const u8 *bufp = tbuf;
int len = 0;
int patch_wakeup = 0;
- unsigned long flags;
- int status = 0;
+ int status;
int n;
+ might_sleep();
+
+ spin_lock_irq(&hcd_root_hub_lock);
+ status = usb_hcd_link_urb_to_ep(hcd, urb);
+ spin_unlock_irq(&hcd_root_hub_lock);
+ if (status)
+ return status;
+ urb->hcpriv = hcd; /* Indicate it's queued */
+
cmd = (struct usb_ctrlrequest *) urb->setup_packet;
typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
wValue = le16_to_cpu (cmd->wValue);
}
/* any errors get returned through the urb completion */
- local_irq_save (flags);
- spin_lock (&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
- spin_unlock (&urb->lock);
- usb_hcd_giveback_urb (hcd, urb);
- local_irq_restore (flags);
+ spin_lock_irq(&hcd_root_hub_lock);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ /* This peculiar use of spinlocks echoes what real HC drivers do.
+ * Avoiding calls to local_irq_disable/enable makes the code
+ * RT-friendly.
+ */
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&hcd_root_hub_lock);
+
+ spin_unlock_irq(&hcd_root_hub_lock);
return 0;
}
if (length > 0) {
/* try to complete the status urb */
- local_irq_save (flags);
- spin_lock(&hcd_root_hub_lock);
+ spin_lock_irqsave(&hcd_root_hub_lock, flags);
urb = hcd->status_urb;
if (urb) {
- spin_lock(&urb->lock);
- if (urb->status == -EINPROGRESS) {
- hcd->poll_pending = 0;
- hcd->status_urb = NULL;
- urb->status = 0;
- urb->hcpriv = NULL;
- urb->actual_length = length;
- memcpy(urb->transfer_buffer, buffer, length);
- } else /* urb has been unlinked */
- length = 0;
- spin_unlock(&urb->lock);
- } else
- length = 0;
- spin_unlock(&hcd_root_hub_lock);
+ hcd->poll_pending = 0;
+ hcd->status_urb = NULL;
+ urb->actual_length = length;
+ memcpy(urb->transfer_buffer, buffer, length);
- /* local irqs are always blocked in completions */
- if (length > 0)
- usb_hcd_giveback_urb (hcd, urb);
- else
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, 0);
+ spin_lock(&hcd_root_hub_lock);
+ } else {
+ length = 0;
hcd->poll_pending = 1;
- local_irq_restore (flags);
+ }
+ spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
}
/* The USB 2.0 spec says 256 ms. This is close enough and won't
int len = 1 + (urb->dev->maxchild / 8);
spin_lock_irqsave (&hcd_root_hub_lock, flags);
- if (urb->status != -EINPROGRESS) /* already unlinked */
- retval = urb->status;
- else if (hcd->status_urb || urb->transfer_buffer_length < len) {
+ if (hcd->status_urb || urb->transfer_buffer_length < len) {
dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
retval = -EINVAL;
- } else {
- hcd->status_urb = urb;
- urb->hcpriv = hcd; /* indicate it's queued */
+ goto done;
+ }
- if (!hcd->uses_new_polling)
- mod_timer (&hcd->rh_timer,
- (jiffies/(HZ/4) + 1) * (HZ/4));
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval)
+ goto done;
- /* If a status change has already occurred, report it ASAP */
- else if (hcd->poll_pending)
- mod_timer (&hcd->rh_timer, jiffies);
- retval = 0;
- }
+ hcd->status_urb = urb;
+ urb->hcpriv = hcd; /* indicate it's queued */
+ if (!hcd->uses_new_polling)
+ mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+
+ /* If a status change has already occurred, report it ASAP */
+ else if (hcd->poll_pending)
+ mod_timer(&hcd->rh_timer, jiffies);
+ retval = 0;
+ done:
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
return retval;
}
static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
{
- if (usb_pipeint (urb->pipe))
+ if (usb_endpoint_xfer_int(&urb->ep->desc))
return rh_queue_status (hcd, urb);
- if (usb_pipecontrol (urb->pipe))
+ if (usb_endpoint_xfer_control(&urb->ep->desc))
return rh_call_control (hcd, urb);
return -EINVAL;
}
/* Unlinks of root-hub control URBs are legal, but they don't do anything
* since these URBs always execute synchronously.
*/
-static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&hcd_root_hub_lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
- if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */
+ if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
; /* Do nothing */
} else { /* Status URB */
if (!hcd->uses_new_polling)
del_timer (&hcd->rh_timer);
- local_irq_save (flags);
- spin_lock (&hcd_root_hub_lock);
if (urb == hcd->status_urb) {
hcd->status_urb = NULL;
- urb->hcpriv = NULL;
- } else
- urb = NULL; /* wasn't fully queued */
- spin_unlock (&hcd_root_hub_lock);
- if (urb)
- usb_hcd_giveback_urb (hcd, urb);
- local_irq_restore (flags);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&hcd_root_hub_lock);
+ }
}
+ done:
+ spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+ return rc;
+}
- return 0;
+
+
+/*
+ * Show & store the current value of authorized_default
+ */
+static ssize_t usb_host_authorized_default_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *rh_usb_dev = to_usb_device(dev);
+ struct usb_bus *usb_bus = rh_usb_dev->bus;
+ struct usb_hcd *usb_hcd;
+
+ if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
+ return -ENODEV;
+ usb_hcd = bus_to_hcd(usb_bus);
+ return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
+}
+
+static ssize_t usb_host_authorized_default_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ ssize_t result;
+ unsigned val;
+ struct usb_device *rh_usb_dev = to_usb_device(dev);
+ struct usb_bus *usb_bus = rh_usb_dev->bus;
+ struct usb_hcd *usb_hcd;
+
+ if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
+ return -ENODEV;
+ usb_hcd = bus_to_hcd(usb_bus);
+ result = sscanf(buf, "%u\n", &val);
+ if (result == 1) {
+ usb_hcd->authorized_default = val? 1 : 0;
+ result = size;
+ }
+ else
+ result = -EINVAL;
+ return result;
}
+static DEVICE_ATTR(authorized_default, 0644,
+ usb_host_authorized_default_show,
+ usb_host_authorized_default_store);
+
+
+/* Group all the USB bus attributes */
+static struct attribute *usb_bus_attrs[] = {
+ &dev_attr_authorized_default.attr,
+ NULL,
+};
+
+static struct attribute_group usb_bus_attr_group = {
+ .name = NULL, /* we want them in the same directory */
+ .attrs = usb_bus_attrs,
+};
+
+
+
/*-------------------------------------------------------------------------*/
static struct class *usb_host_class;
*/
static int usb_register_bus(struct usb_bus *bus)
{
+ int result = -E2BIG;
int busnum;
mutex_lock(&usb_bus_list_lock);
busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
- if (busnum < USB_MAXBUS) {
- set_bit (busnum, busmap.busmap);
- bus->busnum = busnum;
- } else {
+ if (busnum >= USB_MAXBUS) {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
- mutex_unlock(&usb_bus_list_lock);
- return -E2BIG;
+ goto error_find_busnum;
}
-
+ set_bit (busnum, busmap.busmap);
+ bus->busnum = busnum;
bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
- bus->controller, "usb_host%d", busnum);
- if (IS_ERR(bus->class_dev)) {
- clear_bit(busnum, busmap.busmap);
- mutex_unlock(&usb_bus_list_lock);
- return PTR_ERR(bus->class_dev);
- }
-
+ bus->controller, "usb_host%d",
+ busnum);
+ result = PTR_ERR(bus->class_dev);
+ if (IS_ERR(bus->class_dev))
+ goto error_create_class_dev;
class_set_devdata(bus->class_dev, bus);
/* Add it to the local list of buses */
usb_notify_add_bus(bus);
- dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
+ dev_info (bus->controller, "new USB bus registered, assigned bus "
+ "number %d\n", bus->busnum);
return 0;
+
+error_create_class_dev:
+ clear_bit(busnum, busmap.busmap);
+error_find_busnum:
+ mutex_unlock(&usb_bus_list_lock);
+ return result;
}
/**
/*-------------------------------------------------------------------------*/
-static void urb_unlink(struct usb_hcd *hcd, struct urb *urb)
+/**
+ * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being submitted
+ *
+ * Host controller drivers should call this routine in their enqueue()
+ * method. The HCD's private spinlock must be held and interrupts must
+ * be disabled. The actions carried out here are required for URB
+ * submission, as well as for endpoint shutdown and for usb_kill_urb.
+ *
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the enqueue() method must fail). If no error occurs but enqueue() fails
+ * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
+ * the private spinlock and returning.
+ */
+int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
{
- unsigned long flags;
+ int rc = 0;
- /* clear all state linking urb to this dev (and hcd) */
- spin_lock_irqsave(&hcd_urb_list_lock, flags);
- list_del_init (&urb->urb_list);
- spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
+ spin_lock(&hcd_urb_list_lock);
- if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
- if (usb_pipecontrol (urb->pipe)
- && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
- dma_unmap_single (hcd->self.controller, urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
- dma_unmap_single (hcd->self.controller,
- urb->transfer_dma,
- urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
- ? DMA_FROM_DEVICE
- : DMA_TO_DEVICE);
+ /* Check that the URB isn't being killed */
+ if (unlikely(urb->reject)) {
+ rc = -EPERM;
+ goto done;
}
-}
-
-/* may be called in any context with a valid urb->dev usecount
- * caller surrenders "ownership" of urb
- * expects usb_submit_urb() to have sanity checked and conditioned all
- * inputs in the urb
- */
-int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
-{
- int status;
- struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
- struct usb_host_endpoint *ep;
- unsigned long flags;
- if (!hcd)
- return -ENODEV;
+ if (unlikely(!urb->ep->enabled)) {
+ rc = -ENOENT;
+ goto done;
+ }
- usbmon_urb_submit(&hcd->self, urb);
+ if (unlikely(!urb->dev->can_submit)) {
+ rc = -EHOSTUNREACH;
+ goto done;
+ }
/*
- * Atomically queue the urb, first to our records, then to the HCD.
- * Access to urb->status is controlled by urb->lock ... changes on
- * i/o completion (normal or fault) or unlinking.
+ * Check the host controller's state and add the URB to the
+ * endpoint's queue.
*/
-
- // FIXME: verify that quiescing hc works right (RH cleans up)
-
- spin_lock_irqsave(&hcd_urb_list_lock, flags);
- ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (unlikely (!ep))
- status = -ENOENT;
- else if (unlikely (urb->reject))
- status = -EPERM;
- else switch (hcd->state) {
+ switch (hcd->state) {
case HC_STATE_RUNNING:
case HC_STATE_RESUMING:
- list_add_tail (&urb->urb_list, &ep->urb_list);
- status = 0;
+ urb->unlinked = 0;
+ list_add_tail(&urb->urb_list, &urb->ep->urb_list);
break;
default:
- status = -ESHUTDOWN;
- break;
+ rc = -ESHUTDOWN;
+ goto done;
}
- spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
- if (status) {
- INIT_LIST_HEAD (&urb->urb_list);
- usbmon_urb_submit_error(&hcd->self, urb, status);
- return status;
+ done:
+ spin_unlock(&hcd_urb_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
+
+/**
+ * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being checked for unlinkability
+ * @status: error code to store in @urb if the unlink succeeds
+ *
+ * Host controller drivers should call this routine in their dequeue()
+ * method. The HCD's private spinlock must be held and interrupts must
+ * be disabled. The actions carried out here are required for making
+ * sure than an unlink is valid.
+ *
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the dequeue() method must fail). The possible error codes are:
+ *
+ * -EIDRM: @urb was not submitted or has already completed.
+ * The completion function may not have been called yet.
+ *
+ * -EBUSY: @urb has already been unlinked.
+ */
+int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status)
+{
+ struct list_head *tmp;
+
+ /* insist the urb is still queued */
+ list_for_each(tmp, &urb->ep->urb_list) {
+ if (tmp == &urb->urb_list)
+ break;
}
+ if (tmp != &urb->urb_list)
+ return -EIDRM;
- /* increment urb's reference count as part of giving it to the HCD
- * (which now controls it). HCD guarantees that it either returns
- * an error or calls giveback(), but not both.
+ /* Any status except -EINPROGRESS means something already started to
+ * unlink this URB from the hardware. So there's no more work to do.
*/
- urb = usb_get_urb (urb);
- atomic_inc (&urb->use_count);
-
- if (is_root_hub(urb->dev)) {
- /* NOTE: requirement on hub callers (usbfs and the hub
- * driver, for now) that URBs' urb->transfer_buffer be
- * valid and usb_buffer_{sync,unmap}() not be needed, since
- * they could clobber root hub response data.
- */
- status = rh_urb_enqueue (hcd, urb);
- goto done;
+ if (urb->unlinked)
+ return -EBUSY;
+ urb->unlinked = status;
+
+ /* IRQ setup can easily be broken so that USB controllers
+ * never get completion IRQs ... maybe even the ones we need to
+ * finish unlinking the initial failed usb_set_address()
+ * or device descriptor fetch.
+ */
+ if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
+ !is_root_hub(urb->dev)) {
+ dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
+ "Controller is probably using the wrong IRQ.\n");
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
}
- /* lower level hcd code should use *_dma exclusively,
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
+
+/**
+ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being unlinked
+ *
+ * Host controller drivers should call this routine before calling
+ * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
+ * interrupts must be disabled. The actions carried out here are required
+ * for URB completion.
+ */
+void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
+{
+ /* clear all state linking urb to this dev (and hcd) */
+ spin_lock(&hcd_urb_list_lock);
+ list_del_init(&urb->urb_list);
+ spin_unlock(&hcd_urb_list_lock);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
+
+static void map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ /* Map the URB's buffers for DMA access.
+ * Lower level HCD code should use *_dma exclusively,
* unless it uses pio or talks to another transport.
*/
- if (hcd->self.uses_dma) {
- if (usb_pipecontrol (urb->pipe)
+ if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
urb->setup_dma = dma_map_single (
hcd->self.controller,
hcd->self.controller,
urb->transfer_buffer,
urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_urb_dir_in(urb)
? DMA_FROM_DEVICE
: DMA_TO_DEVICE);
}
+}
- status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags);
-done:
- if (unlikely (status)) {
- urb_unlink(hcd, urb);
- atomic_dec (&urb->use_count);
- if (urb->reject)
- wake_up (&usb_kill_urb_queue);
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+ dma_unmap_single(hcd->self.controller, urb->setup_dma,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ if (urb->transfer_buffer_length != 0
+ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ dma_unmap_single(hcd->self.controller,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ usb_urb_dir_in(urb)
+ ? DMA_FROM_DEVICE
+ : DMA_TO_DEVICE);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* may be called in any context with a valid urb->dev usecount
+ * caller surrenders "ownership" of urb
+ * expects usb_submit_urb() to have sanity checked and conditioned all
+ * inputs in the urb
+ */
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
+{
+ int status;
+ struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
+
+ /* increment urb's reference count as part of giving it to the HCD
+ * (which will control it). HCD guarantees that it either returns
+ * an error or calls giveback(), but not both.
+ */
+ usb_get_urb(urb);
+ atomic_inc(&urb->use_count);
+ atomic_inc(&urb->dev->urbnum);
+ usbmon_urb_submit(&hcd->self, urb);
+
+ /* NOTE requirements on root-hub callers (usbfs and the hub
+ * driver, for now): URBs' urb->transfer_buffer must be
+ * valid and usb_buffer_{sync,unmap}() not be needed, since
+ * they could clobber root hub response data. Also, control
+ * URBs must be submitted in process context with interrupts
+ * enabled.
+ */
+ map_urb_for_dma(hcd, urb);
+ if (is_root_hub(urb->dev))
+ status = rh_urb_enqueue(hcd, urb);
+ else
+ status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+
+ if (unlikely(status)) {
usbmon_urb_submit_error(&hcd->self, urb, status);
- usb_put_urb (urb);
+ unmap_urb_for_dma(hcd, urb);
+ urb->hcpriv = NULL;
+ INIT_LIST_HEAD(&urb->urb_list);
+ atomic_dec(&urb->use_count);
+ atomic_dec(&urb->dev->urbnum);
+ if (urb->reject)
+ wake_up(&usb_kill_urb_queue);
+ usb_put_urb(urb);
}
return status;
}
* soon as practical. we've already set up the urb's return status,
* but we can't know if the callback completed already.
*/
-static int
-unlink1 (struct usb_hcd *hcd, struct urb *urb)
+static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
{
int value;
if (is_root_hub(urb->dev))
- value = usb_rh_urb_dequeue (hcd, urb);
+ value = usb_rh_urb_dequeue(hcd, urb, status);
else {
/* The only reason an HCD might fail this call is if
* it has not yet fully queued the urb to begin with.
* Such failures should be harmless. */
- value = hcd->driver->urb_dequeue (hcd, urb);
+ value = hcd->driver->urb_dequeue(hcd, urb, status);
}
-
- if (value != 0)
- dev_dbg (hcd->self.controller, "dequeue %p --> %d\n",
- urb, value);
return value;
}
*/
int usb_hcd_unlink_urb (struct urb *urb, int status)
{
- struct usb_host_endpoint *ep;
- struct usb_hcd *hcd = NULL;
- struct device *sys = NULL;
- unsigned long flags;
- struct list_head *tmp;
- int retval;
-
- if (!urb)
- return -EINVAL;
- if (!urb->dev || !urb->dev->bus)
- return -ENODEV;
- ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (!ep)
- return -ENODEV;
-
- /*
- * we contend for urb->status with the hcd core,
- * which changes it while returning the urb.
- *
- * Caller guaranteed that the urb pointer hasn't been freed, and
- * that it was submitted. But as a rule it can't know whether or
- * not it's already been unlinked ... so we respect the reversed
- * lock sequence needed for the usb_hcd_giveback_urb() code paths
- * (urb lock, then hcd_urb_list_lock) in case some other CPU is now
- * unlinking it.
- */
- spin_lock_irqsave (&urb->lock, flags);
- spin_lock(&hcd_urb_list_lock);
+ struct usb_hcd *hcd;
+ int retval;
- sys = &urb->dev->dev;
hcd = bus_to_hcd(urb->dev->bus);
- if (hcd == NULL) {
- retval = -ENODEV;
- goto done;
- }
+ retval = unlink1(hcd, urb, status);
- /* insist the urb is still queued */
- list_for_each(tmp, &ep->urb_list) {
- if (tmp == &urb->urb_list)
- break;
- }
- if (tmp != &urb->urb_list) {
- retval = -EIDRM;
- goto done;
- }
-
- /* Any status except -EINPROGRESS means something already started to
- * unlink this URB from the hardware. So there's no more work to do.
- */
- if (urb->status != -EINPROGRESS) {
- retval = -EBUSY;
- goto done;
- }
-
- /* IRQ setup can easily be broken so that USB controllers
- * never get completion IRQs ... maybe even the ones we need to
- * finish unlinking the initial failed usb_set_address()
- * or device descriptor fetch.
- */
- if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
- !is_root_hub(urb->dev)) {
- dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
- "Controller is probably using the wrong IRQ.\n");
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- }
-
- urb->status = status;
-
- spin_unlock(&hcd_urb_list_lock);
- spin_unlock_irqrestore (&urb->lock, flags);
-
- retval = unlink1 (hcd, urb);
if (retval == 0)
retval = -EINPROGRESS;
- return retval;
-
-done:
- spin_unlock(&hcd_urb_list_lock);
- spin_unlock_irqrestore (&urb->lock, flags);
- if (retval != -EIDRM && sys && sys->driver)
- dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval);
+ else if (retval != -EIDRM && retval != -EBUSY)
+ dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
+ urb, retval);
return retval;
}
* usb_hcd_giveback_urb - return URB from HCD to device driver
* @hcd: host controller returning the URB
* @urb: urb being returned to the USB device driver.
+ * @status: completion status code for the URB.
* Context: in_interrupt()
*
* This hands the URB from HCD to its USB device driver, using its
* (and is done using urb->hcpriv). It also released all HCD locks;
* the device driver won't cause problems if it frees, modifies,
* or resubmits this URB.
+ *
+ * If @urb was unlinked, the value of @status will be overridden by
+ * @urb->unlinked. Erroneous short transfers are detected in case
+ * the HCD hasn't checked for them.
*/
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb)
+void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
{
- urb_unlink(hcd, urb);
- usbmon_urb_complete (&hcd->self, urb);
+ urb->hcpriv = NULL;
+ if (unlikely(urb->unlinked))
+ status = urb->unlinked;
+ else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ urb->actual_length < urb->transfer_buffer_length &&
+ !status))
+ status = -EREMOTEIO;
+
+ unmap_urb_for_dma(hcd, urb);
+ usbmon_urb_complete(&hcd->self, urb, status);
usb_unanchor_urb(urb);
/* pass ownership to the completion handler */
+ urb->status = status;
urb->complete (urb);
atomic_dec (&urb->use_count);
if (unlikely (urb->reject))
/*-------------------------------------------------------------------------*/
-/* disables the endpoint: cancels any pending urbs, then synchronizes with
- * the hcd to make sure all endpoint state is gone from hardware, and then
- * waits until the endpoint's queue is completely drained. use for
- * set_configuration, set_interface, driver removal, physical disconnect.
- *
- * example: a qh stored in ep->hcpriv, holding state related to endpoint
- * type, maxpacket size, toggle, halt status, and scheduling.
+/* Cancel all URBs pending on this endpoint and wait for the endpoint's
+ * queue to drain completely. The caller must first insure that no more
+ * URBs can be submitted for this endpoint.
*/
-void usb_hcd_endpoint_disable (struct usb_device *udev,
+void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct usb_hcd *hcd;
struct urb *urb;
+ if (!ep)
+ return;
+ might_sleep();
hcd = bus_to_hcd(udev->bus);
- local_irq_disable ();
- /* ep is already gone from udev->ep_{in,out}[]; no more submits */
+ /* No more submits can occur */
rescan:
- spin_lock(&hcd_urb_list_lock);
+ spin_lock_irq(&hcd_urb_list_lock);
list_for_each_entry (urb, &ep->urb_list, urb_list) {
- int tmp;
+ int is_in;
- /* the urb may already have been unlinked */
- if (urb->status != -EINPROGRESS)
+ if (urb->unlinked)
continue;
usb_get_urb (urb);
+ is_in = usb_urb_dir_in(urb);
spin_unlock(&hcd_urb_list_lock);
- spin_lock (&urb->lock);
- tmp = urb->status;
- if (tmp == -EINPROGRESS)
- urb->status = -ESHUTDOWN;
- spin_unlock (&urb->lock);
-
- /* kick hcd unless it's already returning this */
- if (tmp == -EINPROGRESS) {
- tmp = urb->pipe;
- unlink1 (hcd, urb);
- dev_dbg (hcd->self.controller,
- "shutdown urb %p pipe %08x ep%d%s%s\n",
- urb, tmp, usb_pipeendpoint (tmp),
- (tmp & USB_DIR_IN) ? "in" : "out",
- ({ char *s; \
- switch (usb_pipetype (tmp)) { \
- case PIPE_CONTROL: s = ""; break; \
- case PIPE_BULK: s = "-bulk"; break; \
- case PIPE_INTERRUPT: s = "-intr"; break; \
- default: s = "-iso"; break; \
- }; s;}));
- }
+ /* kick hcd */
+ unlink1(hcd, urb, -ESHUTDOWN);
+ dev_dbg (hcd->self.controller,
+ "shutdown urb %p ep%d%s%s\n",
+ urb, usb_endpoint_num(&ep->desc),
+ is_in ? "in" : "out",
+ ({ char *s;
+
+ switch (usb_endpoint_type(&ep->desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ s = ""; break;
+ case USB_ENDPOINT_XFER_BULK:
+ s = "-bulk"; break;
+ case USB_ENDPOINT_XFER_INT:
+ s = "-intr"; break;
+ default:
+ s = "-iso"; break;
+ };
+ s;
+ }));
usb_put_urb (urb);
/* list contents may have changed */
goto rescan;
}
- spin_unlock(&hcd_urb_list_lock);
- local_irq_enable ();
-
- /* synchronize with the hardware, so old configuration state
- * clears out immediately (and will be freed).
- */
- might_sleep ();
- if (hcd->driver->endpoint_disable)
- hcd->driver->endpoint_disable (hcd, ep);
+ spin_unlock_irq(&hcd_urb_list_lock);
- /* Wait until the endpoint queue is completely empty. Most HCDs
- * will have done this already in their endpoint_disable method,
- * but some might not. And there could be root-hub control URBs
- * still pending since they aren't affected by the HCDs'
- * endpoint_disable methods.
- */
+ /* Wait until the endpoint queue is completely empty */
while (!list_empty (&ep->urb_list)) {
spin_lock_irq(&hcd_urb_list_lock);
}
}
+/* Disables the endpoint: synchronizes with the hcd to make sure all
+ * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
+ * have been called previously. Use for set_configuration, set_interface,
+ * driver removal, physical disconnect.
+ *
+ * example: a qh stored in ep->hcpriv, holding state related to endpoint
+ * type, maxpacket size, toggle, halt status, and scheduling.
+ */
+void usb_hcd_disable_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd;
+
+ might_sleep();
+ hcd = bus_to_hcd(udev->bus);
+ if (hcd->driver->endpoint_disable)
+ hcd->driver->endpoint_disable(hcd, ep);
+}
+
/*-------------------------------------------------------------------------*/
/* called in any context */
hcd->driver = driver;
hcd->product_desc = (driver->product_desc) ? driver->product_desc :
"USB Host Controller";
-
return hcd;
}
EXPORT_SYMBOL (usb_create_hcd);
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
+ hcd->authorized_default = hcd->wireless? 0 : 1;
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
/* HC is in reset state, but accessible. Now do the one-time init,
if ((retval = register_root_hub(hcd)) != 0)
goto err_register_root_hub;
+ retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+ if (retval < 0) {
+ printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
+ retval);
+ goto error_create_attr_group;
+ }
if (hcd->uses_new_polling && hcd->poll_rh)
usb_hcd_poll_rh_status(hcd);
return retval;
+error_create_attr_group:
+ mutex_lock(&usb_bus_list_lock);
+ usb_disconnect(&hcd->self.root_hub);
+ mutex_unlock(&usb_bus_list_lock);
err_register_root_hub:
hcd->driver->stop(hcd);
err_hcd_driver_start:
cancel_work_sync(&hcd->wakeup_work);
#endif
+ sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
mutex_unlock(&usb_bus_list_lock);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff