drivers/video/msm: update to new kernel

[safe/jmp/linux-2.6] / drivers / serial / 21285.c

diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 0276471..1e3d193 100644 (file)
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -4,8 +4,6 @@
  * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
  *
  * Based on drivers/char/serial.c
- *
- *  $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
  */
 #include <linux/module.h>
 #include <linux/tty.h>
@@ -16,12 +14,12 @@
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/dec21285.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define BAUD_BASE              (mem_fclk_21285/64)
 
@@ -88,7 +86,7 @@ static void serial21285_enable_ms(struct uart_port *port)
 static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 {
        struct uart_port *port = dev_id;
-       struct tty_struct *tty = port->info->tty;
+       struct tty_struct *tty = port->state->port.tty;
        unsigned int status, ch, flag, rxs, max_count = 256;
 
        status = *CSR_UARTFLG;
@@ -126,7 +124,7 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id)
 static irqreturn_t serial21285_tx_chars(int irq, void *dev_id)
 {
        struct uart_port *port = dev_id;
-       struct circ_buf *xmit = &port->info->xmit;
+       struct circ_buf *xmit = &port->state->xmit;
        int count = 256;
 
        if (port->x_char) {
@@ -237,8 +235,8 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
        baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
        quot = uart_get_divisor(port, baud);
 
-       if (port->info && port->info->tty) {
-               struct tty_struct *tty = port->info->tty;
+       if (port->state && port->state->port.tty) {
+               struct tty_struct *tty = port->state->port.tty;
                unsigned int b = port->uartclk / (16 * quot);
                tty_encode_baud_rate(tty, b, b);
        }
@@ -494,7 +492,7 @@ static int __init serial21285_init(void)
 {
        int ret;
 
-       printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n");
+       printk(KERN_INFO "Serial: 21285 driver\n");
 
        serial21285_setup_ports();
 
@@ -515,5 +513,5 @@ module_init(serial21285_init);
 module_exit(serial21285_exit);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $");
+MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver");
 MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);