/*
* OHCI HCD (Host Controller Driver) for USB.
- *
+ *
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
+ *
* This file is licenced under GPL
*/
(temp & RH_PS_PSSC) ? " PSSC" : "", \
(temp & RH_PS_PESC) ? " PESC" : "", \
(temp & RH_PS_CSC) ? " CSC" : "", \
- \
+ \
(temp & RH_PS_LSDA) ? " LSDA" : "", \
(temp & RH_PS_PPS) ? " PPS" : "", \
(temp & RH_PS_PRS) ? " PRS" : "", \
(temp & RH_PS_POCI) ? " POCI" : "", \
(temp & RH_PS_PSS) ? " PSS" : "", \
- \
+ \
(temp & RH_PS_PES) ? " PES" : "", \
(temp & RH_PS_CCS) ? " CCS" : "" \
);
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_SUSPEND) || defined(CONFIG_PM)
-
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
-static void dl_done_list (struct ohci_hcd *, struct pt_regs *);
-static void finish_unlinks (struct ohci_hcd *, u16 , struct pt_regs *);
-static int ohci_restart (struct ohci_hcd *ohci);
+static void dl_done_list (struct ohci_hcd *);
+static void finish_unlinks (struct ohci_hcd *, u16);
-static int ohci_hub_suspend (struct usb_hcd *hcd)
+#ifdef CONFIG_PM
+static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
+__releases(ohci->lock)
+__acquires(ohci->lock)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int status = 0;
- unsigned long flags;
-
- spin_lock_irqsave (&ohci->lock, flags);
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
ohci_dbg (ohci, "needs reinit!\n");
goto done;
case OHCI_USB_SUSPEND:
- ohci_dbg (ohci, "already suspended\n");
- goto done;
+ if (!ohci->autostop) {
+ ohci_dbg (ohci, "already suspended\n");
+ goto done;
+ }
}
- ohci_dbg (ohci, "suspend root hub\n");
+ ohci_dbg (ohci, "%s root hub\n",
+ autostop ? "auto-stop" : "suspend");
/* First stop any processing */
- hcd->state = HC_STATE_QUIESCING;
- if (ohci->hc_control & OHCI_SCHED_ENABLES) {
- int limit;
-
+ if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
ohci->hc_control &= ~OHCI_SCHED_ENABLES;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
* then the last WDH could take 6+ msec
*/
ohci_dbg (ohci, "stopping schedules ...\n");
- limit = 2000;
- while (limit > 0) {
- udelay (250);
- limit =- 250;
- if (ohci_readl (ohci, &ohci->regs->intrstatus)
- & OHCI_INTR_SF)
- break;
- }
- dl_done_list (ohci, NULL);
- mdelay (7);
+ ohci->autostop = 0;
+ spin_unlock_irq (&ohci->lock);
+ msleep (8);
+ spin_lock_irq (&ohci->lock);
}
- dl_done_list (ohci, NULL);
- finish_unlinks (ohci, ohci_frame_no(ohci), NULL);
- ohci_writel (ohci, ohci_readl (ohci, &ohci->regs->intrstatus),
- &ohci->regs->intrstatus);
+ dl_done_list (ohci);
+ finish_unlinks (ohci, ohci_frame_no(ohci));
/* maybe resume can wake root hub */
- if (hcd->remote_wakeup)
+ if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
ohci->hc_control |= OHCI_CTRL_RWE;
- else
+ } else {
+ ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
+ &ohci->regs->intrdisable);
ohci->hc_control &= ~OHCI_CTRL_RWE;
+ }
- /* Suspend hub */
+ /* Suspend hub ... this is the "global (to this bus) suspend" mode,
+ * which doesn't imply ports will first be individually suspended.
+ */
ohci->hc_control &= ~OHCI_CTRL_HCFS;
ohci->hc_control |= OHCI_USB_SUSPEND;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
(void) ohci_readl (ohci, &ohci->regs->control);
/* no resumes until devices finish suspending */
- ohci->next_statechange = jiffies + msecs_to_jiffies (5);
+ if (!autostop) {
+ ohci->next_statechange = jiffies + msecs_to_jiffies (5);
+ ohci->autostop = 0;
+ }
done:
- if (status == 0)
- hcd->state = HC_STATE_SUSPENDED;
- spin_unlock_irqrestore (&ohci->lock, flags);
return status;
}
}
/* caller has locked the root hub */
-static int ohci_hub_resume (struct usb_hcd *hcd)
+static int ohci_rh_resume (struct ohci_hcd *ohci)
+__releases(ohci->lock)
+__acquires(ohci->lock)
{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ struct usb_hcd *hcd = ohci_to_hcd (ohci);
u32 temp, enables;
int status = -EINPROGRESS;
+ int autostopped = ohci->autostop;
- if (time_before (jiffies, ohci->next_statechange))
- msleep(5);
-
- spin_lock_irq (&ohci->lock);
+ ohci->autostop = 0;
ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
- /* this can happen after suspend-to-disk */
+ /* this can happen after resuming a swsusp snapshot */
if (hcd->state == HC_STATE_RESUMING) {
ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
ohci->hc_control);
ohci->hc_control |= OHCI_USB_RESUME;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
(void) ohci_readl (ohci, &ohci->regs->control);
- ohci_dbg (ohci, "resume root hub\n");
+ ohci_dbg (ohci, "%s root hub\n",
+ autostopped ? "auto-start" : "resume");
break;
case OHCI_USB_RESUME:
/* HCFS changes sometime after INTR_RD */
- ohci_info (ohci, "wakeup\n");
+ ohci_dbg(ohci, "%swakeup root hub\n",
+ autostopped ? "auto-" : "");
break;
case OHCI_USB_OPER:
- ohci_dbg (ohci, "already resumed\n");
- status = 0;
+ /* this can happen after resuming a swsusp snapshot */
+ ohci_dbg (ohci, "snapshot resume? reinit\n");
+ status = -EBUSY;
break;
default: /* RESET, we lost power */
- ohci_dbg (ohci, "root hub hardware reset\n");
+ ohci_dbg (ohci, "lost power\n");
status = -EBUSY;
}
- spin_unlock_irq (&ohci->lock);
if (status == -EBUSY) {
- (void) ohci_init (ohci);
- return ohci_restart (ohci);
+ if (!autostopped) {
+ spin_unlock_irq (&ohci->lock);
+ (void) ohci_init (ohci);
+ status = ohci_restart (ohci);
+
+ usb_root_hub_lost_power(hcd->self.root_hub);
+
+ spin_lock_irq (&ohci->lock);
+ }
+ return status;
}
if (status != -EINPROGRESS)
return status;
-
- temp = roothub_a (ohci) & RH_A_NDP;
- enables = 0;
- while (temp--) {
- u32 stat = ohci_readl (ohci,
- &ohci->regs->roothub.portstatus [temp]);
-
- /* force global, not selective, resume */
- if (!(stat & RH_PS_PSS))
- continue;
- ohci_writel (ohci, RH_PS_POCI,
- &ohci->regs->roothub.portstatus [temp]);
- }
+ if (autostopped)
+ goto skip_resume;
+ spin_unlock_irq (&ohci->lock);
/* Some controllers (lucent erratum) need extra-long delays */
- hcd->state = HC_STATE_RESUMING;
- mdelay (20 /* usb 11.5.1.10 */ + 15);
+ msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
temp = ohci_readl (ohci, &ohci->regs->control);
temp &= OHCI_CTRL_HCFS;
if (temp != OHCI_USB_RESUME) {
ohci_err (ohci, "controller won't resume\n");
+ spin_lock_irq(&ohci->lock);
return -EBUSY;
}
/* Sometimes PCI D3 suspend trashes frame timings ... */
periodic_reinit (ohci);
+ /* the following code is executed with ohci->lock held and
+ * irqs disabled if and only if autostopped is true
+ */
+
+skip_resume:
/* interrupts might have been disabled */
ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
if (ohci->ed_rm_list)
ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
- ohci_writel (ohci, ohci_readl (ohci, &ohci->regs->intrstatus),
- &ohci->regs->intrstatus);
/* Then re-enable operations */
ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
(void) ohci_readl (ohci, &ohci->regs->control);
- msleep (3);
+ if (!autostopped)
+ msleep (3);
- temp = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- if (hcd->can_wakeup)
- temp |= OHCI_CTRL_RWC;
+ temp = ohci->hc_control;
+ temp &= OHCI_CTRL_RWC;
+ temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
ohci->hc_control = temp;
ohci_writel (ohci, temp, &ohci->regs->control);
(void) ohci_readl (ohci, &ohci->regs->control);
/* TRSMRCY */
- msleep (10);
+ if (!autostopped) {
+ msleep (10);
+ spin_lock_irq (&ohci->lock);
+ }
+ /* now ohci->lock is always held and irqs are always disabled */
- /* keep it alive for ~5x suspend + resume costs */
- ohci->next_statechange = jiffies + msecs_to_jiffies (250);
+ /* keep it alive for more than ~5x suspend + resume costs */
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
/* maybe turn schedules back on */
enables = 0;
(void) ohci_readl (ohci, &ohci->regs->control);
}
- hcd->state = HC_STATE_RUNNING;
return 0;
}
-static void ohci_rh_resume (void *_hcd)
+static int ohci_bus_suspend (struct usb_hcd *hcd)
{
- struct usb_hcd *hcd = _hcd;
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int rc;
+
+ spin_lock_irq (&ohci->lock);
- usb_lock_device (hcd->self.root_hub);
- (void) ohci_hub_resume (hcd);
- usb_unlock_device (hcd->self.root_hub);
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ rc = -ESHUTDOWN;
+ else
+ rc = ohci_rh_suspend (ohci, 0);
+ spin_unlock_irq (&ohci->lock);
+ return rc;
}
-#else
+static int ohci_bus_resume (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int rc;
+
+ if (time_before (jiffies, ohci->next_statechange))
+ msleep(5);
+
+ spin_lock_irq (&ohci->lock);
-static void ohci_rh_resume (void *_hcd)
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ rc = -ESHUTDOWN;
+ else
+ rc = ohci_rh_resume (ohci);
+ spin_unlock_irq (&ohci->lock);
+
+ /* poll until we know a device is connected or we autostop */
+ if (rc == 0)
+ usb_hcd_poll_rh_status(hcd);
+ return rc;
+}
+
+/* Carry out the final steps of resuming the controller device */
+static void ohci_finish_controller_resume(struct usb_hcd *hcd)
{
- struct ohci_hcd *ohci = hcd_to_ohci (_hcd);
- ohci_dbg(ohci, "rh_resume ??\n");
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int port;
+ bool need_reinit = false;
+
+ /* See if the controller is already running or has been reset */
+ ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+ if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+ need_reinit = true;
+ } else {
+ switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ case OHCI_USB_RESET:
+ need_reinit = true;
+ }
+ }
+
+ /* If needed, reinitialize and suspend the root hub */
+ if (need_reinit) {
+ spin_lock_irq(&ohci->lock);
+ hcd->state = HC_STATE_RESUMING;
+ ohci_rh_resume(ohci);
+ hcd->state = HC_STATE_QUIESCING;
+ ohci_rh_suspend(ohci, 0);
+ hcd->state = HC_STATE_SUSPENDED;
+ spin_unlock_irq(&ohci->lock);
+ }
+
+ /* Normally just turn on port power and enable interrupts */
+ else {
+ ohci_dbg(ohci, "powerup ports\n");
+ for (port = 0; port < ohci->num_ports; port++)
+ ohci_writel(ohci, RH_PS_PPS,
+ &ohci->regs->roothub.portstatus[port]);
+
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
+ ohci_readl(ohci, &ohci->regs->intrenable);
+ msleep(20);
+ }
}
-#endif /* CONFIG_USB_SUSPEND || CONFIG_PM */
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+ int any_connected, int rhsc_status)
+{
+ int poll_rh = 1;
+ int rhsc_enable;
+
+ /* Some broken controllers never turn off RHCS in the interrupt
+ * status register. For their sake we won't re-enable RHSC
+ * interrupts if the interrupt bit is already active.
+ */
+ rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) &
+ OHCI_INTR_RHSC;
+
+ switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ /* If no status changes are pending, enable RHSC interrupts. */
+ if (!rhsc_enable && !rhsc_status && !changed) {
+ rhsc_enable = OHCI_INTR_RHSC;
+ ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
+ }
+
+ /* Keep on polling until we know a device is connected
+ * and RHSC is enabled, or until we autostop.
+ */
+ if (!ohci->autostop) {
+ if (any_connected ||
+ !device_may_wakeup(&ohci_to_hcd(ohci)
+ ->self.root_hub->dev)) {
+ if (rhsc_enable)
+ poll_rh = 0;
+ } else {
+ ohci->autostop = 1;
+ ohci->next_statechange = jiffies + HZ;
+ }
+
+ /* if no devices have been attached for one second, autostop */
+ } else {
+ if (changed || any_connected) {
+ ohci->autostop = 0;
+ ohci->next_statechange = jiffies +
+ STATECHANGE_DELAY;
+ } else if (time_after_eq(jiffies,
+ ohci->next_statechange)
+ && !ohci->ed_rm_list
+ && !(ohci->hc_control &
+ OHCI_SCHED_ENABLES)) {
+ ohci_rh_suspend(ohci, 1);
+ if (rhsc_enable)
+ poll_rh = 0;
+ }
+ }
+ break;
+
+ case OHCI_USB_SUSPEND:
+ case OHCI_USB_RESUME:
+ /* if there is a port change, autostart or ask to be resumed */
+ if (changed) {
+ if (ohci->autostop)
+ ohci_rh_resume(ohci);
+ else
+ usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
+
+ /* If remote wakeup is disabled, stop polling */
+ } else if (!ohci->autostop &&
+ !ohci_to_hcd(ohci)->self.root_hub->
+ do_remote_wakeup) {
+ poll_rh = 0;
+
+ } else {
+ /* If no status changes are pending,
+ * enable RHSC interrupts
+ */
+ if (!rhsc_enable && !rhsc_status) {
+ rhsc_enable = OHCI_INTR_RHSC;
+ ohci_writel(ohci, rhsc_enable,
+ &ohci->regs->intrenable);
+ }
+ /* Keep polling until RHSC is enabled */
+ if (rhsc_enable)
+ poll_rh = 0;
+ }
+ break;
+ }
+ return poll_rh;
+}
+
+#else /* CONFIG_PM */
+
+static inline int ohci_rh_resume(struct ohci_hcd *ohci)
+{
+ return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+ int any_connected, int rhsc_status)
+{
+ /* If RHSC is enabled, don't poll */
+ if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+ return 0;
+
+ /* If status changes are pending, continue polling.
+ * Conversely, if no status changes are pending but the RHSC
+ * status bit was set, then RHSC may be broken so continue polling.
+ */
+ if (changed || rhsc_status)
+ return 1;
+
+ /* It's safe to re-enable RHSC interrupts */
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
/*-------------------------------------------------------------------------*/
ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ports, i, changed = 0, length = 1;
- int can_suspend = hcd->can_wakeup;
+ int i, changed = 0, length = 1;
+ int any_connected = 0;
+ int rhsc_status;
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
-
- /* handle autosuspended root: finish resuming before
- * letting khubd or root hub timer see state changes.
- */
- if ((ohci->hc_control & OHCI_CTRL_HCFS) != OHCI_USB_OPER
- || !HC_IS_RUNNING(hcd->state)) {
- can_suspend = 0;
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
goto done;
- }
- ports = roothub_a (ohci) & RH_A_NDP;
- if (ports > MAX_ROOT_PORTS) {
- ohci_err (ohci, "bogus NDP=%d, rereads as NDP=%d\n", ports,
+ /* undocumented erratum seen on at least rev D */
+ if ((ohci->flags & OHCI_QUIRK_AMD756)
+ && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
+ ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
/* retry later; "should not happen" */
goto done;
buf [0] = changed = 1;
else
buf [0] = 0;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
buf [1] = 0;
length++;
}
+ /* Clear the RHSC status flag before reading the port statuses */
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrstatus);
+ rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
+ OHCI_INTR_RHSC;
+
/* look at each port */
- for (i = 0; i < ports; i++) {
+ for (i = 0; i < ohci->num_ports; i++) {
u32 status = roothub_portstatus (ohci, i);
+ /* can't autostop if ports are connected */
+ any_connected |= (status & RH_PS_CCS);
+
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
changed = 1;
buf [0] |= 1 << (i + 1);
else
buf [1] |= 1 << (i - 7);
- continue;
}
-
- /* can suspend if no ports are enabled; or if all all
- * enabled ports are suspended AND remote wakeup is on.
- */
- if (!(status & RH_PS_CCS))
- continue;
- if ((status & RH_PS_PSS) && hcd->remote_wakeup)
- continue;
- can_suspend = 0;
}
+
+ hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
+ any_connected, rhsc_status);
+
done:
spin_unlock_irqrestore (&ohci->lock, flags);
-#ifdef CONFIG_PM
- /* save power by suspending idle root hubs;
- * INTR_RD wakes us when there's work
- * NOTE: if we can do this, we don't need a root hub timer!
- */
- if (can_suspend
- && !changed
- && !ohci->ed_rm_list
- && ((OHCI_CTRL_HCFS | OHCI_SCHED_ENABLES)
- & ohci->hc_control)
- == OHCI_USB_OPER
- && time_after (jiffies, ohci->next_statechange)
- && usb_trylock_device (hcd->self.root_hub)
- ) {
- ohci_vdbg (ohci, "autosuspend\n");
- (void) ohci_hub_suspend (hcd);
- hcd->state = HC_STATE_RUNNING;
- usb_unlock_device (hcd->self.root_hub);
- }
-#endif
-
return changed ? length : 0;
}
struct usb_hub_descriptor *desc
) {
u32 rh = roothub_a (ohci);
- int ports = rh & RH_A_NDP;
u16 temp;
desc->bDescriptorType = 0x29;
desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
desc->bHubContrCurrent = 0;
- desc->bNbrPorts = ports;
- temp = 1 + (ports / 8);
+ desc->bNbrPorts = ohci->num_ports;
+ temp = 1 + (ohci->num_ports / 8);
desc->bDescLength = 7 + 2 * temp;
temp = 0;
if (rh & RH_A_NPS) /* no power switching? */
temp |= 0x0002;
- if (rh & RH_A_PSM) /* per-port power switching? */
+ if (rh & RH_A_PSM) /* per-port power switching? */
temp |= 0x0001;
if (rh & RH_A_NOCP) /* no overcurrent reporting? */
temp |= 0x0010;
rh = roothub_b (ohci);
memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
desc->bitmap [0] = rh & RH_B_DR;
- if (ports > 7) {
+ if (ohci->num_ports > 7) {
desc->bitmap [1] = (rh & RH_B_DR) >> 8;
desc->bitmap [2] = 0xff;
} else
return 0;
}
-static void start_hnp(struct ohci_hcd *ohci);
-
#else
#define ohci_start_port_reset NULL
#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
/* called from some task, normally khubd */
-static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port)
+static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
- u32 temp;
+ u32 temp = 0;
u16 now = ohci_readl(ohci, &ohci->regs->fmnumber);
u16 reset_done = now + PORT_RESET_MSEC;
+ int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
/* build a "continuous enough" reset signal, with up to
* 3msec gap between pulses. scheduler HZ==100 must work;
* this might need to be deadline-scheduled.
*/
do {
+ int limit_2;
+
/* spin until any current reset finishes */
- for (;;) {
+ limit_2 = PORT_RESET_HW_MSEC * 2;
+ while (--limit_2 >= 0) {
temp = ohci_readl (ohci, portstat);
+ /* handle e.g. CardBus eject */
+ if (temp == ~(u32)0)
+ return -ESHUTDOWN;
if (!(temp & RH_PS_PRS))
break;
udelay (500);
- }
+ }
+
+ /* timeout (a hardware error) has been observed when
+ * EHCI sets CF while this driver is resetting a port;
+ * presumably other disconnect paths might do it too.
+ */
+ if (limit_2 < 0) {
+ ohci_dbg(ohci,
+ "port[%d] reset timeout, stat %08x\n",
+ port, temp);
+ break;
+ }
if (!(temp & RH_PS_CCS))
break;
ohci_writel (ohci, RH_PS_PRS, portstat);
msleep(PORT_RESET_HW_MSEC);
now = ohci_readl(ohci, &ohci->regs->fmnumber);
- } while (tick_before(now, reset_done));
- /* caller synchronizes using PRSC */
+ } while (tick_before(now, reset_done) && --limit_1 >= 0);
+
+ /* caller synchronizes using PRSC ... and handles PRS
+ * still being set when this returns.
+ */
+
+ return 0;
}
static int ohci_hub_control (
u16 wLength
) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ports = hcd_to_bus (hcd)->root_hub->maxchild;
+ int ports = ohci->num_ports;
u32 temp;
int retval = 0;
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ return -ESHUTDOWN;
+
switch (typeReq) {
case ClearHubFeature:
switch (wValue) {
break;
case USB_PORT_FEAT_SUSPEND:
temp = RH_PS_POCI;
- if ((ohci->hc_control & OHCI_CTRL_HCFS)
- != OHCI_USB_OPER)
- schedule_work (&ohci->rh_resume);
break;
case USB_PORT_FEAT_C_SUSPEND:
temp = RH_PS_PSSC;
break;
case GetHubStatus:
temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
- *(__le32 *) buf = cpu_to_le32 (temp);
+ put_unaligned_le32(temp, buf);
break;
case GetPortStatus:
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
temp = roothub_portstatus (ohci, wIndex);
- *(__le32 *) buf = cpu_to_le32 (temp);
+ put_unaligned_le32(temp, buf);
#ifndef OHCI_VERBOSE_DEBUG
if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
#ifdef CONFIG_USB_OTG
if (hcd->self.otg_port == (wIndex + 1)
&& hcd->self.b_hnp_enable)
- start_hnp(ohci);
+ ohci->start_hnp(ohci);
else
#endif
ohci_writel (ohci, RH_PS_PSS,
&ohci->regs->roothub.portstatus [wIndex]);
break;
case USB_PORT_FEAT_RESET:
- root_port_reset (ohci, wIndex);
+ retval = root_port_reset (ohci, wIndex);
break;
default:
goto error;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff