*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* [ Initialisation is based on Linus' ]
* [ uhci code and gregs ohci fragments ]
* [ (C) Copyright 1999 Linus Torvalds ]
* [ (C) Copyright 1999 Gregory P. Smith]
- *
+ *
* PCI Bus Glue
*
* This file is licenced under the GPL.
*/
-
-#ifdef CONFIG_PPC_PMAC
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#endif
#ifndef CONFIG_PCI
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
#endif
+#include <linux/pci.h>
+#include <linux/io.h>
+
+
+/* constants used to work around PM-related transfer
+ * glitches in some AMD 700 series southbridges
+ */
+#define AB_REG_BAR 0xf0
+#define AB_INDX(addr) ((addr) + 0x00)
+#define AB_DATA(addr) ((addr) + 0x04)
+#define AX_INDXC 0X30
+#define AX_DATAC 0x34
+
+#define NB_PCIE_INDX_ADDR 0xe0
+#define NB_PCIE_INDX_DATA 0xe4
+#define PCIE_P_CNTL 0x10040
+#define BIF_NB 0x10002
+
+static struct pci_dev *amd_smbus_dev;
+static struct pci_dev *amd_hb_dev;
+static int amd_ohci_iso_count;
+
/*-------------------------------------------------------------------------*/
-static int
-ohci_pci_reset (struct usb_hcd *hcd)
+static int broken_suspend(struct usb_hcd *hcd)
+{
+ device_init_wakeup(&hcd->self.root_hub->dev, 0);
+ return 0;
+}
+
+/* AMD 756, for most chips (early revs), corrupts register
+ * values on read ... so enable the vendor workaround.
+ */
+static int ohci_quirk_amd756(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- ohci_hcd_init (ohci);
- return ohci_init (ohci);
+ ohci->flags = OHCI_QUIRK_AMD756;
+ ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
+
+ /* also erratum 10 (suspend/resume issues) */
+ return broken_suspend(hcd);
}
-static int __devinit
-ohci_pci_start (struct usb_hcd *hcd)
+/* Apple's OHCI driver has a lot of bizarre workarounds
+ * for this chip. Evidently control and bulk lists
+ * can get confused. (B&W G3 models, and ...)
+ */
+static int ohci_quirk_opti(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
- if(hcd->self.controller && hcd->self.controller->bus == &pci_bus_type) {
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
- /* AMD 756, for most chips (early revs), corrupts register
- * values on read ... so enable the vendor workaround.
- */
- if (pdev->vendor == PCI_VENDOR_ID_AMD
- && pdev->device == 0x740c) {
- ohci->flags = OHCI_QUIRK_AMD756;
- ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
- // also somewhat erratum 10 (suspend/resume issues)
- }
+ return 0;
+}
- /* FIXME for some of the early AMD 760 southbridges, OHCI
- * won't work at all. blacklist them.
- */
+/* Check for NSC87560. We have to look at the bridge (fn1) to
+ * identify the USB (fn2). This quirk might apply to more or
+ * even all NSC stuff.
+ */
+static int ohci_quirk_ns(struct usb_hcd *hcd)
+{
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ struct pci_dev *b;
- /* Apple's OHCI driver has a lot of bizarre workarounds
- * for this chip. Evidently control and bulk lists
- * can get confused. (B&W G3 models, and ...)
- */
- else if (pdev->vendor == PCI_VENDOR_ID_OPTI
- && pdev->device == 0xc861) {
- ohci_dbg (ohci,
- "WARNING: OPTi workarounds unavailable\n");
+ b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
+ if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
+ && b->vendor == PCI_VENDOR_ID_NS) {
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_SUPERIO;
+ ohci_dbg (ohci, "Using NSC SuperIO setup\n");
+ }
+ pci_dev_put(b);
+
+ return 0;
+}
+
+/* Check for Compaq's ZFMicro chipset, which needs short
+ * delays before control or bulk queues get re-activated
+ * in finish_unlinks()
+ */
+static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_ZFMICRO;
+ ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
+
+ return 0;
+}
+
+/* Check for Toshiba SCC OHCI which has big endian registers
+ * and little endian in memory data structures
+ */
+static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ /* That chip is only present in the southbridge of some
+ * cell based platforms which are supposed to select
+ * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
+ * that was the case though.
+ */
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ ohci->flags |= OHCI_QUIRK_BE_MMIO;
+ ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
+ return 0;
+#else
+ ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
+ return -ENXIO;
+#endif
+}
+
+/* Check for NEC chip and apply quirk for allegedly lost interrupts.
+ */
+
+static void ohci_quirk_nec_worker(struct work_struct *work)
+{
+ struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
+ int status;
+
+ status = ohci_init(ohci);
+ if (status != 0) {
+ ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+ "ohci_init", status);
+ return;
+ }
+
+ status = ohci_restart(ohci);
+ if (status != 0)
+ ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
+ "ohci_restart", status);
+}
+
+static int ohci_quirk_nec(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_NEC;
+ INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
+ ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
+
+ return 0;
+}
+
+static int ohci_quirk_amd700(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ u8 rev = 0;
+
+ if (!amd_smbus_dev)
+ amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
+ PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
+ if (!amd_smbus_dev)
+ return 0;
+
+ pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+
+ /* SB800 needs pre-fetch fix */
+ if ((rev >= 0x40) && (rev <= 0x4f)) {
+ ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
+ ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
+ }
+
+ if ((rev > 0x3b) || (rev < 0x30)) {
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+ return 0;
+ }
+
+ amd_ohci_iso_count++;
+
+ if (!amd_hb_dev)
+ amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL);
+
+ ohci->flags |= OHCI_QUIRK_AMD_ISO;
+ ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n");
+
+ return 0;
+}
+
+/*
+ * The hardware normally enables the A-link power management feature, which
+ * lets the system lower the power consumption in idle states.
+ *
+ * Assume the system is configured to have USB 1.1 ISO transfers going
+ * to or from a USB device. Without this quirk, that stream may stutter
+ * or have breaks occasionally. For transfers going to speakers, this
+ * makes a very audible mess...
+ *
+ * That audio playback corruption is due to the audio stream getting
+ * interrupted occasionally when the link goes in lower power state
+ * This USB quirk prevents the link going into that lower power state
+ * during audio playback or other ISO operations.
+ */
+static void quirk_amd_pll(int on)
+{
+ u32 addr;
+ u32 val;
+ u32 bit = (on > 0) ? 1 : 0;
+
+ pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr);
+
+ /* BIT names/meanings are NDA-protected, sorry ... */
+
+ outl(AX_INDXC, AB_INDX(addr));
+ outl(0x40, AB_DATA(addr));
+ outl(AX_DATAC, AB_INDX(addr));
+ val = inl(AB_DATA(addr));
+ val &= ~((1 << 3) | (1 << 4) | (1 << 9));
+ val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9);
+ outl(val, AB_DATA(addr));
+
+ if (amd_hb_dev) {
+ addr = PCIE_P_CNTL;
+ pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+ pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+ val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12));
+ val |= bit | (bit << 3) | (bit << 12);
+ val |= ((!bit) << 4) | ((!bit) << 9);
+ pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+
+ addr = BIF_NB;
+ pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr);
+
+ pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val);
+ val &= ~(1 << 8);
+ val |= bit << 8;
+ pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val);
+ }
+}
+
+static void amd_iso_dev_put(void)
+{
+ amd_ohci_iso_count--;
+ if (amd_ohci_iso_count == 0) {
+ if (amd_smbus_dev) {
+ pci_dev_put(amd_smbus_dev);
+ amd_smbus_dev = NULL;
+ }
+ if (amd_hb_dev) {
+ pci_dev_put(amd_hb_dev);
+ amd_hb_dev = NULL;
}
+ }
- /* Check for NSC87560. We have to look at the bridge (fn1) to
- * identify the USB (fn2). This quirk might apply to more or
- * even all NSC stuff.
- */
- else if (pdev->vendor == PCI_VENDOR_ID_NS) {
- struct pci_dev *b;
-
- b = pci_find_slot (pdev->bus->number,
- PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
- if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
- && b->vendor == PCI_VENDOR_ID_NS) {
- ohci->flags |= OHCI_QUIRK_SUPERIO;
- ohci_dbg (ohci, "Using NSC SuperIO setup\n");
- }
+}
+
+static void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+ struct pci_dev *pdev;
+ u16 misc;
+
+ pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
+ pci_read_config_word(pdev, 0x50, &misc);
+ if (on == 0)
+ pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+ else
+ pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+
+/* List of quirks for OHCI */
+static const struct pci_device_id ohci_pci_quirks[] = {
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
+ .driver_data = (unsigned long)ohci_quirk_amd756,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
+ .driver_data = (unsigned long)ohci_quirk_opti,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
+ .driver_data = (unsigned long)ohci_quirk_ns,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
+ .driver_data = (unsigned long)ohci_quirk_zfmicro,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
+ .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
+ .driver_data = (unsigned long)ohci_quirk_nec,
+ },
+ {
+ /* Toshiba portege 4000 */
+ .vendor = PCI_VENDOR_ID_AL,
+ .device = 0x5237,
+ .subvendor = PCI_VENDOR_ID_TOSHIBA,
+ .subdevice = 0x0004,
+ .driver_data = (unsigned long) broken_suspend,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
+ .driver_data = (unsigned long) broken_suspend,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
+ .driver_data = (unsigned long)ohci_quirk_amd700,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
+ .driver_data = (unsigned long)ohci_quirk_amd700,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
+ .driver_data = (unsigned long)ohci_quirk_amd700,
+ },
+
+ /* FIXME for some of the early AMD 760 southbridges, OHCI
+ * won't work at all. blacklist them.
+ */
+
+ {},
+};
+
+static int ohci_pci_reset (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret = 0;
+
+ if (hcd->self.controller) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ const struct pci_device_id *quirk_id;
+
+ quirk_id = pci_match_id(ohci_pci_quirks, pdev);
+ if (quirk_id != NULL) {
+ int (*quirk)(struct usb_hcd *ohci);
+ quirk = (void *)quirk_id->driver_data;
+ ret = quirk(hcd);
}
+ }
+ if (ret == 0) {
+ ohci_hcd_init (ohci);
+ return ohci_init (ohci);
+ }
+ return ret;
+}
+
- /* Check for Compaq's ZFMicro chipset, which needs short
- * delays before control or bulk queues get re-activated
- * in finish_unlinks()
+static int __devinit ohci_pci_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
+
+#ifdef CONFIG_PM /* avoid warnings about unused pdev */
+ if (hcd->self.controller) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /* RWC may not be set for add-in PCI cards, since boot
+ * firmware probably ignored them. This transfers PCI
+ * PM wakeup capabilities.
*/
- else if (pdev->vendor == PCI_VENDOR_ID_COMPAQ
- && pdev->device == 0xa0f8) {
- ohci->flags |= OHCI_QUIRK_ZFMICRO;
- ohci_dbg (ohci,
- "enabled Compaq ZFMicro chipset quirk\n");
- }
+ if (device_can_wakeup(&pdev->dev))
+ ohci->hc_control |= OHCI_CTRL_RWC;
}
+#endif /* CONFIG_PM */
- /* NOTE: there may have already been a first reset, to
- * keep bios/smm irqs from making trouble
- */
- if ((ret = ohci_run (ohci)) < 0) {
+ ret = ohci_run (ohci);
+ if (ret < 0) {
ohci_err (ohci, "can't start\n");
ohci_stop (hcd);
- return ret;
}
- return 0;
+ return ret;
}
#ifdef CONFIG_PM
-static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+static int ohci_pci_suspend(struct usb_hcd *hcd)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ unsigned long flags;
+ int rc = 0;
+
+ /* Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ *
+ * This is still racy as hcd->state is manipulated outside of
+ * any locks =P But that will be a different fix.
+ */
+ spin_lock_irqsave (&ohci->lock, flags);
+ if (hcd->state != HC_STATE_SUSPENDED) {
+ rc = -EINVAL;
+ goto bail;
+ }
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+ (void)ohci_readl(ohci, &ohci->regs->intrdisable);
- /* suspend root hub, hoping it keeps power during suspend */
- if (time_before (jiffies, ohci->next_statechange))
- msleep (100);
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ bail:
+ spin_unlock_irqrestore (&ohci->lock, flags);
-#ifdef CONFIG_USB_SUSPEND
- (void) usb_suspend_device (hcd->self.root_hub, message);
-#else
- usb_lock_device (hcd->self.root_hub);
- (void) ohci_hub_suspend (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- /* let things settle down a bit */
- msleep (100);
-
-#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
- struct device_node *of_node;
-
- /* Disable USB PAD & cell clock */
- of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0);
- }
-#endif /* CONFIG_PPC_PMAC */
- return 0;
+ return rc;
}
-static int ohci_pci_resume (struct usb_hcd *hcd)
+static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int retval = 0;
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-#ifdef CONFIG_PPC_PMAC
- if (_machine == _MACH_Pmac) {
- struct device_node *of_node;
+ /* Make sure resume from hibernation re-enumerates everything */
+ if (hibernated)
+ ohci_usb_reset(hcd_to_ohci(hcd));
- /* Re-enable USB PAD & cell clock */
- of_node = pci_device_to_OF_node (to_pci_dev(hcd->self.controller));
- if (of_node)
- pmac_call_feature (PMAC_FTR_USB_ENABLE, of_node, 0, 1);
- }
-#endif /* CONFIG_PPC_PMAC */
-
- /* resume root hub */
- if (time_before (jiffies, ohci->next_statechange))
- msleep (100);
-#ifdef CONFIG_USB_SUSPEND
- /* get extra cleanup even if remote wakeup isn't in use */
- retval = usb_resume_device (hcd->self.root_hub);
-#else
- usb_lock_device (hcd->self.root_hub);
- retval = ohci_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
-#endif
-
- return retval;
+ ohci_finish_controller_resume(hcd);
+ return 0;
}
#endif /* CONFIG_PM */
*/
.reset = ohci_pci_reset,
.start = ohci_pci_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
#ifdef CONFIG_PM
- .suspend = ohci_pci_suspend,
- .resume = ohci_pci_resume,
+ .pci_suspend = ohci_pci_suspend,
+ .pci_resume = ohci_pci_resume,
#endif
- .stop = ohci_stop,
/*
* managing i/o requests and associated device resources
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = ohci_hub_suspend,
- .hub_resume = ohci_hub_resume,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
static const struct pci_device_id pci_ids [] = { {
/* handle any USB OHCI controller */
- PCI_DEVICE_CLASS((PCI_CLASS_SERIAL_USB << 8) | 0x10, ~0),
+ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
.driver_data = (unsigned long) &ohci_pci_hc_driver,
}, { /* end: all zeroes */ }
};
.probe = usb_hcd_pci_probe,
.remove = usb_hcd_pci_remove,
+ .shutdown = usb_hcd_pci_shutdown,
-#ifdef CONFIG_PM
- .suspend = usb_hcd_pci_suspend,
- .resume = usb_hcd_pci_resume,
+#ifdef CONFIG_PM_SLEEP
+ .driver = {
+ .pm = &usb_hcd_pci_pm_ops
+ },
#endif
};
-
-
-static int __init ohci_hcd_pci_init (void)
-{
- printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
- if (usb_disabled())
- return -ENODEV;
-
- pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
- sizeof (struct ed), sizeof (struct td));
- return pci_register_driver (&ohci_pci_driver);
-}
-module_init (ohci_hcd_pci_init);
-
-/*-------------------------------------------------------------------------*/
-
-static void __exit ohci_hcd_pci_cleanup (void)
-{
- pci_unregister_driver (&ohci_pci_driver);
-}
-module_exit (ohci_hcd_pci_cleanup);