#include "jsm.h"
+static DECLARE_BITMAP(linemap, MAXLINES);
+
static void jsm_carrier(struct jsm_channel *ch);
static inline int jsm_get_mstat(struct jsm_channel *ch)
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
+ struct ktermios *termios;
spin_lock_irqsave(&port->lock, lock_flags);
- if (ch == port->info->tty->termios->c_cc[VSTART])
+ termios = port->state->port.tty->termios;
+ if (ch == termios->c_cc[VSTART])
channel->ch_bd->bd_ops->send_start_character(channel);
- if (ch == port->info->tty->termios->c_cc[VSTOP])
+ if (ch == termios->c_cc[VSTOP])
channel->ch_bd->bd_ops->send_stop_character(channel);
spin_unlock_irqrestore(&port->lock, lock_flags);
}
channel->ch_bd->bd_ops->disable_receiver(channel);
}
+static void jsm_tty_enable_ms(struct uart_port *port)
+{
+ /* Nothing needed */
+}
+
static void jsm_tty_break(struct uart_port *port, int break_state)
{
unsigned long lock_flags;
static int jsm_tty_open(struct uart_port *port)
{
struct jsm_board *brd;
- int rc = 0;
struct jsm_channel *channel = (struct jsm_channel *)port;
+ struct ktermios *termios;
/* Get board pointer from our array of majors we have allocated */
brd = channel->ch_bd;
/* Drop locks, as malloc with GFP_KERNEL can sleep */
if (!channel->ch_rqueue) {
- channel->ch_rqueue = (u8 *) kmalloc(RQUEUESIZE, GFP_KERNEL);
+ channel->ch_rqueue = kzalloc(RQUEUESIZE, GFP_KERNEL);
if (!channel->ch_rqueue) {
jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
"unable to allocate read queue buf");
return -ENOMEM;
}
- memset(channel->ch_rqueue, 0, RQUEUESIZE);
}
if (!channel->ch_equeue) {
- channel->ch_equeue = (u8 *) kmalloc(EQUEUESIZE, GFP_KERNEL);
+ channel->ch_equeue = kzalloc(EQUEUESIZE, GFP_KERNEL);
if (!channel->ch_equeue) {
jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
"unable to allocate error queue buf");
return -ENOMEM;
}
- memset(channel->ch_equeue, 0, EQUEUESIZE);
}
if (!channel->ch_wqueue) {
- channel->ch_wqueue = (u8 *) kmalloc(WQUEUESIZE, GFP_KERNEL);
+ channel->ch_wqueue = kzalloc(WQUEUESIZE, GFP_KERNEL);
if (!channel->ch_wqueue) {
jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
"unable to allocate write queue buf");
return -ENOMEM;
}
- memset(channel->ch_wqueue, 0, WQUEUESIZE);
}
channel->ch_flags &= ~(CH_OPENING);
channel->ch_cached_lsr = 0;
channel->ch_stops_sent = 0;
- channel->ch_c_cflag = port->info->tty->termios->c_cflag;
- channel->ch_c_iflag = port->info->tty->termios->c_iflag;
- channel->ch_c_oflag = port->info->tty->termios->c_oflag;
- channel->ch_c_lflag = port->info->tty->termios->c_lflag;
- channel->ch_startc = port->info->tty->termios->c_cc[VSTART];
- channel->ch_stopc = port->info->tty->termios->c_cc[VSTOP];
+ termios = port->state->port.tty->termios;
+ channel->ch_c_cflag = termios->c_cflag;
+ channel->ch_c_iflag = termios->c_iflag;
+ channel->ch_c_oflag = termios->c_oflag;
+ channel->ch_c_lflag = termios->c_lflag;
+ channel->ch_startc = termios->c_cc[VSTART];
+ channel->ch_stopc = termios->c_cc[VSTOP];
/* Tell UART to init itself */
brd->bd_ops->uart_init(channel);
channel->ch_open_count++;
jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n");
- return rc;
+ return 0;
}
static void jsm_tty_close(struct uart_port *port)
{
struct jsm_board *bd;
- struct termios *ts;
+ struct ktermios *ts;
struct jsm_channel *channel = (struct jsm_channel *)port;
jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
bd = channel->ch_bd;
- ts = channel->uart_port.info->tty->termios;
+ ts = port->state->port.tty->termios;
channel->ch_flags &= ~(CH_STOPI);
bd->bd_ops->assert_modem_signals(channel);
}
- channel->ch_old_baud = 0;
-
/* Turn off UART interrupts for this port */
channel->ch_bd->bd_ops->uart_off(channel);
}
static void jsm_tty_set_termios(struct uart_port *port,
- struct termios *termios,
- struct termios *old_termios)
+ struct ktermios *termios,
+ struct ktermios *old_termios)
{
unsigned long lock_flags;
struct jsm_channel *channel = (struct jsm_channel *)port;
.start_tx = jsm_tty_start_tx,
.send_xchar = jsm_tty_send_xchar,
.stop_rx = jsm_tty_stop_rx,
+ .enable_ms = jsm_tty_enable_ms,
.break_ctl = jsm_tty_break,
.startup = jsm_tty_open,
.shutdown = jsm_tty_close,
* Init the tty subsystem. Called once per board after board has been
* downloaded and init'ed.
*/
-int jsm_tty_init(struct jsm_board *brd)
+int __devinit jsm_tty_init(struct jsm_board *brd)
{
int i;
void __iomem *vaddr;
* Okay to malloc with GFP_KERNEL, we are not at
* interrupt context, and there are no locks held.
*/
- brd->channels[i] = kmalloc(sizeof(struct jsm_channel), GFP_KERNEL);
+ brd->channels[i] = kzalloc(sizeof(struct jsm_channel), GFP_KERNEL);
if (!brd->channels[i]) {
jsm_printk(CORE, ERR, &brd->pci_dev,
"%s:%d Unable to allocate memory for channel struct\n",
__FILE__, __LINE__);
}
- memset(brd->channels[i], 0, sizeof(struct jsm_channel));
}
}
int jsm_uart_port_init(struct jsm_board *brd)
{
int i;
+ unsigned int line;
struct jsm_channel *ch;
if (!brd)
continue;
brd->channels[i]->uart_port.irq = brd->irq;
+ brd->channels[i]->uart_port.uartclk = 14745600;
brd->channels[i]->uart_port.type = PORT_JSM;
brd->channels[i]->uart_port.iotype = UPIO_MEM;
brd->channels[i]->uart_port.membase = brd->re_map_membase;
brd->channels[i]->uart_port.fifosize = 16;
brd->channels[i]->uart_port.ops = &jsm_ops;
- brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+ line = find_first_zero_bit(linemap, MAXLINES);
+ if (line >= MAXLINES) {
+ printk(KERN_INFO "jsm: linemap is full, added device failed\n");
+ continue;
+ } else
+ set_bit(line, linemap);
+ brd->channels[i]->uart_port.line = line;
if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
- printk(KERN_INFO "Added device failed\n");
+ printk(KERN_INFO "jsm: add device failed\n");
else
- printk(KERN_INFO "Added device \n");
+ printk(KERN_INFO "jsm: Port %d added\n", i);
}
jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
ch = brd->channels[i];
+ clear_bit(ch->uart_port.line, linemap);
uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
}
{
struct jsm_board *bd;
struct tty_struct *tp;
- struct tty_ldisc *ld;
u32 rmask;
u16 head;
u16 tail;
int data_len;
unsigned long lock_flags;
- int flip_len = 0;
int len = 0;
int n = 0;
int s = 0;
if (!ch)
return;
- tp = ch->uart_port.info->tty;
+ tp = ch->uart_port.state->port.tty;
bd = ch->ch_bd;
if(!bd)
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n");
- /*
- * If the rxbuf is empty and we are not throttled, put as much
- * as we can directly into the linux TTY buffer.
- *
- */
- flip_len = TTY_FLIPBUF_SIZE;
-
- len = min(data_len, flip_len);
- len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt);
- ld = tty_ldisc_ref(tp);
-
- /*
- * If the DONT_FLIP flag is on, don't flush our buffer, and act
- * like the ld doesn't have any space to put the data right now.
- */
- if (test_bit(TTY_DONT_FLIP, &tp->flags))
- len = 0;
-
- /*
- * If we were unable to get a reference to the ld,
- * don't flush our buffer, and act like the ld doesn't
- * have any space to put the data right now.
- */
- if (!ld) {
- len = 0;
- } else {
- /*
- * If ld doesn't have a pointer to a receive_buf function,
- * flush the data, then act like the ld doesn't have any
- * space to put the data right now.
- */
- if (!ld->receive_buf) {
- ch->ch_r_head = ch->ch_r_tail;
- len = 0;
- }
- }
-
- if (len <= 0) {
+ if (data_len <= 0) {
spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
- if (ld)
- tty_ldisc_deref(ld);
return;
}
- len = tty_buffer_request_room(tp, len);
+ len = tty_buffer_request_room(tp, data_len);
n = len;
/*
else if (*(ch->ch_equeue +tail +i) & UART_LSR_FE)
tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_FRAME);
else
- tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL);
+ tty_insert_flip_char(tp, *(ch->ch_rqueue +tail +i), TTY_NORMAL);
}
} else {
tty_insert_flip_string(tp, ch->ch_rqueue + tail, s) ;
/* Tell the tty layer its okay to "eat" the data now */
tty_flip_buffer_push(tp);
- if (ld)
- tty_ldisc_deref(ld);
-
jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
}
void jsm_check_queue_flow_control(struct jsm_channel *ch)
{
- int qleft = 0;
+ struct board_ops *bd_ops = ch->ch_bd->bd_ops;
+ int qleft;
/* Store how much space we have left in the queue */
if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0)
/* HWFLOW */
if (ch->ch_c_cflag & CRTSCTS) {
if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
- ch->ch_bd->bd_ops->disable_receiver(ch);
+ bd_ops->disable_receiver(ch);
ch->ch_flags |= (CH_RECEIVER_OFF);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
/* SWFLOW */
else if (ch->ch_c_iflag & IXOFF) {
if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
- ch->ch_bd->bd_ops->send_stop_character(ch);
+ bd_ops->send_stop_character(ch);
ch->ch_stops_sent++;
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
/* HWFLOW */
if (ch->ch_c_cflag & CRTSCTS) {
if (ch->ch_flags & CH_RECEIVER_OFF) {
- ch->ch_bd->bd_ops->enable_receiver(ch);
+ bd_ops->enable_receiver(ch);
ch->ch_flags &= ~(CH_RECEIVER_OFF);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
"Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
/* SWFLOW */
else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
ch->ch_stops_sent = 0;
- ch->ch_bd->bd_ops->send_start_character(ch);
+ bd_ops->send_start_character(ch);
jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
}
}
*/
int jsm_tty_write(struct uart_port *port)
{
- int bufcount = 0, n = 0;
+ int bufcount;
int data_count = 0,data_count1 =0;
u16 head;
u16 tail;
u16 tmask;
u32 remain;
- int temp_tail = port->info->xmit.tail;
+ int temp_tail = port->state->xmit.tail;
struct jsm_channel *channel = (struct jsm_channel *)port;
tmask = WQUEUEMASK;
if ((bufcount = tail - head - 1) < 0)
bufcount += WQUEUESIZE;
- n = bufcount;
-
- n = min(n, 56);
+ bufcount = min(bufcount, 56);
remain = WQUEUESIZE - head;
data_count = 0;
- if (n >= remain) {
- n -= remain;
- while ((port->info->xmit.head != temp_tail) &&
+ if (bufcount >= remain) {
+ bufcount -= remain;
+ while ((port->state->xmit.head != temp_tail) &&
(data_count < remain)) {
channel->ch_wqueue[head++] =
- port->info->xmit.buf[temp_tail];
+ port->state->xmit.buf[temp_tail];
temp_tail++;
temp_tail &= (UART_XMIT_SIZE - 1);
}
data_count1 = 0;
- if (n > 0) {
- remain = n;
- while ((port->info->xmit.head != temp_tail) &&
+ if (bufcount > 0) {
+ remain = bufcount;
+ while ((port->state->xmit.head != temp_tail) &&
(data_count1 < remain)) {
channel->ch_wqueue[head++] =
- port->info->xmit.buf[temp_tail];
+ port->state->xmit.buf[temp_tail];
temp_tail++;
temp_tail &= (UART_XMIT_SIZE - 1);
}
}
- port->info->xmit.tail = temp_tail;
+ port->state->xmit.tail = temp_tail;
data_count += data_count1;
if (data_count) {
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff