* C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
* work there.
*
- * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2002, 2006, 2007 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/serio.h>
#endif
#include <linux/init.h>
+#include <linux/of_device.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/prom.h>
-#include <asm/of_device.h>
#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
readb(&((__channel)->control))
#endif
-static int num_sunzilog;
-#define NUM_SUNZILOG num_sunzilog
-#define NUM_CHANNELS (NUM_SUNZILOG * 2)
-
-#define KEYBOARD_LINE 0x2
-#define MOUSE_LINE 0x3
-
#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
#define SUNZILOG_FLAG_REGS_HELD 0x00000040
#define SUNZILOG_FLAG_TX_STOPPED 0x00000080
#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
+#define SUNZILOG_FLAG_ESCC 0x00000200
+#define SUNZILOG_FLAG_ISR_HANDLER 0x00000400
unsigned int cflag;
/* This function must only be called when the TX is not busy. The UART
* port lock must be held and local interrupts disabled.
*/
-static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
+static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
{
int i;
+ int escc;
+ unsigned char r15;
/* Let pending transmits finish. */
for (i = 0; i < 1000; i++) {
write_zsreg(channel, R14, regs[R14]);
/* External status interrupt control. */
- write_zsreg(channel, R15, regs[R15]);
+ write_zsreg(channel, R15, (regs[R15] | WR7pEN) & ~FIFOEN);
+
+ /* ESCC Extension Register */
+ r15 = read_zsreg(channel, R15);
+ if (r15 & 0x01) {
+ write_zsreg(channel, R7, regs[R7p]);
+
+ /* External status interrupt and FIFO control. */
+ write_zsreg(channel, R15, regs[R15] & ~WR7pEN);
+ escc = 1;
+ } else {
+ /* Clear FIFO bit case it is an issue */
+ regs[R15] &= ~FIFOEN;
+ escc = 0;
+ }
/* Reset external status interrupts. */
- write_zsreg(channel, R0, RES_EXT_INT);
- write_zsreg(channel, R0, RES_EXT_INT);
+ write_zsreg(channel, R0, RES_EXT_INT); /* First Latch */
+ write_zsreg(channel, R0, RES_EXT_INT); /* Second Latch */
/* Rewrite R3/R5, this time without enables masked. */
write_zsreg(channel, R3, regs[R3]);
/* Rewrite R1, this time without IRQ enabled masked. */
write_zsreg(channel, R1, regs[R1]);
+
+ return escc;
}
/* Reprogram the Zilog channel HW registers with the copies found in the
}
static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
- unsigned char ch, int is_break,
- struct pt_regs *regs)
+ unsigned char ch, int is_break)
{
if (ZS_IS_KEYB(up)) {
/* Stop-A is handled by drivers/char/keyboard.c now. */
#ifdef CONFIG_SERIO
if (up->serio_open)
- serio_interrupt(&up->serio, ch, 0, regs);
+ serio_interrupt(&up->serio, ch, 0);
#endif
} else if (ZS_IS_MOUSE(up)) {
int ret = suncore_mouse_baud_detection(ch, is_break);
case 0:
#ifdef CONFIG_SERIO
if (up->serio_open)
- serio_interrupt(&up->serio, ch, 0, regs);
+ serio_interrupt(&up->serio, ch, 0);
#endif
break;
};
static struct tty_struct *
sunzilog_receive_chars(struct uart_sunzilog_port *up,
- struct zilog_channel __iomem *channel,
- struct pt_regs *regs)
+ struct zilog_channel __iomem *channel)
{
struct tty_struct *tty;
unsigned char ch, r1, flag;
tty = NULL;
- if (up->port.info != NULL && /* Unopened serial console */
- up->port.info->tty != NULL) /* Keyboard || mouse */
- tty = up->port.info->tty;
+ if (up->port.state != NULL && /* Unopened serial console */
+ up->port.state->port.tty != NULL) /* Keyboard || mouse */
+ tty = up->port.state->port.tty;
for (;;) {
ch &= up->parity_mask;
if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
- sunzilog_kbdms_receive_chars(up, ch, 0, regs);
+ sunzilog_kbdms_receive_chars(up, ch, 0);
continue;
}
if (tty == NULL) {
- uart_handle_sysrq_char(&up->port, ch, regs);
+ uart_handle_sysrq_char(&up->port, ch);
continue;
}
else if (r1 & CRC_ERR)
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&up->port, ch, regs))
+ if (uart_handle_sysrq_char(&up->port, ch))
continue;
if (up->port.ignore_status_mask == 0xff ||
}
static void sunzilog_status_handle(struct uart_sunzilog_port *up,
- struct zilog_channel __iomem *channel,
- struct pt_regs *regs)
+ struct zilog_channel __iomem *channel)
{
unsigned char status;
if (status & BRK_ABRT) {
if (ZS_IS_MOUSE(up))
- sunzilog_kbdms_receive_chars(up, 0, 1, regs);
+ sunzilog_kbdms_receive_chars(up, 0, 1);
if (ZS_IS_CONS(up)) {
/* Wait for BREAK to deassert to avoid potentially
* confusing the PROM.
uart_handle_cts_change(&up->port,
(status & CTS));
- wake_up_interruptible(&up->port.info->delta_msr_wait);
+ wake_up_interruptible(&up->port.state->port.delta_msr_wait);
}
up->prev_status = status;
return;
}
- if (up->port.info == NULL)
+ if (up->port.state == NULL)
goto ack_tx_int;
- xmit = &up->port.info->xmit;
+ xmit = &up->port.state->xmit;
if (uart_circ_empty(xmit))
goto ack_tx_int;
ZS_WSYNC(channel);
}
-static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
{
struct uart_sunzilog_port *up = dev_id;
ZS_WSYNC(channel);
if (r3 & CHARxIP)
- tty = sunzilog_receive_chars(up, channel, regs);
+ tty = sunzilog_receive_chars(up, channel);
if (r3 & CHAEXT)
- sunzilog_status_handle(up, channel, regs);
+ sunzilog_status_handle(up, channel);
if (r3 & CHATxIP)
sunzilog_transmit_chars(up, channel);
}
ZS_WSYNC(channel);
if (r3 & CHBRxIP)
- tty = sunzilog_receive_chars(up, channel, regs);
+ tty = sunzilog_receive_chars(up, channel);
if (r3 & CHBEXT)
- sunzilog_status_handle(up, channel, regs);
+ sunzilog_status_handle(up, channel);
if (r3 & CHBTxIP)
sunzilog_transmit_chars(up, channel);
}
port->icount.tx++;
port->x_char = 0;
} else {
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
writeb(xmit->buf[xmit->tail], &channel->data);
ZSDELAY();
up->curregs[R15] = new_reg;
/* NOTE: Not subject to 'transmitter active' rule. */
- write_zsreg(channel, R15, up->curregs[R15]);
+ write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
}
}
up->curregs[R14] = BRSRC | BRENAB;
/* Character size, stop bits, and parity. */
- up->curregs[3] &= ~RxN_MASK;
- up->curregs[5] &= ~TxN_MASK;
+ up->curregs[R3] &= ~RxN_MASK;
+ up->curregs[R5] &= ~TxN_MASK;
switch (cflag & CSIZE) {
case CS5:
- up->curregs[3] |= Rx5;
- up->curregs[5] |= Tx5;
+ up->curregs[R3] |= Rx5;
+ up->curregs[R5] |= Tx5;
up->parity_mask = 0x1f;
break;
case CS6:
- up->curregs[3] |= Rx6;
- up->curregs[5] |= Tx6;
+ up->curregs[R3] |= Rx6;
+ up->curregs[R5] |= Tx6;
up->parity_mask = 0x3f;
break;
case CS7:
- up->curregs[3] |= Rx7;
- up->curregs[5] |= Tx7;
+ up->curregs[R3] |= Rx7;
+ up->curregs[R5] |= Tx7;
up->parity_mask = 0x7f;
break;
case CS8:
default:
- up->curregs[3] |= Rx8;
- up->curregs[5] |= Tx8;
+ up->curregs[R3] |= Rx8;
+ up->curregs[R5] |= Tx8;
up->parity_mask = 0xff;
break;
};
- up->curregs[4] &= ~0x0c;
+ up->curregs[R4] &= ~0x0c;
if (cflag & CSTOPB)
- up->curregs[4] |= SB2;
+ up->curregs[R4] |= SB2;
else
- up->curregs[4] |= SB1;
+ up->curregs[R4] |= SB1;
if (cflag & PARENB)
- up->curregs[4] |= PAR_ENAB;
+ up->curregs[R4] |= PAR_ENAB;
else
- up->curregs[4] &= ~PAR_ENAB;
+ up->curregs[R4] &= ~PAR_ENAB;
if (!(cflag & PARODD))
- up->curregs[4] |= PAR_EVEN;
+ up->curregs[R4] |= PAR_EVEN;
else
- up->curregs[4] &= ~PAR_EVEN;
+ up->curregs[R4] &= ~PAR_EVEN;
up->port.read_status_mask = Rx_OVR;
if (iflag & INPCK)
/* The port lock is not held. */
static void
-sunzilog_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
unsigned long flags;
static const char *sunzilog_type(struct uart_port *port)
{
- return "zs";
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+
+ return (up->flags & SUNZILOG_FLAG_ESCC) ? "zs (ESCC)" : "zs";
}
/* We do not request/release mappings of the registers here, this
.verify_port = sunzilog_verify_port,
};
+static int uart_chip_count;
static struct uart_sunzilog_port *sunzilog_port_table;
static struct zilog_layout __iomem **sunzilog_chip_regs;
static struct uart_driver sunzilog_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyS",
+ .driver_name = "sunzilog",
.dev_name = "ttyS",
.major = TTY_MAJOR,
};
-static int __init sunzilog_alloc_tables(void)
+static int __init sunzilog_alloc_tables(int num_sunzilog)
{
struct uart_sunzilog_port *up;
unsigned long size;
+ int num_channels = num_sunzilog * 2;
int i;
- size = NUM_CHANNELS * sizeof(struct uart_sunzilog_port);
+ size = num_channels * sizeof(struct uart_sunzilog_port);
sunzilog_port_table = kzalloc(size, GFP_KERNEL);
if (!sunzilog_port_table)
return -ENOMEM;
- for (i = 0; i < NUM_CHANNELS; i++) {
+ for (i = 0; i < num_channels; i++) {
up = &sunzilog_port_table[i];
spin_lock_init(&up->port.lock);
if (i == 0)
sunzilog_irq_chain = up;
- if (i < NUM_CHANNELS - 1)
+ if (i < num_channels - 1)
up->next = up + 1;
else
up->next = NULL;
}
- size = NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *);
+ size = num_sunzilog * sizeof(struct zilog_layout __iomem *);
sunzilog_chip_regs = kzalloc(size, GFP_KERNEL);
if (!sunzilog_chip_regs) {
kfree(sunzilog_port_table);
static void sunzilog_putchar(struct uart_port *port, int ch)
{
- struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
int loops = ZS_PUT_CHAR_MAX_DELAY;
/* This is a timed polling loop so do not switch the explicit
{
struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
unsigned long flags;
+ int locked = 1;
+
+ local_irq_save(flags);
+ if (up->port.sysrq) {
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&up->port.lock);
+ } else
+ spin_lock(&up->port.lock);
- spin_lock_irqsave(&up->port.lock, flags);
uart_console_write(&up->port, s, count, sunzilog_putchar);
udelay(2);
- spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (locked)
+ spin_unlock(&up->port.lock);
+ local_irq_restore(flags);
}
static int __init sunzilog_console_setup(struct console *con, char *options)
unsigned long flags;
int baud, brg;
+ if (up->port.type != PORT_SUNZILOG)
+ return -1;
+
printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
(sunzilog_reg.minor - 64) + con->index, con->index);
spin_lock_irqsave(&up->port.lock, flags);
- up->curregs[R15] = BRKIE;
+ up->curregs[R15] |= BRKIE;
sunzilog_convert_to_zs(up, con->cflag, 0, brg);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
return 0;
}
-static struct console sunzilog_console = {
+static struct console sunzilog_console_ops = {
.name = "ttyS",
.write = sunzilog_console_write,
.device = uart_console_device,
static inline struct console *SUNZILOG_CONSOLE(void)
{
- int i;
-
- if (con_is_present())
- return NULL;
-
- for (i = 0; i < NUM_CHANNELS; i++) {
- int this_minor = sunzilog_reg.minor + i;
-
- if ((this_minor - 64) == (serial_console - 1))
- break;
- }
- if (i == NUM_CHANNELS)
- return NULL;
-
- sunzilog_console.index = i;
- sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
-
- return &sunzilog_console;
+ return &sunzilog_console_ops;
}
#else
#define SUNZILOG_CONSOLE() (NULL)
#endif
-static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
+static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up)
{
int baud, brg;
- if (channel == KEYBOARD_LINE) {
- up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
up->cflag = B1200 | CS8 | CLOCAL | CREAD;
baud = 1200;
} else {
- up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
baud = 4800;
}
- up->curregs[R15] = BRKIE;
+ up->curregs[R15] |= BRKIE;
brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
sunzilog_convert_to_zs(up, up->cflag, 0, brg);
sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
}
#ifdef CONFIG_SERIO
-static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up)
{
struct serio *serio = &up->serio;
serio->port_data = up;
serio->id.type = SERIO_RS232;
- if (channel == KEYBOARD_LINE) {
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
serio->id.proto = SERIO_SUNKBD;
strlcpy(serio->name, "zskbd", sizeof(serio->name));
} else {
strlcpy(serio->name, "zsms", sizeof(serio->name));
}
strlcpy(serio->phys,
- (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+ ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
+ "zs/serio0" : "zs/serio1"),
sizeof(serio->phys));
serio->write = sunzilog_serio_write;
}
#endif
-static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
+static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
{
struct zilog_channel __iomem *channel;
unsigned long flags;
(void) read_zsreg(channel, R0);
}
- if (up->port.line == KEYBOARD_LINE ||
- up->port.line == MOUSE_LINE) {
- sunzilog_init_kbdms(up, up->port.line);
- up->curregs[R9] |= (NV | MIE);
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE)) {
+ up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+ up->curregs[R3] = RxENAB | Rx8;
+ up->curregs[R5] = TxENAB | Tx8;
+ up->curregs[R6] = 0x00; /* SDLC Address */
+ up->curregs[R7] = 0x7E; /* SDLC Flag */
+ up->curregs[R9] = NV;
+ up->curregs[R7p] = 0x00;
+ sunzilog_init_kbdms(up);
+ /* Only enable interrupts if an ISR handler available */
+ if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+ up->curregs[R9] |= MIE;
write_zsreg(channel, R9, up->curregs[R9]);
} else {
/* Normal serial TTY. */
up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
up->curregs[R3] = RxENAB | Rx8;
up->curregs[R5] = TxENAB | Tx8;
- up->curregs[R9] = NV | MIE;
+ up->curregs[R6] = 0x00; /* SDLC Address */
+ up->curregs[R7] = 0x7E; /* SDLC Flag */
+ up->curregs[R9] = NV;
up->curregs[R10] = NRZ;
up->curregs[R11] = TCBR | RCBR;
baud = 9600;
up->curregs[R12] = (brg & 0xff);
up->curregs[R13] = (brg >> 8) & 0xff;
up->curregs[R14] = BRSRC | BRENAB;
- __load_zsregs(channel, up->curregs);
+ up->curregs[R15] = FIFOEN; /* Use FIFO if on ESCC */
+ up->curregs[R7p] = TxFIFO_LVL | RxFIFO_LVL;
+ if (__load_zsregs(channel, up->curregs)) {
+ up->flags |= SUNZILOG_FLAG_ESCC;
+ }
+ /* Only enable interrupts if an ISR handler available */
+ if (up->flags & SUNZILOG_FLAG_ISR_HANDLER)
+ up->curregs[R9] |= MIE;
write_zsreg(channel, R9, up->curregs[R9]);
}
spin_unlock_irqrestore(&up->port.lock, flags);
#ifdef CONFIG_SERIO
- if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE)
- sunzilog_register_serio(up, up->port.line);
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE))
+ sunzilog_register_serio(up);
#endif
}
-static int __devinit zs_get_instance(struct device_node *dp)
-{
- int ret;
-
- ret = of_getintprop_default(dp, "slave", -1);
- if (ret != -1)
- return ret;
-
- if (of_find_property(dp, "keyboard", NULL))
- ret = 1;
- else
- ret = 0;
-
- return ret;
-}
-
static int zilog_irq = -1;
static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
{
+ static int kbm_inst, uart_inst;
+ int inst;
struct uart_sunzilog_port *up;
struct zilog_layout __iomem *rp;
- int inst = zs_get_instance(op->node);
+ int keyboard_mouse = 0;
int err;
+ if (of_find_property(op->node, "keyboard", NULL))
+ keyboard_mouse = 1;
+
+ /* uarts must come before keyboards/mice */
+ if (keyboard_mouse)
+ inst = uart_chip_count + kbm_inst;
+ else
+ inst = uart_inst;
+
sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
sizeof(struct zilog_layout),
"zs");
rp = sunzilog_chip_regs[inst];
- if (zilog_irq == -1) {
+ if (zilog_irq == -1)
zilog_irq = op->irqs[0];
- err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
- "zs", sunzilog_irq_chain);
- if (err) {
- of_iounmap(rp, sizeof(struct zilog_layout));
-
- return err;
- }
- }
up = &sunzilog_port_table[inst * 2];
up[0].port.line = (inst * 2) + 0;
up[0].port.dev = &op->dev;
up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
- if (inst == 1)
+ if (keyboard_mouse)
up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
sunzilog_init_hw(&up[0]);
up[1].port.line = (inst * 2) + 1;
up[1].port.dev = &op->dev;
up[1].flags |= 0;
- if (inst == 1)
+ if (keyboard_mouse)
up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
sunzilog_init_hw(&up[1]);
- if (inst != 1) {
+ if (!keyboard_mouse) {
+ if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+ &sunzilog_reg, up[0].port.line))
+ up->flags |= SUNZILOG_FLAG_IS_CONS;
err = uart_add_one_port(&sunzilog_reg, &up[0].port);
if (err) {
- of_iounmap(rp, sizeof(struct zilog_layout));
+ of_iounmap(&op->resource[0],
+ rp, sizeof(struct zilog_layout));
return err;
}
+ if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node,
+ &sunzilog_reg, up[1].port.line))
+ up->flags |= SUNZILOG_FLAG_IS_CONS;
err = uart_add_one_port(&sunzilog_reg, &up[1].port);
if (err) {
uart_remove_one_port(&sunzilog_reg, &up[0].port);
- of_iounmap(rp, sizeof(struct zilog_layout));
+ of_iounmap(&op->resource[0],
+ rp, sizeof(struct zilog_layout));
return err;
}
+ uart_inst++;
+ } else {
+ printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) "
+ "is a %s\n",
+ dev_name(&op->dev),
+ (unsigned long long) up[0].port.mapbase,
+ op->irqs[0], sunzilog_type(&up[0].port));
+ printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
+ "is a %s\n",
+ dev_name(&op->dev),
+ (unsigned long long) up[1].port.mapbase,
+ op->irqs[0], sunzilog_type(&up[1].port));
+ kbm_inst++;
}
dev_set_drvdata(&op->dev, &up[0]);
uart_remove_one_port(&sunzilog_reg, &up->port);
}
-static int __devexit zs_remove(struct of_device *dev)
+static int __devexit zs_remove(struct of_device *op)
{
- struct uart_sunzilog_port *up = dev_get_drvdata(&dev->dev);
+ struct uart_sunzilog_port *up = dev_get_drvdata(&op->dev);
struct zilog_layout __iomem *regs;
zs_remove_one(&up[0]);
zs_remove_one(&up[1]);
regs = sunzilog_chip_regs[up[0].port.line / 2];
- of_iounmap(regs, sizeof(struct zilog_layout));
+ of_iounmap(&op->resource[0], regs, sizeof(struct zilog_layout));
- dev_set_drvdata(&dev->dev, NULL);
+ dev_set_drvdata(&op->dev, NULL);
return 0;
}
-static struct of_device_id zs_match[] = {
+static const struct of_device_id zs_match[] = {
{
.name = "zs",
},
static int __init sunzilog_init(void)
{
struct device_node *dp;
- int err, uart_count;
-
- NUM_SUNZILOG = 0;
- for_each_node_by_name(dp, "zs")
- NUM_SUNZILOG++;
+ int err;
+ int num_keybms = 0;
+ int num_sunzilog = 0;
- uart_count = 0;
- if (NUM_SUNZILOG) {
- int uart_count;
+ for_each_node_by_name(dp, "zs") {
+ num_sunzilog++;
+ if (of_find_property(dp, "keyboard", NULL))
+ num_keybms++;
+ }
- err = sunzilog_alloc_tables();
+ if (num_sunzilog) {
+ err = sunzilog_alloc_tables(num_sunzilog);
if (err)
goto out;
- /* Subtract 1 for keyboard, 1 for mouse. */
- uart_count = (NUM_SUNZILOG * 2) - 2;
+ uart_chip_count = num_sunzilog - num_keybms;
- sunzilog_reg.nr = uart_count;
- sunzilog_reg.minor = sunserial_current_minor;
- err = uart_register_driver(&sunzilog_reg);
+ err = sunserial_register_minors(&sunzilog_reg,
+ uart_chip_count * 2);
if (err)
goto out_free_tables;
-
- sunzilog_reg.tty_driver->name_base = sunzilog_reg.minor - 64;
- sunzilog_reg.cons = SUNZILOG_CONSOLE();
-
- sunserial_current_minor += uart_count;
}
err = of_register_driver(&zs_driver, &of_bus_type);
goto out_unregister_uart;
if (zilog_irq != -1) {
+ struct uart_sunzilog_port *up = sunzilog_irq_chain;
err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
"zs", sunzilog_irq_chain);
if (err)
goto out_unregister_driver;
+
+ /* Enable Interrupts */
+ while (up) {
+ struct zilog_channel __iomem *channel;
+
+ /* printk (KERN_INFO "Enable IRQ for ZILOG Hardware %p\n", up); */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->flags |= SUNZILOG_FLAG_ISR_HANDLER;
+ up->curregs[R9] |= MIE;
+ write_zsreg(channel, R9, up->curregs[R9]);
+ up = up->next;
+ }
}
out:
of_unregister_driver(&zs_driver);
out_unregister_uart:
- if (NUM_SUNZILOG) {
- uart_unregister_driver(&sunzilog_reg);
+ if (num_sunzilog) {
+ sunserial_unregister_minors(&sunzilog_reg, num_sunzilog);
sunzilog_reg.cons = NULL;
}
of_unregister_driver(&zs_driver);
if (zilog_irq != -1) {
+ struct uart_sunzilog_port *up = sunzilog_irq_chain;
+
+ /* Disable Interrupts */
+ while (up) {
+ struct zilog_channel __iomem *channel;
+
+ /* printk (KERN_INFO "Disable IRQ for ZILOG Hardware %p\n", up); */
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->flags &= ~SUNZILOG_FLAG_ISR_HANDLER;
+ up->curregs[R9] &= ~MIE;
+ write_zsreg(channel, R9, up->curregs[R9]);
+ up = up->next;
+ }
+
free_irq(zilog_irq, sunzilog_irq_chain);
zilog_irq = -1;
}
- if (NUM_SUNZILOG) {
- uart_unregister_driver(&sunzilog_reg);
+ if (sunzilog_reg.nr) {
+ sunserial_unregister_minors(&sunzilog_reg, sunzilog_reg.nr);
sunzilog_free_tables();
}
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff