source "drivers/char/agp/Kconfig"
+source "drivers/gpu/vga/Kconfig"
+
source "drivers/gpu/drm/Kconfig"
config VGASTATE
You need an utility program called fbset to make full use of frame
buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
and the Framebuffer-HOWTO at
- <http://www.tahallah.demon.co.uk/programming/prog.html> for more
+ <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more
information.
Say Y here and to the driver for your graphics board below if you
config FB_ACORN
bool "Acorn VIDC support"
- depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
+ depends on (FB = y) && ARM && ARCH_ACORN
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && ARM && ARCH_IMX
+ depends on FB && (ARCH_MX1 || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select STI_CONSOLE
+ select VT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_ATMEL_STN
bool "Use a STN display with AT91/AT32 LCD Controller"
- depends on FB_ATMEL && MACH_AT91SAM9261EK
+ depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
default n
help
Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86_32
- select AGP
- select AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86
- select AGP
- select AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EMBEDDED
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT
+ select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+ depends on !DRM_I915
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
+ To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
To compile this driver as a module, choose M here: the
module will be called intelfb.
pixel and 32 bpp packed pixel. You can also use font widths
different from 8.
- If you need support for G400 secondary head, you must first say Y to
- "I2C support" in the character devices section, and then to
- "Matrox I2C support" and "G400 second head support" here in the
- framebuffer section. G450/G550 secondary head and digital output
- are supported without additional modules.
+ If you need support for G400 secondary head, you must say Y to
+ "Matrox I2C support" and "G400 second head support" right below.
+ G450/G550 secondary head and digital output are supported without
+ additional modules.
The driver starts in monitor mode. You must use the matroxset tool
(available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
painting procedures (the secondary head does not use acceleration
engine).
-config FB_MATROX_MULTIHEAD
- bool "Multihead support"
- depends on FB_MATROX
- ---help---
- Say Y here if you have more than one (supported) Matrox device in
- your computer and you want to use all of them for different monitors
- ("multihead"). If you have only one device, you should say N because
- the driver compiled with Y is larger and a bit slower, especially on
- ia32 (ix86).
-
- If you said M to "Matrox unified accelerated driver" and N here, you
- will still be able to use several Matrox devices simultaneously:
- insert several instances of the module matroxfb into the kernel
- with insmod, supplying the parameter "dev=N" where N is 0, 1, etc.
- for the different Matrox devices. This method is slightly faster but
- uses 40 KB of kernel memory per Matrox card.
-
- There is no need for enabling 'Matrox multihead support' if you have
- only one Matrox card in the box.
-
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
a framebuffer device. There are both PCI and AGP versions. You
don't need to choose this to run the Radeon in plain VGA mode.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
There is a product page at
http://apps.ati.com/ATIcompare/
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT
+ select FB_BOOT_VESA_SUPPORT if FB_SIS = y
help
This is the frame buffer device driver for the SiS 300, 315, 330
and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
+ select FB_MODE_HELPERS
help
This driver supports graphics boards with the 3Dfx Banshee,
Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
device driver with acceleration functions.
+config FB_3DFX_I2C
+ bool "Enable DDC/I2C support"
+ depends on FB_3DFX && EXPERIMENTAL
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
+
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
depends on FB && PCI
Driver for CastleRock integrated graphics core in the
VIA VT8623 [Apollo CLE266] chipset.
-config FB_CYBLA
- tristate "Cyberblade/i1 support"
- depends on FB && PCI && X86_32 && !64BIT
- select FB_CFB_IMAGEBLIT
- ---help---
- This driver is supposed to support the Trident Cyberblade/i1
- graphics core integrated in the VIA VT8601A North Bridge,
- also known as VIA Apollo PLE133.
-
- Status:
- - Developed, tested and working on EPIA 5000 and EPIA 800.
- - Does work reliable on all systems with CRT/LCD connected to
- normal VGA ports.
- - Should work on systems that do use the internal LCD port, but
- this is absolutely not tested.
-
- Character imageblit, copyarea and rectangle fill are hw accelerated,
- ypan scrolling is used by default.
-
- Please do read <file:Documentation/fb/cyblafb/*>.
-
- To compile this driver as a module, choose M here: the
- module will be called cyblafb.
-
config FB_TRIDENT
- tristate "Trident support"
+ tristate "Trident/CyberXXX/CyberBlade support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
and Blade XP.
There are also integrated versions of these chips called CyberXXXX,
CyberImage or CyberBlade. These chips are mostly found in laptops
- but also on some motherboards. For more information, read
- <file:Documentation/fb/tridentfb.txt>
+ but also on some motherboards including early VIA EPIA motherboards.
+ For more information, read <file:Documentation/fb/tridentfb.txt>
Say Y if you have such a graphics board.
To compile this driver as a module, choose M here: the
module will be called tridentfb.
-config FB_TRIDENT_ACCEL
- bool "Trident Acceleration functions (EXPERIMENTAL)"
- depends on FB_TRIDENT && EXPERIMENTAL
- ---help---
- This will compile the Trident frame buffer device with
- acceleration functions.
-
config FB_ARK
tristate "ARK 2000PV support"
depends on FB && PCI
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
+config FB_PXA168
+ tristate "PXA168/910 LCD framebuffer support"
+ depends on FB && (CPU_PXA168 || CPU_PXA910)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in LCD controller in the Marvell
+ MMP processor.
+
config FB_PXA
tristate "PXA LCD framebuffer support"
depends on FB && ARCH_PXA
If unsure, say N.
+config FB_PXA_OVERLAY
+ bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+ default n
+ depends on FB_PXA && (PXA27x || PXA3xx)
+
config FB_PXA_SMARTPANEL
bool "PXA Smartpanel LCD support"
default n
config FB_SH_MOBILE_LCDC
tristate "SuperH Mobile LCDC framebuffer support"
- depends on FB && SUPERH
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- default m
+ depends on FB && SUPERH && HAVE_CLK
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
---help---
Frame buffer driver for the on-chip SH-Mobile LCD controller.
depends on FB_TMIO
default y
+config FB_S3C
+ tristate "Samsung S3C framebuffer support"
+ depends on FB && ARCH_S3C64XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in FB controller in the Samsung
+ SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
+ and the S3C64XX series such as the S3C6400 and S3C6410.
+
+ These chips all have the same basic framebuffer design with the
+ actual capabilities depending on the chip. For instance the S3C6400
+ and S3C6410 support 4 hardware windows whereas the S3C24XX series
+ currently only have two.
+
+ Currently the support is only for the S3C6400 and S3C6410 SoCs.
+
+config FB_S3C_DEBUG_REGWRITE
+ bool "Debug register writes"
+ depends on FB_S3C
+ ---help---
+ Show all register writes via printk(KERN_DEBUG)
+
config FB_S3C2410
tristate "S3C2410 LCD framebuffer support"
depends on FB && ARCH_S3C2410
config FB_XILINX
tristate "Xilinx frame buffer support"
- depends on FB && XILINX_VIRTEX
+ depends on FB && (XILINX_VIRTEX || MICROBLAZE)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
depends on FB && MIPS_COBALT
config FB_SH7760
- bool "SH7760/SH7763 LCDC support"
- depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763)
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Support for the SH7760/SH7763 integrated (D)STN/TFT LCD Controller.
- Supports display resolutions up to 1024x1024 pixel, grayscale and
- color operation, with depths ranging from 1 bpp to 8 bpp monochrome
- and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
- panels <= 320 pixel horizontal resolution.
+ bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
+ depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
+ || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Support for the SH7760/SH7763/SH7720/SH7721 integrated
+ (D)STN/TFT LCD Controller.
+ Supports display resolutions up to 1024x1024 pixel, grayscale and
+ color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+ and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+ panels <= 320 pixel horizontal resolution.
+
+config FB_DA8XX
+ tristate "DA8xx/OMAP-L1xx Framebuffer support"
+ depends on FB && ARCH_DAVINCI_DA8XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ This is the frame buffer device driver for the TI LCD controller
+ found on DA8xx/OMAP-L1xx SoCs.
+ If unsure, say N.
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
controller. The pre-release name for this device was 8track
and could also have been called by some vendors as PVI-nnnn.
+config FB_MB862XX
+ tristate "Fujitsu MB862xx GDC support"
+ depends on FB
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+config FB_MB862XX_PCI_GDC
+ bool "Carmine/Coral-P(A) GDC"
+ depends on PCI && FB_MB862XX
+ ---help---
+ This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+ PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+ bool "Lime GDC"
+ depends on FB_MB862XX
+ depends on OF && !FB_MB862XX_PCI_GDC
+ depends on PPC
+ select FB_FOREIGN_ENDIAN
+ select FB_LITTLE_ENDIAN
+ ---help---
+ Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+config FB_EP93XX
+ tristate "EP93XX frame buffer support"
+ depends on FB && ARCH_EP93XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+ This driver is also available as a module. The module will be called
+ ep93xx-fb.
+
+config FB_PRE_INIT_FB
+ bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+ depends on FB_MB862XX_LIME
+ ---help---
+ Select this option if display contents should be inherited as set by
+ the bootloader.
+
+config FB_MSM
+ tristate
+ depends on FB && ARCH_MSM
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+
+config FB_MX3
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+ tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This driver implements support for the E-Ink Broadsheet
+ controller. The release name for this device was Epson S1D13521
+ and could also have been called by other names when coupled with
+ a bridge adapter.
+
source "drivers/video/omap/Kconfig"
source "drivers/video/backlight/Kconfig"