#include <linux/ioctl.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
+#include <linux/usb/hcd.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
+#include <linux/pm_runtime.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
#include "usb.h"
-#include "hcd.h"
-#include "hub.h"
/* if we are in debug mode, always announce new devices */
#ifdef DEBUG
/* buffer for urb ... with extra space in case of babble */
char (*buffer)[8];
- dma_addr_t buffer_dma; /* DMA address for buffer */
union {
struct usb_hub_status hub;
struct usb_port_status port;
status change */
unsigned long busy_bits[1]; /* ports being reset or
resumed */
+ unsigned long removed_bits[1]; /* ports with a "removed"
+ device present */
#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
#error event_bits[] is too short!
#endif
u8 indicator[USB_MAXCHILDREN];
struct delayed_work leds;
struct delayed_work init_work;
+ void **port_owners;
};
static inline char *portspeed(int portstatus)
{
- if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
+ if (portstatus & USB_PORT_STAT_HIGH_SPEED)
return "480 Mb/s";
- else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
+ else if (portstatus & USB_PORT_STAT_LOW_SPEED)
return "1.5 Mb/s";
+ else if (portstatus & USB_PORT_STAT_SUPER_SPEED)
+ return "5.0 Gb/s";
else
return "12 Mb/s";
}
/* Note that hdev or one of its children must be locked! */
-static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
+static struct usb_hub *hdev_to_hub(struct usb_device *hdev)
{
+ if (!hdev || !hdev->actconfig)
+ return NULL;
return usb_get_intfdata(hdev->actconfig->interface[0]);
}
{
unsigned long flags;
- /* Suppress autosuspend until khubd runs */
- to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
-
spin_lock_irqsave(&hub_event_lock, flags);
if (!hub->disconnected && list_empty(&hub->event_list)) {
list_add_tail(&hub->event_list, &hub_event_list);
+
+ /* Suppress autosuspend until khubd runs */
+ usb_autopm_get_interface_no_resume(
+ to_usb_interface(hub->intfdev));
wake_up(&khubd_wait);
}
spin_unlock_irqrestore(&hub_event_lock, flags);
void usb_kick_khubd(struct usb_device *hdev)
{
- /* FIXME: What if hdev isn't bound to the hub driver? */
- kick_khubd(hdev_to_hub(hdev));
+ struct usb_hub *hub = hdev_to_hub(hdev);
+
+ if (hub)
+ kick_khubd(hub);
}
{
struct usb_hub *hub = urb->context;
int status = urb->status;
- int i;
+ unsigned i;
unsigned long bits;
switch (status) {
static inline int
hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
{
- return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
+ return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
tt, NULL, 0, 1000);
}
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
{
struct usb_hub *hub =
- container_of(work, struct usb_hub, tt.kevent);
+ container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
int limit = 100;
spin_lock_irqsave (&hub->tt.lock, flags);
while (--limit && !list_empty (&hub->tt.clear_list)) {
- struct list_head *temp;
+ struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
+ const struct hc_driver *drv;
int status;
- temp = hub->tt.clear_list.next;
- clear = list_entry (temp, struct usb_tt_clear, clear_list);
+ next = hub->tt.clear_list.next;
+ clear = list_entry (next, struct usb_tt_clear, clear_list);
list_del (&clear->clear_list);
/* drop lock so HCD can concurrently report other TT errors */
spin_unlock_irqrestore (&hub->tt.lock, flags);
status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
- spin_lock_irqsave (&hub->tt.lock, flags);
-
if (status)
dev_err (&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
+
+ /* Tell the HCD, even if the operation failed */
+ drv = clear->hcd->driver;
+ if (drv->clear_tt_buffer_complete)
+ (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
kfree(clear);
+ spin_lock_irqsave(&hub->tt.lock, flags);
}
spin_unlock_irqrestore (&hub->tt.lock, flags);
}
/**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
*
* High speed HCDs use this to tell the hub driver that some split control or
* bulk transaction failed in a way that requires clearing internal state of
* It may not be possible for that hub to handle additional full (or low)
* speed transactions until that state is fully cleared out.
*/
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
{
+ struct usb_device *udev = urb->dev;
+ int pipe = urb->pipe;
struct usb_tt *tt = udev->tt;
unsigned long flags;
struct usb_tt_clear *clear;
if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
- return;
+ return -ENOMEM;
}
/* info that CLEAR_TT_BUFFER needs */
: (USB_ENDPOINT_XFER_BULK << 11);
if (usb_pipein (pipe))
clear->devinfo |= 1 << 15;
-
+
+ /* info for completion callback */
+ clear->hcd = bus_to_hcd(udev->bus);
+ clear->ep = urb->ep;
+
/* tell keventd to clear state for this TT */
spin_lock_irqsave (&tt->lock, flags);
list_add_tail (&clear->clear_list, &tt->clear_list);
- schedule_work (&tt->kevent);
+ schedule_work(&tt->clear_work);
spin_unlock_irqrestore (&tt->lock, flags);
+ return 0;
}
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
/* If do_delay is false, return the number of milliseconds the caller
* needs to delay.
kick_khubd(hub);
}
+/**
+ * usb_remove_device - disable a device's port on its parent hub
+ * @udev: device to be disabled and removed
+ * Context: @udev locked, must be able to sleep.
+ *
+ * After @udev's port has been disabled, khubd is notified and it will
+ * see that the device has been disconnected. When the device is
+ * physically unplugged and something is plugged in, the events will
+ * be received and processed normally.
+ */
+int usb_remove_device(struct usb_device *udev)
+{
+ struct usb_hub *hub;
+ struct usb_interface *intf;
+
+ if (!udev->parent) /* Can't remove a root hub */
+ return -EINVAL;
+ hub = hdev_to_hub(udev->parent);
+ intf = to_usb_interface(hub->intfdev);
+
+ usb_autopm_get_interface(intf);
+ set_bit(udev->portnum, hub->removed_bits);
+ hub_port_logical_disconnect(hub, udev->portnum);
+ usb_autopm_put_interface(intf);
+ return 0;
+}
+
enum hub_activation_type {
- HUB_INIT, HUB_INIT2, HUB_INIT3,
+ HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */
HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME,
};
msecs_to_jiffies(delay));
/* Suppress autosuspend until init is done */
- to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
+ usb_autopm_get_interface_no_resume(
+ to_usb_interface(hub->intfdev));
return; /* Continues at init2: below */
} else {
hub_power_on(hub, true);
USB_PORT_FEAT_C_ENABLE);
}
+ /* We can forget about a "removed" device when there's a
+ * physical disconnect or the connect status changes.
+ */
+ if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+ (portchange & USB_PORT_STAT_C_CONNECTION))
+ clear_bit(port1, hub->removed_bits);
+
if (!udev || udev->state == USB_STATE_NOTATTACHED) {
/* Tell khubd to disconnect the device or
* check for a new connection
/* Scan all ports that need attention */
kick_khubd(hub);
+
+ /* Allow autosuspend if it was suppressed */
+ if (type <= HUB_INIT3)
+ usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
}
/* Implement the continuations for the delays above */
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
if (hub->tt.hub)
- cancel_work_sync(&hub->tt.kevent);
+ cancel_work_sync(&hub->tt.clear_work);
}
/* caller has locked the hub device */
static int hub_configure(struct usb_hub *hub,
struct usb_endpoint_descriptor *endpoint)
{
+ struct usb_hcd *hcd;
struct usb_device *hdev = hub->hdev;
struct device *hub_dev = hub->intfdev;
u16 hubstatus, hubchange;
u16 wHubCharacteristics;
unsigned int pipe;
int maxp, ret;
- char *message;
+ char *message = "out of memory";
- hub->buffer = usb_buffer_alloc(hdev, sizeof(*hub->buffer), GFP_KERNEL,
- &hub->buffer_dma);
+ hub->buffer = kmalloc(sizeof(*hub->buffer), GFP_KERNEL);
if (!hub->buffer) {
- message = "can't allocate hub irq buffer";
ret = -ENOMEM;
goto fail;
}
hub->status = kmalloc(sizeof(*hub->status), GFP_KERNEL);
if (!hub->status) {
- message = "can't kmalloc hub status buffer";
ret = -ENOMEM;
goto fail;
}
hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
if (!hub->descriptor) {
- message = "can't kmalloc hub descriptor";
ret = -ENOMEM;
goto fail;
}
dev_info (hub_dev, "%d port%s detected\n", hdev->maxchild,
(hdev->maxchild == 1) ? "" : "s");
+ hub->port_owners = kzalloc(hdev->maxchild * sizeof(void *), GFP_KERNEL);
+ if (!hub->port_owners) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
if (wHubCharacteristics & HUB_CHAR_COMPOUND) {
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
- INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+ INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
ret);
hub->tt.hub = hdev;
break;
+ case 3:
+ /* USB 3.0 hubs don't have a TT */
+ break;
default:
dev_dbg(hub_dev, "Unrecognized hub protocol %d\n",
hdev->descriptor.bDeviceProtocol);
dev_dbg(hub_dev, "%umA bus power budget for each child\n",
hub->mA_per_port);
+ /* Update the HCD's internal representation of this hub before khubd
+ * starts getting port status changes for devices under the hub.
+ */
+ hcd = bus_to_hcd(hdev->bus);
+ if (hcd->driver->update_hub_device) {
+ ret = hcd->driver->update_hub_device(hcd, hdev,
+ &hub->tt, GFP_KERNEL);
+ if (ret < 0) {
+ message = "can't update HCD hub info";
+ goto fail;
+ }
+ }
+
ret = hub_hub_status(hub, &hubstatus, &hubchange);
if (ret < 0) {
message = "can't get hub status";
hub->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!hub->urb) {
- message = "couldn't allocate interrupt urb";
ret = -ENOMEM;
goto fail;
}
usb_fill_int_urb(hub->urb, hdev, pipe, *hub->buffer, maxp, hub_irq,
hub, endpoint->bInterval);
- hub->urb->transfer_dma = hub->buffer_dma;
- hub->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
/* maybe cycle the hub leds */
if (hub->has_indicators && blinkenlights)
/* Take the hub off the event list and don't let it be added again */
spin_lock_irq(&hub_event_lock);
- list_del_init(&hub->event_list);
+ if (!list_empty(&hub->event_list)) {
+ list_del_init(&hub->event_list);
+ usb_autopm_put_interface_no_suspend(intf);
+ }
hub->disconnected = 1;
spin_unlock_irq(&hub_event_lock);
hub_quiesce(hub, HUB_DISCONNECT);
usb_set_intfdata (intf, NULL);
+ hub->hdev->maxchild = 0;
if (hub->hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
usb_free_urb(hub->urb);
+ kfree(hub->port_owners);
kfree(hub->descriptor);
kfree(hub->status);
- usb_buffer_free(hub->hdev, sizeof(*hub->buffer), hub->buffer,
- hub->buffer_dma);
+ kfree(hub->buffer);
kref_put(&hub->kref, hub_release);
}
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
+ /* Hubs have proper suspend/resume support */
+ usb_enable_autosuspend(hdev);
+
if (hdev->level == MAX_TOPO_LEVEL) {
dev_err(&intf->dev,
"Unsupported bus topology: hub nested too deep\n");
}
}
+/*
+ * Allow user programs to claim ports on a hub. When a device is attached
+ * to one of these "claimed" ports, the program will "own" the device.
+ */
+static int find_port_owner(struct usb_device *hdev, unsigned port1,
+ void ***ppowner)
+{
+ if (hdev->state == USB_STATE_NOTATTACHED)
+ return -ENODEV;
+ if (port1 == 0 || port1 > hdev->maxchild)
+ return -EINVAL;
+
+ /* This assumes that devices not managed by the hub driver
+ * will always have maxchild equal to 0.
+ */
+ *ppowner = &(hdev_to_hub(hdev)->port_owners[port1 - 1]);
+ return 0;
+}
+
+/* In the following three functions, the caller must hold hdev's lock */
+int usb_hub_claim_port(struct usb_device *hdev, unsigned port1, void *owner)
+{
+ int rc;
+ void **powner;
+
+ rc = find_port_owner(hdev, port1, &powner);
+ if (rc)
+ return rc;
+ if (*powner)
+ return -EBUSY;
+ *powner = owner;
+ return rc;
+}
+
+int usb_hub_release_port(struct usb_device *hdev, unsigned port1, void *owner)
+{
+ int rc;
+ void **powner;
+
+ rc = find_port_owner(hdev, port1, &powner);
+ if (rc)
+ return rc;
+ if (*powner != owner)
+ return -ENOENT;
+ *powner = NULL;
+ return rc;
+}
+
+void usb_hub_release_all_ports(struct usb_device *hdev, void *owner)
+{
+ int n;
+ void **powner;
+
+ n = find_port_owner(hdev, 1, &powner);
+ if (n == 0) {
+ for (; n < hdev->maxchild; (++n, ++powner)) {
+ if (*powner == owner)
+ *powner = NULL;
+ }
+ }
+}
+
+/* The caller must hold udev's lock */
+bool usb_device_is_owned(struct usb_device *udev)
+{
+ struct usb_hub *hub;
+
+ if (udev->state == USB_STATE_NOTATTACHED || !udev->parent)
+ return false;
+ hub = hdev_to_hub(udev->parent);
+ return !!hub->port_owners[udev->portnum - 1];
+}
+
static void recursively_mark_NOTATTACHED(struct usb_device *udev)
{
if (udev->children[i])
recursively_mark_NOTATTACHED(udev->children[i]);
}
- if (udev->state == USB_STATE_SUSPENDED) {
- udev->discon_suspended = 1;
+ if (udev->state == USB_STATE_SUSPENDED)
udev->active_duration -= jiffies;
- }
udev->state = USB_STATE_NOTATTACHED;
}
|| new_state == USB_STATE_SUSPENDED)
; /* No change to wakeup settings */
else if (new_state == USB_STATE_CONFIGURED)
- device_init_wakeup(&udev->dev,
+ device_set_wakeup_capable(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
else
- device_init_wakeup(&udev->dev, 0);
+ device_set_wakeup_capable(&udev->dev, 0);
}
if (udev->state == USB_STATE_SUSPENDED &&
new_state != USB_STATE_SUSPENDED)
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
+EXPORT_SYMBOL_GPL(usb_set_device_state);
/*
* WUSB devices are simple: they have no hubs behind, so the mapping
* 0 is reserved by USB for default address; (b) Linux's USB stack
* uses always #1 for the root hub of the controller. So USB stack's
* port #1, which is wusb virtual-port #0 has address #2.
+ *
+ * Devices connected under xHCI are not as simple. The host controller
+ * supports virtualization, so the hardware assigns device addresses and
+ * the HCD must setup data structures before issuing a set address
+ * command to the hardware.
*/
static void choose_address(struct usb_device *udev)
{
udev->devnum = devnum;
}
-#ifdef CONFIG_USB_SUSPEND
-
-static void usb_stop_pm(struct usb_device *udev)
+static void hub_free_dev(struct usb_device *udev)
{
- /* Synchronize with the ksuspend thread to prevent any more
- * autosuspend requests from being submitted, and decrement
- * the parent's count of unsuspended children.
- */
- usb_pm_lock(udev);
- if (udev->parent && !udev->discon_suspended)
- usb_autosuspend_device(udev->parent);
- usb_pm_unlock(udev);
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
- /* Stop any autosuspend or autoresume requests already submitted */
- cancel_delayed_work_sync(&udev->autosuspend);
- cancel_work_sync(&udev->autoresume);
+ /* Root hubs aren't real devices, so don't free HCD resources */
+ if (hcd->driver->free_dev && udev->parent)
+ hcd->driver->free_dev(hcd, udev);
}
-#else
-
-static inline void usb_stop_pm(struct usb_device *udev)
-{ }
-
-#endif
-
/**
* usb_disconnect - disconnect a device (usbcore-internal)
* @pdev: pointer to device being disconnected
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
- usb_stop_pm(udev);
+ hub_free_dev(udev);
put_device(&udev->dev);
}
#endif
/**
- * usb_configure_device_otg - FIXME (usbcore-internal)
+ * usb_enumerate_device_otg - FIXME (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
- * Do configuration for On-The-Go devices
+ * Finish enumeration for On-The-Go devices
*/
-static int usb_configure_device_otg(struct usb_device *udev)
+static int usb_enumerate_device_otg(struct usb_device *udev)
{
int err = 0;
if (!udev->bus->is_b_host
&& udev->config
&& udev->parent == udev->bus->root_hub) {
- struct usb_otg_descriptor *desc = 0;
+ struct usb_otg_descriptor *desc = NULL;
struct usb_bus *bus = udev->bus;
/* descriptor may appear anywhere in config */
/**
- * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal)
+ * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
* This is only called by usb_new_device() and usb_authorize_device()
* the string descriptors, as they will be errored out by the device
* until it has been authorized.
*/
-static int usb_configure_device(struct usb_device *udev)
+static int usb_enumerate_device(struct usb_device *udev)
{
int err;
udev->descriptor.iManufacturer);
udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
}
- err = usb_configure_device_otg(udev);
+ err = usb_enumerate_device_otg(udev);
fail:
return err;
}
* usb_new_device - perform initial device setup (usbcore-internal)
* @udev: newly addressed device (in ADDRESS state)
*
- * This is called with devices which have been enumerated, but not yet
- * configured. The device descriptor is available, but not descriptors
+ * This is called with devices which have been detected but not fully
+ * enumerated. The device descriptor is available, but not descriptors
* for any device configuration. The caller must have locked either
* the parent hub (if udev is a normal device) or else the
* usb_bus_list_lock (if udev is a root hub). The parent's pointer to
{
int err;
- /* Increment the parent's count of unsuspended children */
- if (udev->parent)
- usb_autoresume_device(udev->parent);
+ if (udev->parent) {
+ /* Initialize non-root-hub device wakeup to disabled;
+ * device (un)configuration controls wakeup capable
+ * sysfs power/wakeup controls wakeup enabled/disabled
+ */
+ device_init_wakeup(&udev->dev, 0);
+ }
- usb_detect_quirks(udev); /* Determine quirks */
- err = usb_configure_device(udev); /* detect & probe dev/intfs */
+ /* Tell the runtime-PM framework the device is active */
+ pm_runtime_set_active(&udev->dev);
+ pm_runtime_enable(&udev->dev);
+
+ usb_detect_quirks(udev);
+ err = usb_enumerate_device(udev); /* Read descriptors */
if (err < 0)
goto fail;
+ dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n",
+ udev->devnum, udev->bus->busnum,
+ (((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
/* export the usbdev device-node for libusb */
udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
(((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
/* Tell the world! */
announce_device(udev);
+ device_enable_async_suspend(&udev->dev);
/* Register the device. The device driver is responsible
* for configuring the device and invoking the add-device
* notifier chain (used by usbfs and possibly others).
fail:
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
- usb_stop_pm(udev);
+ pm_runtime_disable(&udev->dev);
+ pm_runtime_set_suspended(&udev->dev);
return err;
}
*/
int usb_deauthorize_device(struct usb_device *usb_dev)
{
- unsigned cnt;
usb_lock_device(usb_dev);
if (usb_dev->authorized == 0)
goto out_unauthorized;
+
usb_dev->authorized = 0;
usb_set_configuration(usb_dev, -1);
+
+ kfree(usb_dev->product);
usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ kfree(usb_dev->manufacturer);
usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
+ kfree(usb_dev->serial);
usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
- kfree(usb_dev->config);
- usb_dev->config = NULL;
- for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++)
- kfree(usb_dev->rawdescriptors[cnt]);
+
+ usb_destroy_configuration(usb_dev);
usb_dev->descriptor.bNumConfigurations = 0;
- kfree(usb_dev->rawdescriptors);
+
out_unauthorized:
usb_unlock_device(usb_dev);
return 0;
int usb_authorize_device(struct usb_device *usb_dev)
{
int result = 0, c;
+
usb_lock_device(usb_dev);
if (usb_dev->authorized == 1)
goto out_authorized;
- kfree(usb_dev->product);
- usb_dev->product = NULL;
- kfree(usb_dev->manufacturer);
- usb_dev->manufacturer = NULL;
- kfree(usb_dev->serial);
- usb_dev->serial = NULL;
+
result = usb_autoresume_device(usb_dev);
if (result < 0) {
dev_err(&usb_dev->dev,
"authorization: %d\n", result);
goto error_device_descriptor;
}
+
+ kfree(usb_dev->product);
+ usb_dev->product = NULL;
+ kfree(usb_dev->manufacturer);
+ usb_dev->manufacturer = NULL;
+ kfree(usb_dev->serial);
+ usb_dev->serial = NULL;
+
usb_dev->authorized = 1;
- result = usb_configure_device(usb_dev);
+ result = usb_enumerate_device(usb_dev);
if (result < 0)
- goto error_configure;
+ goto error_enumerate;
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
}
}
dev_info(&usb_dev->dev, "authorized to connect\n");
-error_configure:
+
+error_enumerate:
error_device_descriptor:
+ usb_autosuspend_device(usb_dev);
error_autoresume:
out_authorized:
usb_unlock_device(usb_dev); // complements locktree
if (!(portstatus & USB_PORT_STAT_RESET) &&
(portstatus & USB_PORT_STAT_ENABLE)) {
if (hub_is_wusb(hub))
- udev->speed = USB_SPEED_VARIABLE;
+ udev->speed = USB_SPEED_WIRELESS;
else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
struct usb_device *udev, unsigned int delay)
{
int i, status;
+ struct usb_hcd *hcd;
+ hcd = bus_to_hcd(udev->bus);
/* Block EHCI CF initialization during the port reset.
* Some companion controllers don't like it when they mix.
*/
/* TRSTRCY = 10 ms; plus some extra */
msleep(10 + 40);
update_address(udev, 0);
+ if (hcd->driver->reset_device) {
+ status = hcd->driver->reset_device(hcd, udev);
+ if (status < 0) {
+ dev_err(&udev->dev, "Cannot reset "
+ "HCD device state\n");
+ break;
+ }
+ }
/* FALL THROUGH */
case -ENOTCONN:
case -ENODEV:
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
- if (status)
+ if (status) {
dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
status);
+ /* bail if autosuspend is requested */
+ if (msg.event & PM_EVENT_AUTO)
+ return status;
+ }
}
/* see 7.1.7.6 */
dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
port1, status);
/* paranoia: "should not happen" */
- (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ if (udev->do_remote_wakeup)
+ (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
}
/* caller has locked udev */
-static int remote_wakeup(struct usb_device *udev)
+int usb_remote_wakeup(struct usb_device *udev)
{
int status = 0;
if (udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
- usb_mark_last_busy(udev);
- status = usb_external_resume_device(udev, PMSG_REMOTE_RESUME);
+ status = usb_autoresume_device(udev);
+ if (status == 0) {
+ /* Let the drivers do their thing, then... */
+ usb_autosuspend_device(udev);
+ }
}
return status;
}
return status;
}
-static inline int remote_wakeup(struct usb_device *udev)
-{
- return 0;
-}
-
#endif
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
#else /* CONFIG_PM */
-static inline int remote_wakeup(struct usb_device *udev)
-{
- return 0;
-}
-
#define hub_suspend NULL
#define hub_resume NULL
#define hub_reset_resume NULL
static int hub_set_address(struct usb_device *udev, int devnum)
{
int retval;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
- if (devnum <= 1)
+ /*
+ * The host controller will choose the device address,
+ * instead of the core having chosen it earlier
+ */
+ if (!hcd->driver->address_device && devnum <= 1)
return -EINVAL;
if (udev->state == USB_STATE_ADDRESS)
return 0;
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
- retval = usb_control_msg(udev, usb_sndaddr0pipe(),
- USB_REQ_SET_ADDRESS, 0, devnum, 0,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (hcd->driver->address_device) {
+ retval = hcd->driver->address_device(hcd, udev);
+ } else {
+ retval = usb_control_msg(udev, usb_sndaddr0pipe(),
+ USB_REQ_SET_ADDRESS, 0, devnum, 0,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (retval == 0)
+ update_address(udev, devnum);
+ }
if (retval == 0) {
/* Device now using proper address. */
- update_address(udev, devnum);
usb_set_device_state(udev, USB_STATE_ADDRESS);
usb_ep0_reinit(udev);
}
static DEFINE_MUTEX(usb_address0_mutex);
struct usb_device *hdev = hub->hdev;
+ struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
mutex_lock(&usb_address0_mutex);
- /* Reset the device; full speed may morph to high speed */
- retval = hub_port_reset(hub, port1, udev, delay);
- if (retval < 0) /* error or disconnect */
- goto fail;
- /* success, speed is known */
+ if (!udev->config && oldspeed == USB_SPEED_SUPER) {
+ /* Don't reset USB 3.0 devices during an initial setup */
+ usb_set_device_state(udev, USB_STATE_DEFAULT);
+ } else {
+ /* Reset the device; full speed may morph to high speed */
+ /* FIXME a USB 2.0 device may morph into SuperSpeed on reset. */
+ retval = hub_port_reset(hub, port1, udev, delay);
+ if (retval < 0) /* error or disconnect */
+ goto fail;
+ /* success, speed is known */
+ }
retval = -ENODEV;
if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) {
* reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
- case USB_SPEED_VARIABLE: /* fixed at 512 */
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+ case USB_SPEED_SUPER:
+ case USB_SPEED_WIRELESS: /* fixed at 512 */
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
break;
case USB_SPEED_HIGH: /* fixed at 64 */
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
break;
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
/* to determine the ep0 maxpacket size, try to read
* the device descriptor to get bMaxPacketSize0 and
* then correct our initial guess.
*/
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
break;
case USB_SPEED_LOW: /* fixed at 8 */
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
break;
default:
goto fail;
case USB_SPEED_LOW: speed = "low"; break;
case USB_SPEED_FULL: speed = "full"; break;
case USB_SPEED_HIGH: speed = "high"; break;
- case USB_SPEED_VARIABLE:
+ case USB_SPEED_SUPER:
+ speed = "super";
+ break;
+ case USB_SPEED_WIRELESS:
speed = "variable";
type = "Wireless ";
break;
default: speed = "?"; break;
}
- dev_info (&udev->dev,
- "%s %s speed %sUSB device using %s and address %d\n",
- (udev->config) ? "reset" : "new", speed, type,
- udev->bus->controller->driver->name, devnum);
+ if (udev->speed != USB_SPEED_SUPER)
+ dev_info(&udev->dev,
+ "%s %s speed %sUSB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new", speed, type,
+ udev->bus->controller->driver->name, devnum);
/* Set up TT records, if needed */
if (hdev->tt) {
* value.
*/
for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
- if (USE_NEW_SCHEME(retry_counter)) {
+ /*
+ * An xHCI controller cannot send any packets to a device until
+ * a set address command successfully completes.
+ */
+ if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
struct usb_device_descriptor *buf;
int r = 0;
* unauthorized address in the Connect Ack sequence;
* authorization will assign the final address.
*/
- if (udev->wusb == 0) {
+ if (udev->wusb == 0) {
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev, devnum);
if (retval >= 0)
devnum, retval);
goto fail;
}
+ if (udev->speed == USB_SPEED_SUPER) {
+ devnum = udev->devnum;
+ dev_info(&udev->dev,
+ "%s SuperSpeed USB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new",
+ udev->bus->controller->driver->name, devnum);
+ }
/* cope with hardware quirkiness:
* - let SET_ADDRESS settle, some device hardware wants it
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
- if (USE_NEW_SCHEME(retry_counter))
+ if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
break;
}
if (retval)
goto fail;
- i = udev->descriptor.bMaxPacketSize0 == 0xff? /* wusb device? */
- 512 : udev->descriptor.bMaxPacketSize0;
+ if (udev->descriptor.bMaxPacketSize0 == 0xff ||
+ udev->speed == USB_SPEED_SUPER)
+ i = 512;
+ else
+ i = udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
/* For a suspended device, treat this as a
* remote wakeup event.
*/
- if (udev->do_remote_wakeup)
- status = remote_wakeup(udev);
-
- /* Otherwise leave it be; devices can't tell the
- * difference between suspended and disabled.
- */
- else
- status = 0;
+ status = usb_remote_wakeup(udev);
#endif
} else {
usb_disconnect(&hdev->children[port1-1]);
clear_bit(port1, hub->change_bits);
+ /* We can forget about a "removed" device when there's a physical
+ * disconnect or the connect status changes.
+ */
+ if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+ (portchange & USB_PORT_STAT_C_CONNECTION))
+ clear_bit(port1, hub->removed_bits);
+
if (portchange & (USB_PORT_STAT_C_CONNECTION |
USB_PORT_STAT_C_ENABLE)) {
status = hub_port_debounce(hub, port1);
}
}
- /* Return now if debouncing failed or nothing is connected */
- if (!(portstatus & USB_PORT_STAT_CONNECTION)) {
+ /* Return now if debouncing failed or nothing is connected or
+ * the device was "removed".
+ */
+ if (!(portstatus & USB_PORT_STAT_CONNECTION) ||
+ test_bit(port1, hub->removed_bits)) {
/* maybe switch power back on (e.g. root hub was reset) */
if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
- && !(portstatus & (1 << USB_PORT_FEAT_POWER)))
+ && !(portstatus & USB_PORT_STAT_POWER))
set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
if (portstatus & USB_PORT_STAT_ENABLE)
}
usb_set_device_state(udev, USB_STATE_POWERED);
- udev->speed = USB_SPEED_UNKNOWN;
udev->bus_mA = hub->mA_per_port;
udev->level = hdev->level + 1;
udev->wusb = hub_is_wusb(hub);
- /* set the address */
- choose_address(udev);
- if (udev->devnum <= 0) {
- status = -ENOTCONN; /* Don't retry */
- goto loop;
+ /*
+ * USB 3.0 devices are reset automatically before the connect
+ * port status change appears, and the root hub port status
+ * shows the correct speed. We also get port change
+ * notifications for USB 3.0 devices from the USB 3.0 portion of
+ * an external USB 3.0 hub, but this isn't handled correctly yet
+ * FIXME.
+ */
+
+ if (!(hcd->driver->flags & HCD_USB3))
+ udev->speed = USB_SPEED_UNKNOWN;
+ else if ((hdev->parent == NULL) &&
+ (portstatus & USB_PORT_STAT_SUPER_SPEED))
+ udev->speed = USB_SPEED_SUPER;
+ else
+ udev->speed = USB_SPEED_UNKNOWN;
+
+ /*
+ * xHCI needs to issue an address device command later
+ * in the hub_port_init sequence for SS/HS/FS/LS devices.
+ */
+ if (!(hcd->driver->flags & HCD_USB3)) {
+ /* set the address */
+ choose_address(udev);
+ if (udev->devnum <= 0) {
+ status = -ENOTCONN; /* Don't retry */
+ goto loop;
+ }
}
- /* reset and get descriptor */
+ /* reset (non-USB 3.0 devices) and get descriptor */
status = hub_port_init(hub, udev, port1, i);
if (status < 0)
goto loop;
loop:
usb_ep0_reinit(udev);
release_address(udev);
+ hub_free_dev(udev);
usb_put_dev(udev);
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
* disconnected while waiting for the lock to succeed. */
usb_lock_device(hdev);
if (unlikely(hub->disconnected))
- goto loop;
+ goto loop_disconnected;
/* If the hub has died, clean up after it */
if (hdev->state == USB_STATE_NOTATTACHED) {
USB_PORT_FEAT_C_SUSPEND);
udev = hdev->children[i-1];
if (udev) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+
usb_lock_device(udev);
- ret = remote_wakeup(hdev->
+ ret = usb_remote_wakeup(hdev->
children[i-1]);
usb_unlock_device(udev);
if (ret < 0)
}
}
-loop_autopm:
- /* Allow autosuspend if we're not going to run again */
- if (list_empty(&hub->event_list))
- usb_autopm_enable(intf);
-loop:
+ loop_autopm:
+ /* Balance the usb_autopm_get_interface() above */
+ usb_autopm_put_interface_no_suspend(intf);
+ loop:
+ /* Balance the usb_autopm_get_interface_no_resume() in
+ * kick_khubd() and allow autosuspend.
+ */
+ usb_autopm_put_interface(intf);
+ loop_disconnected:
usb_unlock_device(hdev);
kref_put(&hub->kref, hub_release);
return 0;
}
-static struct usb_device_id hub_id_table [] = {
+static const struct usb_device_id hub_id_table[] = {
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
.bDeviceClass = USB_CLASS_HUB},
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
{
struct usb_device *parent_hdev = udev->parent;
struct usb_hub *parent_hub;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
struct usb_device_descriptor descriptor = udev->descriptor;
int i, ret = 0;
int port1 = udev->portnum;
udev->descriptor = descriptor; /* for disconnect() calls */
goto re_enumerate;
}
-
+
+ /* Restore the device's previous configuration */
if (!udev->actconfig)
goto done;
+ mutex_lock(&hcd->bandwidth_mutex);
+ ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL);
+ if (ret < 0) {
+ dev_warn(&udev->dev,
+ "Busted HC? Not enough HCD resources for "
+ "old configuration.\n");
+ mutex_unlock(&hcd->bandwidth_mutex);
+ goto re_enumerate;
+ }
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_CONFIGURATION, 0,
udev->actconfig->desc.bConfigurationValue, 0,
dev_err(&udev->dev,
"can't restore configuration #%d (error=%d)\n",
udev->actconfig->desc.bConfigurationValue, ret);
+ mutex_unlock(&hcd->bandwidth_mutex);
goto re_enumerate;
}
+ mutex_unlock(&hcd->bandwidth_mutex);
usb_set_device_state(udev, USB_STATE_CONFIGURED);
+ /* Put interfaces back into the same altsettings as before.
+ * Don't bother to send the Set-Interface request for interfaces
+ * that were already in altsetting 0; besides being unnecessary,
+ * many devices can't handle it. Instead just reset the host-side
+ * endpoint state.
+ */
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *intf = udev->actconfig->interface[i];
+ struct usb_host_config *config = udev->actconfig;
+ struct usb_interface *intf = config->interface[i];
struct usb_interface_descriptor *desc;
- /* set_interface resets host side toggle even
- * for altsetting zero. the interface may have no driver.
- */
desc = &intf->cur_altsetting->desc;
- ret = usb_set_interface(udev, desc->bInterfaceNumber,
- desc->bAlternateSetting);
+ if (desc->bAlternateSetting == 0) {
+ usb_disable_interface(udev, intf, true);
+ usb_enable_interface(udev, intf, true);
+ ret = 0;
+ } else {
+ /* Let the bandwidth allocation function know that this
+ * device has been reset, and it will have to use
+ * alternate setting 0 as the current alternate setting.
+ */
+ intf->resetting_device = 1;
+ ret = usb_set_interface(udev, desc->bInterfaceNumber,
+ desc->bAlternateSetting);
+ intf->resetting_device = 0;
+ }
if (ret < 0) {
dev_err(&udev->dev, "failed to restore interface %d "
"altsetting %d (error=%d)\n",
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff