wireless/p54: P54_SPI should depend on GENERIC_HARDIRQS
[safe/jmp/linux-2.6] / drivers / serial / mpc52xx_uart.c
index 28c00c3..0c3a2ab 100644 (file)
@@ -429,14 +429,24 @@ mpc52xx_uart_tx_empty(struct uart_port *port)
 static void
 mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-       /* Not implemented */
+       if (mctrl & TIOCM_RTS)
+               out_8(&PSC(port)->op1, MPC52xx_PSC_OP_RTS);
+       else
+               out_8(&PSC(port)->op0, MPC52xx_PSC_OP_RTS);
 }
 
 static unsigned int
 mpc52xx_uart_get_mctrl(struct uart_port *port)
 {
-       /* Not implemented */
-       return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+       unsigned int ret = TIOCM_DSR;
+       u8 status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+
+       if (!(status & MPC52xx_PSC_CTS))
+               ret |= TIOCM_CTS;
+       if (!(status & MPC52xx_PSC_DCD))
+               ret |= TIOCM_CAR;
+
+       return ret;
 }
 
 static void
@@ -479,7 +489,15 @@ mpc52xx_uart_stop_rx(struct uart_port *port)
 static void
 mpc52xx_uart_enable_ms(struct uart_port *port)
 {
-       /* Not implemented */
+       struct mpc52xx_psc __iomem *psc = PSC(port);
+
+       /* clear D_*-bits by reading them */
+       in_8(&psc->mpc52xx_psc_ipcr);
+       /* enable CTS and DCD as IPC interrupts */
+       out_8(&psc->mpc52xx_psc_acr, MPC52xx_PSC_IEC_CTS | MPC52xx_PSC_IEC_DCD);
+
+       port->read_status_mask |= MPC52xx_PSC_IMR_IPC;
+       out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
 }
 
 static void
@@ -580,6 +598,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
                        MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
                        MPC52xx_PSC_MODE_ONE_STOP;
 
+       if (new->c_cflag & CRTSCTS) {
+               mr1 |= MPC52xx_PSC_MODE_RXRTS;
+               mr2 |= MPC52xx_PSC_MODE_TXCTS;
+       }
 
        baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
        quot = uart_get_divisor(port, baud);
@@ -617,6 +639,9 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
        out_8(&psc->ctur, ctr >> 8);
        out_8(&psc->ctlr, ctr & 0xff);
 
+       if (UART_ENABLE_MS(port, new->c_cflag))
+               mpc52xx_uart_enable_ms(port);
+
        /* Reenable TX & RX */
        out_8(&psc->command, MPC52xx_PSC_TX_ENABLE);
        out_8(&psc->command, MPC52xx_PSC_RX_ENABLE);
@@ -752,10 +777,15 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
                        if (status & MPC52xx_PSC_SR_RB) {
                                flag = TTY_BREAK;
                                uart_handle_break(port);
-                       } else if (status & MPC52xx_PSC_SR_PE)
+                               port->icount.brk++;
+                       } else if (status & MPC52xx_PSC_SR_PE) {
                                flag = TTY_PARITY;
-                       else if (status & MPC52xx_PSC_SR_FE)
+                               port->icount.parity++;
+                       }
+                       else if (status & MPC52xx_PSC_SR_FE) {
                                flag = TTY_FRAME;
+                               port->icount.frame++;
+                       }
 
                        /* Clear error condition */
                        out_8(&PSC(port)->command, MPC52xx_PSC_RST_ERR_STAT);
@@ -769,6 +799,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
                         * affect the current character
                         */
                        tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+                       port->icount.overrun++;
                }
        }
 
@@ -826,6 +857,7 @@ mpc52xx_uart_int(int irq, void *dev_id)
        struct uart_port *port = dev_id;
        unsigned long pass = ISR_PASS_LIMIT;
        unsigned int keepgoing;
+       u8 status;
 
        spin_lock(&port->lock);
 
@@ -842,6 +874,13 @@ mpc52xx_uart_int(int irq, void *dev_id)
                if (psc_ops->tx_rdy(port))
                        keepgoing |= mpc52xx_uart_int_tx_chars(port);
 
+               status = in_8(&PSC(port)->mpc52xx_psc_ipcr);
+               if (status & MPC52xx_PSC_D_DCD)
+                       uart_handle_dcd_change(port, !(status & MPC52xx_PSC_DCD));
+
+               if (status & MPC52xx_PSC_D_CTS)
+                       uart_handle_cts_change(port, !(status & MPC52xx_PSC_CTS));
+
                /* Limit number of iteration */
                if (!(--pass))
                        keepgoing = 0;
@@ -1109,22 +1148,29 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match)
                return ret;
 
        port->mapbase = res.start;
+       if (!port->mapbase) {
+               dev_dbg(&op->dev, "Could not allocate resources for PSC\n");
+               return -EINVAL;
+       }
+
        port->irq = irq_of_parse_and_map(op->node, 0);
+       if (port->irq == NO_IRQ) {
+               dev_dbg(&op->dev, "Could not get irq\n");
+               return -EINVAL;
+       }
 
        dev_dbg(&op->dev, "mpc52xx-psc uart at %p, irq=%x, freq=%i\n",
                (void *)port->mapbase, port->irq, port->uartclk);
 
-       if ((port->irq == NO_IRQ) || !port->mapbase) {
-               printk(KERN_ERR "Could not allocate resources for PSC\n");
-               return -EINVAL;
-       }
-
        /* Add the port to the uart sub-system */
        ret = uart_add_one_port(&mpc52xx_uart_driver, port);
-       if (!ret)
-               dev_set_drvdata(&op->dev, (void *)port);
+       if (ret) {
+               irq_dispose_mapping(port->irq);
+               return ret;
+       }
 
-       return ret;
+       dev_set_drvdata(&op->dev, (void *)port);
+       return 0;
 }
 
 static int