menu "Graphics support"
depends on HAS_IOMEM
-source "drivers/video/backlight/Kconfig"
-source "drivers/video/display/Kconfig"
+source "drivers/char/agp/Kconfig"
+
+source "drivers/gpu/drm/Kconfig"
config VGASTATE
tristate
default n
-config FB
+config VIDEO_OUTPUT_CONTROL
+ tristate "Lowlevel video output switch controls"
+ help
+ This framework adds support for low-level control of the video
+ output switch.
+
+menuconfig FB
tristate "Support for frame buffer devices"
---help---
The frame buffer device provides an abstraction for the graphics
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_CFB_REV_PIXELS_IN_BYTE
+ bool
+ depends on FB
+ default n
+ ---help---
+ Allow generic frame-buffer functions to work on displays with 1, 2
+ and 4 bits per pixel depths which has opposite order of pixels in
+ byte order to bytes in long order.
+
config FB_SYS_FILLRECT
tristate
depends on FB
blitting. This is used by drivers that don't provide their own
(accelerated) version and the framebuffer is in system RAM.
+menuconfig FB_FOREIGN_ENDIAN
+ bool "Framebuffer foreign endianness support"
+ depends on FB
+ ---help---
+ This menu will let you enable support for the framebuffers with
+ non-native endianness (e.g. Little-Endian framebuffer on a
+ Big-Endian machine). Most probably you don't have such hardware,
+ so it's safe to say "n" here.
+
+choice
+ prompt "Choice endianness support"
+ depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+ bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+ bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+ bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
config FB_SYS_FOPS
tristate
depends on FB
config FB_DEFERRED_IO
bool
depends on FB
- default y
+
+config FB_METRONOME
+ tristate
+ depends on FB
+ depends on FB_DEFERRED_IO
+
+config FB_HECUBA
+ tristate
+ depends on FB
+ depends on FB_DEFERRED_IO
config FB_SVGALIB
tristate
config FB_CT65550
bool "Chips 65550 display support"
- depends on (FB = y) && PPC32
+ depends on (FB = y) && PPC32 && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
To compile this driver as a module, choose M here: the
module will be called vga16fb.
+config FB_BF54X_LQ043
+ tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+ depends on FB && (BF54x) && !BF542
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
+config FB_BFIN_T350MCQB
+ tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+ depends on FB && BLACKFIN
+ select BFIN_GPTIMERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
select FB_CFB_IMAGEBLIT
select FB_MACMODES
-# bool ' Apple DAFB display support' CONFIG_FB_DAFB
config FB_HP300
bool
- depends on (FB = y) && HP300
- select FB_CFB_FILLRECT
+ depends on (FB = y) && DIO
select FB_CFB_IMAGEBLIT
default y
Say Y if you have one of those.
+config FB_UVESA
+ tristate "Userspace VESA VGA graphics support"
+ depends on FB && CONNECTOR
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ help
+ This is the frame buffer driver for generic VBE 2.0 compliant
+ graphic cards. It can also take advantage of VBE 3.0 features,
+ such as refresh rate adjustment.
+
+ This driver generally provides more features than vesafb but
+ requires a userspace helper application called 'v86d'. See
+ <file:Documentation/fb/uvesafb.txt> for more information.
+
+ If unsure, say N.
+
config FB_VESA
bool "VESA VGA graphics support"
depends on (FB = y) && X86
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+config FB_EFI
+ bool "EFI-based Framebuffer Support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the EFI frame buffer device driver. If the firmware on
+ your platform is UEFI2.0, select Y to add support for
+ Graphics Output Protocol for early console messages to appear.
+
config FB_IMAC
bool "Intel-based Macintosh Framebuffer Support"
depends on (FB = y) && X86 && EFI
help
This is the frame buffer device driver for the Intel-based Macintosh
-config FB_HECUBA
- tristate "Hecuba board support"
+config FB_N411
+ tristate "N411 Apollo/Hecuba devkit support"
depends on FB && X86 && MMU
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
+ select FB_HECUBA
help
- This enables support for the Hecuba board. This driver was tested
- with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 4 bit control). If you anticpate using
- this driver, say Y or M; otherwise say N. You must specify the
- GPIO IO address to be used for setting control and data.
+ This enables support for the Apollo display controller in its
+ Hecuba form using the n411 devkit.
config FB_HGA
tristate "Hercules mono graphics support"
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on (FB = y) && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
config FB_EPSON1355
bool "Epson 1355 framebuffer support"
- depends on (FB = y) && (SUPERH || ARCH_CEIVA)
+ depends on (FB = y) && ARCH_CEIVA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_ATMEL
tristate "AT91/AT32 LCD Controller support"
- depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
to let frame buffer in external SDRAM.
+config FB_ATMEL_STN
+ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && MACH_AT91SAM9261EK
+ default n
+ help
+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+ Controller. Say N if you want to connect a TFT.
+
+ If unsure, say N.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_NVIDIA
+ default n
+ help
+ Say Y here if you want the nVidia driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
depends on FB_NVIDIA
here.
config FB_RIVA_DEBUG
- bool "Lots of debug output from Riva(nVidia) driver"
+ bool "Lots of debug output"
depends on FB_RIVA
default n
help
This driver supports the LE80578 (Carillo Ranch) board
config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel
- 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
+ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
If you say Y here and want DDC/I2C support you must first say Y to
config FB_ATY_CT
bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
depends on PCI && FB_ATY
- default y if SPARC64 && FB_PCI
+ default y if SPARC64 && PCI
help
Say Y here to support use of ATI's 64-bit Rage boards (or other
boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
WARNING: Do not use any application that uses the 3D engine
(namely glide) while using this driver.
- Please read the <file:Documentation/fb/README-sstfb.txt> for supported
+ Please read the <file:Documentation/fb/sstfb.txt> for supported
options and other important info support.
config FB_VT8623
similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
and maybe other boards.
-config FB_AU1100
- bool "Au1100 LCD Driver"
- depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
-
-config FB_AU1200
- bool "Au1200 LCD Driver"
- depends on (FB = y) && MIPS && SOC_AU1200
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer driver for the AMD Au1200 SOC. It can drive
- various panels and CRTs by passing in kernel cmd line option
- au1200fb:panel=<name>.
-
-source "drivers/video/geode/Kconfig"
-
-config FB_FFB
- bool "Creator/Creator3D/Elite3D support"
- depends on FB_SBUS && SPARC64
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Creator, Creator3D,
- and Elite3D graphics boards.
-
-config FB_TCX
- bool "TCX (SS4/SS5 only) support"
- depends on FB_SBUS
+config FB_CARMINE
+ tristate "Fujitsu carmine frame buffer support"
+ depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
- This is the frame buffer device driver for the TCX 24/8bit frame
- buffer.
+ This is the frame buffer device driver for the Fujitsu Carmine chip.
+ The driver provides two independent frame buffer devices.
-config FB_CG14
- bool "CGfourteen (SX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGfourteen frame
- buffer on Desktop SPARCsystems with the SX graphics option.
+choice
+ depends on FB_CARMINE
+ prompt "DRAM timing"
+ default FB_CARMINE_DRAM_EVAL
-config FB_P9100
- bool "P9100 (Sparcbook 3 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+config FB_CARMINE_DRAM_EVAL
+ bool "Eval board timings"
help
- This is the frame buffer device driver for the P9100 card
- supported on Sparcbook 3 machines.
+ Use timings which work on the eval card.
-config FB_LEO
- bool "Leo (ZX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+config CARMINE_DRAM_CUSTOM
+ bool "Custom board timings"
help
- This is the frame buffer device driver for the SBUS-based Sun ZX
- (leo) frame buffer cards.
+ Use custom board timings.
+endchoice
-config FB_XVR500
- bool "Sun XVR-500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
+config FB_AU1100
+ bool "Au1100 LCD Driver"
+ depends on (FB = y) && MIPS && SOC_AU1100
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
- This is the framebuffer device for the Sun XVR-500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
+ This is the framebuffer driver for the AMD Au1100 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1100fb:panel=<name>.
-config FB_XVR2500
- bool "Sun XVR-2500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
+config FB_AU1200
+ bool "Au1200 LCD Driver"
+ depends on (FB = y) && MIPS && SOC_AU1200
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
- This is the framebuffer device for the Sun XVR-2500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_PCI
- bool "PCI framebuffers"
- depends on (FB = y) && PCI && SPARC
+ This is the framebuffer driver for the AMD Au1200 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1200fb:panel=<name>.
-config FB_IGA
- bool "IGA 168x display support"
- depends on SPARC32 && FB_PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
+source "drivers/video/geode/Kconfig"
config FB_HIT
tristate "HD64461 Frame Buffer support"
config FB_PMAGB_B
tristate "PMAGB-B TURBOchannel framebuffer support"
- depends on TC
+ depends on FB && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
Codename "Maxine").
-config FB_TX3912
- bool "TMPTX3912/PR31700 frame buffer support"
- depends on (FB = y) && NINO
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
-
- Say Y here to enable kernel support for the on-board framebuffer.
-
config FB_G364
bool "G364 frame buffer support"
depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
If unsure, say N.
+config FB_PXA_SMARTPANEL
+ bool "PXA Smartpanel LCD support"
+ default n
+ depends on FB_PXA
+
config FB_PXA_PARAMETERS
bool "PXA LCD command line parameters"
default n
If unsure, say N.
+config FB_FSL_DIU
+ tristate "Freescale DIU framebuffer support"
+ depends on FB && FSL_SOC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select PPC_LIB_RHEAP
+ ---help---
+ Framebuffer driver for the Freescale SoC DIU
+
config FB_W100
tristate "W100 frame buffer support"
- depends on FB && PXA_SHARPSL
+ depends on FB && ARCH_PXA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+ It can also drive the w3220 chip found on iPAQ hx4700.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called sm501fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_IBM_GXT4500
tristate "Framebuffer support for IBM GXT4500P adaptor"
- depends on PPC
+ depends on FB && PPC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
adaptor, found on some IBM System P (pSeries) machines.
config FB_PS3
- bool "PS3 GPU framebuffer driver"
- depends on (FB = y) && PS3_PS3AV
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ tristate "PS3 GPU framebuffer driver"
+ depends on FB && PS3_PS3AV
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
---help---
Include support for the virtual frame buffer in the PS3 platform.
config FB_PS3_DEFAULT_SIZE_M
int "PS3 default frame buffer size (in MiB)"
depends on FB_PS3
- default 18
+ default 9
---help---
This is the default size (in MiB) of the virtual frame buffer in
the PS3.
framebuffer. ML300 carries a 640*480 LCD display on the board,
ML403 uses a standard DB15 VGA connector.
+config FB_AM200EPD
+ tristate "AM-200 E-Ink EPD devkit support"
+ depends on FB && ARCH_PXA && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select FB_METRONOME
+ help
+ This enables support for the Metronome display controller used on
+ the E-Ink AM-200 EPD devkit.
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
If unsure, say N.
+config XEN_FBDEV_FRONTEND
+ tristate "Xen virtual frame buffer support"
+ depends on FB && XEN
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ default y
+ help
+ This driver implements the front-end of the Xen virtual
+ frame buffer driver. It communicates with a back-end
+ in another domain.
+
+source "drivers/video/omap/Kconfig"
+
+source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
+
if VT
source "drivers/video/console/Kconfig"
endif
endif
endmenu
-