#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/kdev_t.h>
#include <linux/idr.h>
#include <linux/thermal.h>
#include <linux/spinlock.h>
+#include <linux/reboot.h>
MODULE_AUTHOR("Zhang Rui");
MODULE_DESCRIPTION("Generic thermal management sysfs support");
temp_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
+ long temperature;
+ int ret;
if (!tz->ops->get_temp)
return -EPERM;
- return tz->ops->get_temp(tz, buf);
+ ret = tz->ops->get_temp(tz, &temperature);
+
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%ld\n", temperature);
}
static ssize_t
mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
+ enum thermal_device_mode mode;
+ int result;
if (!tz->ops->get_mode)
return -EPERM;
- return tz->ops->get_mode(tz, buf);
+ result = tz->ops->get_mode(tz, &mode);
+ if (result)
+ return result;
+
+ return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
+ : "disabled");
}
static ssize_t
if (!tz->ops->set_mode)
return -EPERM;
- result = tz->ops->set_mode(tz, buf);
+ if (!strncmp(buf, "enabled", sizeof("enabled")))
+ result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
+ else if (!strncmp(buf, "disabled", sizeof("disabled")))
+ result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
+ else
+ result = -EINVAL;
+
if (result)
return result;
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
- int trip;
+ enum thermal_trip_type type;
+ int trip, result;
if (!tz->ops->get_trip_type)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
return -EINVAL;
- return tz->ops->get_trip_type(tz, trip, buf);
+ result = tz->ops->get_trip_type(tz, trip, &type);
+ if (result)
+ return result;
+
+ switch (type) {
+ case THERMAL_TRIP_CRITICAL:
+ return sprintf(buf, "critical\n");
+ case THERMAL_TRIP_HOT:
+ return sprintf(buf, "hot\n");
+ case THERMAL_TRIP_PASSIVE:
+ return sprintf(buf, "passive\n");
+ case THERMAL_TRIP_ACTIVE:
+ return sprintf(buf, "active\n");
+ default:
+ return sprintf(buf, "unknown\n");
+ }
}
static ssize_t
char *buf)
{
struct thermal_zone_device *tz = to_thermal_zone(dev);
- int trip;
+ int trip, ret;
+ long temperature;
if (!tz->ops->get_trip_temp)
return -EPERM;
if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
return -EINVAL;
- return tz->ops->get_trip_temp(tz, trip, buf);
+ ret = tz->ops->get_trip_temp(tz, trip, &temperature);
+
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%ld\n", temperature);
+}
+
+static ssize_t
+passive_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ struct thermal_cooling_device *cdev = NULL;
+ int state;
+
+ if (!sscanf(buf, "%d\n", &state))
+ return -EINVAL;
+
+ /* sanity check: values below 1000 millicelcius don't make sense
+ * and can cause the system to go into a thermal heart attack
+ */
+ if (state && state < 1000)
+ return -EINVAL;
+
+ if (state && !tz->forced_passive) {
+ mutex_lock(&thermal_list_lock);
+ list_for_each_entry(cdev, &thermal_cdev_list, node) {
+ if (!strncmp("Processor", cdev->type,
+ sizeof("Processor")))
+ thermal_zone_bind_cooling_device(tz,
+ THERMAL_TRIPS_NONE,
+ cdev);
+ }
+ mutex_unlock(&thermal_list_lock);
+ if (!tz->passive_delay)
+ tz->passive_delay = 1000;
+ } else if (!state && tz->forced_passive) {
+ mutex_lock(&thermal_list_lock);
+ list_for_each_entry(cdev, &thermal_cdev_list, node) {
+ if (!strncmp("Processor", cdev->type,
+ sizeof("Processor")))
+ thermal_zone_unbind_cooling_device(tz,
+ THERMAL_TRIPS_NONE,
+ cdev);
+ }
+ mutex_unlock(&thermal_list_lock);
+ tz->passive_delay = 0;
+ }
+
+ tz->tc1 = 1;
+ tz->tc2 = 1;
+
+ tz->forced_passive = state;
+
+ thermal_zone_device_update(tz);
+
+ return count;
+}
+
+static ssize_t
+passive_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+ return sprintf(buf, "%d\n", tz->forced_passive);
}
static DEVICE_ATTR(type, 0444, type_show, NULL);
static DEVICE_ATTR(temp, 0444, temp_show, NULL);
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
+static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \
+ passive_store);
static struct device_attribute trip_point_attrs[] = {
__ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
+ unsigned long state;
+ int ret;
- return cdev->ops->get_max_state(cdev, buf);
+ ret = cdev->ops->get_max_state(cdev, &state);
+ if (ret)
+ return ret;
+ return sprintf(buf, "%ld\n", state);
}
static ssize_t
struct device_attribute *attr, char *buf)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
+ unsigned long state;
+ int ret;
- return cdev->ops->get_cur_state(cdev, buf);
+ ret = cdev->ops->get_cur_state(cdev, &state);
+ if (ret)
+ return ret;
+ return sprintf(buf, "%ld\n", state);
}
static ssize_t
const char *buf, size_t count)
{
struct thermal_cooling_device *cdev = to_cooling_device(dev);
- int state;
+ unsigned long state;
int result;
- if (!sscanf(buf, "%d\n", &state))
+ if (!sscanf(buf, "%ld\n", &state))
return -EINVAL;
- if (state < 0)
+ if ((long)state < 0)
return -EINVAL;
result = cdev->ops->set_cur_state(cdev, state);
static ssize_t
name_show(struct device *dev, struct device_attribute *attr, char *buf)
{
- struct thermal_hwmon_device *hwmon = dev->driver_data;
+ struct thermal_hwmon_device *hwmon = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", hwmon->type);
}
static DEVICE_ATTR(name, 0444, name_show, NULL);
static ssize_t
temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
{
+ long temperature;
+ int ret;
struct thermal_hwmon_attr *hwmon_attr
= container_of(attr, struct thermal_hwmon_attr, attr);
struct thermal_zone_device *tz
= container_of(hwmon_attr, struct thermal_zone_device,
temp_input);
- return tz->ops->get_temp(tz, buf);
+ ret = tz->ops->get_temp(tz, &temperature);
+
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%ld\n", temperature);
}
static ssize_t
struct thermal_zone_device *tz
= container_of(hwmon_attr, struct thermal_zone_device,
temp_crit);
+ long temperature;
+ int ret;
- return tz->ops->get_trip_temp(tz, 0, buf);
+ ret = tz->ops->get_trip_temp(tz, 0, &temperature);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%ld\n", temperature);
}
result = PTR_ERR(hwmon->device);
goto free_mem;
}
- hwmon->device->driver_data = hwmon;
+ dev_set_drvdata(hwmon->device, hwmon);
result = device_create_file(hwmon->device, &dev_attr_name);
if (result)
goto unregister_hwmon_device;
tz->temp_input.attr.attr.name = tz->temp_input.name;
tz->temp_input.attr.attr.mode = 0444;
tz->temp_input.attr.show = temp_input_show;
+ sysfs_attr_init(&tz->temp_input.attr.attr);
result = device_create_file(hwmon->device, &tz->temp_input.attr);
if (result)
goto unregister_hwmon_device;
tz->temp_crit.attr.attr.name = tz->temp_crit.name;
tz->temp_crit.attr.attr.mode = 0444;
tz->temp_crit.attr.show = temp_crit_show;
+ sysfs_attr_init(&tz->temp_crit.attr.attr);
result = device_create_file(hwmon->device,
&tz->temp_crit.attr);
if (result)
}
#endif
+static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
+ int delay)
+{
+ cancel_delayed_work(&(tz->poll_queue));
+
+ if (!delay)
+ return;
+
+ if (delay > 1000)
+ schedule_delayed_work(&(tz->poll_queue),
+ round_jiffies(msecs_to_jiffies(delay)));
+ else
+ schedule_delayed_work(&(tz->poll_queue),
+ msecs_to_jiffies(delay));
+}
+
+static void thermal_zone_device_passive(struct thermal_zone_device *tz,
+ int temp, int trip_temp, int trip)
+{
+ int trend = 0;
+ struct thermal_cooling_device_instance *instance;
+ struct thermal_cooling_device *cdev;
+ long state, max_state;
+
+ /*
+ * Above Trip?
+ * -----------
+ * Calculate the thermal trend (using the passive cooling equation)
+ * and modify the performance limit for all passive cooling devices
+ * accordingly. Note that we assume symmetry.
+ */
+ if (temp >= trip_temp) {
+ tz->passive = true;
+
+ trend = (tz->tc1 * (temp - tz->last_temperature)) +
+ (tz->tc2 * (temp - trip_temp));
+
+ /* Heating up? */
+ if (trend > 0) {
+ list_for_each_entry(instance, &tz->cooling_devices,
+ node) {
+ if (instance->trip != trip)
+ continue;
+ cdev = instance->cdev;
+ cdev->ops->get_cur_state(cdev, &state);
+ cdev->ops->get_max_state(cdev, &max_state);
+ if (state++ < max_state)
+ cdev->ops->set_cur_state(cdev, state);
+ }
+ } else if (trend < 0) { /* Cooling off? */
+ list_for_each_entry(instance, &tz->cooling_devices,
+ node) {
+ if (instance->trip != trip)
+ continue;
+ cdev = instance->cdev;
+ cdev->ops->get_cur_state(cdev, &state);
+ cdev->ops->get_max_state(cdev, &max_state);
+ if (state > 0)
+ cdev->ops->set_cur_state(cdev, --state);
+ }
+ }
+ return;
+ }
+
+ /*
+ * Below Trip?
+ * -----------
+ * Implement passive cooling hysteresis to slowly increase performance
+ * and avoid thrashing around the passive trip point. Note that we
+ * assume symmetry.
+ */
+ list_for_each_entry(instance, &tz->cooling_devices, node) {
+ if (instance->trip != trip)
+ continue;
+ cdev = instance->cdev;
+ cdev->ops->get_cur_state(cdev, &state);
+ cdev->ops->get_max_state(cdev, &max_state);
+ if (state > 0)
+ cdev->ops->set_cur_state(cdev, --state);
+ if (state == 0)
+ tz->passive = false;
+ }
+}
+
+static void thermal_zone_device_check(struct work_struct *work)
+{
+ struct thermal_zone_device *tz = container_of(work, struct
+ thermal_zone_device,
+ poll_queue.work);
+ thermal_zone_device_update(tz);
+}
/**
* thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
goto release_idr;
sprintf(dev->attr_name, "cdev%d_trip_point", dev->id);
+ sysfs_attr_init(&dev->attr.attr);
dev->attr.attr.name = dev->attr_name;
dev->attr.attr.mode = 0444;
dev->attr.show = thermal_cooling_device_trip_point_show;
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
- if (!strncmp(dev->bus_id, "thermal_zone", sizeof "thermal_zone" - 1)) {
+ if (!strncmp(dev_name(dev), "thermal_zone", sizeof "thermal_zone" - 1)) {
tz = to_thermal_zone(dev);
kfree(tz);
} else {
cdev->ops = ops;
cdev->device.class = &thermal_class;
cdev->devdata = devdata;
- sprintf(cdev->device.bus_id, "cooling_device%d", cdev->id);
+ dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
result = device_register(&cdev->device);
if (result) {
release_idr(&thermal_cdev_idr, &thermal_idr_lock, cdev->id);
EXPORT_SYMBOL(thermal_cooling_device_unregister);
/**
+ * thermal_zone_device_update - force an update of a thermal zone's state
+ * @ttz: the thermal zone to update
+ */
+
+void thermal_zone_device_update(struct thermal_zone_device *tz)
+{
+ int count, ret = 0;
+ long temp, trip_temp;
+ enum thermal_trip_type trip_type;
+ struct thermal_cooling_device_instance *instance;
+ struct thermal_cooling_device *cdev;
+
+ mutex_lock(&tz->lock);
+
+ if (tz->ops->get_temp(tz, &temp)) {
+ /* get_temp failed - retry it later */
+ printk(KERN_WARNING PREFIX "failed to read out thermal zone "
+ "%d\n", tz->id);
+ goto leave;
+ }
+
+ for (count = 0; count < tz->trips; count++) {
+ tz->ops->get_trip_type(tz, count, &trip_type);
+ tz->ops->get_trip_temp(tz, count, &trip_temp);
+
+ switch (trip_type) {
+ case THERMAL_TRIP_CRITICAL:
+ if (temp >= trip_temp) {
+ if (tz->ops->notify)
+ ret = tz->ops->notify(tz, count,
+ trip_type);
+ if (!ret) {
+ printk(KERN_EMERG
+ "Critical temperature reached (%ld C), shutting down.\n",
+ temp/1000);
+ orderly_poweroff(true);
+ }
+ }
+ break;
+ case THERMAL_TRIP_HOT:
+ if (temp >= trip_temp)
+ if (tz->ops->notify)
+ tz->ops->notify(tz, count, trip_type);
+ break;
+ case THERMAL_TRIP_ACTIVE:
+ list_for_each_entry(instance, &tz->cooling_devices,
+ node) {
+ if (instance->trip != count)
+ continue;
+
+ cdev = instance->cdev;
+
+ if (temp >= trip_temp)
+ cdev->ops->set_cur_state(cdev, 1);
+ else
+ cdev->ops->set_cur_state(cdev, 0);
+ }
+ break;
+ case THERMAL_TRIP_PASSIVE:
+ if (temp >= trip_temp || tz->passive)
+ thermal_zone_device_passive(tz, temp,
+ trip_temp, count);
+ break;
+ }
+ }
+
+ if (tz->forced_passive)
+ thermal_zone_device_passive(tz, temp, tz->forced_passive,
+ THERMAL_TRIPS_NONE);
+
+ tz->last_temperature = temp;
+
+ leave:
+ if (tz->passive)
+ thermal_zone_device_set_polling(tz, tz->passive_delay);
+ else if (tz->polling_delay)
+ thermal_zone_device_set_polling(tz, tz->polling_delay);
+ else
+ thermal_zone_device_set_polling(tz, 0);
+ mutex_unlock(&tz->lock);
+}
+EXPORT_SYMBOL(thermal_zone_device_update);
+
+/**
* thermal_zone_device_register - register a new thermal zone device
* @type: the thermal zone device type
* @trips: the number of trip points the thermal zone support
* @devdata: private device data
* @ops: standard thermal zone device callbacks
+ * @tc1: thermal coefficient 1 for passive calculations
+ * @tc2: thermal coefficient 2 for passive calculations
+ * @passive_delay: number of milliseconds to wait between polls when
+ * performing passive cooling
+ * @polling_delay: number of milliseconds to wait between polls when checking
+ * whether trip points have been crossed (0 for interrupt
+ * driven systems)
*
* thermal_zone_device_unregister() must be called when the device is no
- * longer needed.
+ * longer needed. The passive cooling formula uses tc1 and tc2 as described in
+ * section 11.1.5.1 of the ACPI specification 3.0.
*/
struct thermal_zone_device *thermal_zone_device_register(char *type,
int trips,
void *devdata, struct
thermal_zone_device_ops
- *ops)
+ *ops, int tc1, int
+ tc2,
+ int passive_delay,
+ int polling_delay)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *pos;
+ enum thermal_trip_type trip_type;
int result;
int count;
+ int passive = 0;
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
- sprintf(tz->device.bus_id, "thermal_zone%d", tz->id);
+ tz->tc1 = tc1;
+ tz->tc2 = tc2;
+ tz->passive_delay = passive_delay;
+ tz->polling_delay = polling_delay;
+
+ dev_set_name(&tz->device, "thermal_zone%d", tz->id);
result = device_register(&tz->device);
if (result) {
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
TRIP_POINT_ATTR_ADD(&tz->device, count, result);
if (result)
goto unregister;
+ tz->ops->get_trip_type(tz, count, &trip_type);
+ if (trip_type == THERMAL_TRIP_PASSIVE)
+ passive = 1;
}
+ if (!passive)
+ result = device_create_file(&tz->device,
+ &dev_attr_passive);
+
+ if (result)
+ goto unregister;
+
result = thermal_add_hwmon_sysfs(tz);
if (result)
goto unregister;
}
mutex_unlock(&thermal_list_lock);
+ INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
+
+ thermal_zone_device_update(tz);
+
if (!result)
return tz;
tz->ops->unbind(tz, cdev);
mutex_unlock(&thermal_list_lock);
+ thermal_zone_device_set_polling(tz, 0);
+
if (tz->type[0])
device_remove_file(&tz->device, &dev_attr_type);
device_remove_file(&tz->device, &dev_attr_temp);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff