#include <linux/device.h>
#include <linux/usb.h>
+#include <linux/usb/quirks.h>
#include <linux/workqueue.h>
#include "hcd.h"
#include "usb.h"
+
#ifdef CONFIG_HOTPLUG
/*
dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
spin_lock(&dynids->lock);
- list_add_tail(&dynids->list, &dynid->node);
+ list_add_tail(&dynid->node, &dynids->list);
spin_unlock(&dynids->lock);
if (get_driver(driver)) {
goto exit;
if (usb_drv->probe != NULL)
- error = sysfs_create_file(&usb_drv->drvwrap.driver.kobj,
- &driver_attr_new_id.attr);
+ error = driver_create_file(&usb_drv->drvwrap.driver,
+ &driver_attr_new_id);
exit:
return error;
}
return;
if (usb_drv->probe != NULL)
- sysfs_remove_file(&usb_drv->drvwrap.driver.kobj,
- &driver_attr_new_id.attr);
+ driver_remove_file(&usb_drv->drvwrap.driver,
+ &driver_attr_new_id);
}
static void usb_free_dynids(struct usb_driver *usb_drv)
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
+ if (udev->authorized == 0) {
+ dev_err(&intf->dev, "Device is not authorized for usage\n");
+ return -ENODEV;
+ }
+
id = usb_match_id(intf, driver->id_table);
if (!id)
id = usb_match_dynamic_id(intf, driver);
* way to bind to an interface is to return the private data from
* the driver's probe() method.
*
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver probe() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
+ * Callers must own the device lock, so driver probe() entries don't need
+ * extra locking, but other call contexts may need to explicitly claim that
+ * lock.
*/
int usb_driver_claim_interface(struct usb_driver *driver,
- struct usb_interface *iface, void* priv)
+ struct usb_interface *iface, void *priv)
{
struct device *dev = &iface->dev;
struct usb_device *udev = interface_to_usbdev(iface);
return retval;
}
-EXPORT_SYMBOL(usb_driver_claim_interface);
+EXPORT_SYMBOL_GPL(usb_driver_claim_interface);
/**
* usb_driver_release_interface - unbind a driver from an interface
* also causes the driver disconnect() method to be called.
*
* This call is synchronous, and may not be used in an interrupt context.
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver disconnect() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
+ * Callers must own the device lock, so driver disconnect() entries don't
+ * need extra locking, but other call contexts may need to explicitly claim
+ * that lock.
*/
void usb_driver_release_interface(struct usb_driver *driver,
struct usb_interface *iface)
iface->needs_remote_wakeup = 0;
usb_pm_unlock(udev);
}
-EXPORT_SYMBOL(usb_driver_release_interface);
+EXPORT_SYMBOL_GPL(usb_driver_release_interface);
/* returns 0 if no match, 1 if match */
-int usb_match_one_id(struct usb_interface *interface,
- const struct usb_device_id *id)
+int usb_match_device(struct usb_device *dev, const struct usb_device_id *id)
{
- struct usb_host_interface *intf;
- struct usb_device *dev;
-
- /* proc_connectinfo in devio.c may call us with id == NULL. */
- if (id == NULL)
- return 0;
-
- intf = interface->cur_altsetting;
- dev = interface_to_usbdev(interface);
-
if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
return 0;
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
- (id->bDeviceSubClass!= dev->descriptor.bDeviceSubClass))
+ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
return 0;
if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
(id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
return 0;
+ return 1;
+}
+
+/* returns 0 if no match, 1 if match */
+int usb_match_one_id(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ struct usb_host_interface *intf;
+ struct usb_device *dev;
+
+ /* proc_connectinfo in devio.c may call us with id == NULL. */
+ if (id == NULL)
+ return 0;
+
+ intf = interface->cur_altsetting;
+ dev = interface_to_usbdev(interface);
+
+ if (!usb_match_device(dev, id))
+ return 0;
+
/* The interface class, subclass, and protocol should never be
* checked for a match if the device class is Vendor Specific,
* unless the match record specifies the Vendor ID. */
id->driver_info is the way to create an entry that
indicates that the driver want to examine every
device and interface. */
- for (; id->idVendor || id->bDeviceClass || id->bInterfaceClass ||
- id->driver_info; id++) {
+ for (; id->idVendor || id->idProduct || id->bDeviceClass ||
+ id->bInterfaceClass || id->driver_info; id++) {
if (usb_match_one_id(interface, id))
return id;
}
return NULL;
}
-EXPORT_SYMBOL_GPL_FUTURE(usb_match_id);
+EXPORT_SYMBOL_GPL(usb_match_id);
static int usb_device_match(struct device *dev, struct device_driver *drv)
{
}
#ifdef CONFIG_HOTPLUG
-
-/*
- * This sends an uevent to userspace, typically helping to load driver
- * or other modules, configure the device, and more. Drivers can provide
- * a MODULE_DEVICE_TABLE to help with module loading subtasks.
- *
- * We're called either from khubd (the typical case) or from root hub
- * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle
- * delays in event delivery. Use sysfs (and DEVPATH) to make sure the
- * device (and this configuration!) are still present.
- */
-static int usb_uevent(struct device *dev, char **envp, int num_envp,
- char *buffer, int buffer_size)
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- struct usb_interface *intf;
struct usb_device *usb_dev;
- struct usb_host_interface *alt;
- int i = 0;
- int length = 0;
-
- if (!dev)
- return -ENODEV;
/* driver is often null here; dev_dbg() would oops */
- pr_debug ("usb %s: uevent\n", dev->bus_id);
+ pr_debug("usb %s: uevent\n", dev->bus_id);
- if (is_usb_device(dev)) {
+ if (is_usb_device(dev))
usb_dev = to_usb_device(dev);
- alt = NULL;
- } else {
- intf = to_usb_interface(dev);
+ else {
+ struct usb_interface *intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev(intf);
- alt = intf->cur_altsetting;
}
if (usb_dev->devnum < 0) {
- pr_debug ("usb %s: already deleted?\n", dev->bus_id);
+ pr_debug("usb %s: already deleted?\n", dev->bus_id);
return -ENODEV;
}
if (!usb_dev->bus) {
- pr_debug ("usb %s: bus removed?\n", dev->bus_id);
+ pr_debug("usb %s: bus removed?\n", dev->bus_id);
return -ENODEV;
}
#ifdef CONFIG_USB_DEVICEFS
/* If this is available, userspace programs can directly read
* all the device descriptors we don't tell them about. Or
- * even act as usermode drivers.
- *
- * FIXME reduce hardwired intelligence here
+ * act as usermode drivers.
*/
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "DEVICE=/proc/bus/usb/%03d/%03d",
+ if (add_uevent_var(env, "DEVICE=/proc/bus/usb/%03d/%03d",
usb_dev->bus->busnum, usb_dev->devnum))
return -ENOMEM;
#endif
/* per-device configurations are common */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "PRODUCT=%x/%x/%x",
+ if (add_uevent_var(env, "PRODUCT=%x/%x/%x",
le16_to_cpu(usb_dev->descriptor.idVendor),
le16_to_cpu(usb_dev->descriptor.idProduct),
le16_to_cpu(usb_dev->descriptor.bcdDevice)))
return -ENOMEM;
/* class-based driver binding models */
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "TYPE=%d/%d/%d",
+ if (add_uevent_var(env, "TYPE=%d/%d/%d",
usb_dev->descriptor.bDeviceClass,
usb_dev->descriptor.bDeviceSubClass,
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (!is_usb_device(dev)) {
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
-
- if (add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
- }
-
- envp[i] = NULL;
-
return 0;
}
#else
-static int usb_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+static int usb_uevent(struct device *dev, struct kobj_uevent_env *env)
{
return -ENODEV;
}
-
#endif /* CONFIG_HOTPLUG */
/**
* usb_register_driver - register a USB interface driver
* @new_driver: USB operations for the interface driver
* @owner: module owner of this driver.
+ * @mod_name: module name string
*
* Registers a USB interface driver with the USB core. The list of
* unattached interfaces will be rescanned whenever a new driver is
* usb_register_dev() to enable that functionality. This function no longer
* takes care of that.
*/
-int usb_register_driver(struct usb_driver *new_driver, struct module *owner)
+int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
+ const char *mod_name)
{
int retval = 0;
new_driver->drvwrap.driver.probe = usb_probe_interface;
new_driver->drvwrap.driver.remove = usb_unbind_interface;
new_driver->drvwrap.driver.owner = owner;
+ new_driver->drvwrap.driver.mod_name = mod_name;
spin_lock_init(&new_driver->dynids.lock);
INIT_LIST_HEAD(&new_driver->dynids.list);
return retval;
}
-EXPORT_SYMBOL_GPL_FUTURE(usb_register_driver);
+EXPORT_SYMBOL_GPL(usb_register_driver);
/**
* usb_deregister - unregister a USB interface driver
usbfs_update_special();
}
-EXPORT_SYMBOL_GPL_FUTURE(usb_deregister);
+EXPORT_SYMBOL_GPL(usb_deregister);
#ifdef CONFIG_PM
udev->state == USB_STATE_SUSPENDED)
goto done;
- /* For devices that don't have a driver, we do a standard suspend. */
- if (udev->dev.driver == NULL) {
+ /* For devices that don't have a driver, we do a generic suspend. */
+ if (udev->dev.driver)
+ udriver = to_usb_device_driver(udev->dev.driver);
+ else {
udev->do_remote_wakeup = 0;
- status = usb_port_suspend(udev);
- goto done;
+ udriver = &usb_generic_driver;
}
-
- udriver = to_usb_device_driver(udev->dev.driver);
status = udriver->suspend(udev, msg);
-done:
- // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ done:
+ dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
udev->dev.power.power_state.event = msg.event;
return status;
struct usb_device_driver *udriver;
int status = 0;
- if (udev->state == USB_STATE_NOTATTACHED ||
- udev->state != USB_STATE_SUSPENDED)
+ if (udev->state == USB_STATE_NOTATTACHED)
+ goto done;
+ if (udev->state != USB_STATE_SUSPENDED && !udev->reset_resume)
goto done;
/* Can't resume it if it doesn't have a driver. */
goto done;
}
+ if (udev->quirks & USB_QUIRK_RESET_RESUME)
+ udev->reset_resume = 1;
+
udriver = to_usb_device_driver(udev->dev.driver);
status = udriver->resume(udev);
-done:
- // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
- if (status == 0)
+ done:
+ dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ if (status == 0) {
+ udev->autoresume_disabled = 0;
udev->dev.power.power_state.event = PM_EVENT_ON;
+ }
return status;
}
dev_err(&intf->dev, "%s error %d\n",
"suspend", status);
} else {
- // FIXME else if there's no suspend method, disconnect...
- // Not possible if auto_pm is set...
+ /*
+ * FIXME else if there's no suspend method, disconnect...
+ * Not possible if auto_pm is set...
+ */
dev_warn(&intf->dev, "no suspend for driver %s?\n",
driver->name);
mark_quiesced(intf);
}
-done:
- // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
- if (status == 0)
- intf->dev.power.power_state.event = msg.event;
+ done:
+ dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
return status;
}
/* Caller has locked intf's usb_device's pm_mutex */
-static int usb_resume_interface(struct usb_interface *intf)
+static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
{
struct usb_driver *driver;
int status = 0;
}
driver = to_usb_driver(intf->dev.driver);
- if (driver->resume) {
- status = driver->resume(intf);
- if (status)
- dev_err(&intf->dev, "%s error %d\n",
- "resume", status);
- else
- mark_active(intf);
+ if (reset_resume) {
+ if (driver->reset_resume) {
+ status = driver->reset_resume(intf);
+ if (status)
+ dev_err(&intf->dev, "%s error %d\n",
+ "reset_resume", status);
+ } else {
+ /* status = -EOPNOTSUPP; */
+ dev_warn(&intf->dev, "no %s for driver %s?\n",
+ "reset_resume", driver->name);
+ }
} else {
- dev_warn(&intf->dev, "no resume for driver %s?\n",
- driver->name);
- mark_active(intf);
+ if (driver->resume) {
+ status = driver->resume(intf);
+ if (status)
+ dev_err(&intf->dev, "%s error %d\n",
+ "resume", status);
+ } else {
+ /* status = -EOPNOTSUPP; */
+ dev_warn(&intf->dev, "no %s for driver %s?\n",
+ "resume", driver->name);
+ }
}
done:
- // dev_dbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_vdbg(&intf->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
- intf->dev.power.power_state.event = PM_EVENT_ON;
+ mark_active(intf);
+
+ /* FIXME: Unbind the driver and reprobe if the resume failed
+ * (not possible if auto_pm is set) */
return status;
}
#ifdef CONFIG_USB_SUSPEND
/* Internal routine to check whether we may autosuspend a device. */
-static int autosuspend_check(struct usb_device *udev)
+static int autosuspend_check(struct usb_device *udev, int reschedule)
{
int i;
struct usb_interface *intf;
+ unsigned long suspend_time, j;
- /* For autosuspend, fail fast if anything is in use.
- * Also fail if any interfaces require remote wakeup but it
- * isn't available. */
+ /* For autosuspend, fail fast if anything is in use or autosuspend
+ * is disabled. Also fail if any interfaces require remote wakeup
+ * but it isn't available.
+ */
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->pm_usage_cnt > 0)
return -EBUSY;
+ if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled)
+ return -EPERM;
+
+ suspend_time = udev->last_busy + udev->autosuspend_delay;
if (udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
"for autosuspend\n");
return -EOPNOTSUPP;
}
+
+ /* Don't allow autosuspend if the device will need
+ * a reset-resume and any of its interface drivers
+ * doesn't include support.
+ */
+ if (udev->quirks & USB_QUIRK_RESET_RESUME) {
+ struct usb_driver *driver;
+
+ driver = to_usb_driver(intf->dev.driver);
+ if (!driver->reset_resume)
+ return -EOPNOTSUPP;
+ }
+ }
+ }
+
+ /* If everything is okay but the device hasn't been idle for long
+ * enough, queue a delayed autosuspend request. If the device
+ * _has_ been idle for long enough and the reschedule flag is set,
+ * likewise queue a delayed (1 second) autosuspend request.
+ */
+ j = jiffies;
+ if (time_before(j, suspend_time))
+ reschedule = 1;
+ else
+ suspend_time = j + HZ;
+ if (reschedule) {
+ if (!timer_pending(&udev->autosuspend.timer)) {
+ queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+ round_jiffies_relative(suspend_time - j));
}
+ return -EAGAIN;
}
return 0;
}
#else
-#define autosuspend_check(udev) 0
+static inline int autosuspend_check(struct usb_device *udev, int reschedule)
+{
+ return 0;
+}
-#endif
+#endif /* CONFIG_USB_SUSPEND */
/**
* usb_suspend_both - suspend a USB device and its interfaces
*
* This routine can run only in process context.
*/
-int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
+static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
{
int status = 0;
int i = 0;
struct usb_interface *intf;
struct usb_device *parent = udev->parent;
- cancel_delayed_work(&udev->autosuspend);
- if (udev->state == USB_STATE_NOTATTACHED)
- return 0;
- if (udev->state == USB_STATE_SUSPENDED)
- return 0;
+ if (udev->state == USB_STATE_NOTATTACHED ||
+ udev->state == USB_STATE_SUSPENDED)
+ goto done;
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->auto_pm) {
- status = autosuspend_check(udev);
+ status = autosuspend_check(udev, 0);
if (status < 0)
- return status;
+ goto done;
}
/* Suspend all the interfaces and then udev itself */
if (status != 0) {
while (--i >= 0) {
intf = udev->actconfig->interface[i];
- usb_resume_interface(intf);
+ usb_resume_interface(intf, 0);
+ }
+
+ /* Try another autosuspend when the interfaces aren't busy */
+ if (udev->auto_pm)
+ autosuspend_check(udev, status == -EBUSY);
+
+ /* If the suspend succeeded then prevent any more URB submissions,
+ * flush any outstanding URBs, and propagate the suspend up the tree.
+ */
+ } else {
+ cancel_delayed_work(&udev->autosuspend);
+ udev->can_submit = 0;
+ for (i = 0; i < 16; ++i) {
+ usb_hcd_flush_endpoint(udev, udev->ep_out[i]);
+ usb_hcd_flush_endpoint(udev, udev->ep_in[i]);
}
- /* If the suspend succeeded, propagate it up the tree */
- } else if (parent)
- usb_autosuspend_device(parent);
+ /* If this is just a FREEZE or a PRETHAW, udev might
+ * not really be suspended. Only true suspends get
+ * propagated up the device tree.
+ */
+ if (parent && udev->state == USB_STATE_SUSPENDED)
+ usb_autosuspend_device(parent);
+ }
- // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ done:
+ dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
return status;
}
*
* This routine can run only in process context.
*/
-int usb_resume_both(struct usb_device *udev)
+static int usb_resume_both(struct usb_device *udev)
{
int status = 0;
int i;
struct usb_device *parent = udev->parent;
cancel_delayed_work(&udev->autosuspend);
- if (udev->state == USB_STATE_NOTATTACHED)
- return -ENODEV;
+ if (udev->state == USB_STATE_NOTATTACHED) {
+ status = -ENODEV;
+ goto done;
+ }
+ udev->can_submit = 1;
/* Propagate the resume up the tree, if necessary */
if (udev->state == USB_STATE_SUSPENDED) {
+ if (udev->auto_pm && udev->autoresume_disabled) {
+ status = -EPERM;
+ goto done;
+ }
if (parent) {
status = usb_autoresume_device(parent);
if (status == 0) {
status = usb_resume_device(udev);
- if (status) {
+ if (status || udev->state ==
+ USB_STATE_NOTATTACHED) {
usb_autosuspend_device(parent);
/* It's possible usb_resume_device()
/* We can't progagate beyond the USB subsystem,
* so if a root hub's controller is suspended
* then we're stuck. */
- if (udev->dev.parent->power.power_state.event !=
- PM_EVENT_ON)
- status = -EHOSTUNREACH;
- else
- status = usb_resume_device(udev);
- }
+ status = usb_resume_device(udev);
+ }
} else {
- /* Needed only for setting udev->dev.power.power_state.event
- * and for possible debugging message. */
+ /* Needed for setting udev->dev.power.power_state.event,
+ * for possible debugging message, and for reset_resume. */
status = usb_resume_device(udev);
}
if (status == 0 && udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
- usb_resume_interface(intf);
+ usb_resume_interface(intf, udev->reset_resume);
}
}
- // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ done:
+ dev_vdbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ udev->reset_resume = 0;
return status;
}
int status = 0;
usb_pm_lock(udev);
+ udev->auto_pm = 1;
udev->pm_usage_cnt += inc_usage_cnt;
WARN_ON(udev->pm_usage_cnt < 0);
+ if (inc_usage_cnt)
+ udev->last_busy = jiffies;
if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
- udev->auto_pm = 1;
- status = usb_resume_both(udev);
+ if (udev->state == USB_STATE_SUSPENDED)
+ status = usb_resume_both(udev);
if (status != 0)
udev->pm_usage_cnt -= inc_usage_cnt;
- } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
- queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- USB_AUTOSUSPEND_DELAY);
+ else if (inc_usage_cnt)
+ udev->last_busy = jiffies;
+ } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) {
+ status = usb_suspend_both(udev, PMSG_SUSPEND);
+ }
usb_pm_unlock(udev);
return status;
}
+/* usb_autosuspend_work - callback routine to autosuspend a USB device */
+void usb_autosuspend_work(struct work_struct *work)
+{
+ struct usb_device *udev =
+ container_of(work, struct usb_device, autosuspend.work);
+
+ usb_autopm_do_device(udev, 0);
+}
+
/**
* usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
* @udev: the usb_device to autosuspend
int status;
status = usb_autopm_do_device(udev, -1);
- // dev_dbg(&udev->dev, "%s: cnt %d\n",
- // __FUNCTION__, udev->pm_usage_cnt);
+ dev_vdbg(&udev->dev, "%s: cnt %d\n",
+ __FUNCTION__, udev->pm_usage_cnt);
+}
+
+/**
+ * usb_try_autosuspend_device - attempt an autosuspend of a USB device and its interfaces
+ * @udev: the usb_device to autosuspend
+ *
+ * This routine should be called when a core subsystem thinks @udev may
+ * be ready to autosuspend.
+ *
+ * @udev's usage counter left unchanged. If it or any of the usage counters
+ * for an active interface is greater than 0, or autosuspend is not allowed
+ * for any other reason, no autosuspend request will be queued.
+ *
+ * This routine can run only in process context.
+ */
+void usb_try_autosuspend_device(struct usb_device *udev)
+{
+ usb_autopm_do_device(udev, 0);
+ dev_vdbg(&udev->dev, "%s: cnt %d\n",
+ __FUNCTION__, udev->pm_usage_cnt);
}
/**
int status;
status = usb_autopm_do_device(udev, 1);
- // dev_dbg(&udev->dev, "%s: status %d cnt %d\n",
- // __FUNCTION__, status, udev->pm_usage_cnt);
+ dev_vdbg(&udev->dev, "%s: status %d cnt %d\n",
+ __FUNCTION__, status, udev->pm_usage_cnt);
return status;
}
if (intf->condition == USB_INTERFACE_UNBOUND)
status = -ENODEV;
else {
+ udev->auto_pm = 1;
intf->pm_usage_cnt += inc_usage_cnt;
+ udev->last_busy = jiffies;
if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) {
- udev->auto_pm = 1;
- status = usb_resume_both(udev);
+ if (udev->state == USB_STATE_SUSPENDED)
+ status = usb_resume_both(udev);
if (status != 0)
intf->pm_usage_cnt -= inc_usage_cnt;
- } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
- queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- USB_AUTOSUSPEND_DELAY);
+ else
+ udev->last_busy = jiffies;
+ } else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) {
+ status = usb_suspend_both(udev, PMSG_SUSPEND);
+ }
}
usb_pm_unlock(udev);
return status;
int status;
status = usb_autopm_do_interface(intf, -1);
- // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
- // __FUNCTION__, status, intf->pm_usage_cnt);
+ dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+ __FUNCTION__, status, intf->pm_usage_cnt);
}
EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
* or @intf is unbound. A typical example would be a character-device
* driver when its device file is opened.
*
- * The routine increments @intf's usage counter. So long as the counter
- * is greater than 0, autosuspend will not be allowed for @intf or its
- * usb_device. When the driver is finished using @intf it should call
- * usb_autopm_put_interface() to decrement the usage counter and queue
- * a delayed autosuspend request (if the counter is <= 0).
+ *
+ * The routine increments @intf's usage counter. (However if the
+ * autoresume fails then the counter is re-decremented.) So long as the
+ * counter is greater than 0, autosuspend will not be allowed for @intf
+ * or its usb_device. When the driver is finished using @intf it should
+ * call usb_autopm_put_interface() to decrement the usage counter and
+ * queue a delayed autosuspend request (if the counter is <= 0).
+ *
*
* Note that @intf->pm_usage_cnt is owned by the interface driver. The
* core will not change its value other than the increment and decrement
int status;
status = usb_autopm_do_interface(intf, 1);
- // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
- // __FUNCTION__, status, intf->pm_usage_cnt);
+ dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+ __FUNCTION__, status, intf->pm_usage_cnt);
return status;
}
EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
int status;
status = usb_autopm_do_interface(intf, 0);
- // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
- // __FUNCTION__, status, intf->pm_usage_cnt);
+ dev_vdbg(&intf->dev, "%s: status %d cnt %d\n",
+ __FUNCTION__, status, intf->pm_usage_cnt);
return status;
}
EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
+#else
+
+void usb_autosuspend_work(struct work_struct *work)
+{}
+
#endif /* CONFIG_USB_SUSPEND */
-static int usb_suspend(struct device *dev, pm_message_t message)
+/**
+ * usb_external_suspend_device - external suspend of a USB device and its interfaces
+ * @udev: the usb_device to suspend
+ * @msg: Power Management message describing this state transition
+ *
+ * This routine handles external suspend requests: ones not generated
+ * internally by a USB driver (autosuspend) but rather coming from the user
+ * (via sysfs) or the PM core (system sleep). The suspend will be carried
+ * out regardless of @udev's usage counter or those of its interfaces,
+ * and regardless of whether or not remote wakeup is enabled. Of course,
+ * interface drivers still have the option of failing the suspend (if
+ * there are unsuspended children, for example).
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg)
{
int status;
- if (is_usb_device(dev)) {
- struct usb_device *udev = to_usb_device(dev);
-
- usb_pm_lock(udev);
- udev->auto_pm = 0;
- status = usb_suspend_both(udev, message);
- usb_pm_unlock(udev);
- } else
- status = 0;
+ usb_pm_lock(udev);
+ udev->auto_pm = 0;
+ status = usb_suspend_both(udev, msg);
+ usb_pm_unlock(udev);
return status;
}
-static int usb_resume(struct device *dev)
+/**
+ * usb_external_resume_device - external resume of a USB device and its interfaces
+ * @udev: the usb_device to resume
+ *
+ * This routine handles external resume requests: ones not generated
+ * internally by a USB driver (autoresume) but rather coming from the user
+ * (via sysfs), the PM core (system resume), or the device itself (remote
+ * wakeup). @udev's usage counter is unaffected.
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_external_resume_device(struct usb_device *udev)
{
int status;
- if (is_usb_device(dev)) {
- struct usb_device *udev = to_usb_device(dev);
-
- usb_pm_lock(udev);
- udev->auto_pm = 0;
- status = usb_resume_both(udev);
- usb_pm_unlock(udev);
+ usb_pm_lock(udev);
+ udev->auto_pm = 0;
+ status = usb_resume_both(udev);
+ udev->last_busy = jiffies;
+ usb_pm_unlock(udev);
- /* Rebind drivers that had no suspend method? */
- } else
- status = 0;
+ /* Now that the device is awake, we can start trying to autosuspend
+ * it again. */
+ if (status == 0)
+ usb_try_autosuspend_device(udev);
return status;
}
+static int usb_suspend(struct device *dev, pm_message_t message)
+{
+ struct usb_device *udev;
+
+ if (!is_usb_device(dev)) /* Ignore PM for interfaces */
+ return 0;
+ udev = to_usb_device(dev);
+
+ /* If udev is already suspended, we can skip this suspend and
+ * we should also skip the upcoming system resume. */
+ if (udev->state == USB_STATE_SUSPENDED) {
+ udev->skip_sys_resume = 1;
+ return 0;
+ }
+
+ udev->skip_sys_resume = 0;
+ return usb_external_suspend_device(udev, message);
+}
+
+static int usb_resume(struct device *dev)
+{
+ struct usb_device *udev;
+
+ if (!is_usb_device(dev)) /* Ignore PM for interfaces */
+ return 0;
+ udev = to_usb_device(dev);
+
+ /* If udev->skip_sys_resume is set then udev was already suspended
+ * when the system suspend started, so we don't want to resume
+ * udev during this system wakeup. However a reset-resume counts
+ * as a wakeup event, so allow a reset-resume to occur if remote
+ * wakeup is enabled. */
+ if (udev->skip_sys_resume) {
+ if (!(udev->reset_resume && udev->do_remote_wakeup))
+ return -EHOSTUNREACH;
+ }
+ return usb_external_resume_device(udev);
+}
+
+#else
+
+#define usb_suspend NULL
+#define usb_resume NULL
+
#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
.name = "usb",
.match = usb_device_match,
.uevent = usb_uevent,
-#ifdef CONFIG_PM
.suspend = usb_suspend,
.resume = usb_resume,
-#endif
};
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff