* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
return t->len - count;
}
+int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct spi_bitbang_cs *cs = spi->controller_state;
+ u8 bits_per_word;
+ u32 hz;
+
+ if (t) {
+ bits_per_word = t->bits_per_word;
+ hz = t->speed_hz;
+ } else {
+ bits_per_word = 0;
+ hz = 0;
+ }
+
+ /* spi_transfer level calls that work per-word */
+ if (!bits_per_word)
+ bits_per_word = spi->bits_per_word;
+ if (bits_per_word <= 8)
+ cs->txrx_bufs = bitbang_txrx_8;
+ else if (bits_per_word <= 16)
+ cs->txrx_bufs = bitbang_txrx_16;
+ else if (bits_per_word <= 32)
+ cs->txrx_bufs = bitbang_txrx_32;
+ else
+ return -EINVAL;
+
+ /* nsecs = (clock period)/2 */
+ if (!hz)
+ hz = spi->max_speed_hz;
+ if (hz) {
+ cs->nsecs = (1000000000/2) / hz;
+ if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer);
+
/**
* spi_bitbang_setup - default setup for per-word I/O loops
*/
{
struct spi_bitbang_cs *cs = spi->controller_state;
struct spi_bitbang *bitbang;
+ int retval;
+ unsigned long flags;
- if (!spi->max_speed_hz)
- return -EINVAL;
+ bitbang = spi_master_get_devdata(spi->master);
if (!cs) {
- cs = kzalloc(sizeof *cs, SLAB_KERNEL);
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
if (!cs)
return -ENOMEM;
spi->controller_state = cs;
}
- bitbang = spi_master_get_devdata(spi->master);
-
- if (!spi->bits_per_word)
- spi->bits_per_word = 8;
-
- /* spi_transfer level calls that work per-word */
- if (spi->bits_per_word <= 8)
- cs->txrx_bufs = bitbang_txrx_8;
- else if (spi->bits_per_word <= 16)
- cs->txrx_bufs = bitbang_txrx_16;
- else if (spi->bits_per_word <= 32)
- cs->txrx_bufs = bitbang_txrx_32;
- else
- return -EINVAL;
/* per-word shift register access, in hardware or bitbanging */
cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
if (!cs->txrx_word)
return -EINVAL;
- /* nsecs = (clock period)/2 */
- cs->nsecs = (1000000000/2) / (spi->max_speed_hz);
- if (cs->nsecs > MAX_UDELAY_MS * 1000)
- return -EINVAL;
+ retval = bitbang->setup_transfer(spi, NULL);
+ if (retval < 0)
+ return retval;
- dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
- __FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
- spi->bits_per_word, 2 * cs->nsecs);
+ dev_dbg(&spi->dev, "%s, %u nsec/bit\n", __func__, 2 * cs->nsecs);
/* NOTE we _need_ to call chipselect() early, ideally with adapter
* setup, unless the hardware defaults cooperate to avoid confusion
*/
/* deselect chip (low or high) */
- spin_lock(&bitbang->lock);
+ spin_lock_irqsave(&bitbang->lock, flags);
if (!bitbang->busy) {
bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
ndelay(cs->nsecs);
}
- spin_unlock(&bitbang->lock);
+ spin_unlock_irqrestore(&bitbang->lock, flags);
return 0;
}
/**
* spi_bitbang_cleanup - default cleanup for per-word I/O loops
*/
-void spi_bitbang_cleanup(const struct spi_device *spi)
+void spi_bitbang_cleanup(struct spi_device *spi)
{
kfree(spi->controller_state);
}
* Drivers can provide word-at-a-time i/o primitives, or provide
* transfer-at-a-time ones to leverage dma or fifo hardware.
*/
-static void bitbang_work(void *_bitbang)
+static void bitbang_work(struct work_struct *work)
{
- struct spi_bitbang *bitbang = _bitbang;
+ struct spi_bitbang *bitbang =
+ container_of(work, struct spi_bitbang, work);
unsigned long flags;
spin_lock_irqsave(&bitbang->lock, flags);
unsigned tmp;
unsigned cs_change;
int status;
+ int (*setup_transfer)(struct spi_device *,
+ struct spi_transfer *);
m = container_of(bitbang->queue.next, struct spi_message,
queue);
tmp = 0;
cs_change = 1;
status = 0;
+ setup_transfer = NULL;
list_for_each_entry (t, &m->transfers, transfer_list) {
- if (bitbang->shutdown) {
- status = -ESHUTDOWN;
- break;
+
+ /* override or restore speed and wordsize */
+ if (t->speed_hz || t->bits_per_word) {
+ setup_transfer = bitbang->setup_transfer;
+ if (!setup_transfer) {
+ status = -ENOPROTOOPT;
+ break;
+ }
+ }
+ if (setup_transfer) {
+ status = setup_transfer(spi, t);
+ if (status < 0)
+ break;
}
/* set up default clock polarity, and activate chip;
t->rx_dma = t->tx_dma = 0;
status = bitbang->txrx_bufs(spi, t);
}
+ if (status > 0)
+ m->actual_length += status;
if (status != t->len) {
- if (status > 0)
- status = -EMSGSIZE;
+ /* always report some kind of error */
+ if (status >= 0)
+ status = -EREMOTEIO;
break;
}
- m->actual_length += status;
status = 0;
/* protocol tweaks before next transfer */
m->status = status;
m->complete(m->context);
+ /* restore speed and wordsize */
+ if (setup_transfer)
+ setup_transfer(spi, NULL);
+
/* normally deactivate chipselect ... unless no error and
* cs_change has hinted that the next message will probably
* be for this chip too.
{
struct spi_bitbang *bitbang;
unsigned long flags;
+ int status = 0;
m->actual_length = 0;
m->status = -EINPROGRESS;
bitbang = spi_master_get_devdata(spi->master);
- if (bitbang->shutdown)
- return -ESHUTDOWN;
spin_lock_irqsave(&bitbang->lock, flags);
- list_add_tail(&m->queue, &bitbang->queue);
- queue_work(bitbang->workqueue, &bitbang->work);
+ if (!spi->max_speed_hz)
+ status = -ENETDOWN;
+ else {
+ list_add_tail(&m->queue, &bitbang->queue);
+ queue_work(bitbang->workqueue, &bitbang->work);
+ }
spin_unlock_irqrestore(&bitbang->lock, flags);
- return 0;
+ return status;
}
EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
* hardware that basically exposes a shift register) or per-spi_transfer
* (which takes better advantage of hardware like fifos or DMA engines).
*
- * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup and
- * spi_bitbang_cleanup to handle those spi master methods. Those methods are
- * the defaults if the bitbang->txrx_bufs routine isn't initialized.
+ * Drivers using per-word I/O loops should use (or call) spi_bitbang_setup,
+ * spi_bitbang_cleanup and spi_bitbang_setup_transfer to handle those spi
+ * master methods. Those methods are the defaults if the bitbang->txrx_bufs
+ * routine isn't initialized.
*
* This routine registers the spi_master, which will process requests in a
* dedicated task, keeping IRQs unblocked most of the time. To stop
if (!bitbang->master || !bitbang->chipselect)
return -EINVAL;
- INIT_WORK(&bitbang->work, bitbang_work, bitbang);
+ INIT_WORK(&bitbang->work, bitbang_work);
spin_lock_init(&bitbang->lock);
INIT_LIST_HEAD(&bitbang->queue);
+ if (!bitbang->master->mode_bits)
+ bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+
if (!bitbang->master->transfer)
bitbang->master->transfer = spi_bitbang_transfer;
if (!bitbang->txrx_bufs) {
bitbang->use_dma = 0;
bitbang->txrx_bufs = spi_bitbang_bufs;
if (!bitbang->master->setup) {
+ if (!bitbang->setup_transfer)
+ bitbang->setup_transfer =
+ spi_bitbang_setup_transfer;
bitbang->master->setup = spi_bitbang_setup;
bitbang->master->cleanup = spi_bitbang_cleanup;
}
/* this task is the only thing to touch the SPI bits */
bitbang->busy = 0;
bitbang->workqueue = create_singlethread_workqueue(
- bitbang->master->cdev.dev->bus_id);
+ dev_name(bitbang->master->dev.parent));
if (bitbang->workqueue == NULL) {
status = -EBUSY;
goto err1;
*/
int spi_bitbang_stop(struct spi_bitbang *bitbang)
{
- unsigned limit = 500;
-
- spin_lock_irq(&bitbang->lock);
- bitbang->shutdown = 0;
- while (!list_empty(&bitbang->queue) && limit--) {
- spin_unlock_irq(&bitbang->lock);
-
- dev_dbg(bitbang->master->cdev.dev, "wait for queue\n");
- msleep(10);
+ spi_unregister_master(bitbang->master);
- spin_lock_irq(&bitbang->lock);
- }
- spin_unlock_irq(&bitbang->lock);
- if (!list_empty(&bitbang->queue)) {
- dev_err(bitbang->master->cdev.dev, "queue didn't empty\n");
- return -EBUSY;
- }
+ WARN_ON(!list_empty(&bitbang->queue));
destroy_workqueue(bitbang->workqueue);
- spi_unregister_master(bitbang->master);
-
return 0;
}
EXPORT_SYMBOL_GPL(spi_bitbang_stop);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff