#include <linux/pci.h>
#include <linux/serial_core.h>
#include <linux/ioc3.h>
+#include <linux/slab.h>
/*
* Interesting things about the ioc3
char *start;
struct tty_struct *tty;
struct ioc3_port *port = get_ioc3_port(the_port);
- struct uart_info *info;
+ struct uart_state *state;
if (!the_port)
return;
if (!port)
return;
- info = the_port->info;
- tty = info->port.tty;
+ state = the_port->state;
+ tty = state->port.tty;
- if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+ if (uart_circ_empty(&state->xmit) || uart_tx_stopped(the_port)) {
/* Nothing to do or hw stopped */
set_notification(port, N_ALL_OUTPUT, 0);
return;
}
- head = info->xmit.head;
- tail = info->xmit.tail;
- start = (char *)&info->xmit.buf[tail];
+ head = state->xmit.head;
+ tail = state->xmit.tail;
+ start = (char *)&state->xmit.buf[tail];
/* write out all the data or until the end of the buffer */
xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
/* advance the pointers */
tail += result;
tail &= UART_XMIT_SIZE - 1;
- info->xmit.tail = tail;
- start = (char *)&info->xmit.buf[tail];
+ state->xmit.tail = tail;
+ start = (char *)&state->xmit.buf[tail];
}
}
- if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(&state->xmit) < WAKEUP_CHARS)
uart_write_wakeup(the_port);
- if (uart_circ_empty(&info->xmit)) {
+ if (uart_circ_empty(&state->xmit)) {
set_notification(port, N_OUTPUT_LOWAT, 0);
} else {
set_notification(port, N_OUTPUT_LOWAT, 1);
unsigned int cflag;
int baud;
int new_parity = 0, new_parity_enable = 0, new_stop = 0, new_data = 8;
- struct uart_info *info = the_port->info;
+ struct uart_state *state = the_port->state;
cflag = new_termios->c_cflag;
the_port->ignore_status_mask = N_ALL_INPUT;
- info->port.tty->low_latency = 1;
+ state->port.tty->low_latency = 1;
- if (I_IGNPAR(info->port.tty))
+ if (I_IGNPAR(state->port.tty))
the_port->ignore_status_mask &= ~(N_PARITY_ERROR
| N_FRAMING_ERROR);
- if (I_IGNBRK(info->port.tty)) {
+ if (I_IGNBRK(state->port.tty)) {
the_port->ignore_status_mask &= ~N_BREAK;
- if (I_IGNPAR(info->port.tty))
+ if (I_IGNPAR(state->port.tty))
the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
}
if (!(cflag & CREAD)) {
uart_handle_dcd_change
(port->ip_port, 0);
wake_up_interruptible
- (&the_port->info->
- delta_msr_wait);
+ (&the_port->state->
+ port.delta_msr_wait);
}
/* If we had any data to return, we
struct tty_struct *tty;
unsigned char ch[MAX_CHARS];
int read_count = 0, read_room, flip = 0;
- struct uart_info *info = the_port->info;
+ struct uart_state *state = the_port->state;
struct ioc3_port *port = get_ioc3_port(the_port);
unsigned long pflags;
/* Make sure all the pointers are "good" ones */
- if (!info)
+ if (!state)
return 0;
- if (!info->port.tty)
+ if (!state->port.tty)
return 0;
if (!(port->ip_flags & INPUT_ENABLE))
return 0;
spin_lock_irqsave(&the_port->lock, pflags);
- tty = info->port.tty;
+ tty = state->port.tty;
read_count = do_read(the_port, ch, MAX_CHARS);
if (read_count > 0) {
flip = 1;
- read_room = tty_buffer_request_room(tty, read_count);
- tty_insert_flip_string(tty, ch, read_room);
+ read_room = tty_insert_flip_string(tty, ch, read_count);
the_port->icount.rx += read_count;
}
spin_unlock_irqrestore(&the_port->lock, pflags);
uart_handle_dcd_change(the_port,
shadow & SHADOW_DCD);
wake_up_interruptible
- (&the_port->info->delta_msr_wait);
+ (&the_port->state->port.delta_msr_wait);
} else if ((port->ip_notify & N_DDCD)
&& !(shadow & SHADOW_DCD)) {
/* Flag delta DCD/no DCD */
uart_handle_cts_change(the_port, shadow
& SHADOW_CTS);
wake_up_interruptible
- (&the_port->info->delta_msr_wait);
+ (&the_port->state->port.delta_msr_wait);
}
}
{
unsigned long port_flags;
struct ioc3_port *port;
- struct uart_info *info;
+ struct uart_state *state;
port = get_ioc3_port(the_port);
if (!port)
return;
- info = the_port->info;
- wake_up_interruptible(&info->delta_msr_wait);
+ state = the_port->state;
+ wake_up_interruptible(&state->port.delta_msr_wait);
spin_lock_irqsave(&the_port->lock, port_flags);
set_notification(port, N_ALL, 0);
/**
* ioc3_detect - module init called,
*/
-static int __devinit ioc3uart_init(void)
+static int __init ioc3uart_init(void)
{
int ret;
return ret;
}
-static void __devexit ioc3uart_exit(void)
+static void __exit ioc3uart_exit(void)
{
ioc3_unregister_submodule(&ioc3uart_ops);
uart_unregister_driver(&ioc3_uart);