* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/config.h>
-
-#ifdef CONFIG_USB_DEBUG
-#define DEBUG
-#endif
-
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/utsname.h>
#include <linux/mm.h>
#include <asm/io.h>
-#include <asm/scatterlist.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/mutex.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
#include <linux/usb.h>
#include "hub.h"
-// #define USB_BANDWIDTH_MESSAGES
-
/*-------------------------------------------------------------------------*/
/*
/*-------------------------------------------------------------------------*/
+/* Keep track of which host controller drivers are loaded */
+unsigned long usb_hcds_loaded;
+EXPORT_SYMBOL_GPL(usb_hcds_loaded);
+
/* host controllers we manage */
LIST_HEAD (usb_bus_list);
EXPORT_SYMBOL_GPL (usb_bus_list);
static struct usb_busmap busmap;
/* used when updating list of hcds */
-DECLARE_MUTEX (usb_bus_list_lock); /* exported only for usbfs */
+DEFINE_MUTEX(usb_bus_list_lock); /* exported only for usbfs */
EXPORT_SYMBOL_GPL (usb_bus_list_lock);
/* used for controlling access to virtual root hubs */
static DEFINE_SPINLOCK(hcd_root_hub_lock);
-/* used when updating hcd data */
-static DEFINE_SPINLOCK(hcd_data_lock);
+/* used when updating an endpoint's URB list */
+static DEFINE_SPINLOCK(hcd_urb_list_lock);
+
+/* used to protect against unlinking URBs after the device is gone */
+static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
/* wait queue for synchronous unlinks */
DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
+static inline int is_root_hub(struct usb_device *udev)
+{
+ return (udev->parent == NULL);
+}
+
/*-------------------------------------------------------------------------*/
/*
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
- 0x01, /* __u8 bDeviceProtocol; [ usb 2.0 single TT ]*/
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
- 0x00, 0x00, /* __le16 idVendor; */
- 0x00, 0x00, /* __le16 idProduct; */
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x02, 0x00, /* __le16 idProduct; device 0x0002 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
- 0x00, 0x00, /* __le16 idVendor; */
- 0x00, 0x00, /* __le16 idProduct; */
+ 0x6b, 0x1d, /* __le16 idVendor; Linux Foundation */
+ 0x01, 0x00, /* __le16 idProduct; device 0x0001 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x05, /* __u8 ep_bDescriptorType; Endpoint */
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+ /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+ * see hub.c:hub_configure() for details. */
+ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
};
* rh_string - provides manufacturer, product and serial strings for root hub
* @id: the string ID number (1: serial number, 2: product, 3: vendor)
* @hcd: the host controller for this root hub
- * @type: string describing our driver
* @data: return packet in UTF-16 LE
* @len: length of the return packet
*
// id 3 == vendor description
} else if (id == 3) {
- snprintf (buf, sizeof buf, "%s %s %s", system_utsname.sysname,
- system_utsname.release, hcd->driver->description);
+ snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
+ init_utsname()->release, hcd->driver->description);
// unsupported IDs --> "protocol stall"
} else
struct usb_ctrlrequest *cmd;
u16 typeReq, wValue, wIndex, wLength;
u8 *ubuf = urb->transfer_buffer;
- u8 tbuf [sizeof (struct usb_hub_descriptor)];
+ u8 tbuf [sizeof (struct usb_hub_descriptor)]
+ __attribute__((aligned(4)));
const u8 *bufp = tbuf;
int len = 0;
- int patch_wakeup = 0;
- unsigned long flags;
- int status = 0;
+ int status;
int n;
+ u8 patch_wakeup = 0;
+ u8 patch_protocol = 0;
+
+ might_sleep();
+
+ spin_lock_irq(&hcd_root_hub_lock);
+ status = usb_hcd_link_urb_to_ep(hcd, urb);
+ spin_unlock_irq(&hcd_root_hub_lock);
+ if (status)
+ return status;
+ urb->hcpriv = hcd; /* Indicate it's queued */
cmd = (struct usb_ctrlrequest *) urb->setup_packet;
typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
/* DEVICE REQUESTS */
+ /* The root hub's remote wakeup enable bit is implemented using
+ * driver model wakeup flags. If this system supports wakeup
+ * through USB, userspace may change the default "allow wakeup"
+ * policy through sysfs or these calls.
+ *
+ * Most root hubs support wakeup from downstream devices, for
+ * runtime power management (disabling USB clocks and reducing
+ * VBUS power usage). However, not all of them do so; silicon,
+ * board, and BIOS bugs here are not uncommon, so these can't
+ * be treated quite like external hubs.
+ *
+ * Likewise, not all root hubs will pass wakeup events upstream,
+ * to wake up the whole system. So don't assume root hub and
+ * controller capabilities are identical.
+ */
+
case DeviceRequest | USB_REQ_GET_STATUS:
- tbuf [0] = (hcd->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP)
+ tbuf [0] = (device_may_wakeup(&hcd->self.root_hub->dev)
+ << USB_DEVICE_REMOTE_WAKEUP)
| (1 << USB_DEVICE_SELF_POWERED);
tbuf [1] = 0;
len = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (wValue == USB_DEVICE_REMOTE_WAKEUP)
- hcd->remote_wakeup = 0;
+ device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
else
goto error;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
- if (hcd->can_wakeup && wValue == USB_DEVICE_REMOTE_WAKEUP)
- hcd->remote_wakeup = 1;
+ if (device_can_wakeup(&hcd->self.root_hub->dev)
+ && wValue == USB_DEVICE_REMOTE_WAKEUP)
+ device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
else
goto error;
break;
else
goto error;
len = 18;
+ if (hcd->has_tt)
+ patch_protocol = 1;
break;
case USB_DT_CONFIG << 8:
if (hcd->driver->flags & HCD_USB2) {
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
}
- if (hcd->can_wakeup)
+ if (device_can_wakeup(&hcd->self.root_hub->dev))
patch_wakeup = 1;
break;
case USB_DT_STRING << 8:
default:
/* non-generic request */
- if (HC_IS_SUSPENDED (hcd->state))
- status = -EAGAIN;
- else {
- switch (typeReq) {
- case GetHubStatus:
- case GetPortStatus:
- len = 4;
- break;
- case GetHubDescriptor:
- len = sizeof (struct usb_hub_descriptor);
- break;
- }
- status = hcd->driver->hub_control (hcd,
- typeReq, wValue, wIndex,
- tbuf, wLength);
+ switch (typeReq) {
+ case GetHubStatus:
+ case GetPortStatus:
+ len = 4;
+ break;
+ case GetHubDescriptor:
+ len = sizeof (struct usb_hub_descriptor);
+ break;
}
+ status = hcd->driver->hub_control (hcd,
+ typeReq, wValue, wIndex,
+ tbuf, wLength);
break;
error:
/* "protocol stall" on error */
"CTRL: TypeReq=0x%x val=0x%x "
"idx=0x%x len=%d ==> %d\n",
typeReq, wValue, wIndex,
- wLength, urb->status);
+ wLength, status);
}
}
if (len) {
bmAttributes))
((struct usb_config_descriptor *)ubuf)->bmAttributes
|= USB_CONFIG_ATT_WAKEUP;
+
+ /* report whether RH hardware has an integrated TT */
+ if (patch_protocol &&
+ len > offsetof(struct usb_device_descriptor,
+ bDeviceProtocol))
+ ((struct usb_device_descriptor *) ubuf)->
+ bDeviceProtocol = 1;
}
/* any errors get returned through the urb completion */
- local_irq_save (flags);
- spin_lock (&urb->lock);
- if (urb->status == -EINPROGRESS)
- urb->status = status;
- spin_unlock (&urb->lock);
- usb_hcd_giveback_urb (hcd, urb, NULL);
- local_irq_restore (flags);
+ spin_lock_irq(&hcd_root_hub_lock);
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+
+ /* This peculiar use of spinlocks echoes what real HC drivers do.
+ * Avoiding calls to local_irq_disable/enable makes the code
+ * RT-friendly.
+ */
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&hcd_root_hub_lock);
+
+ spin_unlock_irq(&hcd_root_hub_lock);
return 0;
}
unsigned long flags;
char buffer[4]; /* Any root hubs with > 31 ports? */
+ if (unlikely(!hcd->rh_registered))
+ return;
if (!hcd->uses_new_polling && !hcd->status_urb)
return;
if (length > 0) {
/* try to complete the status urb */
- local_irq_save (flags);
- spin_lock(&hcd_root_hub_lock);
+ spin_lock_irqsave(&hcd_root_hub_lock, flags);
urb = hcd->status_urb;
if (urb) {
- spin_lock(&urb->lock);
- if (urb->status == -EINPROGRESS) {
- hcd->poll_pending = 0;
- hcd->status_urb = NULL;
- urb->status = 0;
- urb->hcpriv = NULL;
- urb->actual_length = length;
- memcpy(urb->transfer_buffer, buffer, length);
- } else /* urb has been unlinked */
- length = 0;
- spin_unlock(&urb->lock);
- } else
- length = 0;
- spin_unlock(&hcd_root_hub_lock);
+ hcd->poll_pending = 0;
+ hcd->status_urb = NULL;
+ urb->actual_length = length;
+ memcpy(urb->transfer_buffer, buffer, length);
- /* local irqs are always blocked in completions */
- if (length > 0)
- usb_hcd_giveback_urb (hcd, urb, NULL);
- else
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, 0);
+ spin_lock(&hcd_root_hub_lock);
+ } else {
+ length = 0;
hcd->poll_pending = 1;
- local_irq_restore (flags);
+ }
+ spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
}
/* The USB 2.0 spec says 256 ms. This is close enough and won't
- * exceed that limit if HZ is 100. */
+ * exceed that limit if HZ is 100. The math is more clunky than
+ * maybe expected, this is to make sure that all timers for USB devices
+ * fire at the same time to give the CPU a break inbetween */
if (hcd->uses_new_polling ? hcd->poll_rh :
(length == 0 && hcd->status_urb != NULL))
- mod_timer (&hcd->rh_timer, jiffies + msecs_to_jiffies(250));
+ mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
}
EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
int len = 1 + (urb->dev->maxchild / 8);
spin_lock_irqsave (&hcd_root_hub_lock, flags);
- if (urb->status != -EINPROGRESS) /* already unlinked */
- retval = urb->status;
- else if (hcd->status_urb || urb->transfer_buffer_length < len) {
+ if (hcd->status_urb || urb->transfer_buffer_length < len) {
dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
retval = -EINVAL;
- } else {
- hcd->status_urb = urb;
- urb->hcpriv = hcd; /* indicate it's queued */
+ goto done;
+ }
- if (!hcd->uses_new_polling)
- mod_timer (&hcd->rh_timer, jiffies +
- msecs_to_jiffies(250));
+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (retval)
+ goto done;
- /* If a status change has already occurred, report it ASAP */
- else if (hcd->poll_pending)
- mod_timer (&hcd->rh_timer, jiffies);
- retval = 0;
- }
+ hcd->status_urb = urb;
+ urb->hcpriv = hcd; /* indicate it's queued */
+ if (!hcd->uses_new_polling)
+ mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
+
+ /* If a status change has already occurred, report it ASAP */
+ else if (hcd->poll_pending)
+ mod_timer(&hcd->rh_timer, jiffies);
+ retval = 0;
+ done:
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
return retval;
}
static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
{
- if (usb_pipeint (urb->pipe))
+ if (usb_endpoint_xfer_int(&urb->ep->desc))
return rh_queue_status (hcd, urb);
- if (usb_pipecontrol (urb->pipe))
+ if (usb_endpoint_xfer_control(&urb->ep->desc))
return rh_call_control (hcd, urb);
return -EINVAL;
}
/*-------------------------------------------------------------------------*/
-/* Asynchronous unlinks of root-hub control URBs are legal, but they
- * don't do anything. Status URB unlinks must be made in process context
- * with interrupts enabled.
+/* Unlinks of root-hub control URBs are legal, but they don't do anything
+ * since these URBs always execute synchronously.
*/
-static int usb_rh_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
- if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */
- if (in_interrupt())
- return 0; /* nothing to do */
-
- spin_lock_irq(&urb->lock); /* from usb_kill_urb */
- ++urb->reject;
- spin_unlock_irq(&urb->lock);
+ unsigned long flags;
+ int rc;
- wait_event(usb_kill_urb_queue,
- atomic_read(&urb->use_count) == 0);
+ spin_lock_irqsave(&hcd_root_hub_lock, flags);
+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (rc)
+ goto done;
- spin_lock_irq(&urb->lock);
- --urb->reject;
- spin_unlock_irq(&urb->lock);
+ if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
+ ; /* Do nothing */
} else { /* Status URB */
if (!hcd->uses_new_polling)
- del_timer_sync (&hcd->rh_timer);
- local_irq_disable ();
- spin_lock (&hcd_root_hub_lock);
+ del_timer (&hcd->rh_timer);
if (urb == hcd->status_urb) {
hcd->status_urb = NULL;
- urb->hcpriv = NULL;
- } else
- urb = NULL; /* wasn't fully queued */
- spin_unlock (&hcd_root_hub_lock);
- if (urb)
- usb_hcd_giveback_urb (hcd, urb, NULL);
- local_irq_enable ();
- }
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
- return 0;
+ spin_unlock(&hcd_root_hub_lock);
+ usb_hcd_giveback_urb(hcd, urb, status);
+ spin_lock(&hcd_root_hub_lock);
+ }
+ }
+ done:
+ spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
+ return rc;
}
-/*-------------------------------------------------------------------------*/
-/* exported only within usbcore */
-struct usb_bus *usb_bus_get(struct usb_bus *bus)
-{
- if (bus)
- kref_get(&bus->kref);
- return bus;
-}
-static void usb_host_release(struct kref *kref)
+/*
+ * Show & store the current value of authorized_default
+ */
+static ssize_t usb_host_authorized_default_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
- struct usb_bus *bus = container_of(kref, struct usb_bus, kref);
+ struct usb_device *rh_usb_dev = to_usb_device(dev);
+ struct usb_bus *usb_bus = rh_usb_dev->bus;
+ struct usb_hcd *usb_hcd;
- if (bus->release)
- bus->release(bus);
+ if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
+ return -ENODEV;
+ usb_hcd = bus_to_hcd(usb_bus);
+ return snprintf(buf, PAGE_SIZE, "%u\n", usb_hcd->authorized_default);
}
-/* exported only within usbcore */
-void usb_bus_put(struct usb_bus *bus)
+static ssize_t usb_host_authorized_default_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
{
- if (bus)
- kref_put(&bus->kref, usb_host_release);
+ ssize_t result;
+ unsigned val;
+ struct usb_device *rh_usb_dev = to_usb_device(dev);
+ struct usb_bus *usb_bus = rh_usb_dev->bus;
+ struct usb_hcd *usb_hcd;
+
+ if (usb_bus == NULL) /* FIXME: not sure if this case is possible */
+ return -ENODEV;
+ usb_hcd = bus_to_hcd(usb_bus);
+ result = sscanf(buf, "%u\n", &val);
+ if (result == 1) {
+ usb_hcd->authorized_default = val? 1 : 0;
+ result = size;
+ }
+ else
+ result = -EINVAL;
+ return result;
}
+static DEVICE_ATTR(authorized_default, 0644,
+ usb_host_authorized_default_show,
+ usb_host_authorized_default_store);
+
+
+/* Group all the USB bus attributes */
+static struct attribute *usb_bus_attrs[] = {
+ &dev_attr_authorized_default.attr,
+ NULL,
+};
+
+static struct attribute_group usb_bus_attr_group = {
+ .name = NULL, /* we want them in the same directory */
+ .attrs = usb_bus_attrs,
+};
+
+
+
/*-------------------------------------------------------------------------*/
static struct class *usb_host_class;
bus->devnum_next = 1;
bus->root_hub = NULL;
- bus->hcpriv = NULL;
bus->busnum = -1;
bus->bandwidth_allocated = 0;
bus->bandwidth_int_reqs = 0;
bus->bandwidth_isoc_reqs = 0;
INIT_LIST_HEAD (&bus->bus_list);
-
- kref_init(&bus->kref);
-}
-
-/**
- * usb_alloc_bus - creates a new USB host controller structure
- * @op: pointer to a struct usb_operations that this bus structure should use
- * Context: !in_interrupt()
- *
- * Creates a USB host controller bus structure with the specified
- * usb_operations and initializes all the necessary internal objects.
- *
- * If no memory is available, NULL is returned.
- *
- * The caller should call usb_put_bus() when it is finished with the structure.
- */
-struct usb_bus *usb_alloc_bus (struct usb_operations *op)
-{
- struct usb_bus *bus;
-
- bus = kmalloc (sizeof *bus, GFP_KERNEL);
- if (!bus)
- return NULL;
- memset(bus, 0, sizeof(struct usb_bus));
- usb_bus_init (bus);
- bus->op = op;
- return bus;
}
/*-------------------------------------------------------------------------*/
*/
static int usb_register_bus(struct usb_bus *bus)
{
+ int result = -E2BIG;
int busnum;
- down (&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
busnum = find_next_zero_bit (busmap.busmap, USB_MAXBUS, 1);
- if (busnum < USB_MAXBUS) {
- set_bit (busnum, busmap.busmap);
- bus->busnum = busnum;
- } else {
+ if (busnum >= USB_MAXBUS) {
printk (KERN_ERR "%s: too many buses\n", usbcore_name);
- up(&usb_bus_list_lock);
- return -E2BIG;
- }
-
- bus->class_dev = class_device_create(usb_host_class, NULL, MKDEV(0,0),
- bus->controller, "usb_host%d", busnum);
- if (IS_ERR(bus->class_dev)) {
- clear_bit(busnum, busmap.busmap);
- up(&usb_bus_list_lock);
- return PTR_ERR(bus->class_dev);
+ goto error_find_busnum;
}
+ set_bit (busnum, busmap.busmap);
+ bus->busnum = busnum;
- class_set_devdata(bus->class_dev, bus);
+ bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
+ bus, "usb_host%d", busnum);
+ result = PTR_ERR(bus->dev);
+ if (IS_ERR(bus->dev))
+ goto error_create_class_dev;
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
- usbfs_add_bus (bus);
- usbmon_notify_bus_add (bus);
+ usb_notify_add_bus(bus);
- dev_info (bus->controller, "new USB bus registered, assigned bus number %d\n", bus->busnum);
+ dev_info (bus->controller, "new USB bus registered, assigned bus "
+ "number %d\n", bus->busnum);
return 0;
+
+error_create_class_dev:
+ clear_bit(busnum, busmap.busmap);
+error_find_busnum:
+ mutex_unlock(&usb_bus_list_lock);
+ return result;
}
/**
* controller code, as well as having it call this when cleaning
* itself up
*/
- down (&usb_bus_list_lock);
+ mutex_lock(&usb_bus_list_lock);
list_del (&bus->bus_list);
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
- usbmon_notify_bus_remove (bus);
- usbfs_remove_bus (bus);
+ usb_notify_remove_bus(bus);
clear_bit (bus->busnum, busmap.busmap);
- class_device_unregister(bus->class_dev);
+ device_unregister(bus->dev);
}
/**
* register_root_hub - called by usb_add_hcd() to register a root hub
- * @usb_dev: the usb root hub device to be registered.
* @hcd: host controller for this root hub
*
* This function registers the root hub with the USB subsystem. It sets up
- * the device properly in the device tree and stores the root_hub pointer
- * in the bus structure, then calls usb_new_device() to register the usb
- * device. It also assigns the root hub's USB address (always 1).
+ * the device properly in the device tree and then calls usb_new_device()
+ * to register the usb device. It also assigns the root hub's USB address
+ * (always 1).
*/
-static int register_root_hub (struct usb_device *usb_dev,
- struct usb_hcd *hcd)
+static int register_root_hub(struct usb_hcd *hcd)
{
struct device *parent_dev = hcd->self.controller;
+ struct usb_device *usb_dev = hcd->self.root_hub;
const int devnum = 1;
int retval;
set_bit (devnum, usb_dev->bus->devmap.devicemap);
usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
- down (&usb_bus_list_lock);
- usb_dev->bus->root_hub = usb_dev;
+ mutex_lock(&usb_bus_list_lock);
- usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+ usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
if (retval != sizeof usb_dev->descriptor) {
- usb_dev->bus->root_hub = NULL;
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
- usb_dev->dev.bus_id, retval);
+ dev_name(&usb_dev->dev), retval);
return (retval < 0) ? retval : -EMSGSIZE;
}
- usb_lock_device (usb_dev);
retval = usb_new_device (usb_dev);
- usb_unlock_device (usb_dev);
if (retval) {
- usb_dev->bus->root_hub = NULL;
dev_err (parent_dev, "can't register root hub for %s, %d\n",
- usb_dev->dev.bus_id, retval);
+ dev_name(&usb_dev->dev), retval);
}
- up (&usb_bus_list_lock);
+ mutex_unlock(&usb_bus_list_lock);
if (retval == 0) {
spin_lock_irq (&hcd_root_hub_lock);
return retval;
}
-void usb_enable_root_hub_irq (struct usb_bus *bus)
-{
- struct usb_hcd *hcd;
-
- hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_irq_enable && !hcd->poll_rh &&
- hcd->state != HC_STATE_HALT)
- hcd->driver->hub_irq_enable (hcd);
-}
-
/*-------------------------------------------------------------------------*/
return -1;
}
}
-EXPORT_SYMBOL (usb_calc_bus_time);
+EXPORT_SYMBOL_GPL(usb_calc_bus_time);
+
+
+/*-------------------------------------------------------------------------*/
/*
- * usb_check_bandwidth():
- *
- * old_alloc is from host_controller->bandwidth_allocated in microseconds;
- * bustime is from calc_bus_time(), but converted to microseconds.
- *
- * returns <bustime in us> if successful,
- * or -ENOSPC if bandwidth request fails.
- *
- * FIXME:
- * This initial implementation does not use Endpoint.bInterval
- * in managing bandwidth allocation.
- * It probably needs to be expanded to use Endpoint.bInterval.
- * This can be done as a later enhancement (correction).
- *
- * This will also probably require some kind of
- * frame allocation tracking...meaning, for example,
- * that if multiple drivers request interrupts every 10 USB frames,
- * they don't all have to be allocated at
- * frame numbers N, N+10, N+20, etc. Some of them could be at
- * N+11, N+21, N+31, etc., and others at
- * N+12, N+22, N+32, etc.
+ * Generic HC operations.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being submitted
*
- * Similarly for isochronous transfers...
+ * Host controller drivers should call this routine in their enqueue()
+ * method. The HCD's private spinlock must be held and interrupts must
+ * be disabled. The actions carried out here are required for URB
+ * submission, as well as for endpoint shutdown and for usb_kill_urb.
*
- * Individual HCDs can schedule more directly ... this logic
- * is not correct for high speed transfers.
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the enqueue() method must fail). If no error occurs but enqueue() fails
+ * anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
+ * the private spinlock and returning.
*/
-int usb_check_bandwidth (struct usb_device *dev, struct urb *urb)
+int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
{
- unsigned int pipe = urb->pipe;
- long bustime;
- int is_in = usb_pipein (pipe);
- int is_iso = usb_pipeisoc (pipe);
- int old_alloc = dev->bus->bandwidth_allocated;
- int new_alloc;
-
-
- bustime = NS_TO_US (usb_calc_bus_time (dev->speed, is_in, is_iso,
- usb_maxpacket (dev, pipe, !is_in)));
- if (is_iso)
- bustime /= urb->number_of_packets;
-
- new_alloc = old_alloc + (int) bustime;
- if (new_alloc > FRAME_TIME_MAX_USECS_ALLOC) {
-#ifdef DEBUG
- char *mode =
-#ifdef CONFIG_USB_BANDWIDTH
- "";
-#else
- "would have ";
-#endif
- dev_dbg (&dev->dev, "usb_check_bandwidth %sFAILED: %d + %ld = %d usec\n",
- mode, old_alloc, bustime, new_alloc);
-#endif
-#ifdef CONFIG_USB_BANDWIDTH
- bustime = -ENOSPC; /* report error */
-#endif
+ int rc = 0;
+
+ spin_lock(&hcd_urb_list_lock);
+
+ /* Check that the URB isn't being killed */
+ if (unlikely(atomic_read(&urb->reject))) {
+ rc = -EPERM;
+ goto done;
}
- return bustime;
-}
-EXPORT_SYMBOL (usb_check_bandwidth);
+ if (unlikely(!urb->ep->enabled)) {
+ rc = -ENOENT;
+ goto done;
+ }
+ if (unlikely(!urb->dev->can_submit)) {
+ rc = -EHOSTUNREACH;
+ goto done;
+ }
+
+ /*
+ * Check the host controller's state and add the URB to the
+ * endpoint's queue.
+ */
+ switch (hcd->state) {
+ case HC_STATE_RUNNING:
+ case HC_STATE_RESUMING:
+ urb->unlinked = 0;
+ list_add_tail(&urb->urb_list, &urb->ep->urb_list);
+ break;
+ default:
+ rc = -ESHUTDOWN;
+ goto done;
+ }
+ done:
+ spin_unlock(&hcd_urb_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
/**
- * usb_claim_bandwidth - records bandwidth for a periodic transfer
- * @dev: source/target of request
- * @urb: request (urb->dev == dev)
- * @bustime: bandwidth consumed, in (average) microseconds per frame
- * @isoc: true iff the request is isochronous
+ * usb_hcd_check_unlink_urb - check whether an URB may be unlinked
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being checked for unlinkability
+ * @status: error code to store in @urb if the unlink succeeds
+ *
+ * Host controller drivers should call this routine in their dequeue()
+ * method. The HCD's private spinlock must be held and interrupts must
+ * be disabled. The actions carried out here are required for making
+ * sure than an unlink is valid.
*
- * Bus bandwidth reservations are recorded purely for diagnostic purposes.
- * HCDs are expected not to overcommit periodic bandwidth, and to record such
- * reservations whenever endpoints are added to the periodic schedule.
+ * Returns 0 for no error, otherwise a negative error code (in which case
+ * the dequeue() method must fail). The possible error codes are:
*
- * FIXME averaging per-frame is suboptimal. Better to sum over the HCD's
- * entire periodic schedule ... 32 frames for OHCI, 1024 for UHCI, settable
- * for EHCI (256/512/1024 frames, default 1024) and have the bus expose how
- * large its periodic schedule is.
+ * -EIDRM: @urb was not submitted or has already completed.
+ * The completion function may not have been called yet.
+ *
+ * -EBUSY: @urb has already been unlinked.
*/
-void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb, int bustime, int isoc)
+int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status)
{
- dev->bus->bandwidth_allocated += bustime;
- if (isoc)
- dev->bus->bandwidth_isoc_reqs++;
- else
- dev->bus->bandwidth_int_reqs++;
- urb->bandwidth = bustime;
-
-#ifdef USB_BANDWIDTH_MESSAGES
- dev_dbg (&dev->dev, "bandwidth alloc increased by %d (%s) to %d for %d requesters\n",
- bustime,
- isoc ? "ISOC" : "INTR",
- dev->bus->bandwidth_allocated,
- dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
-#endif
-}
-EXPORT_SYMBOL (usb_claim_bandwidth);
+ struct list_head *tmp;
+
+ /* insist the urb is still queued */
+ list_for_each(tmp, &urb->ep->urb_list) {
+ if (tmp == &urb->urb_list)
+ break;
+ }
+ if (tmp != &urb->urb_list)
+ return -EIDRM;
+
+ /* Any status except -EINPROGRESS means something already started to
+ * unlink this URB from the hardware. So there's no more work to do.
+ */
+ if (urb->unlinked)
+ return -EBUSY;
+ urb->unlinked = status;
+ /* IRQ setup can easily be broken so that USB controllers
+ * never get completion IRQs ... maybe even the ones we need to
+ * finish unlinking the initial failed usb_set_address()
+ * or device descriptor fetch.
+ */
+ if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) &&
+ !is_root_hub(urb->dev)) {
+ dev_warn(hcd->self.controller, "Unlink after no-IRQ? "
+ "Controller is probably using the wrong IRQ.\n");
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
/**
- * usb_release_bandwidth - reverses effect of usb_claim_bandwidth()
- * @dev: source/target of request
- * @urb: request (urb->dev == dev)
- * @isoc: true iff the request is isochronous
+ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
+ * @hcd: host controller to which @urb was submitted
+ * @urb: URB being unlinked
*
- * This records that previously allocated bandwidth has been released.
- * Bandwidth is released when endpoints are removed from the host controller's
- * periodic schedule.
+ * Host controller drivers should call this routine before calling
+ * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
+ * interrupts must be disabled. The actions carried out here are required
+ * for URB completion.
*/
-void usb_release_bandwidth (struct usb_device *dev, struct urb *urb, int isoc)
+void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
{
- dev->bus->bandwidth_allocated -= urb->bandwidth;
- if (isoc)
- dev->bus->bandwidth_isoc_reqs--;
- else
- dev->bus->bandwidth_int_reqs--;
-
-#ifdef USB_BANDWIDTH_MESSAGES
- dev_dbg (&dev->dev, "bandwidth alloc reduced by %d (%s) to %d for %d requesters\n",
- urb->bandwidth,
- isoc ? "ISOC" : "INTR",
- dev->bus->bandwidth_allocated,
- dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
-#endif
- urb->bandwidth = 0;
+ /* clear all state linking urb to this dev (and hcd) */
+ spin_lock(&hcd_urb_list_lock);
+ list_del_init(&urb->urb_list);
+ spin_unlock(&hcd_urb_list_lock);
}
-EXPORT_SYMBOL (usb_release_bandwidth);
-
-
-/*-------------------------------------------------------------------------*/
+EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
/*
- * Generic HC operations.
+ * Some usb host controllers can only perform dma using a small SRAM area.
+ * The usb core itself is however optimized for host controllers that can dma
+ * using regular system memory - like pci devices doing bus mastering.
+ *
+ * To support host controllers with limited dma capabilites we provide dma
+ * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
+ * For this to work properly the host controller code must first use the
+ * function dma_declare_coherent_memory() to point out which memory area
+ * that should be used for dma allocations.
+ *
+ * The HCD_LOCAL_MEM flag then tells the usb code to allocate all data for
+ * dma using dma_alloc_coherent() which in turn allocates from the memory
+ * area pointed out with dma_declare_coherent_memory().
+ *
+ * So, to summarize...
+ *
+ * - We need "local" memory, canonical example being
+ * a small SRAM on a discrete controller being the
+ * only memory that the controller can read ...
+ * (a) "normal" kernel memory is no good, and
+ * (b) there's not enough to share
+ *
+ * - The only *portable* hook for such stuff in the
+ * DMA framework is dma_declare_coherent_memory()
+ *
+ * - So we use that, even though the primary requirement
+ * is that the memory be "local" (hence addressible
+ * by that device), not "coherent".
+ *
*/
-/*-------------------------------------------------------------------------*/
-
-static void urb_unlink (struct urb *urb)
+static int hcd_alloc_coherent(struct usb_bus *bus,
+ gfp_t mem_flags, dma_addr_t *dma_handle,
+ void **vaddr_handle, size_t size,
+ enum dma_data_direction dir)
{
- unsigned long flags;
+ unsigned char *vaddr;
- /* Release any periodic transfer bandwidth */
- if (urb->bandwidth)
- usb_release_bandwidth (urb->dev, urb,
- usb_pipeisoc (urb->pipe));
+ vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
+ mem_flags, dma_handle);
+ if (!vaddr)
+ return -ENOMEM;
- /* clear all state linking urb to this dev (and hcd) */
+ /*
+ * Store the virtual address of the buffer at the end
+ * of the allocated dma buffer. The size of the buffer
+ * may be uneven so use unaligned functions instead
+ * of just rounding up. It makes sense to optimize for
+ * memory footprint over access speed since the amount
+ * of memory available for dma may be limited.
+ */
+ put_unaligned((unsigned long)*vaddr_handle,
+ (unsigned long *)(vaddr + size));
- spin_lock_irqsave (&hcd_data_lock, flags);
- list_del_init (&urb->urb_list);
- spin_unlock_irqrestore (&hcd_data_lock, flags);
- usb_put_dev (urb->dev);
-}
+ if (dir == DMA_TO_DEVICE)
+ memcpy(vaddr, *vaddr_handle, size);
+ *vaddr_handle = vaddr;
+ return 0;
+}
-/* may be called in any context with a valid urb->dev usecount
- * caller surrenders "ownership" of urb
- * expects usb_submit_urb() to have sanity checked and conditioned all
- * inputs in the urb
- */
-static int hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
+static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
+ void **vaddr_handle, size_t size,
+ enum dma_data_direction dir)
{
- int status;
- struct usb_hcd *hcd = urb->dev->bus->hcpriv;
- struct usb_host_endpoint *ep;
- unsigned long flags;
+ unsigned char *vaddr = *vaddr_handle;
- if (!hcd)
- return -ENODEV;
+ vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
- usbmon_urb_submit(&hcd->self, urb);
-
- /*
- * Atomically queue the urb, first to our records, then to the HCD.
- * Access to urb->status is controlled by urb->lock ... changes on
- * i/o completion (normal or fault) or unlinking.
- */
+ if (dir == DMA_FROM_DEVICE)
+ memcpy(vaddr, *vaddr_handle, size);
- // FIXME: verify that quiescing hc works right (RH cleans up)
+ hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
- spin_lock_irqsave (&hcd_data_lock, flags);
- ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (unlikely (!ep))
- status = -ENOENT;
- else if (unlikely (urb->reject))
- status = -EPERM;
- else switch (hcd->state) {
- case HC_STATE_RUNNING:
- case HC_STATE_RESUMING:
- usb_get_dev (urb->dev);
- list_add_tail (&urb->urb_list, &ep->urb_list);
- status = 0;
- break;
- default:
- status = -ESHUTDOWN;
- break;
- }
- spin_unlock_irqrestore (&hcd_data_lock, flags);
- if (status) {
- INIT_LIST_HEAD (&urb->urb_list);
- usbmon_urb_submit_error(&hcd->self, urb, status);
- return status;
- }
+ *vaddr_handle = vaddr;
+ *dma_handle = 0;
+}
- /* increment urb's reference count as part of giving it to the HCD
- * (which now controls it). HCD guarantees that it either returns
- * an error or calls giveback(), but not both.
- */
- urb = usb_get_urb (urb);
- atomic_inc (&urb->use_count);
-
- if (urb->dev == hcd->self.root_hub) {
- /* NOTE: requirement on hub callers (usbfs and the hub
- * driver, for now) that URBs' urb->transfer_buffer be
- * valid and usb_buffer_{sync,unmap}() not be needed, since
- * they could clobber root hub response data.
- */
- status = rh_urb_enqueue (hcd, urb);
- goto done;
- }
+static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ enum dma_data_direction dir;
+ int ret = 0;
- /* lower level hcd code should use *_dma exclusively,
+ /* Map the URB's buffers for DMA access.
+ * Lower level HCD code should use *_dma exclusively,
* unless it uses pio or talks to another transport.
*/
- if (hcd->self.controller->dma_mask) {
- if (usb_pipecontrol (urb->pipe)
- && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
- urb->setup_dma = dma_map_single (
+ if (is_root_hub(urb->dev))
+ return 0;
+
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
+ if (hcd->self.uses_dma)
+ urb->setup_dma = dma_map_single(
hcd->self.controller,
urb->setup_packet,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ else if (hcd->driver->flags & HCD_LOCAL_MEM)
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ }
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ if (ret == 0 && urb->transfer_buffer_length != 0
+ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+ if (hcd->self.uses_dma)
urb->transfer_dma = dma_map_single (
hcd->self.controller,
urb->transfer_buffer,
urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
- ? DMA_FROM_DEVICE
- : DMA_TO_DEVICE);
+ dir);
+ else if (hcd->driver->flags & HCD_LOCAL_MEM) {
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->transfer_dma,
+ &urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ dir);
+
+ if (ret && usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+ hcd_free_coherent(urb->dev->bus,
+ &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ }
}
+ return ret;
+}
- status = hcd->driver->urb_enqueue (hcd, ep, urb, mem_flags);
-done:
- if (unlikely (status)) {
- urb_unlink (urb);
- atomic_dec (&urb->use_count);
- if (urb->reject)
- wake_up (&usb_kill_urb_queue);
- usb_put_urb (urb);
- usbmon_urb_submit_error(&hcd->self, urb, status);
+static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+ enum dma_data_direction dir;
+
+ if (is_root_hub(urb->dev))
+ return;
+
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
+ && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
+ if (hcd->self.uses_dma)
+ dma_unmap_single(hcd->self.controller, urb->setup_dma,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ else if (hcd->driver->flags & HCD_LOCAL_MEM)
+ hcd_free_coherent(urb->dev->bus, &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ }
+
+ dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ if (urb->transfer_buffer_length != 0
+ && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
+ if (hcd->self.uses_dma)
+ dma_unmap_single(hcd->self.controller,
+ urb->transfer_dma,
+ urb->transfer_buffer_length,
+ dir);
+ else if (hcd->driver->flags & HCD_LOCAL_MEM)
+ hcd_free_coherent(urb->dev->bus, &urb->transfer_dma,
+ &urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ dir);
}
- return status;
}
/*-------------------------------------------------------------------------*/
-/* called in any context */
-static int hcd_get_frame_number (struct usb_device *udev)
+/* may be called in any context with a valid urb->dev usecount
+ * caller surrenders "ownership" of urb
+ * expects usb_submit_urb() to have sanity checked and conditioned all
+ * inputs in the urb
+ */
+int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
{
- struct usb_hcd *hcd = (struct usb_hcd *)udev->bus->hcpriv;
- if (!HC_IS_RUNNING (hcd->state))
- return -ESHUTDOWN;
- return hcd->driver->get_frame_number (hcd);
+ int status;
+ struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
+
+ /* increment urb's reference count as part of giving it to the HCD
+ * (which will control it). HCD guarantees that it either returns
+ * an error or calls giveback(), but not both.
+ */
+ usb_get_urb(urb);
+ atomic_inc(&urb->use_count);
+ atomic_inc(&urb->dev->urbnum);
+ usbmon_urb_submit(&hcd->self, urb);
+
+ /* NOTE requirements on root-hub callers (usbfs and the hub
+ * driver, for now): URBs' urb->transfer_buffer must be
+ * valid and usb_buffer_{sync,unmap}() not be needed, since
+ * they could clobber root hub response data. Also, control
+ * URBs must be submitted in process context with interrupts
+ * enabled.
+ */
+ status = map_urb_for_dma(hcd, urb, mem_flags);
+ if (unlikely(status)) {
+ usbmon_urb_submit_error(&hcd->self, urb, status);
+ goto error;
+ }
+
+ if (is_root_hub(urb->dev))
+ status = rh_urb_enqueue(hcd, urb);
+ else
+ status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
+
+ if (unlikely(status)) {
+ usbmon_urb_submit_error(&hcd->self, urb, status);
+ unmap_urb_for_dma(hcd, urb);
+ error:
+ urb->hcpriv = NULL;
+ INIT_LIST_HEAD(&urb->urb_list);
+ atomic_dec(&urb->use_count);
+ atomic_dec(&urb->dev->urbnum);
+ if (atomic_read(&urb->reject))
+ wake_up(&usb_kill_urb_queue);
+ usb_put_urb(urb);
+ }
+ return status;
}
/*-------------------------------------------------------------------------*/
* soon as practical. we've already set up the urb's return status,
* but we can't know if the callback completed already.
*/
-static int
-unlink1 (struct usb_hcd *hcd, struct urb *urb)
+static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
{
int value;
- if (urb->dev == hcd->self.root_hub)
- value = usb_rh_urb_dequeue (hcd, urb);
+ if (is_root_hub(urb->dev))
+ value = usb_rh_urb_dequeue(hcd, urb, status);
else {
/* The only reason an HCD might fail this call is if
* it has not yet fully queued the urb to begin with.
* Such failures should be harmless. */
- value = hcd->driver->urb_dequeue (hcd, urb);
+ value = hcd->driver->urb_dequeue(hcd, urb, status);
}
-
- if (value != 0)
- dev_dbg (hcd->self.controller, "dequeue %p --> %d\n",
- urb, value);
return value;
}
* caller guarantees urb won't be recycled till both unlink()
* and the urb's completion function return
*/
-static int hcd_unlink_urb (struct urb *urb, int status)
+int usb_hcd_unlink_urb (struct urb *urb, int status)
{
- struct usb_host_endpoint *ep;
- struct usb_hcd *hcd = NULL;
- struct device *sys = NULL;
- unsigned long flags;
- struct list_head *tmp;
- int retval;
-
- if (!urb)
- return -EINVAL;
- if (!urb->dev || !urb->dev->bus)
- return -ENODEV;
- ep = (usb_pipein(urb->pipe) ? urb->dev->ep_in : urb->dev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (!ep)
- return -ENODEV;
-
- /*
- * we contend for urb->status with the hcd core,
- * which changes it while returning the urb.
- *
- * Caller guaranteed that the urb pointer hasn't been freed, and
- * that it was submitted. But as a rule it can't know whether or
- * not it's already been unlinked ... so we respect the reversed
- * lock sequence needed for the usb_hcd_giveback_urb() code paths
- * (urb lock, then hcd_data_lock) in case some other CPU is now
- * unlinking it.
- */
- spin_lock_irqsave (&urb->lock, flags);
- spin_lock (&hcd_data_lock);
-
- sys = &urb->dev->dev;
- hcd = urb->dev->bus->hcpriv;
- if (hcd == NULL) {
- retval = -ENODEV;
- goto done;
- }
-
- /* running ~= hc unlink handshake works (irq, timer, etc)
- * halted ~= no unlink handshake is needed
- * suspended, resuming == should never happen
- */
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT);
-
- /* insist the urb is still queued */
- list_for_each(tmp, &ep->urb_list) {
- if (tmp == &urb->urb_list)
- break;
- }
- if (tmp != &urb->urb_list) {
- retval = -EIDRM;
- goto done;
- }
+ struct usb_hcd *hcd;
+ int retval = -EIDRM;
+ unsigned long flags;
- /* Any status except -EINPROGRESS means something already started to
- * unlink this URB from the hardware. So there's no more work to do.
+ /* Prevent the device and bus from going away while
+ * the unlink is carried out. If they are already gone
+ * then urb->use_count must be 0, since disconnected
+ * devices can't have any active URBs.
*/
- if (urb->status != -EINPROGRESS) {
- retval = -EBUSY;
- goto done;
+ spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
+ if (atomic_read(&urb->use_count) > 0) {
+ retval = 0;
+ usb_get_dev(urb->dev);
}
-
- /* IRQ setup can easily be broken so that USB controllers
- * never get completion IRQs ... maybe even the ones we need to
- * finish unlinking the initial failed usb_set_address()
- * or device descriptor fetch.
- */
- if (!hcd->saw_irq && hcd->self.root_hub != urb->dev) {
- dev_warn (hcd->self.controller, "Unlink after no-IRQ? "
- "Controller is probably using the wrong IRQ."
- "\n");
- hcd->saw_irq = 1;
+ spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
+ if (retval == 0) {
+ hcd = bus_to_hcd(urb->dev->bus);
+ retval = unlink1(hcd, urb, status);
+ usb_put_dev(urb->dev);
}
- urb->status = status;
-
- spin_unlock (&hcd_data_lock);
- spin_unlock_irqrestore (&urb->lock, flags);
-
- retval = unlink1 (hcd, urb);
if (retval == 0)
retval = -EINPROGRESS;
- return retval;
-
-done:
- spin_unlock (&hcd_data_lock);
- spin_unlock_irqrestore (&urb->lock, flags);
- if (retval != -EIDRM && sys && sys->driver)
- dev_dbg (sys, "hcd_unlink_urb %p fail %d\n", urb, retval);
+ else if (retval != -EIDRM && retval != -EBUSY)
+ dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
+ urb, retval);
return retval;
}
/*-------------------------------------------------------------------------*/
-/* disables the endpoint: cancels any pending urbs, then synchronizes with
- * the hcd to make sure all endpoint state is gone from hardware. use for
- * set_configuration, set_interface, driver removal, physical disconnect.
+/**
+ * usb_hcd_giveback_urb - return URB from HCD to device driver
+ * @hcd: host controller returning the URB
+ * @urb: urb being returned to the USB device driver.
+ * @status: completion status code for the URB.
+ * Context: in_interrupt()
*
- * example: a qh stored in ep->hcpriv, holding state related to endpoint
- * type, maxpacket size, toggle, halt status, and scheduling.
+ * This hands the URB from HCD to its USB device driver, using its
+ * completion function. The HCD has freed all per-urb resources
+ * (and is done using urb->hcpriv). It also released all HCD locks;
+ * the device driver won't cause problems if it frees, modifies,
+ * or resubmits this URB.
+ *
+ * If @urb was unlinked, the value of @status will be overridden by
+ * @urb->unlinked. Erroneous short transfers are detected in case
+ * the HCD hasn't checked for them.
*/
-static void
-hcd_endpoint_disable (struct usb_device *udev, struct usb_host_endpoint *ep)
+void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
{
- struct usb_hcd *hcd;
- struct urb *urb;
+ urb->hcpriv = NULL;
+ if (unlikely(urb->unlinked))
+ status = urb->unlinked;
+ else if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
+ urb->actual_length < urb->transfer_buffer_length &&
+ !status))
+ status = -EREMOTEIO;
+
+ unmap_urb_for_dma(hcd, urb);
+ usbmon_urb_complete(&hcd->self, urb, status);
+ usb_unanchor_urb(urb);
- hcd = udev->bus->hcpriv;
+ /* pass ownership to the completion handler */
+ urb->status = status;
+ urb->complete (urb);
+ atomic_dec (&urb->use_count);
+ if (unlikely(atomic_read(&urb->reject)))
+ wake_up (&usb_kill_urb_queue);
+ usb_put_urb (urb);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
- WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT &&
- udev->state != USB_STATE_NOTATTACHED);
+/*-------------------------------------------------------------------------*/
- local_irq_disable ();
+/* Cancel all URBs pending on this endpoint and wait for the endpoint's
+ * queue to drain completely. The caller must first insure that no more
+ * URBs can be submitted for this endpoint.
+ */
+void usb_hcd_flush_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd;
+ struct urb *urb;
- /* FIXME move most of this into message.c as part of its
- * endpoint disable logic
- */
+ if (!ep)
+ return;
+ might_sleep();
+ hcd = bus_to_hcd(udev->bus);
- /* ep is already gone from udev->ep_{in,out}[]; no more submits */
+ /* No more submits can occur */
+ spin_lock_irq(&hcd_urb_list_lock);
rescan:
- spin_lock (&hcd_data_lock);
list_for_each_entry (urb, &ep->urb_list, urb_list) {
- int tmp;
+ int is_in;
- /* another cpu may be in hcd, spinning on hcd_data_lock
- * to giveback() this urb. the races here should be
- * small, but a full fix needs a new "can't submit"
- * urb state.
- * FIXME urb->reject should allow that...
- */
- if (urb->status != -EINPROGRESS)
+ if (urb->unlinked)
continue;
usb_get_urb (urb);
- spin_unlock (&hcd_data_lock);
-
- spin_lock (&urb->lock);
- tmp = urb->status;
- if (tmp == -EINPROGRESS)
- urb->status = -ESHUTDOWN;
- spin_unlock (&urb->lock);
-
- /* kick hcd unless it's already returning this */
- if (tmp == -EINPROGRESS) {
- tmp = urb->pipe;
- unlink1 (hcd, urb);
- dev_dbg (hcd->self.controller,
- "shutdown urb %p pipe %08x ep%d%s%s\n",
- urb, tmp, usb_pipeendpoint (tmp),
- (tmp & USB_DIR_IN) ? "in" : "out",
- ({ char *s; \
- switch (usb_pipetype (tmp)) { \
- case PIPE_CONTROL: s = ""; break; \
- case PIPE_BULK: s = "-bulk"; break; \
- case PIPE_INTERRUPT: s = "-intr"; break; \
- default: s = "-iso"; break; \
- }; s;}));
- }
+ is_in = usb_urb_dir_in(urb);
+ spin_unlock(&hcd_urb_list_lock);
+
+ /* kick hcd */
+ unlink1(hcd, urb, -ESHUTDOWN);
+ dev_dbg (hcd->self.controller,
+ "shutdown urb %p ep%d%s%s\n",
+ urb, usb_endpoint_num(&ep->desc),
+ is_in ? "in" : "out",
+ ({ char *s;
+
+ switch (usb_endpoint_type(&ep->desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ s = ""; break;
+ case USB_ENDPOINT_XFER_BULK:
+ s = "-bulk"; break;
+ case USB_ENDPOINT_XFER_INT:
+ s = "-intr"; break;
+ default:
+ s = "-iso"; break;
+ };
+ s;
+ }));
usb_put_urb (urb);
/* list contents may have changed */
+ spin_lock(&hcd_urb_list_lock);
goto rescan;
}
- spin_unlock (&hcd_data_lock);
- local_irq_enable ();
+ spin_unlock_irq(&hcd_urb_list_lock);
+
+ /* Wait until the endpoint queue is completely empty */
+ while (!list_empty (&ep->urb_list)) {
+ spin_lock_irq(&hcd_urb_list_lock);
+
+ /* The list may have changed while we acquired the spinlock */
+ urb = NULL;
+ if (!list_empty (&ep->urb_list)) {
+ urb = list_entry (ep->urb_list.prev, struct urb,
+ urb_list);
+ usb_get_urb (urb);
+ }
+ spin_unlock_irq(&hcd_urb_list_lock);
- /* synchronize with the hardware, so old configuration state
- * clears out immediately (and will be freed).
- */
- might_sleep ();
+ if (urb) {
+ usb_kill_urb (urb);
+ usb_put_urb (urb);
+ }
+ }
+}
+
+/* Disables the endpoint: synchronizes with the hcd to make sure all
+ * endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
+ * have been called previously. Use for set_configuration, set_interface,
+ * driver removal, physical disconnect.
+ *
+ * example: a qh stored in ep->hcpriv, holding state related to endpoint
+ * type, maxpacket size, toggle, halt status, and scheduling.
+ */
+void usb_hcd_disable_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd;
+
+ might_sleep();
+ hcd = bus_to_hcd(udev->bus);
if (hcd->driver->endpoint_disable)
- hcd->driver->endpoint_disable (hcd, ep);
+ hcd->driver->endpoint_disable(hcd, ep);
+}
+
+/* Protect against drivers that try to unlink URBs after the device
+ * is gone, by waiting until all unlinks for @udev are finished.
+ * Since we don't currently track URBs by device, simply wait until
+ * nothing is running in the locked region of usb_hcd_unlink_urb().
+ */
+void usb_hcd_synchronize_unlinks(struct usb_device *udev)
+{
+ spin_lock_irq(&hcd_urb_unlink_lock);
+ spin_unlock_irq(&hcd_urb_unlink_lock);
}
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_USB_SUSPEND
+/* called in any context */
+int usb_hcd_get_frame_number (struct usb_device *udev)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
-static int hcd_hub_suspend (struct usb_bus *bus)
+ if (!HC_IS_RUNNING (hcd->state))
+ return -ESHUTDOWN;
+ return hcd->driver->get_frame_number (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
{
- struct usb_hcd *hcd;
+ struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
+ int status;
+ int old_state = hcd->state;
- hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_suspend)
- return hcd->driver->hub_suspend (hcd);
- return 0;
+ dev_dbg(&rhdev->dev, "bus %s%s\n",
+ (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend");
+ if (!hcd->driver->bus_suspend) {
+ status = -ENOENT;
+ } else {
+ hcd->state = HC_STATE_QUIESCING;
+ status = hcd->driver->bus_suspend(hcd);
+ }
+ if (status == 0) {
+ usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
+ hcd->state = HC_STATE_SUSPENDED;
+ } else {
+ hcd->state = old_state;
+ dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+ "suspend", status);
+ }
+ return status;
}
-static int hcd_hub_resume (struct usb_bus *bus)
+int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
{
- struct usb_hcd *hcd;
+ struct usb_hcd *hcd = container_of(rhdev->bus, struct usb_hcd, self);
+ int status;
+ int old_state = hcd->state;
+
+ dev_dbg(&rhdev->dev, "usb %s%s\n",
+ (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
+ if (!hcd->driver->bus_resume)
+ return -ENOENT;
+ if (hcd->state == HC_STATE_RUNNING)
+ return 0;
+
+ hcd->state = HC_STATE_RESUMING;
+ status = hcd->driver->bus_resume(hcd);
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+ usb_set_device_state(rhdev, rhdev->actconfig
+ ? USB_STATE_CONFIGURED
+ : USB_STATE_ADDRESS);
+ hcd->state = HC_STATE_RUNNING;
+ } else {
+ hcd->state = old_state;
+ dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+ "resume", status);
+ if (status != -ESHUTDOWN)
+ usb_hc_died(hcd);
+ }
+ return status;
+}
- hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_resume)
- return hcd->driver->hub_resume (hcd);
- return 0;
+/* Workqueue routine for root-hub remote wakeup */
+static void hcd_resume_work(struct work_struct *work)
+{
+ struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
+ struct usb_device *udev = hcd->self.root_hub;
+
+ usb_lock_device(udev);
+ usb_mark_last_busy(udev);
+ usb_external_resume_device(udev, PMSG_REMOTE_RESUME);
+ usb_unlock_device(udev);
}
/**
*
* The USB host controller calls this function when its root hub is
* suspended (with the remote wakeup feature enabled) and a remote
- * wakeup request is received. It queues a request for khubd to
- * resume the root hub.
+ * wakeup request is received. The routine submits a workqueue request
+ * to resume the root hub (that is, manage its downstream ports again).
*/
void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
{
spin_lock_irqsave (&hcd_root_hub_lock, flags);
if (hcd->rh_registered)
- usb_resume_root_hub (hcd->self.root_hub);
+ queue_work(ksuspend_usb_wq, &hcd->wakeup_work);
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
+EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
-#else
-void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
-{
-}
#endif
-EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
/*-------------------------------------------------------------------------*/
mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
return status;
}
-EXPORT_SYMBOL (usb_bus_start_enum);
+EXPORT_SYMBOL_GPL(usb_bus_start_enum);
#endif
/*-------------------------------------------------------------------------*/
-/*
- * usb_hcd_operations - adapts usb_bus framework to HCD framework (bus glue)
- */
-static struct usb_operations usb_hcd_operations = {
- .get_frame_number = hcd_get_frame_number,
- .submit_urb = hcd_submit_urb,
- .unlink_urb = hcd_unlink_urb,
- .buffer_alloc = hcd_buffer_alloc,
- .buffer_free = hcd_buffer_free,
- .disable = hcd_endpoint_disable,
-#ifdef CONFIG_USB_SUSPEND
- .hub_suspend = hcd_hub_suspend,
- .hub_resume = hcd_hub_resume,
-#endif
-};
-
-/*-------------------------------------------------------------------------*/
-
-/**
- * usb_hcd_giveback_urb - return URB from HCD to device driver
- * @hcd: host controller returning the URB
- * @urb: urb being returned to the USB device driver.
- * @regs: pt_regs, passed down to the URB completion handler
- * Context: in_interrupt()
- *
- * This hands the URB from HCD to its USB device driver, using its
- * completion function. The HCD has freed all per-urb resources
- * (and is done using urb->hcpriv). It also released all HCD locks;
- * the device driver won't cause problems if it frees, modifies,
- * or resubmits this URB.
- */
-void usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs)
-{
- int at_root_hub;
-
- at_root_hub = (urb->dev == hcd->self.root_hub);
- urb_unlink (urb);
-
- /* lower level hcd code should use *_dma exclusively */
- if (hcd->self.controller->dma_mask && !at_root_hub) {
- if (usb_pipecontrol (urb->pipe)
- && !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
- dma_unmap_single (hcd->self.controller, urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- if (urb->transfer_buffer_length != 0
- && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
- dma_unmap_single (hcd->self.controller,
- urb->transfer_dma,
- urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
- ? DMA_FROM_DEVICE
- : DMA_TO_DEVICE);
- }
-
- usbmon_urb_complete (&hcd->self, urb);
- /* pass ownership to the completion handler */
- urb->complete (urb, regs);
- atomic_dec (&urb->use_count);
- if (unlikely (urb->reject))
- wake_up (&usb_kill_urb_queue);
- usb_put_urb (urb);
-}
-EXPORT_SYMBOL (usb_hcd_giveback_urb);
-
-/*-------------------------------------------------------------------------*/
-
/**
* usb_hcd_irq - hook IRQs to HCD framework (bus glue)
* @irq: the IRQ being raised
* @__hcd: pointer to the HCD whose IRQ is being signaled
- * @r: saved hardware registers
*
* If the controller isn't HALTed, calls the driver's irq handler.
* Checks whether the controller is now dead.
*/
-irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r)
+irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
- int start = hcd->state;
+ unsigned long flags;
+ irqreturn_t rc;
+
+ /* IRQF_DISABLED doesn't work correctly with shared IRQs
+ * when the first handler doesn't use it. So let's just
+ * assume it's never used.
+ */
+ local_irq_save(flags);
+
+ if (unlikely(hcd->state == HC_STATE_HALT ||
+ !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ rc = IRQ_NONE;
+ } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+ rc = IRQ_NONE;
+ } else {
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
- if (start == HC_STATE_HALT)
- return IRQ_NONE;
- if (hcd->driver->irq (hcd, r) == IRQ_NONE)
- return IRQ_NONE;
+ if (unlikely(hcd->state == HC_STATE_HALT))
+ usb_hc_died(hcd);
+ rc = IRQ_HANDLED;
+ }
- hcd->saw_irq = 1;
- if (hcd->state == HC_STATE_HALT)
- usb_hc_died (hcd);
- return IRQ_HANDLED;
+ local_irq_restore(flags);
+ return rc;
}
/*-------------------------------------------------------------------------*/
/*-------------------------------------------------------------------------*/
-static void hcd_release (struct usb_bus *bus)
-{
- struct usb_hcd *hcd;
-
- hcd = container_of(bus, struct usb_hcd, self);
- kfree(hcd);
-}
-
/**
* usb_create_hcd - create and initialize an HCD structure
* @driver: HC driver that will use this hcd
* If memory is unavailable, returns NULL.
*/
struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
- struct device *dev, char *bus_name)
+ struct device *dev, const char *bus_name)
{
struct usb_hcd *hcd;
return NULL;
}
dev_set_drvdata(dev, hcd);
+ kref_init(&hcd->kref);
usb_bus_init(&hcd->self);
- hcd->self.op = &usb_hcd_operations;
- hcd->self.hcpriv = hcd;
- hcd->self.release = &hcd_release;
hcd->self.controller = dev;
hcd->self.bus_name = bus_name;
+ hcd->self.uses_dma = (dev->dma_mask != NULL);
init_timer(&hcd->rh_timer);
hcd->rh_timer.function = rh_timer_func;
hcd->rh_timer.data = (unsigned long) hcd;
+#ifdef CONFIG_PM
+ INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
+#endif
hcd->driver = driver;
hcd->product_desc = (driver->product_desc) ? driver->product_desc :
"USB Host Controller";
+ return hcd;
+}
+EXPORT_SYMBOL_GPL(usb_create_hcd);
+
+static void hcd_release (struct kref *kref)
+{
+ struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
+ kfree(hcd);
+}
+
+struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
+{
+ if (hcd)
+ kref_get (&hcd->kref);
return hcd;
}
-EXPORT_SYMBOL (usb_create_hcd);
+EXPORT_SYMBOL_GPL(usb_get_hcd);
void usb_put_hcd (struct usb_hcd *hcd)
{
- dev_set_drvdata(hcd->self.controller, NULL);
- usb_bus_put(&hcd->self);
+ if (hcd)
+ kref_put (&hcd->kref, hcd_release);
}
-EXPORT_SYMBOL (usb_put_hcd);
+EXPORT_SYMBOL_GPL(usb_put_hcd);
/**
* usb_add_hcd - finish generic HCD structure initialization and register
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
- /* till now HC has been in an indeterminate state ... */
- if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
- dev_err(hcd->self.controller, "can't reset\n");
- return retval;
- }
+ hcd->authorized_default = hcd->wireless? 0 : 1;
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ /* HC is in reset state, but accessible. Now do the one-time init,
+ * bottom up so that hcds can customize the root hubs before khubd
+ * starts talking to them. (Note, bus id is assigned early too.)
+ */
if ((retval = hcd_buffer_create(hcd)) != 0) {
dev_dbg(hcd->self.controller, "pool alloc failed\n");
return retval;
if ((retval = usb_register_bus(&hcd->self)) < 0)
goto err_register_bus;
+ if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
+ dev_err(hcd->self.controller, "unable to allocate root hub\n");
+ retval = -ENOMEM;
+ goto err_allocate_root_hub;
+ }
+ rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
+ USB_SPEED_FULL;
+ hcd->self.root_hub = rhdev;
+
+ /* wakeup flag init defaults to "everything works" for root hubs,
+ * but drivers can override it in reset() if needed, along with
+ * recording the overall controller's system wakeup capability.
+ */
+ device_init_wakeup(&rhdev->dev, 1);
+
+ /* "reset" is misnamed; its role is now one-time init. the controller
+ * should already have been reset (and boot firmware kicked off etc).
+ */
+ if (hcd->driver->reset && (retval = hcd->driver->reset(hcd)) < 0) {
+ dev_err(hcd->self.controller, "can't setup\n");
+ goto err_hcd_driver_setup;
+ }
+
+ /* NOTE: root hub and controller capabilities may not be the same */
+ if (device_can_wakeup(hcd->self.controller)
+ && device_can_wakeup(&hcd->self.root_hub->dev))
+ dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
+
+ /* enable irqs just before we start the controller */
if (hcd->driver->irq) {
- char buf[8], *bufp = buf;
-#ifdef __sparc__
- bufp = __irq_itoa(irqnum);
-#else
- sprintf(buf, "%d", irqnum);
-#endif
+ /* IRQF_DISABLED doesn't work as advertised when used together
+ * with IRQF_SHARED. As usb_hcd_irq() will always disable
+ * interrupts we can remove it here.
+ */
+ if (irqflags & IRQF_SHARED)
+ irqflags &= ~IRQF_DISABLED;
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
hcd->irq_descr, hcd)) != 0) {
dev_err(hcd->self.controller,
- "request interrupt %s failed\n", bufp);
+ "request interrupt %d failed\n", irqnum);
goto err_request_irq;
}
hcd->irq = irqnum;
- dev_info(hcd->self.controller, "irq %s, %s 0x%08llx\n", bufp,
+ dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
(hcd->driver->flags & HCD_MEMORY) ?
"io mem" : "io base",
(unsigned long long)hcd->rsrc_start);
(unsigned long long)hcd->rsrc_start);
}
- /* Allocate the root hub before calling hcd->driver->start(),
- * but don't register it until afterward so that the hardware
- * is running.
- */
- if ((rhdev = usb_alloc_dev(NULL, &hcd->self, 0)) == NULL) {
- dev_err(hcd->self.controller, "unable to allocate root hub\n");
- retval = -ENOMEM;
- goto err_allocate_root_hub;
- }
- rhdev->speed = (hcd->driver->flags & HCD_USB2) ? USB_SPEED_HIGH :
- USB_SPEED_FULL;
-
- /* Although in principle hcd->driver->start() might need to use rhdev,
- * none of the current drivers do.
- */
if ((retval = hcd->driver->start(hcd)) < 0) {
dev_err(hcd->self.controller, "startup error %d\n", retval);
goto err_hcd_driver_start;
}
- /* hcd->driver->start() reported can_wakeup, probably with
- * assistance from board's boot firmware.
- * NOTE: normal devices won't enable wakeup by default.
- */
- if (hcd->can_wakeup)
- dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
- hcd->remote_wakeup = hcd->can_wakeup;
-
- if ((retval = register_root_hub(rhdev, hcd)) != 0)
+ /* starting here, usbcore will pay attention to this root hub */
+ rhdev->bus_mA = min(500u, hcd->power_budget);
+ if ((retval = register_root_hub(hcd)) != 0)
goto err_register_root_hub;
+ retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+ if (retval < 0) {
+ printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n",
+ retval);
+ goto error_create_attr_group;
+ }
if (hcd->uses_new_polling && hcd->poll_rh)
usb_hcd_poll_rh_status(hcd);
return retval;
- err_register_root_hub:
+error_create_attr_group:
+ mutex_lock(&usb_bus_list_lock);
+ usb_disconnect(&hcd->self.root_hub);
+ mutex_unlock(&usb_bus_list_lock);
+err_register_root_hub:
hcd->driver->stop(hcd);
-
- err_hcd_driver_start:
- usb_put_dev(rhdev);
-
- err_allocate_root_hub:
+err_hcd_driver_start:
if (hcd->irq >= 0)
free_irq(irqnum, hcd);
-
- err_request_irq:
+err_request_irq:
+err_hcd_driver_setup:
+ hcd->self.root_hub = NULL;
+ usb_put_dev(rhdev);
+err_allocate_root_hub:
usb_deregister_bus(&hcd->self);
-
- err_register_bus:
+err_register_bus:
hcd_buffer_destroy(hcd);
return retval;
}
-EXPORT_SYMBOL (usb_add_hcd);
+EXPORT_SYMBOL_GPL(usb_add_hcd);
/**
* usb_remove_hcd - shutdown processing for generic HCDs
spin_lock_irq (&hcd_root_hub_lock);
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);
- usb_disconnect(&hcd->self.root_hub);
- hcd->poll_rh = 0;
- del_timer_sync(&hcd->rh_timer);
+#ifdef CONFIG_PM
+ cancel_work_sync(&hcd->wakeup_work);
+#endif
+
+ sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group);
+ mutex_lock(&usb_bus_list_lock);
+ usb_disconnect(&hcd->self.root_hub);
+ mutex_unlock(&usb_bus_list_lock);
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
+ hcd->poll_rh = 0;
+ del_timer_sync(&hcd->rh_timer);
+
if (hcd->irq >= 0)
free_irq(hcd->irq, hcd);
usb_deregister_bus(&hcd->self);
hcd_buffer_destroy(hcd);
}
-EXPORT_SYMBOL (usb_remove_hcd);
+EXPORT_SYMBOL_GPL(usb_remove_hcd);
+
+void
+usb_hcd_platform_shutdown(struct platform_device* dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
/*-------------------------------------------------------------------------*/
-#if defined(CONFIG_USB_MON)
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
struct usb_mon_operations *mon_ops;
}
EXPORT_SYMBOL_GPL (usb_mon_deregister);
-#endif /* CONFIG_USB_MON */
+#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff