#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg)
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+#define PMACZILOG_MAJOR TTY_MAJOR
+#define PMACZILOG_MINOR 64
+#define PMACZILOG_NAME "ttyS"
+#else
+#define PMACZILOG_MAJOR 204
+#define PMACZILOG_MINOR 192
+#define PMACZILOG_NAME "ttyPZ"
+#endif
+
/*
* For the sake of early serial console, we can do a pre-probe
static struct uart_driver pmz_uart_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyS",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
+ .driver_name = PMACZILOG_NAME,
+ .dev_name = PMACZILOG_NAME,
+ .major = PMACZILOG_MAJOR,
+ .minor = PMACZILOG_MINOR,
};
}
}
-static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap,
- struct pt_regs *regs)
+static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
{
struct tty_struct *tty = NULL;
unsigned char ch, r1, drop, error, flag;
}
/* Sanity check, make sure the old bug is no longer happening */
- if (uap->port.info == NULL || uap->port.info->tty == NULL) {
+ if (uap->port.info == NULL || uap->port.info->port.tty == NULL) {
WARN_ON(1);
(void)read_zsdata(uap);
return NULL;
}
- tty = uap->port.info->tty;
+ tty = uap->port.info->port.tty;
while (1) {
error = 0;
if (uap->port.sysrq) {
int swallow;
spin_unlock(&uap->port.lock);
- swallow = uart_handle_sysrq_char(&uap->port, ch, regs);
+ swallow = uart_handle_sysrq_char(&uap->port, ch);
spin_lock(&uap->port.lock);
if (swallow)
goto next_char;
return tty;
}
-static void pmz_status_handle(struct uart_pmac_port *uap, struct pt_regs *regs)
+static void pmz_status_handle(struct uart_pmac_port *uap)
{
unsigned char status;
}
/* Hrm... we register that twice, fixme later.... */
-static irqreturn_t pmz_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t pmz_interrupt(int irq, void *dev_id)
{
struct uart_pmac_port *uap = dev_id;
struct uart_pmac_port *uap_a;
write_zsreg(uap_a, R0, RES_H_IUS);
zssync(uap_a);
if (r3 & CHAEXT)
- pmz_status_handle(uap_a, regs);
+ pmz_status_handle(uap_a);
if (r3 & CHARxIP)
- tty = pmz_receive_chars(uap_a, regs);
+ tty = pmz_receive_chars(uap_a);
if (r3 & CHATxIP)
pmz_transmit_chars(uap_a);
rc = IRQ_HANDLED;
write_zsreg(uap_b, R0, RES_H_IUS);
zssync(uap_b);
if (r3 & CHBEXT)
- pmz_status_handle(uap_b, regs);
+ pmz_status_handle(uap_b);
if (r3 & CHBRxIP)
- tty = pmz_receive_chars(uap_b, regs);
+ tty = pmz_receive_chars(uap_b);
if (r3 & CHBTxIP)
pmz_transmit_chars(uap_b);
rc = IRQ_HANDLED;
}
-static void __pmz_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pmac_port *uap = to_pmz(port);
unsigned long baud;
if (ZS_IS_ASLEEP(uap))
return;
- memcpy(&uap->termios_cache, termios, sizeof(struct termios));
+ memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
/* XXX Check which revs of machines actually allow 1 and 4Mb speeds
* on the IR dongle. Note that the IRTTY driver currently doesn't know
}
/* The port lock is not held. */
-static void pmz_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_pmac_port *uap = to_pmz(port);
unsigned long flags;
return -EINVAL;
}
+#ifdef CONFIG_CONSOLE_POLL
+
+static int pmz_poll_get_char(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0)
+ udelay(5);
+ return read_zsdata(uap);
+}
+
+static void pmz_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ struct uart_pmac_port *uap = (struct uart_pmac_port *)port;
+
+ /* Wait for the transmit buffer to empty. */
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+ udelay(5);
+ write_zsdata(uap, c);
+}
+
+#endif
+
static struct uart_ops pmz_pops = {
.tx_empty = pmz_tx_empty,
.set_mctrl = pmz_set_mctrl,
.request_port = pmz_request_port,
.config_port = pmz_config_port,
.verify_port = pmz_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = pmz_poll_get_char,
+ .poll_put_char = pmz_poll_put_char,
+#endif
};
/*
static int __init pmz_init_port(struct uart_pmac_port *uap)
{
struct device_node *np = uap->node;
- char *conn;
- struct slot_names_prop {
+ const char *conn;
+ const struct slot_names_prop {
int count;
char name[1];
} *slots;
/*
* Detect port type
*/
- if (device_is_compatible(np, "cobalt"))
+ if (of_device_is_compatible(np, "cobalt"))
uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
- conn = get_property(np, "AAPL,connector", &len);
+ conn = of_get_property(np, "AAPL,connector", &len);
if (conn && (strcmp(conn, "infrared") == 0))
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
uap->port_type = PMAC_SCC_ASYNC;
/* 1999 Powerbook G3 has slot-names property instead */
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ slots = of_get_property(np, "slot-names", &len);
if (slots && slots->count > 0) {
if (strcmp(slots->name, "IrDA") == 0)
uap->flags |= PMACZILOG_FLAG_IS_IRDA;
if (ZS_IS_IRDA(uap))
uap->port_type = PMAC_SCC_IRDA;
if (ZS_IS_INTMODEM(uap)) {
- struct device_node* i2c_modem = find_devices("i2c-modem");
+ struct device_node* i2c_modem =
+ of_find_node_by_name(NULL, "i2c-modem");
if (i2c_modem) {
- char* mid = get_property(i2c_modem, "modem-id", NULL);
+ const char* mid =
+ of_get_property(i2c_modem, "modem-id", NULL);
if (mid) switch(*mid) {
case 0x04 :
case 0x05 :
}
printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n",
mid ? (*mid) : 0);
+ of_node_put(i2c_modem);
} else {
printk(KERN_INFO "pmac_zilog: serial modem detected\n");
}
uap->port.type = PORT_PMAC_ZILOG;
uap->port.flags = 0;
+ /*
+ * Fixup for the port on Gatwick for which the device-tree has
+ * missing interrupts. Normally, the macio_dev would contain
+ * fixed up interrupt info, but we use the device-tree directly
+ * here due to early probing so we need the fixup too.
+ */
+ if (uap->port.irq == NO_IRQ &&
+ np->parent && np->parent->parent &&
+ of_device_is_compatible(np->parent->parent, "gatwick")) {
+ /* IRQs on gatwick are offset by 64 */
+ uap->port.irq = irq_create_mapping(NULL, 64 + 15);
+ uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4);
+ uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5);
+ }
+
/* Setup some valid baud rate information in the register
* shadows so we don't write crap there before baud rate is
* first initialized.
if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
return 0;
- pmz_debug("suspend, switching to state %d\n", pm_state);
+ pmz_debug("suspend, switching to state %d\n", pm_state.event);
state = pmz_uart_reg.state + uap->port.line;
static int __init pmz_console_setup(struct console *co, char *options);
static struct console pmz_console = {
- .name = "ttyS",
+ .name = PMACZILOG_NAME,
.write = pmz_console_write,
.device = uart_console_device,
.setup = pmz_console_setup,
pmz_uart_reg.nr = pmz_ports_count;
pmz_uart_reg.cons = PMACZILOG_CONSOLE;
- pmz_uart_reg.minor = 64;
/*
* Register this driver with the serial core
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff