* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $
- *
*/
-#include <linux/config.h>
#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/io.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
+#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/hardware/clps7111.h>
{
}
-static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct tty_struct *tty = port->info->tty;
+ struct tty_struct *tty = port->state->port.tty;
unsigned int status, ch, flg;
status = clps_readl(SYSFLG(port));
#endif
}
- if (uart_handle_sysrq_char(port, ch, regs))
+ if (uart_handle_sysrq_char(port, ch))
goto ignore_char;
/*
return IRQ_HANDLED;
}
-static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
int count;
if (port->x_char) {
}
static void
-clps711xuart_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
unsigned int ubrlcr, baud, quot;
unsigned long flags;
.fifosize = 16,
.ops = &clps711x_pops,
.line = 0,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
},
{
.iobase = SYSCON2,
.fifosize = 16,
.ops = &clps711x_pops,
.line = 1,
- .flags = ASYNC_BOOT_AUTOCONF,
+ .flags = UPF_BOOT_AUTOCONF,
}
};
#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+static void clps711xuart_console_putchar(struct uart_port *port, int ch)
+{
+ while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
+ barrier();
+ clps_writel(ch, UARTDR(port));
+}
+
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
{
struct uart_port *port = clps711x_ports + co->index;
unsigned int status, syscon;
- int i;
/*
* Ensure that the port is enabled.
syscon = clps_readl(SYSCON(port));
clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
- /*
- * Now, do each character
- */
- for (i = 0; i < count; i++) {
- do {
- status = clps_readl(SYSFLG(port));
- } while (status & SYSFLG_UTXFF);
- clps_writel(s[i], UARTDR(port));
- if (s[i] == '\n') {
- do {
- status = clps_readl(SYSFLG(port));
- } while (status & SYSFLG_UTXFF);
- clps_writel('\r', UARTDR(port));
- }
- }
+ uart_console_write(port, s, count, clps711xuart_console_putchar);
/*
* Finally, wait for transmitter to become empty
{
int ret, i;
- printk(KERN_INFO "Serial: CLPS711x driver $Revision: 1.42 $\n");
+ printk(KERN_INFO "Serial: CLPS711x driver\n");
ret = uart_register_driver(&clps711x_reg);
if (ret)
module_exit(clps711xuart_exit);
MODULE_AUTHOR("Deep Blue Solutions Ltd");
-MODULE_DESCRIPTION("CLPS-711x generic serial driver $Revision: 1.42 $");
+MODULE_DESCRIPTION("CLPS-711x generic serial driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);