if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
- serial->type->release(serial);
+ if (serial->attached)
+ serial->type->release(serial);
/* Now that nothing is using the ports, they can be freed */
for (i = 0; i < serial->num_port_pointers; ++i) {
* This is the first place a new tty gets used. Hence this is where we
* acquire references to the usb_serial structure and the driver module,
* where we store a pointer to the port, and where we do an autoresume.
- * All these actions are reversed in serial_release().
+ * All these actions are reversed in serial_cleanup().
*/
static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
{
return retval;
}
-static int serial_open(struct tty_struct *tty, struct file *filp)
+static int serial_activate(struct tty_port *tport, struct tty_struct *tty)
{
- struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial_port *port =
+ container_of(tport, struct usb_serial_port, port);
struct usb_serial *serial = port->serial;
int retval;
- dbg("%s - port %d", __func__, port->number);
-
- spin_lock_irq(&port->port.lock);
- if (!tty_hung_up_p(filp))
- ++port->port.count;
- spin_unlock_irq(&port->port.lock);
- tty_port_tty_set(&port->port, tty);
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected)
+ retval = -ENODEV;
+ else
+ retval = port->serial->type->open(tty, port);
+ mutex_unlock(&serial->disc_mutex);
+ return retval;
+}
- /* Do the device-specific open only if the hardware isn't
- * already initialized.
- */
- if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) {
- if (mutex_lock_interruptible(&port->mutex))
- return -ERESTARTSYS;
- mutex_lock(&serial->disc_mutex);
- if (serial->disconnected)
- retval = -ENODEV;
- else
- retval = port->serial->type->open(tty, port);
- mutex_unlock(&serial->disc_mutex);
- mutex_unlock(&port->mutex);
- if (retval)
- return retval;
- set_bit(ASYNCB_INITIALIZED, &port->port.flags);
- }
+static int serial_open(struct tty_struct *tty, struct file *filp)
+{
+ struct usb_serial_port *port = tty->driver_data;
- /* Now do the correct tty layer semantics */
- retval = tty_port_block_til_ready(&port->port, tty, filp);
- return retval;
+ dbg("%s - port %d", __func__, port->number);
+ return tty_port_open(&port->port, tty, filp);
}
/**
* serial_down - shut down hardware
- * @port: port to shut down
+ * @tport: tty port to shut down
*
* Shut down a USB serial port unless it is the console. We never
- * shut down the console hardware as it will always be in use.
+ * shut down the console hardware as it will always be in use. Serialized
+ * against activate by the tport mutex and kept to matching open/close pairs
+ * of calls by the ASYNCB_INITIALIZED flag.
*/
-static void serial_down(struct usb_serial_port *port)
+static void serial_down(struct tty_port *tport)
{
+ struct usb_serial_port *port =
+ container_of(tport, struct usb_serial_port, port);
struct usb_serial_driver *drv = port->serial->type;
-
/*
* The console is magical. Do not hang up the console hardware
* or there will be tears.
*/
- if (port->console)
- return;
-
- /* Don't call the close method if the hardware hasn't been
- * initialized.
- */
- if (!test_and_clear_bit(ASYNCB_INITIALIZED, &port->port.flags))
+ if (port->port.console)
return;
-
- mutex_lock(&port->mutex);
if (drv->close)
drv->close(port);
- mutex_unlock(&port->mutex);
}
static void serial_hangup(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
-
dbg("%s - port %d", __func__, port->number);
-
- serial_down(port);
tty_port_hangup(&port->port);
}
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
-
dbg("%s - port %d", __func__, port->number);
-
- if (tty_hung_up_p(filp))
- return;
- if (tty_port_close_start(&port->port, tty, filp) == 0)
- return;
- serial_down(port);
- tty_port_close_end(&port->port, tty);
- tty_port_tty_set(&port->port, NULL);
+ tty_port_close(&port->port, tty, filp);
}
/**
- * serial_release - free resources post close/hangup
+ * serial_cleanup - free resources post close/hangup
* @port: port to free up
*
* Do the resource freeing and refcount dropping for the port.
* Avoid freeing the console.
*
- * Called when the last tty kref is dropped.
+ * Called asynchronously after the last tty kref is dropped,
+ * and the tty layer has already done the tty_shutdown(tty);
*/
-static void serial_release(struct tty_struct *tty)
+static void serial_cleanup(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial;
/* The console is magical. Do not hang up the console hardware
* or there will be tears.
*/
- if (port->console)
+ if (port->port.console)
return;
dbg("%s - port %d", __func__, port->number);
- /* Standard shutdown processing */
- tty_shutdown(tty);
-
tty->driver_data = NULL;
serial = port->serial;
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- /* count is managed under the mutex lock for the tty so cannot
- drop to zero until after the last close completes */
- WARN_ON(!port->port.count);
-
/* pass on to the driver specific version of this function */
retval = port->serial->type->write(tty, port, buf, count);
{
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function */
return port->serial->type->write_room(tty);
}
static int serial_chars_in_buffer(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s = port %d", __func__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* if the device was unplugged then any remaining characters
fell out of the connector ;) */
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function */
if (port->serial->type->throttle)
port->serial->type->throttle(tty);
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function */
if (port->serial->type->unthrottle)
port->serial->type->unthrottle(tty);
dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
- WARN_ON(!port->port.count);
-
/* pass on to the driver specific version of this function
if it is available */
if (port->serial->type->ioctl) {
struct usb_serial_port *port = tty->driver_data;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function
if it is available */
if (port->serial->type->set_termios)
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* pass on to the driver specific version of this function
if it is available */
if (port->serial->type->break_ctl)
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
if (port->serial->type->tiocmget)
return port->serial->type->tiocmget(tty, file);
return -EINVAL;
dbg("%s - port %d", __func__, port->number);
- WARN_ON(!port->port.count);
if (port->serial->type->tiocmset)
return port->serial->type->tiocmset(tty, file, set, clear);
return -EINVAL;
static void kill_traffic(struct usb_serial_port *port)
{
+ int i;
+
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
+ for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
+ usb_kill_urb(port->write_urbs[i]);
/*
* This is tricky.
* Some drivers submit the read_urb in the
static void port_release(struct device *dev)
{
struct usb_serial_port *port = to_usb_serial_port(dev);
+ int i;
dbg ("%s - %s", __func__, dev_name(dev));
usb_free_urb(port->write_urb);
usb_free_urb(port->interrupt_in_urb);
usb_free_urb(port->interrupt_out_urb);
- if (!IS_ERR(port->write_fifo) && port->write_fifo)
- kfifo_free(port->write_fifo);
+ for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
+ usb_free_urb(port->write_urbs[i]);
+ kfree(port->bulk_out_buffers[i]);
+ }
+ kfifo_free(&port->write_fifo);
kfree(port->bulk_in_buffer);
kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
static const struct tty_port_operations serial_port_ops = {
.carrier_raised = serial_carrier_raised,
.dtr_rts = serial_dtr_rts,
+ .activate = serial_activate,
+ .shutdown = serial_down,
};
int usb_serial_probe(struct usb_interface *interface,
port->port.ops = &serial_port_ops;
port->serial = serial;
spin_lock_init(&port->lock);
- mutex_init(&port->mutex);
+ /* Keep this for private driver use for the moment but
+ should probably go away */
INIT_WORK(&port->work, usb_serial_port_work);
serial->port[i] = port;
port->dev.parent = &interface->dev;
dev_err(&interface->dev, "No free urbs available\n");
goto probe_error;
}
- buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ buffer_size = serial->type->bulk_in_size;
+ if (!buffer_size)
+ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
port->bulk_in_size = buffer_size;
port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
}
for (i = 0; i < num_bulk_out; ++i) {
+ int j;
+
endpoint = bulk_out_endpoint[i];
port = serial->port[i];
port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
dev_err(&interface->dev, "No free urbs available\n");
goto probe_error;
}
- port->write_fifo = kfifo_alloc(PAGE_SIZE, GFP_KERNEL,
- &port->lock);
- if (IS_ERR(port->write_fifo))
+ if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
goto probe_error;
- buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ buffer_size = serial->type->bulk_out_size;
+ if (!buffer_size)
+ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
port->bulk_out_size = buffer_size;
port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
endpoint->bEndpointAddress),
port->bulk_out_buffer, buffer_size,
serial->type->write_bulk_callback, port);
+ for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
+ set_bit(j, &port->write_urbs_free);
+ port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port->write_urbs[j]) {
+ dev_err(&interface->dev,
+ "No free urbs available\n");
+ goto probe_error;
+ }
+ port->bulk_out_buffers[j] = kmalloc(buffer_size,
+ GFP_KERNEL);
+ if (!port->bulk_out_buffers[j]) {
+ dev_err(&interface->dev,
+ "Couldn't allocate bulk_out_buffer\n");
+ goto probe_error;
+ }
+ usb_fill_bulk_urb(port->write_urbs[j], dev,
+ usb_sndbulkpipe(dev,
+ endpoint->bEndpointAddress),
+ port->bulk_out_buffers[j], buffer_size,
+ serial->type->write_bulk_callback,
+ port);
+ }
}
if (serial->type->read_int_callback) {
module_put(type->driver.owner);
if (retval < 0)
goto probe_error;
+ serial->attached = 1;
if (retval > 0) {
/* quietly accept this device, but don't bind to a
serial port as it's about to disappear */
serial->num_ports = 0;
goto exit;
}
+ } else {
+ serial->attached = 1;
}
if (get_free_serial(serial, num_ports, &minor) == NULL) {
if (serial->type->suspend) {
r = serial->type->suspend(serial, message);
- if (r < 0)
+ if (r < 0) {
+ serial->suspending = 0;
goto err_out;
+ }
}
for (i = 0; i < serial->num_ports; ++i) {
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
- .shutdown = serial_release,
+ .cleanup = serial_cleanup,
.install = serial_install,
.proc_fops = &serial_proc_fops,
};
set_to_generic_if_null(device, write_bulk_callback);
set_to_generic_if_null(device, disconnect);
set_to_generic_if_null(device, release);
+ set_to_generic_if_null(device, process_read_urb);
+ set_to_generic_if_null(device, prepare_write_buffer);
}
int usb_serial_register(struct usb_serial_driver *driver)