V4L/DVB (6044): vp27smpx: clarify history of this source.

[safe/jmp/linux-2.6] / drivers / spi / spi_imx.c

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 656be4a..bd9177f 100644 (file)
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -1163,6 +1163,9 @@ msg_rejected:
        return -EINVAL;
 }
 
+/* the spi->mode bits understood by this driver: */
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
+
 /* On first setup bad values must free chip_data memory since will cause
    spi_new_device to fail. Bad value setup from protocol driver are simply not
    applied and notified to the calling driver. */
@@ -1174,6 +1177,12 @@ static int setup(struct spi_device *spi)
        u32 tmp;
        int status = 0;
 
+       if (spi->mode & ~MODEBITS) {
+               dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+                       spi->mode & ~MODEBITS);
+               return -EINVAL;
+       }
+
        /* Get controller data */
        chip_info = spi->controller_data;
 
@@ -1245,21 +1254,6 @@ static int setup(struct spi_device *spi)
 
        /* SPI mode */
        tmp = spi->mode;
-       if (tmp & SPI_LSB_FIRST) {
-               status = -EINVAL;
-               if (first_setup) {
-                       dev_err(&spi->dev,
-                               "setup - "
-                               "HW doesn't support LSB first transfer\n");
-                       goto err_first_setup;
-               } else {
-                       dev_err(&spi->dev,
-                               "setup - "
-                               "HW doesn't support LSB first transfer, "
-                               "default to MSB first\n");
-                       spi->mode &= ~SPI_LSB_FIRST;
-               }
-       }
        if (tmp & SPI_CS_HIGH) {
                u32_EDIT(chip->control,
                                SPI_CONTROL_SSPOL, SPI_CONTROL_SSPOL_ACT_HIGH);
@@ -1741,7 +1735,7 @@ static int spi_imx_resume(struct platform_device *pdev)
 
 static struct platform_driver driver = {
        .driver = {
-               .name = "imx-spi",
+               .name = "spi_imx",
                .bus = &platform_bus_type,
                .owner = THIS_MODULE,
        },