{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
+ { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
+ { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ } /* Terminating entry */
};
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
-/* function prototypes for a PL2303 serial converter */
-static int pl2303_open (struct usb_serial_port *port, struct file *filp);
-static void pl2303_close (struct usb_serial_port *port, struct file *filp);
-static void pl2303_set_termios (struct usb_serial_port *port,
- struct termios *old);
-static int pl2303_ioctl (struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg);
-static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs);
-static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static int pl2303_write (struct usb_serial_port *port,
- const unsigned char *buf, int count);
-static void pl2303_send (struct usb_serial_port *port);
-static int pl2303_write_room(struct usb_serial_port *port);
-static int pl2303_chars_in_buffer(struct usb_serial_port *port);
-static void pl2303_break_ctl(struct usb_serial_port *port,int break_state);
-static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file);
-static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear);
-static int pl2303_startup (struct usb_serial *serial);
-static void pl2303_shutdown (struct usb_serial *serial);
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size);
-static void pl2303_buf_free(struct pl2303_buf *pb);
-static void pl2303_buf_clear(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
- unsigned int count);
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
- unsigned int count);
-
-
-/* All of the device info needed for the PL2303 SIO serial converter */
-static struct usb_serial_driver pl2303_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "pl2303",
- },
- .id_table = id_table,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
- .num_ports = 1,
- .open = pl2303_open,
- .close = pl2303_close,
- .write = pl2303_write,
- .ioctl = pl2303_ioctl,
- .break_ctl = pl2303_break_ctl,
- .set_termios = pl2303_set_termios,
- .tiocmget = pl2303_tiocmget,
- .tiocmset = pl2303_tiocmset,
- .read_bulk_callback = pl2303_read_bulk_callback,
- .read_int_callback = pl2303_read_int_callback,
- .write_bulk_callback = pl2303_write_bulk_callback,
- .write_room = pl2303_write_room,
- .chars_in_buffer = pl2303_chars_in_buffer,
- .attach = pl2303_startup,
- .shutdown = pl2303_shutdown,
-};
enum pl2303_type {
type_0, /* don't know the difference between type 0 and */
enum pl2303_type type;
};
+/*
+ * pl2303_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
+{
+ struct pl2303_buf *pb;
+
+ if (size == 0)
+ return NULL;
+
+ pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+ if (pb == NULL)
+ return NULL;
+
+ pb->buf_buf = kmalloc(size, GFP_KERNEL);
+ if (pb->buf_buf == NULL) {
+ kfree(pb);
+ return NULL;
+ }
+
+ pb->buf_size = size;
+ pb->buf_get = pb->buf_put = pb->buf_buf;
+
+ return pb;
+}
+
+/*
+ * pl2303_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+static void pl2303_buf_free(struct pl2303_buf *pb)
+{
+ if (pb) {
+ kfree(pb->buf_buf);
+ kfree(pb);
+ }
+}
+
+/*
+ * pl2303_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+static void pl2303_buf_clear(struct pl2303_buf *pb)
+{
+ if (pb != NULL)
+ pb->buf_get = pb->buf_put;
+ /* equivalent to a get of all data available */
+}
+
+/*
+ * pl2303_buf_data_avail
+ *
+ * Return the number of bytes of data available in the circular
+ * buffer.
+ */
+static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
+{
+ if (pb == NULL)
+ return 0;
+
+ return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+}
+
+/*
+ * pl2303_buf_space_avail
+ *
+ * Return the number of bytes of space available in the circular
+ * buffer.
+ */
+static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
+{
+ if (pb == NULL)
+ return 0;
+
+ return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+}
+
+/*
+ * pl2303_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
+ unsigned int count)
+{
+ unsigned int len;
+
+ if (pb == NULL)
+ return 0;
+
+ len = pl2303_buf_space_avail(pb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = pb->buf_buf + pb->buf_size - pb->buf_put;
+ if (count > len) {
+ memcpy(pb->buf_put, buf, len);
+ memcpy(pb->buf_buf, buf+len, count - len);
+ pb->buf_put = pb->buf_buf + count - len;
+ } else {
+ memcpy(pb->buf_put, buf, count);
+ if (count < len)
+ pb->buf_put += count;
+ else /* count == len */
+ pb->buf_put = pb->buf_buf;
+ }
+
+ return count;
+}
+
+/*
+ * pl2303_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
+ unsigned int count)
+{
+ unsigned int len;
+
+ if (pb == NULL)
+ return 0;
+
+ len = pl2303_buf_data_avail(pb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = pb->buf_buf + pb->buf_size - pb->buf_get;
+ if (count > len) {
+ memcpy(buf, pb->buf_get, len);
+ memcpy(buf+len, pb->buf_buf, count - len);
+ pb->buf_get = pb->buf_buf + count - len;
+ } else {
+ memcpy(buf, pb->buf_get, count);
+ if (count < len)
+ pb->buf_get += count;
+ else /* count == len */
+ pb->buf_get = pb->buf_buf;
+ }
+
+ return count;
+}
static int pl2303_startup(struct usb_serial *serial)
{
return retval;
}
-static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
- int count)
-{
- struct pl2303_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
-
- dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
-
- if (!count)
- return count;
-
- spin_lock_irqsave(&priv->lock, flags);
- count = pl2303_buf_put(priv->buf, buf, count);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- pl2303_send(port);
-
- return count;
-}
-
static void pl2303_send(struct usb_serial_port *port)
{
int count, result;
usb_serial_port_softint(port);
}
+static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
+ int count)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
+
+ if (!count)
+ return count;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ count = pl2303_buf_put(priv->buf, buf, count);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ pl2303_send(port);
+
+ return count;
+}
+
static int pl2303_write_room(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
}
static void pl2303_set_termios(struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
0x0, index, NULL, 0, 100);
dbg("0x40:0x1:0x0:0x%x %d", index, i);
}
-
- kfree(buf);
+
+ kfree(buf);
+}
+
+static void pl2303_close(struct usb_serial_port *port, struct file *filp)
+{
+ struct pl2303_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int c_cflag;
+ int bps;
+ long timeout;
+ wait_queue_t wait;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* wait for data to drain from the buffer */
+ spin_lock_irqsave(&priv->lock, flags);
+ timeout = PL2303_CLOSING_WAIT;
+ init_waitqueue_entry(&wait, current);
+ add_wait_queue(&port->tty->write_wait, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (pl2303_buf_data_avail(priv->buf) == 0 ||
+ timeout == 0 || signal_pending(current) ||
+ !usb_get_intfdata(port->serial->interface)) /* disconnect */
+ break;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ timeout = schedule_timeout(timeout);
+ spin_lock_irqsave(&priv->lock, flags);
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&port->tty->write_wait, &wait);
+ /* clear out any remaining data in the buffer */
+ pl2303_buf_clear(priv->buf);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* wait for characters to drain from the device */
+ /* (this is long enough for the entire 256 byte */
+ /* pl2303 hardware buffer to drain with no flow */
+ /* control for data rates of 1200 bps or more, */
+ /* for lower rates we should really know how much */
+ /* data is in the buffer to compute a delay */
+ /* that is not unnecessarily long) */
+ bps = tty_get_baud_rate(port->tty);
+ if (bps > 1200)
+ timeout = max((HZ*2560)/bps,HZ/10);
+ else
+ timeout = 2*HZ;
+ schedule_timeout_interruptible(timeout);
+
+ /* shutdown our urbs */
+ dbg("%s - shutting down urbs", __FUNCTION__);
+ usb_kill_urb(port->write_urb);
+ usb_kill_urb(port->read_urb);
+ usb_kill_urb(port->interrupt_in_urb);
+
+ if (port->tty) {
+ c_cflag = port->tty->termios->c_cflag;
+ if (c_cflag & HUPCL) {
+ /* drop DTR and RTS */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_control = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ set_control_lines(port->serial->dev, 0);
+ }
+ }
}
static int pl2303_open(struct usb_serial_port *port, struct file *filp)
{
- struct termios tmp_termios;
+ struct ktermios tmp_termios;
struct usb_serial *serial = port->serial;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned char *buf;
return 0;
}
-static void pl2303_close(struct usb_serial_port *port, struct file *filp)
-{
- struct pl2303_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- unsigned int c_cflag;
- int bps;
- long timeout;
- wait_queue_t wait;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- /* wait for data to drain from the buffer */
- spin_lock_irqsave(&priv->lock, flags);
- timeout = PL2303_CLOSING_WAIT;
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&port->tty->write_wait, &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (pl2303_buf_data_avail(priv->buf) == 0 ||
- timeout == 0 || signal_pending(current) ||
- !usb_get_intfdata(port->serial->interface)) /* disconnect */
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->tty->write_wait, &wait);
- /* clear out any remaining data in the buffer */
- pl2303_buf_clear(priv->buf);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- bps = tty_get_baud_rate(port->tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
- else
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
-
- /* shutdown our urbs */
- dbg("%s - shutting down urbs", __FUNCTION__);
- usb_kill_urb(port->write_urb);
- usb_kill_urb(port->read_urb);
- usb_kill_urb(port->interrupt_in_urb);
-
- if (port->tty) {
- c_cflag = port->tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
- set_control_lines(port->serial->dev, 0);
- }
- }
-}
-
static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
unsigned long flags;
u8 status_idx = UART_STATE;
u8 length = UART_STATE + 1;
+ u16 idv, idp;
- if ((le16_to_cpu(port->serial->dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
- (le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X65 ||
- le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_SX1 ||
- le16_to_cpu(port->serial->dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_X75)) {
- length = 1;
- status_idx = 0;
+ idv = le16_to_cpu(port->serial->dev->descriptor.idVendor);
+ idp = le16_to_cpu(port->serial->dev->descriptor.idProduct);
+
+
+ if (idv == SIEMENS_VENDOR_ID) {
+ if (idp == SIEMENS_PRODUCT_ID_X65 ||
+ idp == SIEMENS_PRODUCT_ID_SX1 ||
+ idp == SIEMENS_PRODUCT_ID_X75) {
+
+ length = 1;
+ status_idx = 0;
+ }
}
if (actual_length < length)
wake_up_interruptible(&priv->delta_msr_wait);
}
-static void pl2303_read_int_callback(struct urb *urb, struct pt_regs *regs)
+static void pl2303_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
unsigned char *data = urb->transfer_buffer;
__FUNCTION__, status);
}
-static void pl2303_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
+static void pl2303_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
return;
}
-static void pl2303_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+static void pl2303_write_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
pl2303_send(port);
}
-/*
- * pl2303_buf_alloc
- *
- * Allocate a circular buffer and all associated memory.
- */
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
-{
- struct pl2303_buf *pb;
-
- if (size == 0)
- return NULL;
-
- pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
- if (pb == NULL)
- return NULL;
-
- pb->buf_buf = kmalloc(size, GFP_KERNEL);
- if (pb->buf_buf == NULL) {
- kfree(pb);
- return NULL;
- }
-
- pb->buf_size = size;
- pb->buf_get = pb->buf_put = pb->buf_buf;
-
- return pb;
-}
-
-/*
- * pl2303_buf_free
- *
- * Free the buffer and all associated memory.
- */
-static void pl2303_buf_free(struct pl2303_buf *pb)
-{
- if (pb) {
- kfree(pb->buf_buf);
- kfree(pb);
- }
-}
-
-/*
- * pl2303_buf_clear
- *
- * Clear out all data in the circular buffer.
- */
-static void pl2303_buf_clear(struct pl2303_buf *pb)
-{
- if (pb != NULL)
- pb->buf_get = pb->buf_put;
- /* equivalent to a get of all data available */
-}
-
-/*
- * pl2303_buf_data_avail
- *
- * Return the number of bytes of data available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
-{
- if (pb == NULL)
- return 0;
-
- return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
-}
-
-/*
- * pl2303_buf_space_avail
- *
- * Return the number of bytes of space available in the circular
- * buffer.
- */
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
-{
- if (pb == NULL)
- return 0;
-
- return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
-}
-
-/*
- * pl2303_buf_put
- *
- * Copy data data from a user buffer and put it into the circular buffer.
- * Restrict to the amount of space available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
- unsigned int count)
-{
- unsigned int len;
-
- if (pb == NULL)
- return 0;
-
- len = pl2303_buf_space_avail(pb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = pb->buf_buf + pb->buf_size - pb->buf_put;
- if (count > len) {
- memcpy(pb->buf_put, buf, len);
- memcpy(pb->buf_buf, buf+len, count - len);
- pb->buf_put = pb->buf_buf + count - len;
- } else {
- memcpy(pb->buf_put, buf, count);
- if (count < len)
- pb->buf_put += count;
- else /* count == len */
- pb->buf_put = pb->buf_buf;
- }
-
- return count;
-}
-
-/*
- * pl2303_buf_get
- *
- * Get data from the circular buffer and copy to the given buffer.
- * Restrict to the amount of data available.
- *
- * Return the number of bytes copied.
- */
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
- unsigned int count)
-{
- unsigned int len;
-
- if (pb == NULL)
- return 0;
-
- len = pl2303_buf_data_avail(pb);
- if (count > len)
- count = len;
-
- if (count == 0)
- return 0;
-
- len = pb->buf_buf + pb->buf_size - pb->buf_get;
- if (count > len) {
- memcpy(buf, pb->buf_get, len);
- memcpy(buf+len, pb->buf_buf, count - len);
- pb->buf_get = pb->buf_buf + count - len;
- } else {
- memcpy(buf, pb->buf_get, count);
- if (count < len)
- pb->buf_get += count;
- else /* count == len */
- pb->buf_get = pb->buf_buf;
- }
-
- return count;
-}
+/* All of the device info needed for the PL2303 SIO serial converter */
+static struct usb_serial_driver pl2303_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pl2303",
+ },
+ .id_table = id_table,
+ .usb_driver = &pl2303_driver,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .open = pl2303_open,
+ .close = pl2303_close,
+ .write = pl2303_write,
+ .ioctl = pl2303_ioctl,
+ .break_ctl = pl2303_break_ctl,
+ .set_termios = pl2303_set_termios,
+ .tiocmget = pl2303_tiocmget,
+ .tiocmset = pl2303_tiocmset,
+ .read_bulk_callback = pl2303_read_bulk_callback,
+ .read_int_callback = pl2303_read_int_callback,
+ .write_bulk_callback = pl2303_write_bulk_callback,
+ .write_room = pl2303_write_room,
+ .chars_in_buffer = pl2303_chars_in_buffer,
+ .attach = pl2303_startup,
+ .shutdown = pl2303_shutdown,
+};
static int __init pl2303_init(void)
{
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff