.scrn_start_bit19 = true,
.sr07 = 0xF0,
.sr07_1bpp = 0xF0,
+ .sr07_1bpp_mux = 0xF6,
.sr07_8bpp = 0xF1,
- .sr1f = 0x20
+ .sr07_8bpp_mux = 0xF7,
+ .sr1f = 0x1E
},
[BT_PICCOLO] = {
.name = "CL Piccolo",
static struct pci_device_id cirrusfb_pci_table[] = {
CHIP(PCI_DEVICE_ID_CIRRUS_5436, BT_ALPINE),
- CHIP(PCI_DEVICE_ID_CIRRUS_5434_8, BT_ALPINE),
- CHIP(PCI_DEVICE_ID_CIRRUS_5434_4, BT_ALPINE),
+ CHIP(PCI_DEVICE_ID_CIRRUS_5434_8, BT_SD64),
+ CHIP(PCI_DEVICE_ID_CIRRUS_5434_4, BT_SD64),
CHIP(PCI_DEVICE_ID_CIRRUS_5430, BT_ALPINE), /* GD-5440 is same id */
CHIP(PCI_DEVICE_ID_CIRRUS_7543, BT_ALPINE),
CHIP(PCI_DEVICE_ID_CIRRUS_7548, BT_ALPINE),
unsigned char SFR; /* Shadow of special function register */
int multiplexing;
+ int doubleVCLK;
int blank_mode;
u32 pseudo_palette[16];
/* If the frequency is greater than we can support, we might be able
* to use multiplexing for the video mode */
if (freq > maxclock) {
+ dev_err(info->device,
+ "Frequency greater than maxclock (%ld kHz)\n",
+ maxclock);
+ return -EINVAL;
+ }
+ /*
+ * Additional constraint: 8bpp uses DAC clock doubling to allow maximum
+ * pixel clock
+ */
+ if (var->bits_per_pixel == 8) {
switch (cinfo->btype) {
case BT_ALPINE:
+ case BT_SD64:
+ case BT_PICASSO4:
+ if (freq > 85500)
+ cinfo->multiplexing = 1;
+ break;
case BT_GD5480:
- cinfo->multiplexing = 1;
+ if (freq > 135100)
+ cinfo->multiplexing = 1;
break;
default:
- dev_err(info->device,
- "Frequency greater than maxclock (%ld kHz)\n",
- maxclock);
- return -EINVAL;
+ break;
}
}
-#if 0
- /* TODO: If we have a 1MB 5434, we need to put ourselves in a mode where
+
+ /* If we have a 1MB 5434, we need to put ourselves in a mode where
* the VCLK is double the pixel clock. */
- switch (var->bits_per_pixel) {
- case 16:
- case 24:
- if (var->xres <= 800)
- /* Xbh has this type of clock for 32-bit */
- freq /= 2;
- break;
+ cinfo->doubleVCLK = 0;
+ if (cinfo->btype == BT_SD64 && info->fix.smem_len <= MB_ &&
+ var->bits_per_pixel == 16) {
+ cinfo->doubleVCLK = 1;
}
-#endif
+
return 0;
}
int yres;
/* memory size in pixels */
unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
+ struct cirrusfb_info *cinfo = info->par;
switch (var->bits_per_pixel) {
case 1:
default:
dev_dbg(info->device,
"Unsupported bpp size: %d\n", var->bits_per_pixel);
- assert(false);
- /* should never occur */
- break;
+ return -EINVAL;
}
if (var->xres_virtual < var->xres)
if (cirrusfb_check_pixclock(var, info))
return -EINVAL;
+ if (!is_laguna(cinfo))
+ var->accel_flags = FB_ACCELF_TEXT;
+
return 0;
}
hsyncstart = var->xres + var->right_margin;
hsyncend = hsyncstart + var->hsync_len;
- htotal = (hsyncend + var->left_margin) / 8 - 5;
- hdispend = var->xres / 8 - 1;
- hsyncstart = hsyncstart / 8 + 1;
- hsyncend = hsyncend / 8 + 1;
+ htotal = (hsyncend + var->left_margin) / 8;
+ hdispend = var->xres / 8;
+ hsyncstart = hsyncstart / 8;
+ hsyncend = hsyncend / 8;
- yres = var->yres;
- vsyncstart = yres + var->lower_margin;
+ vdispend = var->yres;
+ vsyncstart = vdispend + var->lower_margin;
vsyncend = vsyncstart + var->vsync_len;
vtotal = vsyncend + var->upper_margin;
- vdispend = yres - 1;
if (var->vmode & FB_VMODE_DOUBLE) {
- yres *= 2;
+ vdispend *= 2;
vsyncstart *= 2;
vsyncend *= 2;
vtotal *= 2;
} else if (var->vmode & FB_VMODE_INTERLACED) {
- yres = (yres + 1) / 2;
+ vdispend = (vdispend + 1) / 2;
vsyncstart = (vsyncstart + 1) / 2;
vsyncend = (vsyncend + 1) / 2;
vtotal = (vtotal + 1) / 2;
}
-
- vtotal -= 2;
- vsyncstart -= 1;
- vsyncend -= 1;
-
+ yres = vdispend;
if (yres >= 1024) {
vtotal /= 2;
vsyncstart /= 2;
vsyncend /= 2;
vdispend /= 2;
}
+
+ vdispend -= 1;
+ vsyncstart -= 1;
+ vsyncend -= 1;
+ vtotal -= 2;
+
if (cinfo->multiplexing) {
htotal /= 2;
hsyncstart /= 2;
hsyncend /= 2;
hdispend /= 2;
}
+
+ htotal -= 5;
+ hdispend -= 1;
+ hsyncstart += 1;
+ hsyncend += 1;
+
/* unlock register VGA_CRTC_H_TOTAL..CRT7 */
vga_wcrt(regbase, VGA_CRTC_V_SYNC_END, 0x20); /* previously: 0x00) */
vga_wcrt(regbase, CL_CRT1A, tmp);
freq = PICOS2KHZ(var->pixclock);
- if (cinfo->btype == BT_ALPINE && var->bits_per_pixel == 24)
- freq *= 3;
+ if (var->bits_per_pixel == 24)
+ if (cinfo->btype == BT_ALPINE || cinfo->btype == BT_SD64)
+ freq *= 3;
+ if (cinfo->multiplexing)
+ freq /= 2;
+ if (cinfo->doubleVCLK)
+ freq *= 2;
bestclock(freq, &nom, &den, &div);
/* formula: VClk = (OSC * N) / (D * (1+P)) */
/* Example: VClk = (14.31818 * 91) / (23 * (1+1)) = 28.325 MHz */
- if (cinfo->btype == BT_ALPINE || cinfo->btype == BT_PICASSO4) {
+ if (cinfo->btype == BT_ALPINE || cinfo->btype == BT_PICASSO4 ||
+ cinfo->btype == BT_SD64) {
/* if freq is close to mclk or mclk/2 select mclk
* as clock source
*/
int divMCLK = cirrusfb_check_mclk(info, freq);
- if (divMCLK) {
+ if (divMCLK)
nom = 0;
- cirrusfb_set_mclk_as_source(info, divMCLK);
- }
+ cirrusfb_set_mclk_as_source(info, divMCLK);
}
if (is_laguna(cinfo)) {
long pcifc = fb_readl(cinfo->laguna_mmio + 0x3fc);
threshold = fb_readw(cinfo->laguna_mmio + 0xea);
control &= ~0x6800;
format = 0;
- threshold &= 0xffe0 & 0x3fbf;
+ threshold &= 0xffc0 & 0x3fbf;
}
if (nom) {
tmp = den << 1;
(cinfo->btype == BT_GD5480))
tmp |= 0x80;
- dev_dbg(info->device, "CL_SEQR1B: %d\n", (int) tmp);
/* Laguna chipset has reversed clock registers */
if (is_laguna(cinfo)) {
vga_wseq(regbase, CL_SEQRE, tmp);
vga_wseq(regbase, CL_SEQR1E, nom);
} else {
- vga_wseq(regbase, CL_SEQRB, nom);
- vga_wseq(regbase, CL_SEQR1B, tmp);
+ vga_wseq(regbase, CL_SEQRE, nom);
+ vga_wseq(regbase, CL_SEQR1E, tmp);
}
}
else
vga_wcrt(regbase, VGA_CRTC_REGS, 0x00); /* interlace control */
- /* adjust horizontal/vertical sync type (low/high) */
+ /* adjust horizontal/vertical sync type (low/high), use VCLK3 */
/* enable display memory & CRTC I/O address for color mode */
- tmp = 0x03;
+ tmp = 0x03 | 0xc;
if (var->sync & FB_SYNC_HOR_HIGH_ACT)
tmp |= 0x40;
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
tmp |= 0x80;
- if (is_laguna(cinfo))
- tmp |= 0xc;
WGen(cinfo, VGA_MIS_W, tmp);
/* text cursor on and start line */
/* Extended Sequencer Mode */
switch (cinfo->btype) {
- case BT_SD64:
- /* setting the SEQRF on SD64 is not necessary
- * (only during init)
- */
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1a);
- break;
case BT_PICCOLO:
case BT_SPECTRUM:
- /* ### ueberall 0x22? */
- /* ##vorher 1c MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
/* evtl d0 bei 1 bit? avoid FIFO underruns..? */
vga_wseq(regbase, CL_SEQRF, 0xb0);
break;
case BT_PICASSO:
- /* ##vorher 22 MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
/* ## vorher d0 avoid FIFO underruns..? */
vga_wseq(regbase, CL_SEQRF, 0xd0);
break;
+ case BT_SD64:
case BT_PICASSO4:
case BT_ALPINE:
case BT_GD5480:
}
switch (cinfo->btype) {
- case BT_SD64:
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1d);
- break;
-
case BT_PICCOLO:
case BT_PICASSO:
case BT_SPECTRUM:
- /* ### vorher 1c MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
break;
vga_wseq(regbase, CL_SEQRF, 0xb8);
#endif
case BT_ALPINE:
- /* We already set SRF and SR1F */
- break;
-
+ case BT_SD64:
case BT_GD5480:
case BT_LAGUNA:
case BT_LAGUNAB:
else if (var->bits_per_pixel == 16) {
dev_dbg(info->device, "preparing for 16 bit deep display\n");
switch (cinfo->btype) {
- case BT_SD64:
- /* Extended Sequencer Mode: 256c col. mode */
- vga_wseq(regbase, CL_SEQR7, 0xf7);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1e);
- break;
-
case BT_PICCOLO:
case BT_SPECTRUM:
vga_wseq(regbase, CL_SEQR7, 0x87);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
case BT_PICASSO:
vga_wseq(regbase, CL_SEQR7, 0x27);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
+ case BT_SD64:
case BT_PICASSO4:
case BT_ALPINE:
- vga_wseq(regbase, CL_SEQR7, 0xa7);
+ /* Extended Sequencer Mode: 256c col. mode */
+ vga_wseq(regbase, CL_SEQR7,
+ cinfo->doubleVCLK ? 0xa3 : 0xa7);
break;
case BT_GD5480:
/* mode register: 256 color mode */
vga_wgfx(regbase, VGA_GFX_MODE, 64);
#ifdef CONFIG_PCI
- WHDR(cinfo, 0xc1); /* Copy Xbh */
+ WHDR(cinfo, cinfo->doubleVCLK ? 0xe1 : 0xc1);
#elif defined(CONFIG_ZORRO)
/* FIXME: CONFIG_PCI and CONFIG_ZORRO may be defined both */
WHDR(cinfo, 0xa0); /* hidden dac reg: nothing special */
else if (var->bits_per_pixel == 24) {
dev_dbg(info->device, "preparing for 24 bit deep display\n");
switch (cinfo->btype) {
- case BT_SD64:
- /* Extended Sequencer Mode: 256c col. mode */
- vga_wseq(regbase, CL_SEQR7, 0xf5);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x1e);
- break;
-
case BT_PICCOLO:
case BT_SPECTRUM:
vga_wseq(regbase, CL_SEQR7, 0x85);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
case BT_PICASSO:
vga_wseq(regbase, CL_SEQR7, 0x25);
/* Fast Page-Mode writes */
vga_wseq(regbase, CL_SEQRF, 0xb0);
- /* MCLK select */
- vga_wseq(regbase, CL_SEQR1F, 0x22);
break;
+ case BT_SD64:
case BT_PICASSO4:
case BT_ALPINE:
+ /* Extended Sequencer Mode: 256c col. mode */
vga_wseq(regbase, CL_SEQR7, 0xa5);
break;
unsigned char tmp, xpix;
struct cirrusfb_info *cinfo = info->par;
- dev_dbg(info->device,
- "virtual offset: (%d,%d)\n", var->xoffset, var->yoffset);
-
/* no range checks for xoffset and yoffset, */
/* as fb_pan_display has already done this */
if (var->vmode & FB_VMODE_YWRAP)
case BT_LAGUNAB:
break;
case BT_SD64:
+#ifdef CONFIG_ZORRO
vga_wseq(cinfo->regbase, CL_SEQRF, 0xb8);
+#endif
break;
default:
vga_wseq(cinfo->regbase, CL_SEQR16, 0x0f);
vga_wseq(cinfo->regbase, CL_SEQR18, 0x02);
}
- /* MCLK select etc. */
- if (bi->init_sr1f)
- vga_wseq(cinfo->regbase, CL_SEQR1F, bi->sr1f);
-
/* Screen A preset row scan: none */
vga_wcrt(cinfo->regbase, VGA_CRTC_PRESET_ROW, 0x00);
/* Text cursor start: disable text cursor */
/* Bit Mask: no mask at all */
vga_wgfx(cinfo->regbase, VGA_GFX_BIT_MASK, 0xff);
- if (cinfo->btype == BT_ALPINE || is_laguna(cinfo))
+ if (cinfo->btype == BT_ALPINE || cinfo->btype == BT_SD64 ||
+ is_laguna(cinfo))
/* (5434 can't have bit 3 set for bitblt) */
vga_wgfx(cinfo->regbase, CL_GRB, 0x20);
else
if (info->state != FBINFO_STATE_RUNNING)
return;
- /* Alpine acceleration does not work at 24bpp ?!? */
- if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1 ||
- (cinfo->btype == BT_ALPINE && op == 0xc))
+ /* Alpine/SD64 does not work at 24bpp ??? */
+ if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1)
+ cfb_imageblit(info, image);
+ else if ((cinfo->btype == BT_ALPINE || cinfo->btype == BT_SD64) &&
+ op == 0xc)
cfb_imageblit(info, image);
else {
unsigned size = ((image->width + 7) >> 3) * image->height;
/* If DRAM bank switching is enabled, there must be
* twice as much memory installed. (4MB on the 5434)
*/
- if (SRF & 0x80)
+ if (cinfo->btype != BT_ALPINE && (SRF & 0x80) != 0)
mem *= 2;
}
| FBINFO_HWACCEL_FILLRECT
| FBINFO_HWACCEL_IMAGEBLIT
| FBINFO_HWACCEL_COPYAREA;
- if (noaccel || is_laguna(cinfo))
+ if (noaccel || is_laguna(cinfo)) {
info->flags |= FBINFO_HWACCEL_DISABLED;
+ info->fix.accel = FB_ACCEL_NONE;
+ } else
+ info->fix.accel = FB_ACCEL_CIRRUS_ALPINE;
+
info->fbops = &cirrusfb_ops;
if (cinfo->btype == BT_GD5480) {
/* FIXME: map region at 0xB8000 if available, fill in here */
info->fix.mmio_len = 0;
- info->fix.accel = FB_ACCEL_NONE;
fb_alloc_cmap(&info->cmap, 256, 0);
zorro_set_drvdata(z, info);
+ /* MCLK select etc. */
+ if (cirrusfb_board_info[btype].init_sr1f)
+ vga_wseq(cinfo->regbase, CL_SEQR1F,
+ cirrusfb_board_info[btype].sr1f);
+
ret = cirrusfb_register(info);
if (!ret)
return 0;
if (cinfo->btype == BT_PICASSO || cinfo->btype == BT_PICASSO4 ||
cinfo->btype == BT_ALPINE || cinfo->btype == BT_GD5480 ||
- is_laguna(cinfo)) {
+ cinfo->btype == BT_SD64 || is_laguna(cinfo)) {
/* but DAC data register IS, at least for Picasso II */
if (cinfo->btype == BT_PICASSO)
data += 0xfff;