Blackfin SPI Driver: tweak magic spi dma sequence to get it working on BF54x

[safe/jmp/linux-2.6] / drivers / spi / spi_s3c24xx.c

diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 1c643c9..b3ebc1d 100644 (file)
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -19,17 +19,17 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
 #include <asm/io.h>
 #include <asm/dma.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/spi.h>
+#include <plat/regs-spi.h>
+#include <mach/spi.h>
 
 struct s3c24xx_spi {
        /* bitbang has to be first */
@@ -66,7 +66,7 @@ static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
 
 static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
 {
-       s3c2410_gpio_setpin(spi->pin_cs, pol);
+       gpio_set_value(spi->pin_cs, pol);
 }
 
 static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
@@ -236,6 +236,27 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev)
        return IRQ_HANDLED;
 }
 
+static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw)
+{
+       /* for the moment, permanently enable the clock */
+
+       clk_enable(hw->clk);
+
+       /* program defaults into the registers */
+
+       writeb(0xff, hw->regs + S3C2410_SPPRE);
+       writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+       writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+       if (hw->pdata) {
+               if (hw->set_cs == s3c24xx_spi_gpiocs)
+                       gpio_direction_output(hw->pdata->pin_cs, 1);
+
+               if (hw->pdata->gpio_setup)
+                       hw->pdata->gpio_setup(hw->pdata, 1);
+       }
+}
+
 static int __init s3c24xx_spi_probe(struct platform_device *pdev)
 {
        struct s3c2410_spi_info *pdata;
@@ -327,26 +348,27 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
                goto err_no_clk;
        }
 
-       /* for the moment, permanently enable the clock */
-
-       clk_enable(hw->clk);
-
-       /* program defaults into the registers */
-
-       writeb(0xff, hw->regs + S3C2410_SPPRE);
-       writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
-       writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
-
        /* setup any gpio we can */
 
        if (!pdata->set_cs) {
-               hw->set_cs = s3c24xx_spi_gpiocs;
+               if (pdata->pin_cs < 0) {
+                       dev_err(&pdev->dev, "No chipselect pin\n");
+                       goto err_register;
+               }
+
+               err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
+               if (err) {
+                       dev_err(&pdev->dev, "Failed to get gpio for cs\n");
+                       goto err_register;
+               }
 
-               s3c2410_gpio_setpin(pdata->pin_cs, 1);
-               s3c2410_gpio_cfgpin(pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+               hw->set_cs = s3c24xx_spi_gpiocs;
+               gpio_direction_output(pdata->pin_cs, 1);
        } else
                hw->set_cs = pdata->set_cs;
 
+       s3c24xx_spi_initialsetup(hw);
+
        /* register our spi controller */
 
        err = spi_bitbang_start(&hw->bitbang);
@@ -358,6 +380,9 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev)
        return 0;
 
  err_register:
+       if (hw->set_cs == s3c24xx_spi_gpiocs)
+               gpio_free(pdata->pin_cs);
+
        clk_disable(hw->clk);
        clk_put(hw->clk);
 
@@ -393,6 +418,9 @@ static int __exit s3c24xx_spi_remove(struct platform_device *dev)
        free_irq(hw->irq, hw);
        iounmap(hw->regs);
 
+       if (hw->set_cs == s3c24xx_spi_gpiocs)
+               gpio_free(hw->pdata->pin_cs);
+
        release_resource(hw->ioarea);
        kfree(hw->ioarea);
 
@@ -407,6 +435,9 @@ static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
 {
        struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
+       if (hw->pdata && hw->pdata->gpio_setup)
+               hw->pdata->gpio_setup(hw->pdata, 0);
+
        clk_disable(hw->clk);
        return 0;
 }
@@ -415,7 +446,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 {
        struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
 
-       clk_enable(hw->clk);
+       s3c24xx_spi_initialsetup(hw);
        return 0;
 }
 
@@ -425,7 +456,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev)
 #endif
 
 MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
        .remove         = __exit_p(s3c24xx_spi_remove),
        .suspend        = s3c24xx_spi_suspend,
        .resume         = s3c24xx_spi_resume,
@@ -437,12 +468,12 @@ static struct platform_driver s3c24xx_spidrv = {
 
 static int __init s3c24xx_spi_init(void)
 {
-        return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+        return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
 }
 
 static void __exit s3c24xx_spi_exit(void)
 {
-        platform_driver_unregister(&s3c24xx_spidrv);
+        platform_driver_unregister(&s3c24xx_spi_driver);
 }
 
 module_init(s3c24xx_spi_init);