ /* Alpine/SD64 does not work at 24bpp ??? */
+ if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1)
+ cfb_imageblit(info, image);
+ else if ((cinfo->btype == BT_ALPINE || cinfo->btype == BT_SD64) &&
+ op == 0xc)
+ cfb_imageblit(info, image);
+ else {
+ unsigned size = ((image->width + 7) >> 3) * image->height;
+ int m = info->var.bits_per_pixel;
+ u32 fg, bg;
+
+ if (info->var.bits_per_pixel == 8) {
+ fg = image->fg_color;
+ bg = image->bg_color;
+ } else {
+ fg = ((u32 *)(info->pseudo_palette))[image->fg_color];
+ bg = ((u32 *)(info->pseudo_palette))[image->bg_color];
+ }
+ if (info->var.bits_per_pixel == 24) {
+ /* clear background first */
+ cirrusfb_RectFill(cinfo->regbase,
+ info->var.bits_per_pixel,
+ (image->dx * m) / 8, image->dy,
+ (image->width * m) / 8,
+ image->height,
+ bg, bg,
+ info->fix.line_length, 0x40);
+ }
+ cirrusfb_RectFill(cinfo->regbase,
+ info->var.bits_per_pixel,
+ (image->dx * m) / 8, image->dy,
+ (image->width * m) / 8, image->height,
+ fg, bg,
+ info->fix.line_length, op);
+ memcpy(info->screen_base, image->data, size);
+ }
}
#ifdef CONFIG_PPC_PREP
unsigned long mem;
struct cirrusfb_info *cinfo = info->par;
- if (cinfo->btype == BT_LAGUNA) {
+ if (is_laguna(cinfo)) {
unsigned char SR14 = vga_rseq(regbase, CL_SEQR14);
mem = ((SR14 & 7) + 1) << 20;
/* If DRAM bank switching is enabled, there must be
* twice as much memory installed. (4MB on the 5434)
*/
- if (SRF & 0x80)
+ if (cinfo->btype != BT_ALPINE && (SRF & 0x80) != 0)
mem *= 2;
}
.fb_blank = cirrusfb_blank,
.fb_fillrect = cirrusfb_fillrect,
.fb_copyarea = cirrusfb_copyarea,
+ .fb_sync = cirrusfb_sync,
.fb_imageblit = cirrusfb_imageblit,
};
| FBINFO_HWACCEL_XPAN
| FBINFO_HWACCEL_YPAN
| FBINFO_HWACCEL_FILLRECT
+ | FBINFO_HWACCEL_IMAGEBLIT
| FBINFO_HWACCEL_COPYAREA;
- if (noaccel)
+ if (noaccel || is_laguna(cinfo)) {
info->flags |= FBINFO_HWACCEL_DISABLED;
+ info->fix.accel = FB_ACCEL_NONE;
+ } else
+ info->fix.accel = FB_ACCEL_CIRRUS_ALPINE;
+
info->fbops = &cirrusfb_ops;
+
if (cinfo->btype == BT_GD5480) {
if (var->bits_per_pixel == 16)
info->screen_base += 1 * MB_;
/* FIXME: map region at 0xB8000 if available, fill in here */
info->fix.mmio_len = 0;
- info->fix.accel = FB_ACCEL_NONE;
fb_alloc_cmap(&info->cmap, 256, 0);
info->var.activate = FB_ACTIVATE_NOW;
- err = cirrusfb_decode_var(&info->var, info);
+ err = cirrusfb_check_var(&info->var, info);
if (err < 0) {
/* should never happen */
dev_dbg(info->device,
err_dealloc_cmap:
fb_dealloc_cmap(&info->cmap);
- cinfo->unmap(info);
- framebuffer_release(info);
return err;
}
if (!info) {
printk(KERN_ERR "cirrusfb: could not allocate memory\n");
ret = -ENOMEM;
- goto err_disable;
+ goto err_out;
}
cinfo = info->par;
pci_set_drvdata(pdev, info);
ret = cirrusfb_register(info);
- if (ret)
- iounmap(info->screen_base);
- return ret;
+ if (!ret)
+ return 0;
+ pci_set_drvdata(pdev, NULL);
+ iounmap(info->screen_base);
err_release_legacy:
if (release_io_ports)
release_region(0x3C0, 32);
#endif
pci_release_regions(pdev);
err_release_fb:
- if (cinfo->laguna_mmio == NULL)
+ if (cinfo->laguna_mmio != NULL)
iounmap(cinfo->laguna_mmio);
framebuffer_release(info);
-err_disable:
err_out:
return ret;
}
zorro_set_drvdata(z, info);
+ /* MCLK select etc. */
+ if (cirrusfb_board_info[btype].init_sr1f)
+ vga_wseq(cinfo->regbase, CL_SEQR1F,
+ cirrusfb_board_info[btype].sr1f);
+
ret = cirrusfb_register(info);
- if (ret) {
- if (btype == BT_PICASSO4) {
- iounmap(info->screen_base);
- iounmap(cinfo->regbase - 0x600000);
- } else if (board_addr > 0x01000000)
- iounmap(info->screen_base);
- }
- return ret;
+ if (!ret)
+ return 0;
+
+ if (btype == BT_PICASSO4 || board_addr > 0x01000000)
+ iounmap(info->screen_base);
err_unmap_regbase:
- /* Parental advisory: explicit hack */
- iounmap(cinfo->regbase - 0x600000);
+ if (btype == BT_PICASSO4)
+ iounmap(cinfo->regbase - 0x600000);
err_release_region:
release_region(board_addr, board_size);
err_release_fb:
{
unsigned char dummy;
+ if (is_laguna(cinfo))
+ return;
if (cinfo->btype == BT_PICASSO) {
/* Klaus' hint for correct access to HDR on some boards */
/* first write 0 to pixel mask (3c6) */
vga_w(cinfo->regbase, VGA_PEL_IW, regnum);
if (cinfo->btype == BT_PICASSO || cinfo->btype == BT_PICASSO4 ||
- cinfo->btype == BT_ALPINE || cinfo->btype == BT_GD5480) {
+ cinfo->btype == BT_ALPINE || cinfo->btype == BT_GD5480 ||
+ cinfo->btype == BT_SD64 || is_laguna(cinfo)) {
/* but DAC data register IS, at least for Picasso II */
if (cinfo->btype == BT_PICASSO)
data += 0xfff;
/* FIXME: use interrupts instead */
static void cirrusfb_WaitBLT(u8 __iomem *regbase)
{
- /* now busy-wait until we're done */
while (vga_rgfx(regbase, CL_GR31) & 0x08)
cpu_relax();
}
perform accelerated "scrolling"
********************************************************************/
-static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel,
- u_short curx, u_short cury,
- u_short destx, u_short desty,
- u_short width, u_short height,
- u_short line_length)
-{
- u_short nwidth, nheight;
- u_long nsrc, ndest;
- u_char bltmode;
-
- nwidth = width - 1;
- nheight = height - 1;
-
- bltmode = 0x00;
- /* if source adr < dest addr, do the Blt backwards */
- if (cury <= desty) {
- if (cury == desty) {
- /* if src and dest are on the same line, check x */
- if (curx < destx)
- bltmode |= 0x01;
- } else
- bltmode |= 0x01;
- }
- if (!bltmode) {
- /* standard case: forward blitting */
- nsrc = (cury * line_length) + curx;
- ndest = (desty * line_length) + destx;
- } else {
- /* this means start addresses are at the end,
- * counting backwards
- */
- nsrc = cury * line_length + curx +
- nheight * line_length + nwidth;
- ndest = desty * line_length + destx +
- nheight * line_length + nwidth;
- }
-
- /*
- run-down of registers to be programmed:
- destination pitch
- source pitch
- BLT width/height
- source start
- destination start
- BLT mode
- BLT ROP
- VGA_GFX_SR_VALUE / VGA_GFX_SR_ENABLE: "fill color"
- start/stop
- */
-
- cirrusfb_WaitBLT(regbase);
+static void cirrusfb_set_blitter(u8 __iomem *regbase,
+ u_short nwidth, u_short nheight,
+ u_long nsrc, u_long ndest,
+ u_short bltmode, u_short line_length)
+{
/* pitch: set to line_length */
/* dest pitch low */
vga_wgfx(regbase, CL_GR24, line_length & 0xff);
}
/*******************************************************************
- cirrusfb_RectFill()
+ cirrusfb_BitBLT()
- perform accelerated rectangle fill
+ perform accelerated "scrolling"
********************************************************************/
-static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel,
- u_short x, u_short y, u_short width, u_short height,
- u_char color, u_short line_length)
+static void cirrusfb_BitBLT(u8 __iomem *regbase, int bits_per_pixel,
+ u_short curx, u_short cury,
+ u_short destx, u_short desty,
+ u_short width, u_short height,
+ u_short line_length)
{
- u_short nwidth, nheight;
- u_long ndest;
- u_char op;
-
- nwidth = width - 1;
- nheight = height - 1;
+ u_short nwidth = width - 1;
+ u_short nheight = height - 1;
+ u_long nsrc, ndest;
+ u_char bltmode;
- ndest = (y * line_length) + x;
+ bltmode = 0x00;
+ /* if source adr < dest addr, do the Blt backwards */
+ if (cury <= desty) {
+ if (cury == desty) {
+ /* if src and dest are on the same line, check x */
+ if (curx < destx)
+ bltmode |= 0x01;
+ } else
+ bltmode |= 0x01;
+ }
+ /* standard case: forward blitting */
+ nsrc = (cury * line_length) + curx;
+ ndest = (desty * line_length) + destx;
+ if (bltmode) {
+ /* this means start addresses are at the end,
+ * counting backwards
+ */
+ nsrc += nheight * line_length + nwidth;
+ ndest += nheight * line_length + nwidth;
+ }
cirrusfb_WaitBLT(regbase);
- /* pitch: set to line_length */
- vga_wgfx(regbase, CL_GR24, line_length & 0xff); /* dest pitch low */
- vga_wgfx(regbase, CL_GR25, line_length >> 8); /* dest pitch hi */
- vga_wgfx(regbase, CL_GR26, line_length & 0xff); /* source pitch low */
- vga_wgfx(regbase, CL_GR27, line_length >> 8); /* source pitch hi */
+ cirrusfb_set_blitter(regbase, nwidth, nheight,
+ nsrc, ndest, bltmode, line_length);
+}
- /* BLT width: actual number of pixels - 1 */
- vga_wgfx(regbase, CL_GR20, nwidth & 0xff); /* BLT width low */
- vga_wgfx(regbase, CL_GR21, nwidth >> 8); /* BLT width hi */
+/*******************************************************************
+ cirrusfb_RectFill()
- /* BLT height: actual number of lines -1 */
- vga_wgfx(regbase, CL_GR22, nheight & 0xff); /* BLT height low */
- vga_wgfx(regbase, CL_GR23, nheight >> 8); /* BLT width hi */
+ perform accelerated rectangle fill
+********************************************************************/
- /* BLT destination */
- /* BLT dest low */
- vga_wgfx(regbase, CL_GR28, (u_char) (ndest & 0xff));
- /* BLT dest mid */
- vga_wgfx(regbase, CL_GR29, (u_char) (ndest >> 8));
- /* BLT dest hi */
- vga_wgfx(regbase, CL_GR2A, (u_char) (ndest >> 16));
+static void cirrusfb_RectFill(u8 __iomem *regbase, int bits_per_pixel,
+ u_short x, u_short y, u_short width, u_short height,
+ u32 fg_color, u32 bg_color, u_short line_length,
+ u_char blitmode)
+{
+ u_long ndest = (y * line_length) + x;
+ u_char op;
- /* BLT source: set to 0 (is a dummy here anyway) */
- vga_wgfx(regbase, CL_GR2C, 0x00); /* BLT src low */
- vga_wgfx(regbase, CL_GR2D, 0x00); /* BLT src mid */
- vga_wgfx(regbase, CL_GR2E, 0x00); /* BLT src hi */
+ cirrusfb_WaitBLT(regbase);
/* This is a ColorExpand Blt, using the */
/* same color for foreground and background */
- vga_wgfx(regbase, VGA_GFX_SR_VALUE, color); /* foreground color */
- vga_wgfx(regbase, VGA_GFX_SR_ENABLE, color); /* background color */
-
- op = 0xc0;
- if (bits_per_pixel == 16) {
- vga_wgfx(regbase, CL_GR10, color); /* foreground color */
- vga_wgfx(regbase, CL_GR11, color); /* background color */
- op = 0x50;
- op = 0xd0;
- } else if (bits_per_pixel == 32) {
- vga_wgfx(regbase, CL_GR10, color); /* foreground color */
- vga_wgfx(regbase, CL_GR11, color); /* background color */
- vga_wgfx(regbase, CL_GR12, color); /* foreground color */
- vga_wgfx(regbase, CL_GR13, color); /* background color */
- vga_wgfx(regbase, CL_GR14, 0); /* foreground color */
- vga_wgfx(regbase, CL_GR15, 0); /* background color */
- op = 0x50;
- op = 0xf0;
- }
- /* BLT mode: color expand, Enable 8x8 copy (faster?) */
- vga_wgfx(regbase, CL_GR30, op); /* BLT mode */
-
- /* BLT ROP: SrcCopy */
- vga_wgfx(regbase, CL_GR32, 0x0d); /* BLT ROP */
-
- /* and finally: GO! */
- vga_wgfx(regbase, CL_GR31, 0x02); /* BLT Start/status */
+ vga_wgfx(regbase, VGA_GFX_SR_VALUE, bg_color);
+ vga_wgfx(regbase, VGA_GFX_SR_ENABLE, fg_color);
+
+ op = 0x80;
+ if (bits_per_pixel >= 16) {
+ vga_wgfx(regbase, CL_GR10, bg_color >> 8);
+ vga_wgfx(regbase, CL_GR11, fg_color >> 8);
+ op = 0x90;
+ }
+ if (bits_per_pixel >= 24) {
+ vga_wgfx(regbase, CL_GR12, bg_color >> 16);
+ vga_wgfx(regbase, CL_GR13, fg_color >> 16);
+ op = 0xa0;
+ }
+ if (bits_per_pixel == 32) {
+ vga_wgfx(regbase, CL_GR14, bg_color >> 24);
+ vga_wgfx(regbase, CL_GR15, fg_color >> 24);
+ op = 0xb0;
+ }
+ cirrusfb_set_blitter(regbase, width - 1, height - 1,
+ 0, ndest, op | blitmode, line_length);
}
/**************************************************************************