Staging: rt3070: remove CONFIG_STA_SUPPORT ifdefs

[safe/jmp/linux-2.6] / drivers / staging / rt3070 / common / mlme.c

diff --git a/drivers/staging/rt3070/common/mlme.c b/drivers/staging/rt3070/common/mlme.c
index f483e3b..348d234 100644 (file)
--- a/drivers/staging/rt3070/common/mlme.c
+++ b/drivers/staging/rt3070/common/mlme.c
@@ -50,11 +50,9 @@ UCHAR        Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
 UCHAR   RALINK_OUI[]  = {0x00, 0x0c, 0x43};
 UCHAR   BROADCOM_OUI[]  = {0x00, 0x90, 0x4c};
 UCHAR   WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 UCHAR  PRE_N_HT_OUI[]  = {0x00, 0x90, 0x4c};
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 UCHAR RateSwitchTable[] = {
 // Item No.   Mode   Curr-MCS   TrainUp   TrainDown            // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
@@ -495,7 +493,6 @@ NDIS_STATUS MlmeInit(
                pAd->Mlme.bRunning = FALSE;
                NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
 
-#ifdef CONFIG_STA_SUPPORT
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                {
                        BssTableInit(&pAd->ScanTab);
@@ -512,9 +509,6 @@ NDIS_STATUS MlmeInit(
                        // state machine init
                        MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
                }
-#endif // CONFIG_STA_SUPPORT //
-
-
 
                ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc);
 
@@ -526,11 +520,6 @@ NDIS_STATUS MlmeInit(
 
                // software-based RX Antenna diversity
                RTMPInitTimer(pAd, &pAd->Mlme.RxAntEvalTimer, GET_TIMER_FUNCTION(AsicRxAntEvalTimeout), pAd, FALSE);
-
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
        } while (FALSE);
 
        DBGPRINT(RT_DEBUG_TRACE, ("<-- MLME Initialize\n"));
@@ -600,7 +589,6 @@ VOID MlmeHandler(
                        switch (Elem->Machine)
                        {
                                // STA state machines
-#ifdef CONFIG_STA_SUPPORT
                                case ASSOC_STATE_MACHINE:
                                        StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem);
                                        break;
@@ -622,8 +610,6 @@ VOID MlmeHandler(
                                case AIRONET_STATE_MACHINE:
                                        StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem);
                                        break;
-#endif // CONFIG_STA_SUPPORT //
-
                                case ACTION_STATE_MACHINE:
                                        StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem);
                                        break;
@@ -680,7 +666,6 @@ VOID MlmeHalt(
                AsicDisableSync(pAd);
        }
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                // Cancel pending timers
@@ -691,7 +676,6 @@ VOID MlmeHalt(
                RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,              &Cancelled);
                RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,                &Cancelled);
        }
-#endif // CONFIG_STA_SUPPORT //
 
        RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,               &Cancelled);
        RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer,              &Cancelled);
@@ -794,9 +778,6 @@ VOID MlmePeriodicExec(
        ULONG                   TxTotalCnt;
        PRTMP_ADAPTER   pAd = (RTMP_ADAPTER *)FunctionContext;
 
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
-
        // Do nothing if the driver is starting halt state.
        // This might happen when timer already been fired before cancel timer with mlmehalt
        if ((RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_HALT_IN_PROGRESS |
@@ -807,7 +788,6 @@ VOID MlmePeriodicExec(
 
        RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                // Do nothing if monitor mode is on
@@ -833,7 +813,6 @@ VOID MlmePeriodicExec(
                                }
                }
        }
-#endif // CONFIG_STA_SUPPORT //
 
        pAd->bUpdateBcnCntDone = FALSE;
 
@@ -847,7 +826,6 @@ VOID MlmePeriodicExec(
        // execute every 500ms
        if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
        {
-#ifdef CONFIG_STA_SUPPORT
                // perform dynamic tx rate switching based on past TX history
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                {
@@ -856,7 +834,6 @@ VOID MlmePeriodicExec(
                                && (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)))
                                MlmeDynamicTxRateSwitching(pAd);
                }
-#endif // CONFIG_STA_SUPPORT //
        }
 
        // Normal 1 second Mlme PeriodicExec.
@@ -932,14 +909,11 @@ VOID MlmePeriodicExec(
                        }
                }
 
-#ifdef CONFIG_STA_SUPPORT
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                        STAMlmePeriodicExec(pAd);
-#endif // CONFIG_STA_SUPPORT //
 
                MlmeResetRalinkCounters(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                {
                        {
@@ -963,7 +937,6 @@ VOID MlmePeriodicExec(
                                }
                        }
                }
-#endif // CONFIG_STA_SUPPORT //
 
                RT28XX_MLME_HANDLER(pAd);
        }
@@ -972,7 +945,6 @@ VOID MlmePeriodicExec(
        pAd->bUpdateBcnCntDone = FALSE;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 VOID STAMlmePeriodicExec(
        PRTMP_ADAPTER pAd)
 {
@@ -1263,7 +1235,6 @@ VOID MlmeAutoReconnectLastSSID(
                RT28XX_MLME_HANDLER(pAd);
        }
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
        ==========================================================================
@@ -1312,7 +1283,6 @@ VOID MlmeSelectTxRateTable(
                        break;
                }
 
-#ifdef CONFIG_STA_SUPPORT
                if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
                {
 #ifdef DOT11_N_SUPPORT
@@ -1373,7 +1343,6 @@ VOID MlmeSelectTxRateTable(
                        }
                        break;
                }
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef DOT11_N_SUPPORT
                //if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
@@ -1484,7 +1453,6 @@ VOID MlmeSelectTxRateTable(
 #ifdef DOT11_N_SUPPORT
 #endif // DOT11_N_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                {
 #ifdef DOT11_N_SUPPORT
@@ -1552,11 +1520,9 @@ VOID MlmeSelectTxRateTable(
                        DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
                                pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
                }
-#endif // CONFIG_STA_SUPPORT //
        } while(FALSE);
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
        ==========================================================================
        Description:
@@ -2685,8 +2651,6 @@ VOID MlmeSetPsmBit(
        csr4.field.AckCtsPsmBit = (psm == PWR_SAVE)? 1:0;
        RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 // IRQL = DISPATCH_LEVEL
 VOID MlmeSetTxPreamble(
@@ -2825,8 +2789,6 @@ VOID MlmeUpdateTxRates(
 
 //===========================================================================
 //===========================================================================
-
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                pHtPhy          = &pAd->StaCfg.HTPhyMode;
@@ -2843,7 +2805,6 @@ VOID MlmeUpdateTxRates(
                        MaxDesire = RATE_11;
                }
        }
-#endif // CONFIG_STA_SUPPORT //
 
        pAd->CommonCfg.MaxDesiredRate = MaxDesire;
        pMinHtPhy->word = 0;
@@ -2880,7 +2841,6 @@ VOID MlmeUpdateTxRates(
        }
 #endif
 
-#ifdef CONFIG_STA_SUPPORT
        if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
        {
                pSupRate = &pAd->StaActive.SupRate[0];
@@ -2889,7 +2849,6 @@ VOID MlmeUpdateTxRates(
                ExtRateLen = pAd->StaActive.ExtRateLen;
        }
        else
-#endif // CONFIG_STA_SUPPORT //
        {
                pSupRate = &pAd->CommonCfg.SupRate[0];
                pExtRate = &pAd->CommonCfg.ExtRate[0];
@@ -2974,10 +2933,10 @@ VOID MlmeUpdateTxRates(
        if (*auto_rate_cur_p)
        {
                short dbm = 0;
-#ifdef CONFIG_STA_SUPPORT
+
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                        dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
-#endif // CONFIG_STA_SUPPORT //
+
                if (bLinkUp == TRUE)
                        pAd->CommonCfg.TxRate = RATE_24;
                else
@@ -3141,7 +3100,6 @@ VOID MlmeUpdateHtTxRates(
 
        auto_rate_cur_p = NULL;
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                pDesireHtPhy    = &pAd->StaCfg.DesiredHtPhyInfo;
@@ -3152,9 +3110,7 @@ VOID MlmeUpdateHtTxRates(
 
                auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
        }
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
        if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
        {
                if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
@@ -3170,7 +3126,6 @@ VOID MlmeUpdateHtTxRates(
                        pMaxHtPhy->field.STBC = STBC_NONE;
        }
        else
-#endif // CONFIG_STA_SUPPORT //
        {
                if (pDesireHtPhy->bHtEnable == FALSE)
                        return;
@@ -3221,7 +3176,6 @@ VOID MlmeUpdateHtTxRates(
        pMinHtPhy->field.STBC = 0;
        pMinHtPhy->field.ShortGI = 0;
        //If STA assigns fixed rate. update to fixed here.
-#ifdef CONFIG_STA_SUPPORT
        if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff))
        {
                if (pDesireHtPhy->MCSSet[4] != 0)
@@ -3245,8 +3199,6 @@ VOID MlmeUpdateHtTxRates(
                                break;
                }
        }
-#endif // CONFIG_STA_SUPPORT //
-
 
        // Decide ht rate
        pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
@@ -3628,7 +3580,6 @@ VOID BssEntrySet(
        else
                pBss->QbssLoad.bValid = FALSE;
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                PEID_STRUCT     pEid;
@@ -3673,7 +3624,6 @@ VOID BssEntrySet(
                        pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
                }
        }
-#endif // CONFIG_STA_SUPPORT //
 }
 
 /*!
@@ -3780,7 +3730,6 @@ ULONG BssTableSetEntry(
        return Idx;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 // IRQL = DISPATCH_LEVEL
 VOID BssTableSsidSort(
        IN      PRTMP_ADAPTER   pAd,
@@ -4031,8 +3980,6 @@ VOID BssTableSortByRssi(
                }
        }
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 VOID BssCipherParse(
        IN OUT  PBSS_ENTRY      pBss)
@@ -4432,10 +4379,10 @@ VOID MgtMacHeaderInit(
 //             pHdr80211->FC.Type = BTYPE_CNTL;
        pHdr80211->FC.ToDs = ToDs;
        COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-#ifdef CONFIG_STA_SUPPORT
+
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
+
        COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
 }
 
@@ -4642,7 +4589,6 @@ BOOLEAN MlmeEnqueueForRecv(
                return FALSE;
        }
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
@@ -4651,7 +4597,6 @@ BOOLEAN MlmeEnqueueForRecv(
                        return FALSE;
                }
        }
-#endif // CONFIG_STA_SUPPORT //
 
        // OK, we got all the informations, it is time to put things into queue
        NdisAcquireSpinLock(&(Queue->Lock));
@@ -4719,14 +4664,10 @@ BOOLEAN MlmeDequeue(
 VOID   MlmeRestartStateMachine(
        IN      PRTMP_ADAPTER   pAd)
 {
-#ifdef CONFIG_STA_SUPPORT
        BOOLEAN                         Cancelled;
-#endif // CONFIG_STA_SUPPORT //
 
        DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
 
-
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                // Cancel all timer events
@@ -4738,7 +4679,6 @@ VOID      MlmeRestartStateMachine(
                RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,         &Cancelled);
                RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,           &Cancelled);
        }
-#endif // CONFIG_STA_SUPPORT //
 
        // Change back to original channel in case of doing scan
        AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
@@ -4747,7 +4687,6 @@ VOID      MlmeRestartStateMachine(
        // Resume MSDU which is turned off durning scan
        RTMPResumeMsduTransmission(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                // Set all state machines back IDLE
@@ -4758,8 +4697,6 @@ VOID      MlmeRestartStateMachine(
                pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
                pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
        }
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 /*! \brief     test if the MLME Queue is empty
@@ -4837,7 +4774,6 @@ VOID MlmeQueueDestroy(
  IRQL = DISPATCH_LEVEL
 
  */
-#ifdef CONFIG_STA_SUPPORT
 BOOLEAN MsgTypeSubst(
        IN PRTMP_ADAPTER  pAd,
        IN PFRAME_802_11 pFrame,
@@ -4947,7 +4883,6 @@ BOOLEAN MsgTypeSubst(
 
        return TRUE;
 }
-#endif // CONFIG_STA_SUPPORT //
 
 // ===========================================================================================
 // state_machine.c
@@ -6161,7 +6096,6 @@ VOID      AsicAntennaSelect(
                                        SHORT   realavgrssi1;
 
                                        // if no traffic then reset average rssi to trigger evaluation
-#ifdef CONFIG_STA_SUPPORT
                                        if (pAd->StaCfg.NumOfAvgRssiSample < 5)
                                        {
                                                pAd->RxAnt.Pair1LastAvgRssi = (-99);
@@ -6170,7 +6104,6 @@ VOID      AsicAntennaSelect(
                                        }
 
                                        pAd->StaCfg.NumOfAvgRssiSample = 0;
-#endif // CONFIG_STA_SUPPORT //
                                        realavgrssi1 = (pAd->RxAnt.Pair1AvgRssi[pAd->RxAnt.Pair1PrimaryRxAnt] >> 3);
 
                                        DBGPRINT(RT_DEBUG_TRACE,("Ant-realrssi0(%d), Lastrssi0(%d), EvaluateStableCnt=%d\n", realavgrssi1, pAd->RxAnt.Pair1LastAvgRssi, pAd->RxAnt.EvaluateStableCnt));
@@ -6480,7 +6413,6 @@ VOID AsicAdjustTxPower(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
        ==========================================================================
        Description:
@@ -6531,7 +6463,7 @@ VOID AsicForceWakeup(
     DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
     RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx);
 }
-#endif // CONFIG_STA_SUPPORT //
+
 /*
        ==========================================================================
        Description:
@@ -6709,7 +6641,7 @@ VOID AsicEnableBssSync(
 
        RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
 //     RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000);
-#ifdef CONFIG_STA_SUPPORT
+
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
@@ -6718,7 +6650,7 @@ VOID AsicEnableBssSync(
                csr.field.bBeaconGen  = 0; // do NOT generate BEACON
                csr.field.bTBTTEnable = 1;
        }
-#endif // CONFIG_STA_SUPPORT //
+
        RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
 }
 
@@ -6929,7 +6861,6 @@ VOID AsicSetEdcaParm(
                Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI];
                Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI];
 
-#ifdef CONFIG_STA_SUPPORT
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                {
                        // Tuning for Wi-Fi WMM S06
@@ -6954,7 +6885,6 @@ VOID AsicSetEdcaParm(
                        }
 #endif // RT30xx //
                }
-#endif // CONFIG_STA_SUPPORT //
 
                Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
                Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO];
@@ -6996,10 +6926,10 @@ VOID AsicSetEdcaParm(
                CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
                CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
                CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
+
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                        CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
+
                RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
 
                CwmaxCsr.word = 0;
@@ -7014,7 +6944,6 @@ VOID AsicSetEdcaParm(
                AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
                AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
 
-#ifdef CONFIG_STA_SUPPORT
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                {
                        // Tuning for Wi-Fi WMM S06
@@ -7034,9 +6963,7 @@ VOID AsicSetEdcaParm(
                        if (INFRA_ON(pAd))
                                CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE);
                }
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
                IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
                        AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
 #ifdef RT30xx
@@ -7046,7 +6973,7 @@ VOID AsicSetEdcaParm(
                        AifsnCsr.field.Aifsn2 = 0x2; //pEdcaParm->Aifsn[QID_AC_VI]; //for WiFi WMM S4-T04.
                }
 #endif // RT30xx //
-#endif // CONFIG_STA_SUPPORT //
+
                RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
                NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
@@ -7097,10 +7024,8 @@ VOID     AsicSetSlotTime(
        ULONG   SlotTime;
        UINT32  RegValue = 0;
 
-#ifdef CONFIG_STA_SUPPORT
        if (pAd->CommonCfg.Channel > 14)
                bUseShortSlotTime = TRUE;
-#endif // CONFIG_STA_SUPPORT //
 
        if (bUseShortSlotTime)
                OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
@@ -7109,27 +7034,23 @@ VOID    AsicSetSlotTime(
 
        SlotTime = (bUseShortSlotTime)? 9 : 20;
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                // force using short SLOT time for FAE to demo performance when TxBurst is ON
                if (pAd->CommonCfg.bEnableTxBurst)
                        SlotTime = 9;
        }
-#endif // CONFIG_STA_SUPPORT //
 
        //
        // For some reasons, always set it to short slot time.
        //
        // ToDo: Should consider capability with 11B
        //
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                if (pAd->StaCfg.BssType == BSS_ADHOC)
                        SlotTime = 20;
        }
-#endif // CONFIG_STA_SUPPORT //
 
        RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue);
        RegValue = RegValue & 0xFFFFFF00;
@@ -7650,7 +7571,6 @@ VOID      RTMPCheckRates(
        NdisMoveMemory(SupRate, NewRate, NewRateLen);
 }
 
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 BOOLEAN RTMPCheckChannel(
        IN PRTMP_ADAPTER pAd,
@@ -7798,7 +7718,6 @@ BOOLEAN   RTMPCheckHt(
        return TRUE;
 }
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 /*
        ========================================================================
@@ -8047,13 +7966,11 @@ VOID AsicEvaluateRxAnt(
                return;
 
 
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                //if (pAd->StaCfg.Psm == PWR_SAVE)
                //      return;
        }
-#endif // CONFIG_STA_SUPPORT //
 
        // two antenna selection mechanism- one is antenna diversity, the other is failed antenna remove
        // one is antenna diversity:there is only one antenna can rx and tx
@@ -8078,11 +7995,8 @@ VOID AsicEvaluateRxAnt(
        }
        else
        {
-
-#ifdef CONFIG_STA_SUPPORT
                if (pAd->StaCfg.Psm == PWR_SAVE)
                        return;
-#endif // CONFIG_STA_SUPPORT //
 
                RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
                BBPR3 &= (~0x18);
@@ -8099,8 +8013,7 @@ VOID AsicEvaluateRxAnt(
                        BBPR3 |= (0x0);
                }
                RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
+
                if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
                        )
                {
@@ -8143,10 +8056,8 @@ VOID AsicRxAntEvalTimeout(
        IN PVOID SystemSpecific3)
 {
        RTMP_ADAPTER    *pAd = (RTMP_ADAPTER *)FunctionContext;
-#ifdef CONFIG_STA_SUPPORT
        UCHAR                   BBPR3 = 0;
        CHAR                    larger = -127, rssi0, rssi1, rssi2;
-#endif // CONFIG_STA_SUPPORT //
 
        if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS |
                                                        fRTMP_ADAPTER_HALT_IN_PROGRESS  |
@@ -8159,8 +8070,6 @@ VOID AsicRxAntEvalTimeout(
                                                        )
                return;
 
-
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                //if (pAd->StaCfg.Psm == PWR_SAVE)
@@ -8249,9 +8158,6 @@ VOID AsicRxAntEvalTimeout(
                        RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
                }
        }
-
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 
@@ -8330,8 +8236,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 {
        BOOLEAN         result = TRUE;
 
-
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                // only associated STA counts
@@ -8342,9 +8246,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
                else
                        result = FALSE;
        }
-#endif // CONFIG_STA_SUPPORT //
-
-
 
        return result;
 }
@@ -8353,14 +8254,12 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 BOOLEAN RTMPAutoRateSwitchCheck(
        IN PRTMP_ADAPTER    pAd)
 {
-
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                if (pAd->StaCfg.bAutoTxRateSwitch)
                        return TRUE;
        }
-#endif // CONFIG_STA_SUPPORT //
+
        return FALSE;
 }
 
@@ -8386,13 +8285,10 @@ UCHAR RTMPStaFixedTxMode(
 {
        UCHAR   tx_mode = FIXED_TXMODE_HT;
 
-
-#ifdef CONFIG_STA_SUPPORT
        IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
        {
                tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
        }
-#endif // CONFIG_STA_SUPPORT //
 
        return tx_mode;
 }
@@ -8449,7 +8345,6 @@ VOID RTMPUpdateLegacyTxSetting(
        }
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
        ==========================================================================
        Description:
@@ -8581,7 +8476,6 @@ VOID AsicStaBbpTuning(
 
        }
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RTMPSetAGCInitValue(
        IN PRTMP_ADAPTER        pAd,