menu "Graphics support"
-config FIRMWARE_EDID
- bool "Enable firmware EDID"
- default y
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
-
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
+source "drivers/video/backlight/Kconfig"
config FB
tristate "Support for frame buffer devices"
(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default n
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
+config FB_DDC
+ tristate
+ depends on FB
+ select I2C_ALGOBIT
+ select I2C
+ default n
+
config FB_CFB_FILLRECT
tristate
depends on FB
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_SVGALIB
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Common utility functions useful to fbdev drivers of VGA-based
+ cards.
+
config FB_MACMODES
tristate
depends on FB
This is particularly important to one driver, matroxfb. If
unsure, say N.
+comment "Frame buffer hardware drivers"
+ depends on FB
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
If you want to compile this as a module (=code which can be
inserted into and removed from the running kernel), say M
- here and read <file:Documentation/modules.txt>. The module
+ here and read <file:Documentation/kbuild/modules.txt>. The module
will be called amba-clcd.
choice
bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
help
This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
- color QVGA, HRTFT panel. The LogicPD device includes an
+ color QVGA, HRTFT panel. The LogicPD device includes
an integrated HRTFT controller IC.
The native resolution is 240x320.
and CD32. If you intend to run Linux on any of these systems, say Y;
otherwise say N.
-config FB_CYBER
- tristate "Amiga CyberVision 64 support"
- depends on FB && ZORRO && BROKEN
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the Cybervision 64 graphics card from
- Phase5. Please note that its use is not all that intuitive (i.e. if
- you have any questions, be sure to ask!). Say N unless you have a
- Cybervision 64 or plan to get one before you next recompile the
- kernel. Please note that this driver DOES NOT support the
- Cybervision 64/3D card, as they use incompatible video chips.
-
-config FB_VIRGE
- bool "Amiga CyberVision 64/3D support "
- depends on (FB = y) && ZORRO && BROKEN
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the Cybervision 64/3D graphics card from
- Phase5. Please note that its use is not all that intuitive (i.e. if
- you have any questions, be sure to ask!). Say N unless you have a
- Cybervision 64/3D or plan to get one before you next recompile the
- kernel. Please note that this driver DOES NOT support the older
- Cybervision 64 card, as they use incompatible video chips.
-
-config FB_RETINAZ3
- tristate "Amiga Retina Z3 support"
- depends on (FB = y) && ZORRO && BROKEN
- help
- This enables support for the Retina Z3 graphics card. Say N unless
- you have a Retina Z3 or plan to get one before you next recompile
- the kernel.
-
config FB_FM2
bool "Amiga FrameMaster II/Rainbow II support"
depends on (FB = y) && ZORRO
is based on the KS-108 lcd controller and is typically a matrix
of 2*n chips. This driver was tested with a 128x64 panel. This
driver supports it for use with x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 8 bit control). If you anticpate using
+ interface (8 bit data, 8 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
config FB_ATARI
bool "Atari native chipset support"
- depends on (FB = y) && ATARI && BROKEN
+ depends on (FB = y) && ATARI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the builtin graphics
chipset found in Ataris.
config FB_OF
bool "Open Firmware frame buffer device support"
- depends on (FB = y) && (PPC64 || PPC_OF)
+ depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEO_SELECT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
-config FB_SUN3
- bool "Sun3 framebuffer support"
- depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
-
config FB_SBUS
bool "SBUS and UPA framebuffers"
depends on (FB = y) && SPARC
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_NVIDIA_I2C
- select I2C if FB_NVIDIA_I2C
+ select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
config FB_NVIDIA_I2C
bool "Enable DDC Support"
depends on FB_NVIDIA
+ select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_NVIDIA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_NVIDIA
default y
help
Say Y here if you want to control the backlight of your display.
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RIVA_I2C
- select I2C if FB_RIVA_I2C
+ select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
config FB_RIVA_I2C
bool "Enable DDC Support"
depends on FB_RIVA
+ select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
default n
help
Say Y here if you want the Riva driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_RIVA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RIVA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RIVA
default y
help
Say Y here if you want to control the backlight of your display.
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && FB_I810_GTF
- select I2C
- select I2C_ALGOBIT
+ select FB_DDC
help
config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel
- 830M/845G/852GM/855GM/865G chipsets.
+ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
Say Y if you have and plan to use such a board.
- To compile this driver as a module, choose M here: the
+ If you say Y here and want DDC/I2C support you must first say Y to
+ "I2C support" and "I2C bit-banging support" in the character devices
+ section.
+
+ If you say M here then "I2C support" and "I2C bit-banging support"
+ can be build either as modules or built-in.
+
+ To compile this driver as a module, choose M here: the
module will be called intelfb.
+ For more information, please read <file:Documentation/fb/intelfb.txt>
+
config FB_INTEL_DEBUG
- bool "Intel driver Debug Messages"
+ bool "Intel driver Debug Messages"
depends on FB_INTEL
---help---
Say Y here if you want the Intel driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
+config FB_INTEL_I2C
+ bool "DDC/I2C for Intel framebuffer support"
+ depends on FB_INTEL
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
config FB_MATROX
tristate "Matrox acceleration"
depends on FB && PCI
config FB_MATROX_I2C
tristate "Matrox I2C support"
- depends on FB_MATROX && I2C
- select I2C_ALGOBIT
+ depends on FB_MATROX
+ select FB_DDC
---help---
This drivers creates I2C buses which are needed for accessing the
DDC (I2C) bus present on all Matroxes, an I2C bus which
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RADEON_I2C
- select I2C if FB_RADEON_I2C
+ select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
+ select FB_DDC
default y
help
Say Y here if you want DDC/I2C support for your Radeon board.
config FB_RADEON_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RADEON && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RADEON
default y
help
Say Y here if you want to control the backlight of your display.
default n
help
Say Y here if you want the Radeon driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
config FB_ATY128_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY128 && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY128
default y
help
Say Y here if you want to control the backlight of your display.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY_BACKLIGHT
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
config FB_ATY_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY
default y
help
Say Y here if you want to control the backlight of your display.
-config FB_S3TRIO
- bool "S3 Trio display support"
- depends on (FB = y) && PPC && BROKEN
- help
- If you have a S3 Trio say Y. Say N for S3 Virge.
+config FB_S3
+ tristate "S3 Trio/Virge support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ ---help---
+ Driver for graphics boards with S3 Trio / S3 Virge chip.
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
- select I2C_ALGOBIT if FB_SAVAGE_I2C
- select I2C if FB_SAVAGE_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_SAVAGE_I2C
bool "Enable DDC2 Support"
depends on FB_SAVAGE
+ select FB_DDC
help
This enables I2C support for S3 Savage Chipsets. This is used
only for getting EDID information from the attached display
config FB_AU1200
bool "Au1200 LCD Driver"
- depends on FB && MIPS && SOC_AU1200
+ depends on (FB = y) && MIPS && SOC_AU1200
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
used mainly in the MIPS-based DECstation series.
config FB_PMAG_BA
- bool "PMAG-BA TURBOchannel framebuffer support"
- depends on (FB = y) && TC
+ tristate "PMAG-BA TURBOchannel framebuffer support"
+ depends on FB && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
used mainly in the MIPS-based DECstation series.
config FB_PMAGB_B
- bool "PMAGB-B TURBOchannel framebuffer support"
- depends on (FB = y) && TC
+ tristate "PMAGB-B TURBOchannel framebuffer support"
+ depends on TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_68328
bool "Motorola 68328 native frame buffer support"
- depends on FB && (M68328 || M68EZ328 || M68VZ328)
+ depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called pxafb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called w100fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
+config FB_SM501
+ tristate "Silicon Motion SM501 framebuffer support"
+ depends on FB && MFD_SM501
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the CRT and LCD controllers in the Silicon
+ Motion SM501.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called sm501fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+
config FB_PNX4008_DUM
tristate "Display Update Module support on Philips PNX4008 board"
depends on FB && ARCH_PNX4008
---help---
Say Y here to enable support for PNX4008 RGB Framebuffer
+config FB_IBM_GXT4500
+ tristate "Framebuffer support for IBM GXT4500P adaptor"
+ depends on PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for the IBM GXT4500P display
+ adaptor, found on some IBM System P (pSeries) machines.
+
+config FB_PS3
+ bool "PS3 GPU framebuffer driver"
+ depends on (FB = y) && PS3_PS3AV
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+ int "PS3 default frame buffer size (in MiB)"
+ depends on FB_PS3
+ default 18
+ ---help---
+ This is the default size (in MiB) of the virtual frame buffer in
+ the PS3.
+ The default value can be overridden on the kernel command line
+ using the "ps3fb" option (e.g. "ps3fb=9M");
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
kernel option `video=vfb:'.
To compile this driver as a module, choose M here: the
- module will be called vfb.
+ module will be called vfb. In order to load it, you must use
+ the vfb_enable=1 option.
If unsure, say N.
+
if VT
source "drivers/video/console/Kconfig"
endif
source "drivers/video/logo/Kconfig"
endif
-if SYSFS
- source "drivers/video/backlight/Kconfig"
-endif
-
endmenu