config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && ARM && ARCH_IMX
+ depends on FB && (ARCH_IMX || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86_32
- select AGP
- select AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86
- select AGP
- select AGP_INTEL
+ depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
To compile this driver as a module, choose M here: the
module will be called intelfb.
pixel and 32 bpp packed pixel. You can also use font widths
different from 8.
- If you need support for G400 secondary head, you must first say Y to
- "I2C support" in the character devices section, and then to
- "Matrox I2C support" and "G400 second head support" here in the
- framebuffer section. G450/G550 secondary head and digital output
- are supported without additional modules.
+ If you need support for G400 secondary head, you must say Y to
+ "Matrox I2C support" and "G400 second head support" right below.
+ G450/G550 secondary head and digital output are supported without
+ additional modules.
The driver starts in monitor mode. You must use the matroxset tool
(available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
a framebuffer device. There are both PCI and AGP versions. You
don't need to choose this to run the Radeon in plain VGA mode.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
There is a product page at
http://apps.ati.com/ATIcompare/
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
+ select FB_MODE_HELPERS
help
This driver supports graphics boards with the 3Dfx Banshee,
Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
device driver with acceleration functions.
+config FB_3DFX_I2C
+ bool "Enable DDC/I2C support"
+ depends on FB_3DFX && EXPERIMENTAL
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
+
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
depends on FB && PCI
Driver for CastleRock integrated graphics core in the
VIA VT8623 [Apollo CLE266] chipset.
-config FB_CYBLA
- tristate "Cyberblade/i1 support"
- depends on FB && PCI && X86_32 && !64BIT
- select FB_CFB_IMAGEBLIT
- ---help---
- This driver is supposed to support the Trident Cyberblade/i1
- graphics core integrated in the VIA VT8601A North Bridge,
- also known as VIA Apollo PLE133.
-
- Status:
- - Developed, tested and working on EPIA 5000 and EPIA 800.
- - Does work reliable on all systems with CRT/LCD connected to
- normal VGA ports.
- - Should work on systems that do use the internal LCD port, but
- this is absolutely not tested.
-
- Character imageblit, copyarea and rectangle fill are hw accelerated,
- ypan scrolling is used by default.
-
- Please do read <file:Documentation/fb/cyblafb/*>.
-
- To compile this driver as a module, choose M here: the
- module will be called cyblafb.
-
config FB_TRIDENT
- tristate "Trident support"
+ tristate "Trident/CyberXXX/CyberBlade support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
and Blade XP.
There are also integrated versions of these chips called CyberXXXX,
CyberImage or CyberBlade. These chips are mostly found in laptops
- but also on some motherboards. For more information, read
- <file:Documentation/fb/tridentfb.txt>
+ but also on some motherboards including early VIA EPIA motherboards.
+ For more information, read <file:Documentation/fb/tridentfb.txt>
Say Y if you have such a graphics board.
To compile this driver as a module, choose M here: the
module will be called tridentfb.
-config FB_TRIDENT_ACCEL
- bool "Trident Acceleration functions (EXPERIMENTAL)"
- depends on FB_TRIDENT && EXPERIMENTAL
- ---help---
- This will compile the Trident frame buffer device with
- acceleration functions.
-
config FB_ARK
tristate "ARK 2000PV support"
depends on FB && PCI
depends on FB_TMIO
default y
+config FB_S3C
+ tristate "Samsung S3C framebuffer support"
+ depends on FB && ARCH_S3C64XX
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the built-in FB controller in the Samsung
+ SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
+ and the S3C64XX series such as the S3C6400 and S3C6410.
+
+ These chips all have the same basic framebuffer design with the
+ actual capabilities depending on the chip. For instance the S3C6400
+ and S3C6410 support 4 hardware windows whereas the S3C24XX series
+ currently only have two.
+
+ Currently the support is only for the S3C6400 and S3C6410 SoCs.
+
+config FB_S3C_DEBUG_REGWRITE
+ bool "Debug register writes"
+ depends on FB_S3C
+ ---help---
+ Show all register writes via printk(KERN_DEBUG)
+
config FB_S3C2410
tristate "S3C2410 LCD framebuffer support"
depends on FB && ARCH_S3C2410
the bootloader.
config FB_MX3
- tristate "MX3 Framebuffer support"
- depends on FB && MX3_IPU
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- default y
- help
- This is a framebuffer device for the i.MX31 LCD Controller. So
- far only synchronous displays are supported. If you plan to use
- an LCD display with your i.MX31 system, say Y here.
+ tristate "MX3 Framebuffer support"
+ depends on FB && MX3_IPU
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ This is a framebuffer device for the i.MX31 LCD Controller. So
+ far only synchronous displays are supported. If you plan to use
+ an LCD display with your i.MX31 system, say Y here.
config FB_BROADSHEET
tristate "E-Ink Broadsheet/Epson S1D13521 controller support"