/*
- * drivers/usb/usb.c
+ * drivers/usb/core/usb.c
*
* (C) Copyright Linus Torvalds 1999
* (C) Copyright Johannes Erdfelt 1999-2001
* are evil.
*/
-#include <linux/config.h>
#include <linux/module.h>
+#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
-#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <linux/mutex.h>
+#include <linux/workqueue.h>
#include <asm/io.h>
#include <asm/scatterlist.h>
static int nousb; /* Disable USB when built into kernel image */
+/* Workqueue for autosuspend and for remote wakeup of root hubs */
+struct workqueue_struct *ksuspend_usb_wq;
+
+#ifdef CONFIG_USB_SUSPEND
+static int usb_autosuspend_delay = 2; /* Default delay value,
+ * in seconds */
+module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
+MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
+
+#else
+#define usb_autosuspend_delay 0
+#endif
+
/**
* usb_ifnum_to_if - get the interface object with a given interface number
* Don't call this function unless you are bound to one of the interfaces
* on this device or you have locked the device!
*/
-struct usb_interface *usb_ifnum_to_if(struct usb_device *dev, unsigned ifnum)
+struct usb_interface *usb_ifnum_to_if(const struct usb_device *dev,
+ unsigned ifnum)
{
struct usb_host_config *config = dev->actconfig;
int i;
* Don't call this function unless you are bound to the intf interface
* or you have locked the device!
*/
-struct usb_host_interface *usb_altnum_to_altsetting(struct usb_interface *intf,
- unsigned int altnum)
+struct usb_host_interface *usb_altnum_to_altsetting(const struct usb_interface *intf,
+ unsigned int altnum)
{
int i;
return NULL;
}
-/**
- * usb_driver_claim_interface - bind a driver to an interface
- * @driver: the driver to be bound
- * @iface: the interface to which it will be bound; must be in the
- * usb device's active configuration
- * @priv: driver data associated with that interface
- *
- * This is used by usb device drivers that need to claim more than one
- * interface on a device when probing (audio and acm are current examples).
- * No device driver should directly modify internal usb_interface or
- * usb_device structure members.
- *
- * Few drivers should need to use this routine, since the most natural
- * way to bind to an interface is to return the private data from
- * the driver's probe() method.
- *
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver probe() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
- */
-int usb_driver_claim_interface(struct usb_driver *driver,
- struct usb_interface *iface, void* priv)
-{
- struct device *dev = &iface->dev;
-
- if (dev->driver)
- return -EBUSY;
-
- dev->driver = &driver->driver;
- usb_set_intfdata(iface, priv);
- iface->condition = USB_INTERFACE_BOUND;
- mark_active(iface);
-
- /* if interface was already added, bind now; else let
- * the future device_add() bind it, bypassing probe()
- */
- if (device_is_registered(dev))
- device_bind_driver(dev);
-
- return 0;
-}
-
-/**
- * usb_driver_release_interface - unbind a driver from an interface
- * @driver: the driver to be unbound
- * @iface: the interface from which it will be unbound
- *
- * This can be used by drivers to release an interface without waiting
- * for their disconnect() methods to be called. In typical cases this
- * also causes the driver disconnect() method to be called.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver disconnect() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
- */
-void usb_driver_release_interface(struct usb_driver *driver,
- struct usb_interface *iface)
-{
- struct device *dev = &iface->dev;
-
- /* this should never happen, don't release something that's not ours */
- if (!dev->driver || dev->driver != &driver->driver)
- return;
-
- /* don't release from within disconnect() */
- if (iface->condition != USB_INTERFACE_BOUND)
- return;
-
- /* don't release if the interface hasn't been added yet */
- if (device_is_registered(dev)) {
- iface->condition = USB_INTERFACE_UNBINDING;
- device_release_driver(dev);
- }
-
- dev->driver = NULL;
- usb_set_intfdata(iface, NULL);
- iface->condition = USB_INTERFACE_UNBOUND;
- mark_quiesced(iface);
-}
-
struct find_interface_arg {
int minor;
struct usb_interface *interface;
struct usb_interface *intf;
/* can't look at usb devices, only interfaces */
- if (dev->driver == &usb_generic_driver)
+ if (is_usb_device(dev))
return 0;
intf = to_usb_interface(dev);
struct usb_interface *usb_find_interface(struct usb_driver *drv, int minor)
{
struct find_interface_arg argb;
+ int retval;
argb.minor = minor;
argb.interface = NULL;
- driver_for_each_device(&drv->driver, NULL, &argb, __find_interface);
+ /* eat the error, it will be in argb.interface */
+ retval = driver_for_each_device(&drv->drvwrap.driver, NULL, &argb,
+ __find_interface);
return argb.interface;
}
-#ifdef CONFIG_HOTPLUG
-
-/*
- * This sends an uevent to userspace, typically helping to load driver
- * or other modules, configure the device, and more. Drivers can provide
- * a MODULE_DEVICE_TABLE to help with module loading subtasks.
- *
- * We're called either from khubd (the typical case) or from root hub
- * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle
- * delays in event delivery. Use sysfs (and DEVPATH) to make sure the
- * device (and this configuration!) are still present.
- */
-static int usb_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
-{
- struct usb_interface *intf;
- struct usb_device *usb_dev;
- struct usb_host_interface *alt;
- int i = 0;
- int length = 0;
-
- if (!dev)
- return -ENODEV;
-
- /* driver is often null here; dev_dbg() would oops */
- pr_debug ("usb %s: uevent\n", dev->bus_id);
-
- /* Must check driver_data here, as on remove driver is always NULL */
- if ((dev->driver == &usb_generic_driver) ||
- (dev->driver_data == &usb_generic_driver_data))
- return 0;
-
- intf = to_usb_interface(dev);
- usb_dev = interface_to_usbdev (intf);
- alt = intf->cur_altsetting;
-
- if (usb_dev->devnum < 0) {
- pr_debug ("usb %s: already deleted?\n", dev->bus_id);
- return -ENODEV;
- }
- if (!usb_dev->bus) {
- pr_debug ("usb %s: bus removed?\n", dev->bus_id);
- return -ENODEV;
- }
-
-#ifdef CONFIG_USB_DEVICEFS
- /* If this is available, userspace programs can directly read
- * all the device descriptors we don't tell them about. Or
- * even act as usermode drivers.
- *
- * FIXME reduce hardwired intelligence here
- */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "DEVICE=/proc/bus/usb/%03d/%03d",
- usb_dev->bus->busnum, usb_dev->devnum))
- return -ENOMEM;
-#endif
-
- /* per-device configurations are common */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "PRODUCT=%x/%x/%x",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice)))
- return -ENOMEM;
-
- /* class-based driver binding models */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "TYPE=%d/%d/%d",
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol))
- return -ENOMEM;
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- envp[i] = NULL;
-
- return 0;
-}
-
-#else
-
-static int usb_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
-{
- return -ENODEV;
-}
-
-#endif /* CONFIG_HOTPLUG */
-
/**
* usb_release_dev - free a usb device structure when all users of it are finished.
* @dev: device that's been disconnected
udev = to_usb_device(dev);
usb_destroy_configuration(udev);
- usb_bus_put(udev->bus);
+ usb_put_hcd(bus_to_hcd(udev->bus));
kfree(udev->product);
kfree(udev->manufacturer);
kfree(udev->serial);
kfree(udev);
}
+struct device_type usb_device_type = {
+ .name = "usb_device",
+ .release = usb_release_dev,
+};
+
+#ifdef CONFIG_PM
+
+static int ksuspend_usb_init(void)
+{
+ /* This workqueue is supposed to be both freezable and
+ * singlethreaded. Its job doesn't justify running on more
+ * than one CPU.
+ */
+ ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd");
+ if (!ksuspend_usb_wq)
+ return -ENOMEM;
+ return 0;
+}
+
+static void ksuspend_usb_cleanup(void)
+{
+ destroy_workqueue(ksuspend_usb_wq);
+}
+
+#else
+
+#define ksuspend_usb_init() 0
+#define ksuspend_usb_cleanup() do {} while (0)
+
+#endif /* CONFIG_PM */
+
/**
* usb_alloc_dev - usb device constructor (usbcore-internal)
* @parent: hub to which device is connected; null to allocate a root hub
* @bus: bus used to access the device
* @port1: one-based index of port; ignored for root hubs
- * Context: !in_interrupt ()
+ * Context: !in_interrupt()
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
if (!dev)
return NULL;
- bus = usb_bus_get(bus);
- if (!bus) {
+ if (!usb_get_hcd(bus_to_hcd(bus))) {
kfree(dev);
return NULL;
}
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
+ dev->dev.type = &usb_device_type;
dev->dev.dma_mask = bus->controller->dma_mask;
- dev->dev.driver_data = &usb_generic_driver_data;
- dev->dev.driver = &usb_generic_driver;
- dev->dev.release = usb_release_dev;
+ set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
INIT_LIST_HEAD(&dev->ep0.urb_list);
* as stable: bus->busnum changes easily from modprobe order,
* cardbus or pci hotplugging, and so on.
*/
- if (unlikely (!parent)) {
- dev->devpath [0] = '0';
+ if (unlikely(!parent)) {
+ dev->devpath[0] = '0';
dev->dev.parent = bus->controller;
- sprintf (&dev->dev.bus_id[0], "usb%d", bus->busnum);
+ sprintf(&dev->dev.bus_id[0], "usb%d", bus->busnum);
} else {
/* match any labeling on the hubs; it's one-based */
- if (parent->devpath [0] == '0')
- snprintf (dev->devpath, sizeof dev->devpath,
+ if (parent->devpath[0] == '0')
+ snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
else
- snprintf (dev->devpath, sizeof dev->devpath,
+ snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
dev->dev.parent = &parent->dev;
- sprintf (&dev->dev.bus_id[0], "%d-%s",
+ sprintf(&dev->dev.bus_id[0], "%d-%s",
bus->busnum, dev->devpath);
/* hub driver sets up TT records */
dev->parent = parent;
INIT_LIST_HEAD(&dev->filelist);
+#ifdef CONFIG_PM
+ mutex_init(&dev->pm_mutex);
+ INIT_DELAYED_WORK(&dev->autosuspend, usb_autosuspend_work);
+ dev->autosuspend_delay = usb_autosuspend_delay * HZ;
+#endif
return dev;
}
* case the driver already owns the device lock.)
*/
int usb_lock_device_for_reset(struct usb_device *udev,
- struct usb_interface *iface)
+ const struct usb_interface *iface)
{
unsigned long jiffies_expire = jiffies + HZ;
/* see if this device matches */
if ((vendor_id == le16_to_cpu(dev->descriptor.idVendor)) &&
(product_id == le16_to_cpu(dev->descriptor.idProduct))) {
- dev_dbg (&dev->dev, "matched this device!\n");
+ dev_dbg(&dev->dev, "matched this device!\n");
ret_dev = usb_get_dev(dev);
goto exit;
}
*/
int usb_get_current_frame_number(struct usb_device *dev)
{
- return dev->bus->op->get_frame_number (dev);
+ return usb_hcd_get_frame_number(dev);
}
/*-------------------------------------------------------------------*/
* address (through the pointer provided).
*
* These buffers are used with URB_NO_xxx_DMA_MAP set in urb->transfer_flags
- * to avoid behaviors like using "DMA bounce buffers", or tying down I/O
- * mapping hardware for long idle periods. The implementation varies between
+ * to avoid behaviors like using "DMA bounce buffers", or thrashing IOMMU
+ * hardware during URB completion/resubmit. The implementation varies between
* platforms, depending on details of how DMA will work to this device.
- * Using these buffers also helps prevent cacheline sharing problems on
- * architectures where CPU caches are not DMA-coherent.
+ * Using these buffers also eliminates cacheline sharing problems on
+ * architectures where CPU caches are not DMA-coherent. On systems without
+ * bus-snooping caches, these buffers are uncached.
*
* When the buffer is no longer used, free it with usb_buffer_free().
*/
-void *usb_buffer_alloc (
+void *usb_buffer_alloc(
struct usb_device *dev,
size_t size,
gfp_t mem_flags,
dma_addr_t *dma
)
{
- if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_alloc)
+ if (!dev || !dev->bus)
return NULL;
- return dev->bus->op->buffer_alloc (dev->bus, size, mem_flags, dma);
+ return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
}
/**
*
* This reclaims an I/O buffer, letting it be reused. The memory must have
* been allocated using usb_buffer_alloc(), and the parameters must match
- * those provided in that allocation request.
+ * those provided in that allocation request.
*/
-void usb_buffer_free (
+void usb_buffer_free(
struct usb_device *dev,
size_t size,
void *addr,
dma_addr_t dma
)
{
- if (!dev || !dev->bus || !dev->bus->op || !dev->bus->op->buffer_free)
- return;
- dev->bus->op->buffer_free (dev->bus, size, addr, dma);
+ if (!dev || !dev->bus)
+ return;
+ if (!addr)
+ return;
+ hcd_buffer_free(dev->bus, size, addr, dma);
}
/**
* Reverse the effect of this call with usb_buffer_unmap().
*/
#if 0
-struct urb *usb_buffer_map (struct urb *urb)
+struct urb *usb_buffer_map(struct urb *urb)
{
struct usb_bus *bus;
struct device *controller;
return NULL;
if (controller->dma_mask) {
- urb->transfer_dma = dma_map_single (controller,
+ urb->transfer_dma = dma_map_single(controller,
urb->transfer_buffer, urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (usb_pipecontrol (urb->pipe))
- urb->setup_dma = dma_map_single (controller,
+ if (usb_pipecontrol(urb->pipe))
+ urb->setup_dma = dma_map_single(controller,
urb->setup_packet,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
// FIXME generic api broken like pci, can't report errors
// if (urb->transfer_dma == DMA_ADDR_INVALID) return 0;
* usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s)
* @urb: urb whose transfer_buffer/setup_packet will be synchronized
*/
-void usb_buffer_dmasync (struct urb *urb)
+void usb_buffer_dmasync(struct urb *urb)
{
struct usb_bus *bus;
struct device *controller;
return;
if (controller->dma_mask) {
- dma_sync_single (controller,
+ dma_sync_single(controller,
urb->transfer_dma, urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (usb_pipecontrol (urb->pipe))
- dma_sync_single (controller,
+ if (usb_pipecontrol(urb->pipe))
+ dma_sync_single(controller,
urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
}
}
* Reverses the effect of usb_buffer_map().
*/
#if 0
-void usb_buffer_unmap (struct urb *urb)
+void usb_buffer_unmap(struct urb *urb)
{
struct usb_bus *bus;
struct device *controller;
return;
if (controller->dma_mask) {
- dma_unmap_single (controller,
+ dma_unmap_single(controller,
urb->transfer_dma, urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (usb_pipecontrol (urb->pipe))
- dma_unmap_single (controller,
+ if (usb_pipecontrol(urb->pipe))
+ dma_unmap_single(controller,
urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
}
urb->transfer_flags &= ~(URB_NO_TRANSFER_DMA_MAP
*
* Reverse the effect of this call with usb_buffer_unmap_sg().
*/
-int usb_buffer_map_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int nents)
+int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int nents)
{
struct usb_bus *bus;
struct device *controller;
if (!dev
- || usb_pipecontrol (pipe)
+ || usb_pipecontrol(pipe)
|| !(bus = dev->bus)
|| !(controller = bus->controller)
|| !controller->dma_mask)
return -1;
// FIXME generic api broken like pci, can't report errors
- return dma_map_sg (controller, sg, nents,
- usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ return dma_map_sg(controller, sg, nents,
+ usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
/* XXX DISABLED, no users currently. If you wish to re-enable this
* Use this when you are re-using a scatterlist's data buffers for
* another USB request.
*/
-void usb_buffer_dmasync_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents)
+void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
struct device *controller;
|| !controller->dma_mask)
return;
- dma_sync_sg (controller, sg, n_hw_ents,
- usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ dma_sync_sg(controller, sg, n_hw_ents,
+ usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
#endif
*
* Reverses the effect of usb_buffer_map_sg().
*/
-void usb_buffer_unmap_sg (struct usb_device *dev, unsigned pipe,
- struct scatterlist *sg, int n_hw_ents)
+void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+ struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
struct device *controller;
|| !controller->dma_mask)
return;
- dma_unmap_sg (controller, sg, n_hw_ents,
- usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
-}
-
-static int verify_suspended(struct device *dev, void *unused)
-{
- return (dev->power.power_state.event == PM_EVENT_ON) ? -EBUSY : 0;
-}
-
-static int usb_generic_suspend(struct device *dev, pm_message_t message)
-{
- struct usb_interface *intf;
- struct usb_driver *driver;
- int status;
-
- /* USB devices enter SUSPEND state through their hubs, but can be
- * marked for FREEZE as soon as their children are already idled.
- * But those semantics are useless, so we equate the two (sigh).
- */
- if (dev->driver == &usb_generic_driver) {
- if (dev->power.power_state.event == message.event)
- return 0;
- /* we need to rule out bogus requests through sysfs */
- status = device_for_each_child(dev, NULL, verify_suspended);
- if (status)
- return status;
- return usb_suspend_device (to_usb_device(dev));
- }
-
- if ((dev->driver == NULL) ||
- (dev->driver_data == &usb_generic_driver_data))
- return 0;
-
- intf = to_usb_interface(dev);
- driver = to_usb_driver(dev->driver);
-
- /* with no hardware, USB interfaces only use FREEZE and ON states */
- if (!is_active(intf))
- return 0;
-
- if (driver->suspend && driver->resume) {
- status = driver->suspend(intf, message);
- if (status)
- dev_err(dev, "%s error %d\n", "suspend", status);
- else
- mark_quiesced(intf);
- } else {
- // FIXME else if there's no suspend method, disconnect...
- dev_warn(dev, "no suspend for driver %s?\n", driver->name);
- mark_quiesced(intf);
- status = 0;
- }
- return status;
-}
-
-static int usb_generic_resume(struct device *dev)
-{
- struct usb_interface *intf;
- struct usb_driver *driver;
- struct usb_device *udev;
- int status;
-
- if (dev->power.power_state.event == PM_EVENT_ON)
- return 0;
-
- /* mark things as "on" immediately, no matter what errors crop up */
- dev->power.power_state.event = PM_EVENT_ON;
-
- /* devices resume through their hubs */
- if (dev->driver == &usb_generic_driver) {
- udev = to_usb_device(dev);
- if (udev->state == USB_STATE_NOTATTACHED)
- return 0;
- return usb_resume_device (to_usb_device(dev));
- }
-
- if ((dev->driver == NULL) ||
- (dev->driver_data == &usb_generic_driver_data)) {
- dev->power.power_state.event = PM_EVENT_FREEZE;
- return 0;
- }
-
- intf = to_usb_interface(dev);
- driver = to_usb_driver(dev->driver);
-
- udev = interface_to_usbdev(intf);
- if (udev->state == USB_STATE_NOTATTACHED)
- return 0;
-
- /* if driver was suspended, it has a resume method;
- * however, sysfs can wrongly mark things as suspended
- * (on the "no suspend method" FIXME path above)
- */
- if (driver->resume) {
- status = driver->resume(intf);
- if (status) {
- dev_err(dev, "%s error %d\n", "resume", status);
- mark_quiesced(intf);
- }
- } else
- dev_warn(dev, "no resume for driver %s?\n", driver->name);
- return 0;
+ dma_unmap_sg(controller, sg, n_hw_ents,
+ usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
-struct bus_type usb_bus_type = {
- .name = "usb",
- .match = usb_device_match,
- .uevent = usb_uevent,
- .suspend = usb_generic_suspend,
- .resume = usb_generic_resume,
-};
-
/* format to disable USB on kernel command line is: nousb */
__module_param_call("", nousb, param_set_bool, param_get_bool, &nousb, 0444);
{
int retval;
if (nousb) {
- pr_info ("%s: USB support disabled\n", usbcore_name);
+ pr_info("%s: USB support disabled\n", usbcore_name);
return 0;
}
+ retval = ksuspend_usb_init();
+ if (retval)
+ goto out;
retval = bus_register(&usb_bus_type);
if (retval)
- goto out;
+ goto bus_register_failed;
retval = usb_host_init();
if (retval)
goto host_init_failed;
retval = usb_register(&usbfs_driver);
if (retval)
goto driver_register_failed;
- retval = usbdev_init();
+ retval = usb_devio_init();
if (retval)
- goto usbdevice_init_failed;
+ goto usb_devio_init_failed;
retval = usbfs_init();
if (retval)
goto fs_init_failed;
retval = usb_hub_init();
if (retval)
goto hub_init_failed;
- retval = driver_register(&usb_generic_driver);
+ retval = usb_register_device_driver(&usb_generic_driver, THIS_MODULE);
if (!retval)
goto out;
hub_init_failed:
usbfs_cleanup();
fs_init_failed:
- usbdev_cleanup();
-usbdevice_init_failed:
+ usb_devio_cleanup();
+usb_devio_init_failed:
usb_deregister(&usbfs_driver);
driver_register_failed:
usb_major_cleanup();
usb_host_cleanup();
host_init_failed:
bus_unregister(&usb_bus_type);
+bus_register_failed:
+ ksuspend_usb_cleanup();
out:
return retval;
}
if (nousb)
return;
- driver_unregister(&usb_generic_driver);
+ usb_deregister_device_driver(&usb_generic_driver);
usb_major_cleanup();
usbfs_cleanup();
usb_deregister(&usbfs_driver);
- usbdev_cleanup();
+ usb_devio_cleanup();
usb_hub_cleanup();
usb_host_cleanup();
bus_unregister(&usb_bus_type);
+ ksuspend_usb_cleanup();
}
subsys_initcall(usb_init);
EXPORT_SYMBOL(usb_lock_device_for_reset);
-EXPORT_SYMBOL(usb_driver_claim_interface);
-EXPORT_SYMBOL(usb_driver_release_interface);
EXPORT_SYMBOL(usb_find_interface);
EXPORT_SYMBOL(usb_ifnum_to_if);
EXPORT_SYMBOL(usb_altnum_to_altsetting);
-EXPORT_SYMBOL(usb_reset_device);
-EXPORT_SYMBOL(usb_reset_composite_device);
-
EXPORT_SYMBOL(__usb_get_extra_descriptor);
EXPORT_SYMBOL(usb_find_device);
EXPORT_SYMBOL(usb_get_current_frame_number);
-EXPORT_SYMBOL (usb_buffer_alloc);
-EXPORT_SYMBOL (usb_buffer_free);
+EXPORT_SYMBOL(usb_buffer_alloc);
+EXPORT_SYMBOL(usb_buffer_free);
#if 0
-EXPORT_SYMBOL (usb_buffer_map);
-EXPORT_SYMBOL (usb_buffer_dmasync);
-EXPORT_SYMBOL (usb_buffer_unmap);
+EXPORT_SYMBOL(usb_buffer_map);
+EXPORT_SYMBOL(usb_buffer_dmasync);
+EXPORT_SYMBOL(usb_buffer_unmap);
#endif
-EXPORT_SYMBOL (usb_buffer_map_sg);
+EXPORT_SYMBOL(usb_buffer_map_sg);
#if 0
-EXPORT_SYMBOL (usb_buffer_dmasync_sg);
+EXPORT_SYMBOL(usb_buffer_dmasync_sg);
#endif
-EXPORT_SYMBOL (usb_buffer_unmap_sg);
+EXPORT_SYMBOL(usb_buffer_unmap_sg);
MODULE_LICENSE("GPL");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff