V4L/DVB: tvp5150: support new vbi ops to set/get VBI format

[safe/jmp/linux-2.6] / drivers / serial / sunzilog.h

diff --git a/drivers/serial/sunzilog.h b/drivers/serial/sunzilog.h
index 7939b6d..5dec7b4 100644 (file)
--- a/drivers/serial/sunzilog.h
+++ b/drivers/serial/sunzilog.h
@@ -13,7 +13,8 @@ struct zilog_layout {
        struct zilog_channel channelA;
 };
 
-#define NUM_ZSREGS    16
+#define        NUM_ZSREGS      17
+#define        R7p             16 /* Written as R7 with P15 bit 0 set */
 
 /* Conversion routines to/from brg time constants from/to bits
  * per second.
@@ -127,6 +128,15 @@ struct zilog_layout {
 
 /* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
 
+/* Write Register 7' (ESCC Only) */
+#define        AUTO_TxFLAG     1       /* Automatic Tx SDLC Flag */
+#define        AUTO_EOM_RST    2       /* Automatic EOM Reset */
+#define        AUTOnRTS        4       /* Automatic /RTS pin deactivation */
+#define        RxFIFO_LVL      8       /* Receive FIFO interrupt level */
+#define        nDTRnREQ        0x10    /* /DTR/REQ timing */
+#define        TxFIFO_LVL      0x20    /* Transmit FIFO interrupt level */
+#define        EXT_RD_EN       0x40    /* Extended read register enable */
+
 /* Write Register 8 (transmit buffer) */
 
 /* Write Register 9 (Master interrupt control) */
@@ -135,6 +145,7 @@ struct zilog_layout {
 #define        DLC     4       /* Disable Lower Chain */
 #define        MIE     8       /* Master Interrupt Enable */
 #define        STATHI  0x10    /* Status high */
+#define        SWIACK  0x20    /* Software Interrupt Ack (not on NMOS) */
 #define        NORESET 0       /* No reset on write to R9 */
 #define        CHRB    0x40    /* Reset channel B */
 #define        CHRA    0x80    /* Reset channel A */
@@ -187,7 +198,9 @@ struct zilog_layout {
 #define        SNRZI   0xe0    /* Set NRZI mode */
 
 /* Write Register 15 (external/status interrupt control) */
+#define        WR7pEN  1       /* WR7' Enable (ESCC only) */
 #define        ZCIE    2       /* Zero count IE */
+#define        FIFOEN  4       /* FIFO Enable (ESCC only) */
 #define        DCDIE   8       /* DCD IE */
 #define        SYNCIE  0x10    /* Sync/hunt IE */
 #define        CTSIE   0x20    /* CTS IE */
@@ -241,6 +254,10 @@ struct zilog_layout {
 #define        CHATxIP 0x10            /* Channel A Tx IP */
 #define        CHARxIP 0x20            /* Channel A Rx IP */
 
+/* Read Register 6 (LSB frame byte count [Not on NMOS]) */
+
+/* Read Register 7 (MSB frame byte count and FIFO status [Not on NMOS]) */
+
 /* Read Register 8 (receive data register) */
 
 /* Read Register 10  (misc status bits) */