#include <linux/list.h>
#ifdef CONFIG_SUPERH
-#include <asm/clock.h>
#include <asm/sh_bios.h>
#endif
struct timer_list break_timer;
int break_flag;
-#ifdef CONFIG_HAVE_CLK
/* Interface clock */
struct clk *iclk;
/* Data clock */
struct clk *dclk;
-#endif
+
struct list_head node;
};
struct sh_sci_priv {
spinlock_t lock;
struct list_head ports;
-
-#ifdef CONFIG_HAVE_CLK
struct notifier_block clk_nb;
-#endif
};
/* Function prototypes */
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
-#if defined(__H8300S__)
-enum { sci_disable, sci_enable };
-
-static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
-{
- volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
- int ch = (port->mapbase - SMR0) >> 3;
- unsigned char mask = 1 << (ch+1);
-
- if (ctrl == sci_disable)
- *mstpcrl |= mask;
- else
- *mstpcrl &= ~mask;
-}
-
-static void h8300_sci_enable(struct uart_port *port)
-{
- h8300_sci_config(port, sci_enable);
-}
-
-static void h8300_sci_disable(struct uart_port *port)
-{
- h8300_sci_config(port, sci_disable);
-}
-#endif
-
#if defined(__H8300H__) || defined(__H8300S__)
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
Set SCP6MD1,0 = {01} (output) */
__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
- data = ctrl_inb(SCPDR);
+ data = __raw_readb(SCPDR);
/* Set /RTS2 (bit6) = 0 */
- ctrl_outb(data & 0xbf, SCPDR);
+ __raw_writeb(data & 0xbf, SCPDR);
}
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
return ret;
}
-#ifdef CONFIG_HAVE_CLK
/*
* Here we define a transistion notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
spin_lock_irqsave(&priv->lock, flags);
list_for_each_entry(sci_port, &priv->ports, node)
sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
-
spin_unlock_irqrestore(&priv->lock, flags);
}
clk_disable(sci_port->dclk);
}
-#endif
static int sci_request_irq(struct sci_port *port)
{
static unsigned int sci_tx_empty(struct uart_port *port)
{
- /* Can't detect */
- return TIOCSER_TEMT;
+ unsigned short status = sci_in(port, SCxSR);
+ return status & SCxSR_TEND(port) ? TIOCSER_TEMT : 0;
}
static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- unsigned int status, baud, smr_val;
+ unsigned int status, baud, smr_val, max_baud;
int t = -1;
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- if (likely(baud))
+ /*
+ * earlyprintk comes here early on with port->uartclk set to zero.
+ * the clock framework is not up and running at this point so here
+ * we assume that 115200 is the maximum baud rate. please note that
+ * the baud rate is not programmed during earlyprintk - it is assumed
+ * that the previous boot loader has enabled required clocks and
+ * setup the baud rate generator hardware for us already.
+ */
+ max_baud = port->uartclk ? port->uartclk / 16 : 115200;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
+ if (likely(baud && port->uartclk))
t = SCBRR_VALUE(baud, port->uartclk);
do {
sci_port->port.ops = &sci_uart_ops;
sci_port->port.iotype = UPIO_MEM;
sci_port->port.line = index;
- sci_port->port.fifosize = 1;
-#if defined(__H8300H__) || defined(__H8300S__)
-#ifdef __H8300S__
- sci_port->enable = h8300_sci_enable;
- sci_port->disable = h8300_sci_disable;
-#endif
- sci_port->port.uartclk = CONFIG_CPU_CLOCK;
-#elif defined(CONFIG_HAVE_CLK)
- sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
- sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
- sci_port->enable = sci_clk_enable;
- sci_port->disable = sci_clk_disable;
-#else
-#error "Need a valid uartclk"
-#endif
+ switch (p->type) {
+ case PORT_SCIFA:
+ sci_port->port.fifosize = 64;
+ break;
+ case PORT_SCIF:
+ sci_port->port.fifosize = 16;
+ break;
+ default:
+ sci_port->port.fifosize = 1;
+ break;
+ }
+
+ if (dev) {
+ sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+ sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
+ sci_port->enable = sci_clk_enable;
+ sci_port->disable = sci_clk_disable;
+ sci_port->port.dev = &dev->dev;
+ }
sci_port->break_timer.data = (unsigned long)sci_port;
sci_port->break_timer.function = sci_break_timer;
sci_port->port.irq = p->irqs[SCIx_TXI_IRQ];
sci_port->port.flags = p->flags;
- sci_port->port.dev = &dev->dev;
sci_port->type = sci_port->port.type = p->type;
memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
-
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
sci_port->disable(port);
}
-static int __init serial_console_setup(struct console *co, char *options)
+static int __devinit serial_console_setup(struct console *co, char *options)
{
struct sci_port *sci_port;
struct uart_port *port;
if (co->index >= SCI_NPORTS)
co->index = 0;
- sci_port = &sci_ports[co->index];
- port = &sci_port->port;
- co->data = port;
+ if (co->data) {
+ port = co->data;
+ sci_port = to_sci_port(port);
+ } else {
+ sci_port = &sci_ports[co->index];
+ port = &sci_port->port;
+ co->data = port;
+ }
/*
* Also need to check port->type, we don't actually have any
return 0;
}
console_initcall(sci_console_init);
+
+static struct sci_port early_serial_port;
+static struct console early_serial_console = {
+ .name = "early_ttySC",
+ .write = serial_console_write,
+ .flags = CON_PRINTBUFFER,
+};
+static char early_serial_buf[32];
+
#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
struct sci_port *p;
unsigned long flags;
-#ifdef CONFIG_HAVE_CLK
cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
spin_lock_irqsave(&priv->lock, flags);
list_for_each_entry(p, &priv->ports, node)
uart_remove_one_port(&sci_uart_driver, &p->port);
-
spin_unlock_irqrestore(&priv->lock, flags);
kfree(priv);
struct sh_sci_priv *priv;
int i, ret = -EINVAL;
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+ if (is_early_platform_device(dev)) {
+ if (dev->id == -1)
+ return -ENOTSUPP;
+ early_serial_console.index = dev->id;
+ early_serial_console.data = &early_serial_port.port;
+ sci_init_single(NULL, &early_serial_port, dev->id, p);
+ serial_console_setup(&early_serial_console, early_serial_buf);
+ if (!strstr(early_serial_buf, "keep"))
+ early_serial_console.flags |= CON_BOOT;
+ register_console(&early_serial_console);
+ return 0;
+ }
+#endif
+
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
spin_lock_init(&priv->lock);
platform_set_drvdata(dev, priv);
-#ifdef CONFIG_HAVE_CLK
priv->clk_nb.notifier_call = sci_notifier;
cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
if (dev->id != -1) {
ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
return 0;
}
-static struct dev_pm_ops sci_dev_pm_ops = {
+static const struct dev_pm_ops sci_dev_pm_ops = {
.suspend = sci_suspend,
.resume = sci_resume,
};
uart_unregister_driver(&sci_uart_driver);
}
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+early_platform_init_buffer("earlyprintk", &sci_driver,
+ early_serial_buf, ARRAY_SIZE(early_serial_buf));
+#endif
module_init(sci_init);
module_exit(sci_exit);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff