#
menu "Graphics support"
+ depends on HAS_IOMEM
-source "drivers/video/backlight/Kconfig"
-source "drivers/video/display/Kconfig"
+source "drivers/char/agp/Kconfig"
+
+source "drivers/char/drm/Kconfig"
config VGASTATE
tristate
default n
-config FB
+config VIDEO_OUTPUT_CONTROL
+ tristate "Lowlevel video output switch controls"
+ help
+ This framework adds support for low-level control of the video
+ output switch.
+
+menuconfig FB
tristate "Support for frame buffer devices"
---help---
The frame buffer device provides an abstraction for the graphics
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_CFB_REV_PIXELS_IN_BYTE
+ bool
+ depends on FB
+ default n
+ ---help---
+ Allow generic frame-buffer functions to work on displays with 1, 2
+ and 4 bits per pixel depths which has opposite order of pixels in
+ byte order to bytes in long order.
+
config FB_SYS_FILLRECT
tristate
depends on FB
config FB_CT65550
bool "Chips 65550 display support"
- depends on (FB = y) && PPC32
+ depends on (FB = y) && PPC32 && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
To compile this driver as a module, choose M here: the
module will be called vga16fb.
+config FB_BF54X_LQ043
+ tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+ depends on FB && (BF54x)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
Say Y if you have one of those.
+config FB_UVESA
+ tristate "Userspace VESA VGA graphics support"
+ depends on FB && CONNECTOR
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ help
+ This is the frame buffer driver for generic VBE 2.0 compliant
+ graphic cards. It can also take advantage of VBE 3.0 features,
+ such as refresh rate adjustment.
+
+ This driver generally provides more features than vesafb but
+ requires a userspace helper application called 'v86d'. See
+ <file:Documentation/fb/uvesafb.txt> for more information.
+
+ If unsure, say N.
+
config FB_VESA
bool "VESA VGA graphics support"
depends on (FB = y) && X86
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+config FB_EFI
+ bool "EFI-based Framebuffer Support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the EFI frame buffer device driver. If the firmware on
+ your platform is UEFI2.0, select Y to add support for
+ Graphics Output Protocol for early console messages to appear.
+
config FB_IMAC
bool "Intel-based Macintosh Framebuffer Support"
depends on (FB = y) && X86 && EFI
help
This enables support for the Hecuba board. This driver was tested
with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 4 bit control). If you anticpate using
+ interface (8 bit data, 4 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on (FB = y) && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
config FB_EPSON1355
bool "Epson 1355 framebuffer support"
- depends on (FB = y) && (SUPERH || ARCH_CEIVA)
+ depends on (FB = y) && ARCH_CEIVA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+ bool "Frame Buffer in internal SRAM"
+ depends on FB_ATMEL && ARCH_AT91SAM9261
+ help
+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ to let frame buffer in external SDRAM.
+
+config FB_ATMEL_STN
+ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && MACH_AT91SAM9261EK
+ default n
+ help
+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+ Controller. Say N if you want to connect a TFT.
+
+ If unsure, say N.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_NVIDIA
+ default n
+ help
+ Say Y here if you want the nVidia driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
depends on FB_NVIDIA
here.
config FB_RIVA_DEBUG
- bool "Lots of debug output from Riva(nVidia) driver"
+ bool "Lots of debug output"
depends on FB_RIVA
default n
help
config FB_ATY_CT
bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
depends on PCI && FB_ATY
- default y if SPARC64 && FB_PCI
+ default y if SPARC64 && PCI
help
Say Y here to support use of ATI's 64-bit Rage boards (or other
boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
WARNING: Do not use any application that uses the 3D engine
(namely glide) while using this driver.
- Please read the <file:Documentation/fb/README-sstfb.txt> for supported
+ Please read the <file:Documentation/fb/sstfb.txt> for supported
options and other important info support.
config FB_VT8623
and ICS 5342 RAMDAC.
config FB_PM3
- tristate "Permedia3 support"
- depends on FB && PCI && BROKEN
+ tristate "Permedia3 support (EXPERIMENTAL)"
+ depends on FB && PCI && EXPERIMENTAL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the 3DLabs Permedia3
chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
config FB_AU1100
bool "Au1100 LCD Driver"
- depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+ depends on (FB = y) && MIPS && SOC_AU1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer driver for the AMD Au1100 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1100fb:panel=<name>.
config FB_AU1200
bool "Au1200 LCD Driver"
source "drivers/video/geode/Kconfig"
-config FB_FFB
- bool "Creator/Creator3D/Elite3D support"
- depends on FB_SBUS && SPARC64
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Creator, Creator3D,
- and Elite3D graphics boards.
-
-config FB_TCX
- bool "TCX (SS4/SS5 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the TCX 24/8bit frame
- buffer.
-
-config FB_CG14
- bool "CGfourteen (SX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGfourteen frame
- buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
- bool "P9100 (Sparcbook 3 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the P9100 card
- supported on Sparcbook 3 machines.
-
-config FB_LEO
- bool "Leo (ZX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the SBUS-based Sun ZX
- (leo) frame buffer cards.
-
-config FB_XVR500
- bool "Sun XVR-500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_XVR2500
- bool "Sun XVR-2500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-2500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_PCI
- bool "PCI framebuffers"
- depends on (FB = y) && PCI && SPARC
-
-config FB_IGA
- bool "IGA 168x display support"
- depends on SPARC32 && FB_PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
-
config FB_HIT
tristate "HD64461 Frame Buffer support"
depends on FB && HD64461
config FB_PMAGB_B
tristate "PMAGB-B TURBOchannel framebuffer support"
- depends on TC
+ depends on FB && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
Codename "Maxine").
-config FB_TX3912
- bool "TMPTX3912/PR31700 frame buffer support"
- depends on (FB = y) && NINO
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
-
- Say Y here to enable kernel support for the on-board framebuffer.
-
config FB_G364
bool "G364 frame buffer support"
depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called sm501fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_IBM_GXT4500
tristate "Framebuffer support for IBM GXT4500P adaptor"
- depends on PPC
+ depends on FB && PPC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
adaptor, found on some IBM System P (pSeries) machines.
config FB_PS3
- bool "PS3 GPU framebuffer driver"
- depends on (FB = y) && PS3_PS3AV
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ tristate "PS3 GPU framebuffer driver"
+ depends on FB && PS3_PS3AV
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
---help---
Include support for the virtual frame buffer in the PS3 platform.
config FB_PS3_DEFAULT_SIZE_M
int "PS3 default frame buffer size (in MiB)"
depends on FB_PS3
- default 18
+ default 9
---help---
This is the default size (in MiB) of the virtual frame buffer in
the PS3.
If unsure, say N.
+source "drivers/video/omap/Kconfig"
+
+source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
+
if VT
source "drivers/video/console/Kconfig"
endif
endif
endmenu
-
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff