/*
- * File: drivers/spi/bfin5xx_spi.c
- * Maintainer:
- * Bryan Wu <bryan.wu@analog.com>
- * Original Author:
- * Luke Yang (Analog Devices Inc.)
- *
- * Created: March. 10th 2006
- * Description: SPI controller driver for Blackfin BF5xx
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * Modified:
- * March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
- * August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
- * July 17, 2007 add support for BF54x SPI0 controller (Bryan Wu)
- * July 30, 2007 add platfrom_resource interface to support multi-port
- * SPI controller (Bryan Wu)
+ * Blackfin On-Chip SPI Driver
*
* Copyright 2004-2007 Analog Devices Inc.
*
- * This program is free software ; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation ; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY ; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Enter bugs at http://blackfin.uclinux.org/
*
- * You should have received a copy of the GNU General Public License
- * along with this program ; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#include <linux/init.h>
#include <asm/dma.h>
#include <asm/portmux.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/cacheflush.h>
#define DRV_NAME "bfin-spi"
#define DRV_AUTHOR "Bryan Wu, Luke Yang"
-#define DRV_DESC "Blackfin BF5xx on-chip SPI Contoller Driver"
+#define DRV_DESC "Blackfin BF5xx on-chip SPI Controller Driver"
#define DRV_VERSION "1.0"
MODULE_AUTHOR(DRV_AUTHOR);
if ((sclk % (2 * speed_hz)) > 0)
spi_baud++;
+ if (spi_baud < MIN_SPI_BAUD_VAL)
+ spi_baud = MIN_SPI_BAUD_VAL;
+
return spi_baud;
}
udelay(chip->cs_chg_udelay);
}
-#define MAX_SPI_SSEL 7
-
/* stop controller and re-config current chip*/
-static int restore_state(struct driver_data *drv_data)
+static void restore_state(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
- int ret = 0;
/* Clear status and disable clock */
write_STAT(drv_data, BIT_STAT_CLR);
dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n");
/* Load the registers */
- write_BAUD(drv_data, chip->baud);
- chip->ctl_reg &= (~BIT_CTL_TIMOD);
- chip->ctl_reg |= (chip->width << 8);
write_CTRL(drv_data, chip->ctl_reg);
+ write_BAUD(drv_data, chip->baud);
bfin_spi_enable(drv_data);
cs_active(drv_data, chip);
-
- if (ret)
- dev_dbg(&drv_data->pdev->dev,
- ": request chip select number %d failed\n",
- chip->chip_select_num);
-
- return ret;
}
/* used to kick off transfer in rx mode */
dev_dbg(&drv_data->pdev->dev,
"cr8-s is 0x%x\n", read_STAT(drv_data));
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
while (read_STAT(drv_data) & BIT_STAT_TXS)
cpu_relax();
++drv_data->tx;
}
+
+ /* poll for SPI completion before return */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
}
static void u8_cs_chg_writer(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
while (read_STAT(drv_data) & BIT_STAT_TXS)
cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
cs_deactive(drv_data, chip);
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
- /* clear TDBR buffer before read(else it will be shifted out) */
- write_TDBR(drv_data, 0xFFFF);
+ while (drv_data->rx < drv_data->rx_end) {
+ cs_active(drv_data, chip);
+ read_RDBR(drv_data); /* kick off */
- cs_active(drv_data, chip);
- dummy_read(drv_data);
+ while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+ cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
- while (drv_data->rx < drv_data->rx_end - 1) {
+ *(u8 *) (drv_data->rx) = read_SHAW(drv_data);
cs_deactive(drv_data, chip);
- while (!(read_STAT(drv_data) & BIT_STAT_RXS))
- cpu_relax();
- cs_active(drv_data, chip);
- *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
++drv_data->rx;
}
- cs_deactive(drv_data, chip);
-
- while (!(read_STAT(drv_data) & BIT_STAT_RXS))
- cpu_relax();
- *(u8 *) (drv_data->rx) = read_SHAW(drv_data);
- ++drv_data->rx;
}
static void u8_duplex(struct driver_data *drv_data)
{
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
/* in duplex mode, clk is triggered by writing of TDBR */
while (drv_data->rx < drv_data->rx_end) {
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->rx < drv_data->rx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
dev_dbg(&drv_data->pdev->dev,
"cr16 is 0x%x\n", read_STAT(drv_data));
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
while ((read_STAT(drv_data) & BIT_STAT_TXS))
cpu_relax();
drv_data->tx += 2;
}
+
+ /* poll for SPI completion before return */
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
}
static void u16_cs_chg_writer(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
while ((read_STAT(drv_data) & BIT_STAT_TXS))
cpu_relax();
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+ cpu_relax();
cs_deactive(drv_data, chip);
static void u16_duplex(struct driver_data *drv_data)
{
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
/* in duplex mode, clk is triggered by writing of TDBR */
while (drv_data->tx < drv_data->tx_end) {
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
{
struct chip_data *chip = drv_data->cur_chip;
- /* poll for SPI completion before start */
- while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
- cpu_relax();
-
while (drv_data->tx < drv_data->tx_end) {
cs_active(drv_data, chip);
write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
- while (read_STAT(drv_data) & BIT_STAT_TXS)
+ while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
cpu_relax();
while (!(read_STAT(drv_data) & BIT_STAT_RXS))
cpu_relax();
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
- struct driver_data *drv_data = (struct driver_data *)dev_id;
+ struct driver_data *drv_data = dev_id;
struct chip_data *chip = drv_data->cur_chip;
struct spi_message *msg = drv_data->cur_msg;
+ unsigned long timeout;
+ unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel);
+ u16 spistat = read_STAT(drv_data);
+
+ dev_dbg(&drv_data->pdev->dev,
+ "in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
+ dmastat, spistat);
- dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler\n");
clear_dma_irqstat(drv_data->dma_channel);
/* Wait for DMA to complete */
cpu_relax();
}
+ dev_dbg(&drv_data->pdev->dev,
+ "in dma_irq_handler dmastat:0x%x spistat:0x%x\n",
+ dmastat, read_STAT(drv_data));
+
+ timeout = jiffies + HZ;
while (!(read_STAT(drv_data) & SPIF))
- cpu_relax();
+ if (!time_before(jiffies, timeout)) {
+ dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF");
+ break;
+ } else
+ cpu_relax();
- msg->actual_length += drv_data->len_in_bytes;
+ if ((dmastat & DMA_ERR) && (spistat & RBSY)) {
+ msg->state = ERROR_STATE;
+ dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n");
+ } else {
+ msg->actual_length += drv_data->len_in_bytes;
- if (drv_data->cs_change)
- cs_deactive(drv_data, chip);
+ if (drv_data->cs_change)
+ cs_deactive(drv_data, chip);
- /* Move to next transfer */
- msg->state = next_transfer(drv_data);
+ /* Move to next transfer */
+ msg->state = next_transfer(drv_data);
+ }
/* Schedule transfer tasklet */
tasklet_schedule(&drv_data->pump_transfers);
u8 width;
u16 cr, dma_width, dma_config;
u32 tranf_success = 1;
+ u8 full_duplex = 0;
/* Get current state information */
message = drv_data->cur_msg;
transfer = drv_data->cur_transfer;
chip = drv_data->cur_chip;
+
/*
* if msg is error or done, report it back using complete() callback
*/
/* Handle for abort */
if (message->state == ERROR_STATE) {
+ dev_dbg(&drv_data->pdev->dev, "transfer: we've hit an error\n");
message->status = -EIO;
giveback(drv_data);
return;
/* Handle end of message */
if (message->state == DONE_STATE) {
+ dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n");
message->status = 0;
giveback(drv_data);
return;
/* Delay if requested at end of transfer */
if (message->state == RUNNING_STATE) {
+ dev_dbg(&drv_data->pdev->dev, "transfer: still running ...\n");
previous = list_entry(transfer->transfer_list.prev,
struct spi_transfer, transfer_list);
if (previous->delay_usecs)
}
if (transfer->rx_buf != NULL) {
+ full_duplex = transfer->tx_buf != NULL;
drv_data->rx = transfer->rx_buf;
drv_data->rx_end = drv_data->rx + transfer->len;
dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n",
drv_data->len_in_bytes = transfer->len;
drv_data->cs_change = transfer->cs_change;
- width = chip->width;
+ /* Bits per word setup */
+ switch (transfer->bits_per_word) {
+ case 8:
+ drv_data->n_bytes = 1;
+ width = CFG_SPI_WORDSIZE8;
+ drv_data->read = chip->cs_change_per_word ?
+ u8_cs_chg_reader : u8_reader;
+ drv_data->write = chip->cs_change_per_word ?
+ u8_cs_chg_writer : u8_writer;
+ drv_data->duplex = chip->cs_change_per_word ?
+ u8_cs_chg_duplex : u8_duplex;
+ break;
+
+ case 16:
+ drv_data->n_bytes = 2;
+ width = CFG_SPI_WORDSIZE16;
+ drv_data->read = chip->cs_change_per_word ?
+ u16_cs_chg_reader : u16_reader;
+ drv_data->write = chip->cs_change_per_word ?
+ u16_cs_chg_writer : u16_writer;
+ drv_data->duplex = chip->cs_change_per_word ?
+ u16_cs_chg_duplex : u16_duplex;
+ break;
+
+ default:
+ /* No change, the same as default setting */
+ drv_data->n_bytes = chip->n_bytes;
+ width = chip->width;
+ drv_data->write = drv_data->tx ? chip->write : null_writer;
+ drv_data->read = drv_data->rx ? chip->read : null_reader;
+ drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
+ break;
+ }
+ cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
+ cr |= (width << 8);
+ write_CTRL(drv_data, cr);
+
if (width == CFG_SPI_WORDSIZE16) {
drv_data->len = (transfer->len) >> 1;
} else {
drv_data->len = transfer->len;
}
- drv_data->write = drv_data->tx ? chip->write : null_writer;
- drv_data->read = drv_data->rx ? chip->read : null_reader;
- drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
- dev_dbg(&drv_data->pdev->dev, "transfer: ",
- "drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+ dev_dbg(&drv_data->pdev->dev,
+ "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
drv_data->write, chip->write, null_writer);
/* speed and width has been set on per message */
message->state = RUNNING_STATE;
dma_config = 0;
+ /* Speed setup (surely valid because already checked) */
+ if (transfer->speed_hz)
+ write_BAUD(drv_data, hz_to_spi_baud(transfer->speed_hz));
+ else
+ write_BAUD(drv_data, chip->baud);
+
write_STAT(drv_data, BIT_STAT_CLR);
cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD));
cs_active(drv_data, chip);
width, transfer->len);
/*
- * Try to map dma buffer and do a dma transfer if
- * successful use different way to r/w according to
- * drv_data->cur_chip->enable_dma
+ * Try to map dma buffer and do a dma transfer. If successful use,
+ * different way to r/w according to the enable_dma settings and if
+ * we are not doing a full duplex transfer (since the hardware does
+ * not support full duplex DMA transfers).
*/
- if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
+ if (!full_duplex && drv_data->cur_chip->enable_dma
+ && drv_data->len > 6) {
+
+ unsigned long dma_start_addr, flags;
disable_dma(drv_data->dma_channel);
clear_dma_irqstat(drv_data->dma_channel);
- bfin_spi_disable(drv_data);
/* config dma channel */
dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n");
+ set_dma_x_count(drv_data->dma_channel, drv_data->len);
if (width == CFG_SPI_WORDSIZE16) {
- set_dma_x_count(drv_data->dma_channel, drv_data->len);
set_dma_x_modify(drv_data->dma_channel, 2);
dma_width = WDSIZE_16;
} else {
- set_dma_x_count(drv_data->dma_channel, drv_data->len);
set_dma_x_modify(drv_data->dma_channel, 1);
dma_width = WDSIZE_8;
}
enable_dma(drv_data->dma_channel);
/* start SPI transfer */
- write_CTRL(drv_data,
- (cr | CFG_SPI_DMAWRITE | BIT_CTL_ENABLE));
+ write_CTRL(drv_data, cr | BIT_CTL_TIMOD_DMA_TX);
/* just return here, there can only be one transfer
* in this mode
}
/* In dma mode, rx or tx must be NULL in one transfer */
+ dma_config = (RESTART | dma_width | DI_EN);
if (drv_data->rx != NULL) {
/* set transfer mode, and enable SPI */
- dev_dbg(&drv_data->pdev->dev, "doing DMA in.\n");
+ dev_dbg(&drv_data->pdev->dev, "doing DMA in to %p (size %zx)\n",
+ drv_data->rx, drv_data->len_in_bytes);
+
+ /* invalidate caches, if needed */
+ if (bfin_addr_dcachable((unsigned long) drv_data->rx))
+ invalidate_dcache_range((unsigned long) drv_data->rx,
+ (unsigned long) (drv_data->rx +
+ drv_data->len_in_bytes));
/* clear tx reg soformer data is not shifted out */
write_TDBR(drv_data, 0xFFFF);
- set_dma_x_count(drv_data->dma_channel, drv_data->len);
-
- /* start dma */
- dma_enable_irq(drv_data->dma_channel);
- dma_config = (WNR | RESTART | dma_width | DI_EN);
- set_dma_config(drv_data->dma_channel, dma_config);
- set_dma_start_addr(drv_data->dma_channel,
- (unsigned long)drv_data->rx);
- enable_dma(drv_data->dma_channel);
-
- /* start SPI transfer */
- write_CTRL(drv_data,
- (cr | CFG_SPI_DMAREAD | BIT_CTL_ENABLE));
+ dma_config |= WNR;
+ dma_start_addr = (unsigned long)drv_data->rx;
+ cr |= BIT_CTL_TIMOD_DMA_RX | BIT_CTL_SENDOPT;
} else if (drv_data->tx != NULL) {
dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n");
- /* start dma */
- dma_enable_irq(drv_data->dma_channel);
- dma_config = (RESTART | dma_width | DI_EN);
- set_dma_config(drv_data->dma_channel, dma_config);
- set_dma_start_addr(drv_data->dma_channel,
- (unsigned long)drv_data->tx);
- enable_dma(drv_data->dma_channel);
+ /* flush caches, if needed */
+ if (bfin_addr_dcachable((unsigned long) drv_data->tx))
+ flush_dcache_range((unsigned long) drv_data->tx,
+ (unsigned long) (drv_data->tx +
+ drv_data->len_in_bytes));
+
+ dma_start_addr = (unsigned long)drv_data->tx;
+ cr |= BIT_CTL_TIMOD_DMA_TX;
+
+ } else
+ BUG();
+
+ /* oh man, here there be monsters ... and i dont mean the
+ * fluffy cute ones from pixar, i mean the kind that'll eat
+ * your data, kick your dog, and love it all. do *not* try
+ * and change these lines unless you (1) heavily test DMA
+ * with SPI flashes on a loaded system (e.g. ping floods),
+ * (2) know just how broken the DMA engine interaction with
+ * the SPI peripheral is, and (3) have someone else to blame
+ * when you screw it all up anyways.
+ */
+ set_dma_start_addr(drv_data->dma_channel, dma_start_addr);
+ set_dma_config(drv_data->dma_channel, dma_config);
+ local_irq_save(flags);
+ enable_dma(drv_data->dma_channel);
+ write_CTRL(drv_data, cr);
+ dma_enable_irq(drv_data->dma_channel);
+ local_irq_restore(flags);
- /* start SPI transfer */
- write_CTRL(drv_data,
- (cr | CFG_SPI_DMAWRITE | BIT_CTL_ENABLE));
- }
} else {
/* IO mode write then read */
dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n");
- if (drv_data->tx != NULL && drv_data->rx != NULL) {
+ if (full_duplex) {
/* full duplex mode */
BUG_ON((drv_data->tx_end - drv_data->tx) !=
(drv_data->rx_end - drv_data->rx));
message->state = ERROR_STATE;
} else {
/* Update total byte transfered */
- message->actual_length += drv_data->len;
+ message->actual_length += drv_data->len_in_bytes;
/* Move to next transfer of this msg */
message->state = next_transfer(drv_data);
/* Setup the SSP using the per chip configuration */
drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
- if (restore_state(drv_data)) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- };
+ restore_state(drv_data);
list_del_init(&drv_data->cur_msg->queue);
#define MAX_SPI_SSEL 7
-static u16 ssel[3][MAX_SPI_SSEL] = {
+static u16 ssel[][MAX_SPI_SSEL] = {
{P_SPI0_SSEL1, P_SPI0_SSEL2, P_SPI0_SSEL3,
P_SPI0_SSEL4, P_SPI0_SSEL5,
P_SPI0_SSEL6, P_SPI0_SSEL7},
*/
if (chip->enable_dma && !drv_data->dma_requested) {
/* register dma irq handler */
- if (request_dma(drv_data->dma_channel, "BF53x_SPI_DMA") < 0) {
+ if (request_dma(drv_data->dma_channel, "BFIN_SPI_DMA") < 0) {
dev_dbg(&spi->dev,
"Unable to request BlackFin SPI DMA channel\n");
return -ENODEV;
}
if (set_dma_callback(drv_data->dma_channel,
- (void *)dma_irq_handler, drv_data) < 0) {
+ dma_irq_handler, drv_data) < 0) {
dev_dbg(&spi->dev, "Unable to set dma callback\n");
return -EPERM;
}
if ((chip->chip_select_num > 0)
&& (chip->chip_select_num <= spi->master->num_chipselect))
peripheral_request(ssel[spi->master->bus_num]
- [chip->chip_select_num-1], DRV_NAME);
+ [chip->chip_select_num-1], spi->modalias);
cs_deactive(drv_data, chip);
/* init messages workqueue */
INIT_WORK(&drv_data->pump_messages, pump_messages);
- drv_data->workqueue =
- create_singlethread_workqueue(drv_data->master->dev.parent->bus_id);
+ drv_data->workqueue = create_singlethread_workqueue(
+ dev_name(drv_data->master->dev.parent));
if (drv_data->workqueue == NULL)
return -EBUSY;
goto out_error_queue_alloc;
}
+ status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
+ if (status != 0) {
+ dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+ goto out_error_queue_alloc;
+ }
+
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
status = spi_register_master(master);
goto out_error_queue_alloc;
}
- status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
- if (status != 0) {
- dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
- goto out_error;
- }
-
dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n",
DRV_DESC, DRV_VERSION, drv_data->regs_base,
drv_data->dma_channel);
iounmap((void *) drv_data->regs_base);
out_error_ioremap:
out_error_get_res:
-out_error:
spi_master_put(master);
return status;
#define bfin5xx_spi_resume NULL
#endif /* CONFIG_PM */
-MODULE_ALIAS("bfin-spi-master"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:bfin-spi");
static struct platform_driver bfin5xx_spi_driver = {
.driver = {
.name = DRV_NAME,