* - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
*/
-#undef DEBUG
// #define VERBOSE /* extra debug messages (success too) */
// #define USB_TRACE /* packet-level success messages */
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
-#include <linux/usb_ch9.h>
-#include <linux/usb_gadget.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
#include <asm/byteorder.h>
#include <asm/io.h>
/* enabling the no-toggle interrupt mode would need an api hook */
mode = 0;
- max = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
+ max = get_unaligned_le16(&desc->wMaxPacketSize);
switch (max) {
case 64: mode++;
case 32: mode++;
/*-------------------------------------------------------------------------*/
-#undef USE_KMALLOC
-
-/* many common platforms have dma-coherent caches, which means that it's
- * safe to use kmalloc() memory for all i/o buffers without using any
- * cache flushing calls. (unless you're trying to share cache lines
- * between dma and non-dma activities, which is a slow idea in any case.)
- *
- * other platforms need more care, with 2.6 having a moderately general
- * solution except for the common "buffer is smaller than a page" case.
- */
-#if defined(CONFIG_X86)
-#define USE_KMALLOC
-
-#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT)
-#define USE_KMALLOC
-
-#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
-#define USE_KMALLOC
-
-#endif
-
-/* allocating buffers this way eliminates dma mapping overhead, which
- * on some platforms will mean eliminating a per-io buffer copy. with
- * some kinds of system caches, further tweaks may still be needed.
- */
-static void *
-goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
- dma_addr_t *dma, gfp_t gfp_flags)
-{
- void *retval;
- struct goku_ep *ep;
-
- ep = container_of(_ep, struct goku_ep, ep);
- if (!_ep)
- return NULL;
- *dma = DMA_ADDR_INVALID;
-
-#if defined(USE_KMALLOC)
- retval = kmalloc(bytes, gfp_flags);
- if (retval)
- *dma = virt_to_phys(retval);
-#else
- if (ep->dma) {
- /* the main problem with this call is that it wastes memory
- * on typical 1/N page allocations: it allocates 1-N pages.
- */
-#warning Using dma_alloc_coherent even with buffers smaller than a page.
- retval = dma_alloc_coherent(&ep->dev->pdev->dev,
- bytes, dma, gfp_flags);
- } else
- retval = kmalloc(bytes, gfp_flags);
-#endif
- return retval;
-}
-
-static void
-goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
-{
- /* free memory into the right allocator */
-#ifndef USE_KMALLOC
- if (dma != DMA_ADDR_INVALID) {
- struct goku_ep *ep;
-
- ep = container_of(_ep, struct goku_ep, ep);
- if (!_ep)
- return;
- dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
- } else
-#endif
- kfree (buf);
-}
-
-/*-------------------------------------------------------------------------*/
-
static void
done(struct goku_ep *ep, struct goku_request *req, int status)
{
/* use ep1/ep2 double-buffering for OUT */
if (!(size & PACKET_ACTIVE))
size = readl(®s->EPxSizeLB[ep->num]);
- if (!(size & PACKET_ACTIVE)) // "can't happen"
+ if (!(size & PACKET_ACTIVE)) /* "can't happen" */
break;
size &= DATASIZE; /* EPxSizeH == 0 */
req->req.actual = (curr - req->req.dma) + 1;
req->req.status = status;
- VDBG(ep->dev, "%s %s %s %d/%d\n", __FUNCTION__, ep->ep.name,
+ VDBG(ep->dev, "%s %s %s %d/%d\n", __func__, ep->ep.name,
ep->is_in ? "IN" : "OUT",
req->req.actual, req->req.length);
if (dev->ep0state == EP0_SUSPEND)
return -EBUSY;
- VDBG(dev, "%s %s %s %s %p\n", __FUNCTION__, _ep->name,
+ VDBG(dev, "%s %s %s %s %p\n", __func__, _ep->name,
ep->is_in ? "IN" : "OUT",
ep->dma ? "dma" : "pio",
_req);
/* don't change EPxSTATUS_EP_INVALID to READY */
} else if (!ep->desc) {
- DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
+ DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
return -EINVAL;
}
regs = ep->dev->regs;
size = readl(®s->EPxSizeLA[ep->num]) & DATASIZE;
size += readl(®s->EPxSizeLB[ep->num]) & DATASIZE;
- VDBG(ep->dev, "%s %s %u\n", __FUNCTION__, ep->ep.name, size);
+ VDBG(ep->dev, "%s %s %u\n", __func__, ep->ep.name, size);
return size;
}
if (!_ep)
return;
ep = container_of(_ep, struct goku_ep, ep);
- VDBG(ep->dev, "%s %s\n", __FUNCTION__, ep->ep.name);
+ VDBG(ep->dev, "%s %s\n", __func__, ep->ep.name);
/* don't change EPxSTATUS_EP_INVALID to READY */
if (!ep->desc && ep->num != 0) {
- DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
+ DBG(ep->dev, "%s %s inactive?\n", __func__, ep->ep.name);
return;
}
.alloc_request = goku_alloc_request,
.free_request = goku_free_request,
- .alloc_buffer = goku_alloc_buffer,
- .free_buffer = goku_free_buffer,
-
.queue = goku_queue,
.dequeue = goku_dequeue,
is_usb_connected
? ((tmp & PW_PULLUP) ? "full speed" : "powered")
: "disconnected",
- ({char *tmp;
+ ({char *state;
switch(dev->ep0state){
- case EP0_DISCONNECT: tmp = "ep0_disconnect"; break;
- case EP0_IDLE: tmp = "ep0_idle"; break;
- case EP0_IN: tmp = "ep0_in"; break;
- case EP0_OUT: tmp = "ep0_out"; break;
- case EP0_STATUS: tmp = "ep0_status"; break;
- case EP0_STALL: tmp = "ep0_stall"; break;
- case EP0_SUSPEND: tmp = "ep0_suspend"; break;
- default: tmp = "ep0_?"; break;
- } tmp; })
+ case EP0_DISCONNECT: state = "ep0_disconnect"; break;
+ case EP0_IDLE: state = "ep0_idle"; break;
+ case EP0_IN: state = "ep0_in"; break;
+ case EP0_OUT: state = "ep0_out"; break;
+ case EP0_STATUS: state = "ep0_status"; break;
+ case EP0_STALL: state = "ep0_stall"; break;
+ case EP0_SUSPEND: state = "ep0_suspend"; break;
+ default: state = "ep0_?"; break;
+ } state; })
);
size -= t;
next += t;
for (i = 0; i < 4; i++) {
struct goku_ep *ep = &dev->ep [i];
struct goku_request *req;
- int t;
if (i && !ep->desc)
continue;
static void udc_reinit (struct goku_udc *dev)
{
static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" };
-
+
unsigned i;
INIT_LIST_HEAD (&dev->gadget.ep_list);
struct goku_udc_regs __iomem *regs = dev->regs;
unsigned i;
- VDBG(dev, "%s\n", __FUNCTION__);
+ VDBG(dev, "%s\n", __func__);
udc_reset(dev);
udc_reinit (dev);
if (readl(&dev->regs->power_detect) & PW_DETECT)
ep0_start(dev);
else {
- DBG(dev, "%s\n", __FUNCTION__);
+ DBG(dev, "%s\n", __func__);
dev->int_enable = INT_PWRDETECT;
writel(dev->int_enable, &dev->regs->int_enable);
}
if (!driver
|| driver->speed != USB_SPEED_FULL
|| !driver->bind
- || !driver->unbind
|| !driver->disconnect
|| !driver->setup)
return -EINVAL;
{
unsigned i;
- DBG (dev, "%s\n", __FUNCTION__);
+ DBG (dev, "%s\n", __func__);
if (dev->gadget.speed == USB_SPEED_UNKNOWN)
driver = NULL;
if (!dev)
return -ENODEV;
- if (!driver || driver != dev->driver)
+ if (!driver || driver != dev->driver || !driver->unbind)
return -EINVAL;
spin_lock_irqsave(&dev->lock, flags);
spin_unlock_irqrestore(&dev->lock, flags);
driver->unbind(&dev->gadget);
+ dev->gadget.dev.driver = NULL;
DBG(dev, "unregistered driver '%s'\n", driver->driver.name);
return 0;
handled = 1; \
}
-static irqreturn_t goku_irq(int irq, void *_dev, struct pt_regs *r)
+static irqreturn_t goku_irq(int irq, void *_dev)
{
struct goku_udc *dev = _dev;
struct goku_udc_regs __iomem *regs = dev->regs;
{
struct goku_udc *dev = pci_get_drvdata(pdev);
- DBG(dev, "%s\n", __FUNCTION__);
- /* start with the driver above us */
- if (dev->driver) {
- /* should have been done already by driver model core */
- WARN(dev, "pci remove, driver '%s' is still registered\n",
- dev->driver->driver.name);
- usb_gadget_unregister_driver(dev->driver);
- }
+ DBG(dev, "%s\n", __func__);
+
+ BUG_ON(dev->driver);
#ifdef CONFIG_USB_GADGET_DEBUG_FILES
remove_proc_entry(proc_node_name, NULL);
* usb_gadget_driver_{register,unregister}() must change.
*/
if (the_controller) {
- WARN(dev, "ignoring %s\n", pci_name(pdev));
+ WARNING(dev, "ignoring %s\n", pci_name(pdev));
return -EBUSY;
}
if (!pdev->irq) {
}
/* alloc, and start init */
- dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ dev = kzalloc (sizeof *dev, GFP_KERNEL);
if (dev == NULL){
pr_debug("enomem %s\n", pci_name(pdev));
retval = -ENOMEM;
goto done;
}
- memset(dev, 0, sizeof *dev);
spin_lock_init(&dev->lock);
dev->pdev = pdev;
dev->gadget.ops = &goku_ops;
/* the "gadget" abstracts/virtualizes the controller */
- strcpy(dev->gadget.dev.bus_id, "gadget");
+ dev_set_name(&dev->gadget.dev, "gadget");
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
dev->gadget.dev.release = gadget_release;
/* init to known state, then setup irqs */
udc_reset(dev);
udc_reinit (dev);
- if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
+ if (request_irq(pdev->irq, goku_irq, IRQF_SHARED/*|IRQF_SAMPLE_RANDOM*/,
driver_name, dev) != 0) {
DBG(dev, "request interrupt %d failed\n", pdev->irq);
retval = -EBUSY;
/* done */
the_controller = dev;
- device_register(&dev->gadget.dev);
-
- return 0;
+ retval = device_register(&dev->gadget.dev);
+ if (retval == 0)
+ return 0;
done:
if (dev)
/*-------------------------------------------------------------------------*/
static struct pci_device_id pci_ids [] = { {
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
.vendor = 0x102f, /* Toshiba */
.device = 0x0107, /* this UDC */
.subvendor = PCI_ANY_ID,
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff