{
int loops = 10000;
- while ((read_zsreg(zport, R0) & Rx_CH_AV) && loops--)
+ while ((read_zsreg(zport, R0) & Rx_CH_AV) && --loops)
read_zsdata(zport);
return loops;
}
struct zs_scc *scc = zport->scc;
int loops = 10000;
- while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && loops--) {
+ while (!(read_zsreg(zport, R0) & Tx_BUF_EMP) && --loops) {
zs_spin_unlock_cond_irq(&scc->zlock, irq);
udelay(2);
zs_spin_lock_cond_irq(&scc->zlock, irq);
struct zs_scc *scc = zport->scc;
int loops = 10000;
- while (!(read_zsreg(zport, R1) & ALL_SNT) && loops--) {
+ while (!(read_zsreg(zport, R1) & ALL_SNT) && --loops) {
zs_spin_unlock_cond_irq(&scc->zlock, irq);
udelay(2);
zs_spin_lock_cond_irq(&scc->zlock, irq);
uart_insert_char(uport, status, Rx_OVR, ch, flag);
}
- tty_flip_buffer_push(uport->info->port.tty);
+ tty_flip_buffer_push(uport->state->port.tty);
}
static void zs_raw_transmit_chars(struct zs_port *zport)
{
- struct circ_buf *xmit = &zport->port.info->xmit;
+ struct circ_buf *xmit = &zport->port.state->xmit;
/* XON/XOFF chars. */
if (zport->port.x_char) {
uport->icount.rng++;
if (delta)
- wake_up_interruptible(&uport->info->delta_msr_wait);
+ wake_up_interruptible(&uport->state->port.delta_msr_wait);
spin_lock(&scc->zlock);
}
zport->regs[1] &= ~RxINT_MASK;
zport->regs[1] |= RxINT_ALL | TxINT_ENAB | EXT_INT_ENAB;
zport->regs[3] |= RxENABLE;
- zport->regs[5] |= TxENAB;
zport->regs[15] |= BRKIE;
write_zsreg(zport, R1, zport->regs[1]);
write_zsreg(zport, R3, zport->regs[3]);
spin_lock_irqsave(&scc->zlock, flags);
- zport->regs[5] &= ~TxENAB;
zport->regs[3] &= ~RxENABLE;
write_zsreg(zport, R5, zport->regs[5]);
write_zsreg(zport, R3, zport->regs[3]);
spin_unlock_irqrestore(&scc->zlock, flags);
}
+/*
+ * Hack alert!
+ * Required solely so that the initial PROM-based console
+ * works undisturbed in parallel with this one.
+ */
+static void zs_pm(struct uart_port *uport, unsigned int state,
+ unsigned int oldstate)
+{
+ struct zs_port *zport = to_zport(uport);
+
+ if (state < 3)
+ zport->regs[5] |= TxENAB;
+ else
+ zport->regs[5] &= ~TxENAB;
+ write_zsreg(zport, R5, zport->regs[5]);
+}
+
static const char *zs_type(struct uart_port *uport)
{
.startup = zs_startup,
.shutdown = zs_shutdown,
.set_termios = zs_set_termios,
+ .pm = zs_pm,
.type = zs_type,
.release_port = zs_release_port,
.request_port = zs_request_port,
return ret;
zs_reset(zport);
+ zs_pm(uport, 0, -1);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);