#undef DEBUG
#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_DEBUG "aty128fb: %s " fmt, __FUNCTION__, ##args);
+#define DBG(fmt, args...) printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args);
#else
#define DBG(fmt, args...)
#endif
static int default_lcd_on __devinitdata = 1;
#ifdef CONFIG_MTRR
-static int mtrr = 1;
+static bool mtrr = true;
#endif
#ifdef CONFIG_PMAC_BACKLIGHT
if (vclk * 12 < c.ppll_min)
vclk = c.ppll_min/12;
- pll->post_divider = -1;
-
/* now, find an acceptable divider */
- for (i = 0; i < sizeof(post_dividers); i++) {
+ for (i = 0; i < ARRAY_SIZE(post_dividers); i++) {
output_freq = post_dividers[i] * vclk;
if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) {
pll->post_divider = post_dividers[i];
}
}
- if (pll->post_divider < 0)
+ if (i == ARRAY_SIZE(post_dividers))
return -EINVAL;
/* calculate feedback divider */
aty128_set_pll(&par->pll, par);
aty128_set_fifo(&par->fifo_reg, par);
- config = aty_ld_le32(CONFIG_CNTL) & ~3;
+ config = aty_ld_le32(CNFG_CNTL) & ~3;
#if defined(__BIG_ENDIAN)
if (par->crtc.bpp == 32)
config |= 1; /* make aperture do 16 bit swapping */
#endif
- aty_st_le32(CONFIG_CNTL, config);
+ aty_st_le32(CNFG_CNTL, config);
aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */
info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
* Initialisation
*/
-#ifdef CONFIG_PPC_PMAC
+#ifdef CONFIG_PPC_PMAC__disabled
static void aty128_early_resume(void *data)
{
struct aty128fb_par *par = data;
if (try_acquire_console_sem())
return;
+ pci_restore_state(par->pdev);
aty128_do_resume(par->pdev);
release_console_sem();
}
struct fb_info *info = pci_get_drvdata(pdev);
struct aty128fb_par *par = info->par;
struct fb_var_screeninfo var;
- char video_card[DEVICE_NAME_SIZE];
+ char video_card[50];
u8 chip_rev;
u32 dac;
/* Get the chip revision */
- chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F;
+ chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
strcpy(video_card, "Rage128 XX ");
video_card[8] = ent->device >> 8;
/* Indicate sleep capability */
if (par->chip_gen == rage_M3) {
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+#if 0 /* Disable the early video resume hack for now as it's causing problems, among
+ * others we now rely on the PCI core restoring the config space for us, which
+ * isn't the case with that hack, and that code path causes various things to
+ * be called with interrupts off while they shouldn't. I'm leaving the code in
+ * as it can be useful for debugging purposes
+ */
pmac_set_early_video_resume(aty128_early_resume, par);
+#endif
}
/* Find default mode */
/* Virtualize mmio region */
info->fix.mmio_start = reg_addr;
- par->regbase = ioremap(reg_addr, pci_resource_len(pdev, 2));
+ par->regbase = pci_ioremap_bar(pdev, 2);
if (!par->regbase)
goto err_free_info;
/* Grab memory size from the card */
// How does this relate to the resource length from the PCI hardware?
- par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+ par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
/* Virtualize the framebuffer */
info->screen_base = ioremap(fb_addr, par->vram_size);
static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
{
u32 pmgt;
- u16 pwr_command;
struct pci_dev *pdev = par->pdev;
if (!par->pm_reg)
/* Set the chip into the appropriate suspend mode (we use D2,
* D3 would require a complete re-initialisation of the chip,
* including PCI config registers, clocks, AGP configuration, ...)
+ *
+ * For resume, the core will have already brought us back to D0
*/
if (suspend) {
/* Make sure CRTC2 is reset. Remove that the day we decide to
aty_st_le32(BUS_CNTL1, 0x00000010);
aty_st_le32(MEM_POWER_MISC, 0x0c830000);
mdelay(100);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+
/* Switch PCI power management to D2 */
- pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
- (pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
- } else {
- /* Switch back PCI power management to D0 */
- mdelay(100);
- pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
- pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
- mdelay(100);
+ pci_set_power_state(pdev, PCI_D2);
}
}
struct fb_info *info = pci_get_drvdata(pdev);
struct aty128fb_par *par = info->par;
+ /* Because we may change PCI D state ourselves, we need to
+ * first save the config space content so the core can
+ * restore it properly on resume.
+ */
+ pci_save_state(pdev);
+
/* We don't do anything but D2, for now we return 0, but
* we may want to change that. How do we know if the BIOS
* can properly take care of D3 ? Also, with swsusp, we
if (pdev->dev.power.power_state.event == PM_EVENT_ON)
return 0;
+ /* PCI state will have been restored by the core, so
+ * we should be in D0 now with our config space fully
+ * restored
+ */
+
/* Wakeup chip */
aty128_set_suspend(par, 0);
par->asleep = 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff