* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
- * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * See Documentation/usb/usb-serial.txt for more information on using this
+ * driver
*
* TODO:
* - implement correct flushing for ioctls and oti6858_close()
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include "oti6858.h"
#define OTI6858_DESCRIPTION \
#define PL2303_BUF_SIZE 1024
#define PL2303_TMP_BUF_SIZE 1024
-struct pl2303_buf {
+struct oti6858_buf {
unsigned int buf_size;
char *buf_buf;
char *buf_get;
/* format of the control packet */
struct oti6858_control_pkt {
- u16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */
+ __le16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */
#define OTI6858_MAX_BAUD_RATE 3000000
u8 frame_fmt;
#define FMT_STOP_BITS_MASK 0xc0
#define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt)
#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \
- ( ((a)->divisor == (priv)->pending_setup.divisor) \
+ (((a)->divisor == (priv)->pending_setup.divisor) \
&& ((a)->control == (priv)->pending_setup.control) \
- && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) )
+ && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
/* function prototypes */
-static int oti6858_open(struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct usb_serial_port *port, struct file *filp);
-static void oti6858_set_termios(struct usb_serial_port *port,
- struct ktermios *old);
-static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void oti6858_close(struct usb_serial_port *port);
+static void oti6858_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old);
+static void oti6858_init_termios(struct tty_struct *tty);
+static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
static void oti6858_read_int_callback(struct urb *urb);
static void oti6858_read_bulk_callback(struct urb *urb);
static void oti6858_write_bulk_callback(struct urb *urb);
-static int oti6858_write(struct usb_serial_port *port,
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count);
-static int oti6858_write_room(struct usb_serial_port *port);
-static void oti6858_break_ctl(struct usb_serial_port *port, int break_state);
-static int oti6858_chars_in_buffer(struct usb_serial_port *port);
-static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file);
-static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
+static int oti6858_write_room(struct tty_struct *tty);
+static int oti6858_chars_in_buffer(struct tty_struct *tty);
+static int oti6858_tiocmget(struct tty_struct *tty, struct file *file);
+static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int oti6858_startup(struct usb_serial *serial);
-static void oti6858_shutdown(struct usb_serial *serial);
+static void oti6858_release(struct usb_serial *serial);
/* functions operating on buffers */
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size);
-static void pl2303_buf_free(struct pl2303_buf *pb);
-static void pl2303_buf_clear(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb);
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
+static struct oti6858_buf *oti6858_buf_alloc(unsigned int size);
+static void oti6858_buf_free(struct oti6858_buf *pb);
+static void oti6858_buf_clear(struct oti6858_buf *pb);
+static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb);
+static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb);
+static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
unsigned int count);
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
+static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
unsigned int count);
.name = "oti6858",
},
.id_table = id_table,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
.num_ports = 1,
.open = oti6858_open,
.close = oti6858_close,
.write = oti6858_write,
.ioctl = oti6858_ioctl,
- .break_ctl = oti6858_break_ctl,
.set_termios = oti6858_set_termios,
+ .init_termios = oti6858_init_termios,
.tiocmget = oti6858_tiocmget,
.tiocmset = oti6858_tiocmset,
.read_bulk_callback = oti6858_read_bulk_callback,
.write_room = oti6858_write_room,
.chars_in_buffer = oti6858_chars_in_buffer,
.attach = oti6858_startup,
- .shutdown = oti6858_shutdown,
+ .release = oti6858_release,
};
struct oti6858_private {
spinlock_t lock;
- struct pl2303_buf *buf;
+ struct oti6858_buf *buf;
struct oti6858_control_pkt status;
struct {
u8 read_urb_in_use;
u8 write_urb_in_use;
- u8 termios_initialized;
} flags;
struct delayed_work delayed_write_work;
struct {
- u16 divisor;
+ __le16 divisor;
u8 frame_fmt;
u8 control;
} pending_setup;
struct delayed_work delayed_setup_work;
wait_queue_head_t intr_wait;
- struct usb_serial_port *port; /* USB port with which associated */
+ struct usb_serial_port *port; /* USB port with which associated */
};
-#undef dbg
-/* #define dbg(format, arg...) printk(KERN_INFO "%s: " format "\n", __FILE__, ## arg) */
-#define dbg(format, arg...) printk(KERN_INFO "" format "\n", ## arg)
-
static void setup_line(struct work_struct *work)
{
- struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_setup_work.work);
+ struct oti6858_private *priv = container_of(work,
+ struct oti6858_private, delayed_setup_work.work);
struct usb_serial_port *port = priv->port;
struct oti6858_control_pkt *new_setup;
unsigned long flags;
int result;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
- if ((new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
- dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__);
+ new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
+ if (new_setup == NULL) {
+ dev_err(&port->dev, "%s(): out of memory!\n", __func__);
/* we will try again */
- schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
+ schedule_delayed_work(&priv->delayed_setup_work,
+ msecs_to_jiffies(2));
return;
}
100);
if (result != OTI6858_CTRL_PKT_SIZE) {
- dev_err(&port->dev, "%s(): error reading status", __FUNCTION__);
+ dev_err(&port->dev, "%s(): error reading status\n", __func__);
kfree(new_setup);
/* we will try again */
- schedule_delayed_work(&priv->delayed_setup_work, msecs_to_jiffies(2));
+ schedule_delayed_work(&priv->delayed_setup_work,
+ msecs_to_jiffies(2));
return;
}
priv->setup_done = 1;
spin_unlock_irqrestore(&priv->lock, flags);
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
+ " with error %d\n", __func__, result);
}
}
void send_data(struct work_struct *work)
{
- struct oti6858_private *priv = container_of(work, struct oti6858_private, delayed_write_work.work);
+ struct oti6858_private *priv = container_of(work,
+ struct oti6858_private, delayed_write_work.work);
struct usb_serial_port *port = priv->port;
int count = 0, result;
unsigned long flags;
unsigned char allow;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
if (priv->flags.write_urb_in_use) {
spin_unlock_irqrestore(&priv->lock, flags);
- schedule_delayed_work(&priv->delayed_write_work, msecs_to_jiffies(2));
+ schedule_delayed_work(&priv->delayed_write_work,
+ msecs_to_jiffies(2));
return;
}
priv->flags.write_urb_in_use = 1;
- count = pl2303_buf_data_avail(priv->buf);
+ count = oti6858_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
if (count > port->bulk_out_size)
count = port->bulk_out_size;
if (count == 0) {
priv->flags.write_urb_in_use = 0;
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
+ " with error %d\n", __func__, result);
}
return;
}
spin_lock_irqsave(&priv->lock, flags);
- pl2303_buf_get(priv->buf, port->write_urb->transfer_buffer, count);
+ oti6858_buf_get(priv->buf, port->write_urb->transfer_buffer, count);
spin_unlock_irqrestore(&priv->lock, flags);
port->write_urb->transfer_buffer_length = count;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
+ " with error %d\n", __func__, result);
priv->flags.write_urb_in_use = 0;
}
static int oti6858_startup(struct usb_serial *serial)
{
- struct usb_serial_port *port = serial->port[0];
- struct oti6858_private *priv;
+ struct usb_serial_port *port = serial->port[0];
+ struct oti6858_private *priv;
int i;
for (i = 0; i < serial->num_ports; ++i) {
priv = kzalloc(sizeof(struct oti6858_private), GFP_KERNEL);
if (!priv)
break;
- priv->buf = pl2303_buf_alloc(PL2303_BUF_SIZE);
+ priv->buf = oti6858_buf_alloc(PL2303_BUF_SIZE);
if (priv->buf == NULL) {
kfree(priv);
break;
spin_lock_init(&priv->lock);
init_waitqueue_head(&priv->intr_wait);
-// INIT_WORK(&priv->setup_work, setup_line, serial->port[i]);
-// INIT_WORK(&priv->write_work, send_data, serial->port[i]);
+/* INIT_WORK(&priv->setup_work, setup_line, serial->port[i]); */
+/* INIT_WORK(&priv->write_work, send_data, serial->port[i]); */
priv->port = port;
INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
for (--i; i >= 0; --i) {
priv = usb_get_serial_port_data(serial->port[i]);
- pl2303_buf_free(priv->buf);
+ oti6858_buf_free(priv->buf);
kfree(priv);
usb_set_serial_port_data(serial->port[i], NULL);
}
return -ENOMEM;
}
-static int oti6858_write(struct usb_serial_port *port,
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
const unsigned char *buf, int count)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s(port = %d, count = %d)", __FUNCTION__, port->number, count);
+ dbg("%s(port = %d, count = %d)", __func__, port->number, count);
if (!count)
return count;
spin_lock_irqsave(&priv->lock, flags);
- count = pl2303_buf_put(priv->buf, buf, count);
+ count = oti6858_buf_put(priv->buf, buf, count);
spin_unlock_irqrestore(&priv->lock, flags);
return count;
}
-static int oti6858_write_room(struct usb_serial_port *port)
+static int oti6858_write_room(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct oti6858_private *priv = usb_get_serial_port_data(port);
int room = 0;
unsigned long flags;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
- room = pl2303_buf_space_avail(priv->buf);
+ room = oti6858_buf_space_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
return room;
}
-static int oti6858_chars_in_buffer(struct usb_serial_port *port)
+static int oti6858_chars_in_buffer(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct oti6858_private *priv = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
- chars = pl2303_buf_data_avail(priv->buf);
+ chars = oti6858_buf_data_avail(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
return chars;
}
-static void oti6858_set_termios(struct usb_serial_port *port,
- struct ktermios *old_termios)
+static void oti6858_init_termios(struct tty_struct *tty)
+{
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 38400;
+ tty->termios->c_ospeed = 38400;
+}
+
+static void oti6858_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int cflag;
u8 frame_fmt, control;
- u16 divisor;
+ __le16 divisor;
int br;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s(): no tty structures", __FUNCTION__);
+ if (!tty) {
+ dbg("%s(): no tty structures", __func__);
return;
}
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->flags.termios_initialized) {
- *(port->tty->termios) = tty_std_termios;
- port->tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
- priv->flags.termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
- cflag = port->tty->termios->c_cflag;
+ cflag = tty->termios->c_cflag;
spin_lock_irqsave(&priv->lock, flags);
divisor = priv->pending_setup.divisor;
frame_fmt &= ~FMT_DATA_BITS_MASK;
switch (cflag & CSIZE) {
- case CS5:
- frame_fmt |= FMT_DATA_BITS_5;
- break;
- case CS6:
- frame_fmt |= FMT_DATA_BITS_6;
- break;
- case CS7:
- frame_fmt |= FMT_DATA_BITS_7;
- break;
- default:
- case CS8:
- frame_fmt |= FMT_DATA_BITS_8;
- break;
+ case CS5:
+ frame_fmt |= FMT_DATA_BITS_5;
+ break;
+ case CS6:
+ frame_fmt |= FMT_DATA_BITS_6;
+ break;
+ case CS7:
+ frame_fmt |= FMT_DATA_BITS_7;
+ break;
+ default:
+ case CS8:
+ frame_fmt |= FMT_DATA_BITS_8;
+ break;
}
/* manufacturer claims that this device can work with baud rates
* guarantee that any other baud rate will work (especially
* the higher ones)
*/
- br = tty_get_baud_rate(port->tty);
+ br = tty_get_baud_rate(tty);
if (br == 0) {
divisor = 0;
- } else if (br <= OTI6858_MAX_BAUD_RATE) {
+ } else {
int real_br;
+ int new_divisor;
+ br = min(br, OTI6858_MAX_BAUD_RATE);
- divisor = (96000000 + 8 * br) / (16 * br);
- real_br = 96000000 / (16 * divisor);
- if ((((real_br - br) * 100 + br - 1) / br) > 2) {
- dbg("%s(): baud rate %d is invalid", __FUNCTION__, br);
- return;
- }
- divisor = cpu_to_le16(divisor);
- } else {
- dbg("%s(): baud rate %d is too high", __FUNCTION__, br);
- return;
+ new_divisor = (96000000 + 8 * br) / (16 * br);
+ real_br = 96000000 / (16 * new_divisor);
+ divisor = cpu_to_le16(new_divisor);
+ tty_encode_baud_rate(tty, real_br, real_br);
}
frame_fmt &= ~FMT_STOP_BITS_MASK;
- if ((cflag & CSTOPB) != 0) {
+ if ((cflag & CSTOPB) != 0)
frame_fmt |= FMT_STOP_BITS_2;
- } else {
+ else
frame_fmt |= FMT_STOP_BITS_1;
- }
frame_fmt &= ~FMT_PARITY_MASK;
if ((cflag & PARENB) != 0) {
- if ((cflag & PARODD) != 0) {
+ if ((cflag & PARODD) != 0)
frame_fmt |= FMT_PARITY_ODD;
- } else {
+ else
frame_fmt |= FMT_PARITY_EVEN;
- }
} else {
frame_fmt |= FMT_PARITY_NONE;
}
spin_unlock_irqrestore(&priv->lock, flags);
}
-static int oti6858_open(struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
struct ktermios tmp_termios;
unsigned long flags;
int result;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
- if (port->open_count != 1)
+ if (port->port.count != 1)
return 0;
- if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
- dev_err(&port->dev, "%s(): out of memory!\n", __FUNCTION__);
+ buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
+ if (buf == NULL) {
+ dev_err(&port->dev, "%s(): out of memory!\n", __func__);
return -ENOMEM;
}
spin_unlock_irqrestore(&priv->lock, flags);
kfree(buf);
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
- " with error %d\n", __FUNCTION__, result);
- oti6858_close(port, NULL);
+ " with error %d\n", __func__, result);
+ oti6858_close(port);
return -EPROTO;
}
/* setup termios */
- if (port->tty)
- oti6858_set_termios(port, &tmp_termios);
-
+ if (tty)
+ oti6858_set_termios(tty, port, &tmp_termios);
+ port->port.drain_delay = 256; /* FIXME: check the FIFO length */
return 0;
}
-static void oti6858_close(struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct usb_serial_port *port)
{
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
- long timeout;
- wait_queue_t wait;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
- /* wait for data to drain from the buffer */
spin_lock_irqsave(&priv->lock, flags);
- timeout = 30 * HZ; /* PL2303_CLOSING_WAIT */
- init_waitqueue_entry(&wait, current);
- add_wait_queue(&port->tty->write_wait, &wait);
- dbg("%s(): entering wait loop", __FUNCTION__);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (pl2303_buf_data_avail(priv->buf) == 0
- || timeout == 0 || signal_pending(current)
- || !usb_get_intfdata(port->serial->interface)) /* disconnect */
- break;
- spin_unlock_irqrestore(&priv->lock, flags);
- timeout = schedule_timeout(timeout);
- spin_lock_irqsave(&priv->lock, flags);
- }
- set_current_state(TASK_RUNNING);
- remove_wait_queue(&port->tty->write_wait, &wait);
- dbg("%s(): after wait loop", __FUNCTION__);
-
/* clear out any remaining data in the buffer */
- pl2303_buf_clear(priv->buf);
+ oti6858_buf_clear(priv->buf);
spin_unlock_irqrestore(&priv->lock, flags);
- /* wait for characters to drain from the device */
- /* (this is long enough for the entire 256 byte */
- /* pl2303 hardware buffer to drain with no flow */
- /* control for data rates of 1200 bps or more, */
- /* for lower rates we should really know how much */
- /* data is in the buffer to compute a delay */
- /* that is not unnecessarily long) */
- /* FIXME
- bps = tty_get_baud_rate(port->tty);
- if (bps > 1200)
- timeout = max((HZ*2560)/bps,HZ/10);
- else
- */
- timeout = 2*HZ;
- schedule_timeout_interruptible(timeout);
- dbg("%s(): after schedule_timeout_interruptible()", __FUNCTION__);
+ dbg("%s(): after buf_clear()", __func__);
/* cancel scheduled setup */
cancel_delayed_work(&priv->delayed_setup_work);
flush_scheduled_work();
/* shutdown our urbs */
- dbg("%s(): shutting down urbs", __FUNCTION__);
+ dbg("%s(): shutting down urbs", __func__);
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
-
- /*
- if (port->tty && (port->tty->termios->c_cflag) & HUPCL) {
- // drop DTR and RTS
- spin_lock_irqsave(&priv->lock, flags);
- priv->pending_setup.control &= ~CONTROL_MASK;
- spin_unlock_irqrestore(&priv->lock, flags);
- }
- */
}
-static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
+static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
+ struct usb_serial_port *port = tty->driver_data;
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
dbg("%s(port = %d, set = 0x%08x, clear = 0x%08x)",
- __FUNCTION__, port->number, set, clear);
+ __func__, port->number, set, clear);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
if ((clear & TIOCM_DTR) != 0)
control &= ~CONTROL_DTR_HIGH;
- if (control != priv->pending_setup.control) {
+ if (control != priv->pending_setup.control)
priv->pending_setup.control = control;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
-static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file)
+static int oti6858_tiocmget(struct tty_struct *tty, struct file *file)
{
+ struct usb_serial_port *port = tty->driver_data;
struct oti6858_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned pin_state;
unsigned result = 0;
- dbg("%s(port = %d)", __FUNCTION__, port->number);
+ dbg("%s(port = %d)", __func__, port->number);
if (!usb_get_intfdata(port->serial->interface))
return -ENODEV;
if ((pin_state & PIN_DCD) != 0)
result |= TIOCM_CD;
- dbg("%s() = 0x%08x", __FUNCTION__, result);
+ dbg("%s() = 0x%08x", __func__, result);
return result;
}
spin_unlock_irqrestore(&priv->lock, flags);
while (1) {
- wait_event_interruptible(priv->intr_wait, priv->status.pin_state != prev);
+ wait_event_interruptible(priv->intr_wait,
+ priv->status.pin_state != prev);
if (signal_pending(current))
return -ERESTARTSYS;
changed = prev ^ status;
/* FIXME: check if this is correct (active high/low) */
- if ( ((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
- ((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
- ((arg & TIOCM_CD) && (changed & PIN_DCD)) ||
- ((arg & TIOCM_CTS) && (changed & PIN_CTS))) {
- return 0;
- }
+ if (((arg & TIOCM_RNG) && (changed & PIN_RI)) ||
+ ((arg & TIOCM_DSR) && (changed & PIN_DSR)) ||
+ ((arg & TIOCM_CD) && (changed & PIN_DCD)) ||
+ ((arg & TIOCM_CTS) && (changed & PIN_CTS)))
+ return 0;
prev = status;
}
return 0;
}
-static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
+static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
- void __user *user_arg = (void __user *) arg;
- unsigned int x;
+ struct usb_serial_port *port = tty->driver_data;
dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
- __FUNCTION__, port->number, cmd, arg);
+ __func__, port->number, cmd, arg);
switch (cmd) {
- case TCFLSH:
- /* FIXME */
- return 0;
-
- case TIOCMBIS:
- if (copy_from_user(&x, user_arg, sizeof(x)))
- return -EFAULT;
- return oti6858_tiocmset(port, NULL, x, 0);
-
- case TIOCMBIC:
- if (copy_from_user(&x, user_arg, sizeof(x)))
- return -EFAULT;
- return oti6858_tiocmset(port, NULL, 0, x);
-
- case TIOCGSERIAL:
- if (copy_to_user(user_arg, port->tty->termios,
- sizeof(struct ktermios))) {
- return -EFAULT;
- }
- return 0;
-
- case TIOCSSERIAL:
- if (copy_from_user(port->tty->termios, user_arg,
- sizeof(struct ktermios))) {
- return -EFAULT;
- }
- oti6858_set_termios(port, NULL);
- return 0;
-
- case TIOCMIWAIT:
- dbg("%s(): TIOCMIWAIT", __FUNCTION__);
- return wait_modem_info(port, arg);
-
- default:
- dbg("%s(): 0x%04x not supported", __FUNCTION__, cmd);
- break;
+ case TIOCMIWAIT:
+ dbg("%s(): TIOCMIWAIT", __func__);
+ return wait_modem_info(port, arg);
+ default:
+ dbg("%s(): 0x%04x not supported", __func__, cmd);
+ break;
}
-
return -ENOIOCTLCMD;
}
-static void oti6858_break_ctl(struct usb_serial_port *port, int break_state)
-{
- int state;
-
- dbg("%s(port = %d)", __FUNCTION__, port->number);
-
- state = (break_state == 0) ? 0 : 1;
- dbg("%s(): turning break %s", __FUNCTION__, state ? "on" : "off");
-
- /* FIXME */
-/*
- result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
- BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
- 0, NULL, 0, 100);
- if (result != 0)
- dbg("%s(): error sending break", __FUNCTION__);
- */
-}
-static void oti6858_shutdown(struct usb_serial *serial)
+static void oti6858_release(struct usb_serial *serial)
{
struct oti6858_private *priv;
int i;
- dbg("%s()", __FUNCTION__);
+ dbg("%s()", __func__);
for (i = 0; i < serial->num_ports; ++i) {
priv = usb_get_serial_port_data(serial->port[i]);
if (priv) {
- pl2303_buf_free(priv->buf);
+ oti6858_buf_free(priv->buf);
kfree(priv);
- usb_set_serial_port_data(serial->port[i], NULL);
}
}
}
static void oti6858_read_int_callback(struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ struct usb_serial_port *port = urb->context;
struct oti6858_private *priv = usb_get_serial_port_data(port);
int transient = 0, can_recv = 0, resubmit = 1;
int status = urb->status;
dbg("%s(port = %d, status = %d)",
- __FUNCTION__, port->number, status);
+ __func__, port->number, status);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s(): nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
break;
}
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
- __FUNCTION__);
+ __func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
priv->setup_done = 0;
resubmit = 0;
dbg("%s(): scheduling setup_line()",
- __FUNCTION__);
+ __func__);
schedule_delayed_work(&priv->delayed_setup_work, 0);
}
}
if (result != 0) {
priv->flags.read_urb_in_use = 0;
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
} else {
resubmit = 0;
}
spin_lock_irqsave(&priv->lock, flags);
if (priv->flags.write_urb_in_use == 0
- && pl2303_buf_data_avail(priv->buf) != 0) {
- schedule_delayed_work(&priv->delayed_write_work,0);
+ && oti6858_buf_data_avail(priv->buf) != 0) {
+ schedule_delayed_work(&priv->delayed_write_work, 0);
resubmit = 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
if (resubmit) {
int result;
-// dbg("%s(): submitting interrupt urb", __FUNCTION__);
+/* dbg("%s(): submitting interrupt urb", __func__); */
urb->dev = port->serial->dev;
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&urb->dev->dev,
"%s(): usb_submit_urb() failed with"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
}
}
}
static void oti6858_read_bulk_callback(struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ struct usb_serial_port *port = urb->context;
struct oti6858_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
unsigned long flags;
- int i, result;
int status = urb->status;
- char tty_flag;
+ int result;
dbg("%s(port = %d, status = %d)",
- __FUNCTION__, port->number, status);
+ __func__, port->number, status);
spin_lock_irqsave(&priv->lock, flags);
priv->flags.read_urb_in_use = 0;
spin_unlock_irqrestore(&priv->lock, flags);
if (status != 0) {
- if (!port->open_count) {
- dbg("%s(): port is closed, exiting", __FUNCTION__);
+ if (!port->port.count) {
+ dbg("%s(): port is closed, exiting", __func__);
return;
}
/*
if (status == -EPROTO) {
- // PL2303 mysteriously fails with -EPROTO reschedule the read
- dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
+ * PL2303 mysteriously fails with -EPROTO reschedule
+ the read *
+ dbg("%s - caught -EPROTO, resubmitting the urb",
+ __func__);
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
return;
}
*/
- dbg("%s(): unable to handle the error, exiting", __FUNCTION__);
+ dbg("%s(): unable to handle the error, exiting", __func__);
return;
}
- // get tty_flag from status
- tty_flag = TTY_NORMAL;
-
-/* FIXME: probably, errors will be signalled using interrupt pipe! */
-/*
- // break takes precedence over parity,
- // which takes precedence over framing errors
- if (status & UART_BREAK_ERROR )
- tty_flag = TTY_BREAK;
- else if (status & UART_PARITY_ERROR)
- tty_flag = TTY_PARITY;
- else if (status & UART_FRAME_ERROR)
- tty_flag = TTY_FRAME;
- dbg("%s - tty_flag = %d", __FUNCTION__, tty_flag);
-*/
-
- tty = port->tty;
+ tty = tty_port_tty_get(&port->port);
if (tty != NULL && urb->actual_length > 0) {
- tty_buffer_request_room(tty, urb->actual_length);
- for (i = 0; i < urb->actual_length; ++i)
- tty_insert_flip_char(tty, data[i], tty_flag);
+ tty_insert_flip_string(tty, data, urb->actual_length);
tty_flip_buffer_push(tty);
}
+ tty_kref_put(tty);
- // schedule the interrupt urb if we are still open */
- if (port->open_count != 0) {
+ /* schedule the interrupt urb if we are still open */
+ if (port->port.count != 0) {
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
}
}
}
static void oti6858_write_bulk_callback(struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ struct usb_serial_port *port = urb->context;
struct oti6858_private *priv = usb_get_serial_port_data(port);
int status = urb->status;
int result;
dbg("%s(port = %d, status = %d)",
- __FUNCTION__, port->number, status);
+ __func__, port->number, status);
switch (status) {
case 0:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s(): urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
priv->flags.write_urb_in_use = 0;
return;
default:
/* error in the urb, so we have to resubmit it */
dbg("%s(): nonzero write bulk status received: %d",
- __FUNCTION__, status);
- dbg("%s(): overflow in write", __FUNCTION__);
+ __func__, status);
+ dbg("%s(): overflow in write", __func__);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
} else {
return;
}
priv->flags.write_urb_in_use = 0;
- // schedule the interrupt urb if we are still open */
+ /* schedule the interrupt urb if we are still open */
port->interrupt_in_urb->dev = port->serial->dev;
- dbg("%s(): submitting interrupt urb", __FUNCTION__);
+ dbg("%s(): submitting interrupt urb", __func__);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result != 0) {
dev_err(&port->dev, "%s(): failed submitting int urb,"
- " error %d\n", __FUNCTION__, result);
+ " error %d\n", __func__, result);
}
}
/*
- * pl2303_buf_alloc
+ * oti6858_buf_alloc
*
* Allocate a circular buffer and all associated memory.
*/
-static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
+static struct oti6858_buf *oti6858_buf_alloc(unsigned int size)
{
- struct pl2303_buf *pb;
+ struct oti6858_buf *pb;
if (size == 0)
return NULL;
- pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+ pb = kmalloc(sizeof(struct oti6858_buf), GFP_KERNEL);
if (pb == NULL)
return NULL;
}
/*
- * pl2303_buf_free
+ * oti6858_buf_free
*
* Free the buffer and all associated memory.
*/
-static void pl2303_buf_free(struct pl2303_buf *pb)
+static void oti6858_buf_free(struct oti6858_buf *pb)
{
if (pb) {
kfree(pb->buf_buf);
}
/*
- * pl2303_buf_clear
+ * oti6858_buf_clear
*
* Clear out all data in the circular buffer.
*/
-static void pl2303_buf_clear(struct pl2303_buf *pb)
+static void oti6858_buf_clear(struct oti6858_buf *pb)
{
if (pb != NULL) {
/* equivalent to a get of all data available */
}
/*
- * pl2303_buf_data_avail
+ * oti6858_buf_data_avail
*
* Return the number of bytes of data available in the circular
* buffer.
*/
-static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
+static unsigned int oti6858_buf_data_avail(struct oti6858_buf *pb)
{
if (pb == NULL)
return 0;
- return ((pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size);
+ return (pb->buf_size + pb->buf_put - pb->buf_get) % pb->buf_size;
}
/*
- * pl2303_buf_space_avail
+ * oti6858_buf_space_avail
*
* Return the number of bytes of space available in the circular
* buffer.
*/
-static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
+static unsigned int oti6858_buf_space_avail(struct oti6858_buf *pb)
{
if (pb == NULL)
return 0;
- return ((pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size);
+ return (pb->buf_size + pb->buf_get - pb->buf_put - 1) % pb->buf_size;
}
/*
- * pl2303_buf_put
+ * oti6858_buf_put
*
* Copy data data from a user buffer and put it into the circular buffer.
* Restrict to the amount of space available.
*
* Return the number of bytes copied.
*/
-static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
+static unsigned int oti6858_buf_put(struct oti6858_buf *pb, const char *buf,
unsigned int count)
{
unsigned int len;
if (pb == NULL)
return 0;
- len = pl2303_buf_space_avail(pb);
+ len = oti6858_buf_space_avail(pb);
if (count > len)
count = len;
}
/*
- * pl2303_buf_get
+ * oti6858_buf_get
*
* Get data from the circular buffer and copy to the given buffer.
* Restrict to the amount of data available.
*
* Return the number of bytes copied.
*/
-static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
+static unsigned int oti6858_buf_get(struct oti6858_buf *pb, char *buf,
unsigned int count)
{
unsigned int len;
if (pb == NULL)
return 0;
- len = pl2303_buf_data_avail(pb);
+ len = oti6858_buf_data_avail(pb);
if (count > len)
count = len;
{
int retval;
- if ((retval = usb_serial_register(&oti6858_device)) == 0) {
- if ((retval = usb_register(&oti6858_driver)) != 0)
+ retval = usb_serial_register(&oti6858_device);
+ if (retval == 0) {
+ retval = usb_register(&oti6858_driver);
+ if (retval)
usb_serial_deregister(&oti6858_device);
- else
- return 0;
}
-
return retval;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff